diff options
| author | Stephen Warren <swarren@wwwdotorg.org> | 2012-09-28 07:54:21 +0400 |
|---|---|---|
| committer | Stephen Warren <swarren@wwwdotorg.org> | 2012-10-26 06:42:51 +0400 |
| commit | 805504abdc73cfc745a5fee3d616cdb24bb2a68c (patch) | |
| tree | b531ce1bcc94b540d783b8153f90567dd3c735cc /arch/arm/boot/dts/bcm2835.dtsi | |
| parent | d0f1c7ffaa32bdda2d413d2db41c51bbdd105834 (diff) | |
| download | linux-805504abdc73cfc745a5fee3d616cdb24bb2a68c.tar.xz | |
ARM: bcm2835: enable GPIO/pinctrl
Enable GPIO and pinctrl in Kconfig.
Add required <mach/gpio.h> for gpiolib.
Instantiate the BCM2835 GPIO module in bcm2835.dtsi.
Add a pinctrl definition to bcm2835-rpi-b.dts that sets up all of the
board's required pinmux configuration. GPIO aren't specified; that's
left to gpio_request().
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/bcm2835.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/bcm2835.dtsi | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 5c5cbafed191..8917550fd1bb 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -40,5 +40,28 @@ interrupts = <2 25>; clock-frequency = <3000000>; }; + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; |