Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Device tree and bindings updates for 3.12.

  General additions of various on-chip and on-board peripherals on
  various platforms as support gets added.  Some of the bigger changes
  are:

   - Addition of (new) PCI-e support on Tegra.
   - More Tegra4 support, including PMC configuration for Dalmore.
   - Addition of a new board for Exynos4 (trats2) and more bindings for
     4x12 IP.
   - Addition of Allwinner A20 and A31 SoC and board files.
   - Move of the ST Ericsson device tree files to now use ste-* prefix.
   - More move of hardware description of shmobile platforms to DT.
   - Two new board dts files for Freescale MXs"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
  dts: Rename DW APB timer compatible strings
  dts: Deprecate ALTR as a vendor prefix
  of: add vendor prefix for Altera Corp.
  ARM: at91/dt: sam9x5ek: add sound configuration
  ARM: at91/dt: sam9x5ek: enable SSC
  ARM: at91/dt: sam9x5ek: add WM8731 codec
  ARM: at91/dt: sam9x5: add SSC DMA parameters
  ARM: at91/dt: add at91rm9200 PQFP package version
  ARM: at91: at91rm9200: set default mmc0 pinctrl-names
  ARM: at91: at91sam9n12: correct pin number of gpio-key
  ARM: at91: at91sam9n12: add qt1070 support
  ARM: at91: at91sam9n12: add pinctrl of TWI
  ARM: at91: Add PMU support for sama5d3
  ARM: at91: at91sam9260: add missing pinctrl-names on mmc
  ARM: tegra: configure power off for Dalmore
  ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
  ARM: dts: add sdio blocks to bcm28155-ap board
  ARM: dts: align sdio numbers to HW definition
  ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
  ARM: sun7i: Add Allwinner A20 DTSI
  ...

1 files changed, 92 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272c7afd..452d0b04d273 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -37,6 +38,28 @@
 		s5m8767_pmic@66 {
 			compatible = "samsung,s5m8767-pmic";
 			reg = <0x66>;
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			vinb1-supply = <&main_dc_reg>;
+			vinb2-supply = <&main_dc_reg>;
+			vinb3-supply = <&main_dc_reg>;
+			vinb4-supply = <&main_dc_reg>;
+			vinb5-supply = <&main_dc_reg>;
+			vinb6-supply = <&main_dc_reg>;
+			vinb7-supply = <&main_dc_reg>;
+			vinb8-supply = <&main_dc_reg>;
+			vinb9-supply = <&main_dc_reg>;
+
+			vinl1-supply = <&buck7_reg>;
+			vinl2-supply = <&buck7_reg>;
+			vinl3-supply = <&buck7_reg>;
+			vinl4-supply = <&main_dc_reg>;
+			vinl5-supply = <&main_dc_reg>;
+			vinl6-supply = <&main_dc_reg>;
+			vinl7-supply = <&main_dc_reg>;
+			vinl8-supply = <&buck8_reg>;
+			vinl9-supply = <&buck8_reg>;
 
 			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
 			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
@@ -276,6 +299,16 @@
 					op_mode = <1>;
 				};
 
+				buck7_reg: BUCK7 {
+					regulator-name = "PVDD_BUCK7";
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "PVDD_BUCK8";
+					regulator-always-on;
+				};
+
 				buck9_reg: BUCK9 {
 					regulator-name = "VDD_33_OFF_EXT1";
 					regulator-min-microvolt = <750000>;
@@ -295,7 +328,22 @@
 	};
 
 	i2c@12C90000 {
-		status = "disabled";
+		wm1811a@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+
+			AVDD2-supply = <&main_dc_reg>;
+			CPVDD-supply = <&main_dc_reg>;
+			DBVDD1-supply = <&main_dc_reg>;
+			DBVDD2-supply = <&main_dc_reg>;
+			DBVDD3-supply = <&main_dc_reg>;
+			LDO1VDD-supply = <&main_dc_reg>;
+			SPKVDD1-supply = <&main_dc_reg>;
+			SPKVDD2-supply = <&main_dc_reg>;
+
+			wlf,ldo1ena = <&gpb0 0 0>;
+			wlf,ldo2ena = <&gpb0 1 0>;
+		};
 	};
 
 	i2c@12CA0000 {
@@ -429,18 +477,29 @@
 		vdd-supply = <&ldo8_reg>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_33ON_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 1>;
-		enable-active-high;
-	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	reg_hdmi_en: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
+		main_dc_reg: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "MAIN_DC";
+		};
+
+		mmc_reg: voltage-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 1>;
+			enable-active-high;
+		};
+
+		reg_hdmi_en: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "hdmi-en";
+		};
 	};
 
 	fixed-rate-clocks {
@@ -450,16 +509,18 @@
 		};
 	};
 
-	dp-controller {
+	dp-controller@145B0000 {
 		samsung,color-space = <0>;
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
 		samsung,color-depth = <1>;
 		samsung,link-rate = <0x0a>;
 		samsung,lane-count = <4>;
+		status = "okay";
 	};
 
 	fimd: fimd@14400000 {
+		status = "okay";
 		display-timings {
 			native-mode = <&timing0>;
 			timing0: timing@0 {
@@ -480,4 +541,22 @@
 	rtc {
 		status = "okay";
 	};
+
+	usb_hub_bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// SMSC USB3503 connected in hardware only mode as a PHY
+		usb_hub: usb_hub {
+			compatible = "smsc,usb3503a";
+
+			reset-gpios = <&gpx3 5 1>;
+			connect-gpios = <&gpd1 7 1>;
+		};
+	};
+
+	usb@12110000 {
+		usb-phy = <&usb2_phy>;
+	};
 };