ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 182 deletions

diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
deleted file mode 100644
index 4c4092790a20..000000000000
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
-
-	};
-};
-&pciec {
-	status = "okay";
-};
-
-/*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
-&pcie0 {
-	/* Port 0, Lane 0 */
-	status = "okay";
-};
-
-&pcie1 {
-	/* Port 1, Lane 0 */
-	status = "okay";
-};
-
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-
-	/*
-	 * SPI conflicts with NAND, so we disable it here, and
-	 * select NAND as the enabled device by default.
-	 */
-
-	status = "disabled";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&pinctrl {
-	sdio_st_pins: sdio-st-pins {
-		marvell,pins = "mpp44", "mpp45";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&nand_controller {
-	status = "okay";
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&ethernet {
-	status = "okay";
-};
-
-
-&eth0 {
-	status = "okay";
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-};
-
-&eth1 {
-	status = "okay";
-	phy = <&phy3>;
-	phy-mode = "gmii";
-};