ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek

This is the addition of a new Evaluation Kit the SAMA5D27-WLSOM1-EK.
It's based on the Microchip WireLess SoM which contains the
SAMA5D27 LPDDR2 2Gbits SiP.

[nicolas.ferre@microchip.com]: initial implementation
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: ported to new kernel version,
[eugen.hristev@microchip.com]: addition of peripherals (adc, pmic, qspi, uart)
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/1573543139-8533-4-git-send-email-eugen.hristev@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

1 files changed, 270 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000000..0b9fa2942dff
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(12))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: spi_flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+