Merge tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:

- A series of omap assembly code fixes to fix issues with rodata with
  ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
  which is bad. The fix in most cases is to load the value from data
  section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
  DEBUG_RODATA gets selected by default. And while testing things,
  I also added few more loadable driver modules to the defconfig that
  I seem to need quite often.

- Fix a long standing omap5 RTC mystery and enable RTC where we need
  to ensure the SoC msecure pin is high so we can write to the RTC
  registers.

- Fix irq types for am437x

- A series of minor dts fixes for sbc-am57x and cl-som-am57x

- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
  i2c rate entry

This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:

- Remove legacy mailbox platform data that is no longer needed

- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
  people can use it

- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver

- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
  initramfs quite a bit smaller

* tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: Fix wl12xx missing clocks that cause hangs
  ARM: OMAP: Add PWM dmtimer platform data quirks
  ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
  ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
  ARM: OMAP2+: Fix l2_inv_api_params for rodata
  ARM: OMAP2+: Fix save_secure_ram_context for rodata
  ARM: OMAP2+: Fix l2dis_3630 for rodata
  ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
  ARM: OMAP2+: Remove legacy mailbox device instantiation
  ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 6 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index c53882643ae9..8d93882dc8d5 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -167,7 +167,7 @@
 			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
 			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
 			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
 		>;
 	};
 
@@ -492,14 +492,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_pins>;
 
-	spi-max-frequency = <20000000>;
+	spi-max-frequency = <48000000>;
 
 	spi_flash: spi_flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
 		reg = <0>;				/* CS0 */
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <48000000>;
 
 		partition@0 {
 			label = "uboot";
@@ -559,13 +559,13 @@
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
@@ -588,7 +588,7 @@
 };
 
 &usb2 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &mcasp3 {