ARM: dts: imx6-tx6: move display configuration to .dtsi file

Currently the display (LCD or LVDS) configuration is duplicated with
slight variations in each TX6 module specific file.

Move it to an include file for simplification and consistency.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 10 insertions, 64 deletions

diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index d3ee1f52ee85..ac3050a835e5 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
 
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
 };
 
 &can1 {
@@ -116,14 +62,14 @@
 	xceiver-supply = <&reg_3v3>;
 };
 
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
 &kpp {
 	status = "disabled";
 };
 
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
 &reg_can_xcvr {
 	status = "disabled";
 };