Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Ladies and gentlemen, we proudly announce to you the latest branch of
  ARM device tree contents for the mainline kernel.  Come and see, come
  and see!

  No less than twentythree thousand lines of additions! Just imagine the
  joy you will have of using your mainline kernel on newly supported
  hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
  UniPhier hardware!

  For those of you feeling less adventurous, added hardware support on
  platforms such as TI DM814x and Gumstix Overo platforms might be more
  of your liking.

  We've got something for everyone here!

  Ahem.  Cough.  So, anyway...

  This is the usual large batch of DT updates.  Lots and lots of smaller
  changes, some of the larger ones to point out are:

   - Rockchip veyron (Chromebook) support, as well as several other new boards
   - DRM support on Atmel AT91SAM9N12EK
   - USB additions on some Allwinner platforms
   - Mediatek MT6580 support
   - Freescale i.MX6UL support
   - cleanups for Renesas shmobile platforms
   - lots of added devices on LPC18xx
   - lots of added devices and boards on UniPhier

  There's also some dependent code added here, in particular some
  branches that are primarily merged through the clock tree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
  ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
  ARM: dts: rockchip: correct regulator power states for suspend
  ARM: dts: rockchip: correct regulator PM properties
  ARM: dts: vexpress: Use assigned-clock-parents for sp810
  pinctrl: tegra: Only set the gpio range if needed
  arm: boot: dts: am4372: add ARM timers and SCU nodes
  ARM: dts: AM4372: Add the am4372-rtc compatible string
  ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
  ...

1 files changed, 57 insertions, 38 deletions

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index b058b3146874..a0d3d4bfe9cb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -141,7 +141,7 @@
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
+					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#interrupt-cells = <1>;
@@ -149,6 +149,11 @@
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x3fffffff>;
 				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -286,16 +291,6 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -308,6 +303,15 @@
 			dma-requests = <127>;
 		};
 
+		sdma_xbar: dma-router@4a002b78 {
+			compatible = "ti,dra7-dma-crossbar";
+			reg = <0x4a002b78 0xfc>;
+			#dma-cells = <1>;
+			dma-requests = <205>;
+			ti,dma-safe-map = <0>;
+			dma-masters = <&sdma>;
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -403,7 +407,7 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 			dma-names = "tx", "rx";
 		};
 
@@ -414,7 +418,7 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 			dma-names = "tx", "rx";
 		};
 
@@ -425,7 +429,7 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 			dma-names = "tx", "rx";
 		};
 
@@ -436,7 +440,7 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
                         status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 			dma-names = "tx", "rx";
 		};
 
@@ -447,7 +451,7 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 			dma-names = "tx", "rx";
 		};
 
@@ -458,7 +462,7 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 			dma-names = "tx", "rx";
 		};
 
@@ -867,7 +871,7 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
@@ -879,7 +883,7 @@
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -890,7 +894,7 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -901,7 +905,7 @@
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -1046,14 +1050,14 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 			status = "disabled";
@@ -1067,10 +1071,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -1083,7 +1087,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1096,7 +1100,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1296,7 +1300,12 @@
 			usb1: usb@48890000 {
 				compatible = "snps,dwc3";
 				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				tx-fifo-resize;
@@ -1319,7 +1328,12 @@
 			usb2: usb@488d0000 {
 				compatible = "snps,dwc3";
 				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
 				tx-fifo-resize;
@@ -1344,7 +1358,12 @@
 			usb3: usb@48910000 {
 				compatible = "snps,dwc3";
 				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";