Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...

1 files changed, 37 insertions, 12 deletions

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index d6c69ec44314..f74a8ded515f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -53,6 +53,7 @@
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
 	};
 
 	clocks {
@@ -82,7 +83,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
 		ranges;
 
 		dma_apbh: dma-apbh@00110000 {
@@ -122,6 +123,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			interrupt-parent = <&intc>;
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
@@ -357,6 +359,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM1>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm2: pwm@02084000 {
@@ -367,6 +370,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM2>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm3: pwm@02088000 {
@@ -377,6 +381,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM3>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm4: pwm@0208c000 {
@@ -387,6 +392,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM4>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			can1: flexcan@02090000 {
@@ -598,7 +604,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
+					regulator-enable-ramp-delay = <150>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -658,7 +664,7 @@
 				#size-cells = <1>;
 				ranges = <0 0x020cc000 0x4000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -693,8 +699,19 @@
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				pu-supply = <&reg_pu>;
+				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+					 <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+					 <&clks IMX6QDL_CLK_GPU2D_CORE>,
+					 <&clks IMX6QDL_CLK_GPU2D_AXI>,
+					 <&clks IMX6QDL_CLK_OPENVG_AXI>,
+					 <&clks IMX6QDL_CLK_VPU_AXI>;
+				#power-domain-cells = <1>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -845,6 +862,7 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -854,6 +872,7 @@
 				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -863,6 +882,7 @@
 				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -1022,19 +1042,24 @@
 				reg = <0x021e0000 0x4000>;
 				status = "disabled";
 
-				port@0 {
-					reg = <0>;
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
 
-					mipi_mux_0: endpoint {
-						remote-endpoint = <&ipu1_di0_mipi>;
+						mipi_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_mipi>;
+						};
 					};
-				};
 
-				port@1 {
-					reg = <1>;
+					port@1 {
+						reg = <1>;
 
-					mipi_mux_1: endpoint {
-						remote-endpoint = <&ipu1_di1_mipi>;
+						mipi_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_mipi>;
+						};
 					};
 				};
 			};