ARM: add UEFI stub support

This patch adds EFI stub support for the ARM Linux kernel.

The EFI stub operates similarly to the x86 and arm64 stubs: it is a
shim between the EFI firmware and the normal zImage entry point, and
sets up the environment that the zImage is expecting. This includes
optionally loading the initrd and device tree from the system partition
based on the kernel command line.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

1 files changed, 52 insertions, 2 deletions

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..af11c2f8f3b7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -126,7 +128,7 @@
 start:
 		.type	start,#function
 		.rept	7
-		mov	r0, r0
+		__nop
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
@@ -139,7 +141,8 @@ start:
 		.word	0x04030201	@ endianness flag
 
  THUMB(		.thumb			)
-1:
+1:		__EFI_HEADER
+
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -1353,6 +1356,53 @@ __enter_kernel:
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+		.align	2
+_start:		.long	start - .
+
+ENTRY(efi_stub_entry)
+		@ allocate space on stack for passing current zImage address
+		@ and for the EFI stub to return of new entry point of
+		@ zImage, as EFI stub may copy the kernel. Pointer address
+		@ is passed in r2. r0 and r1 are passed through from the
+		@ EFI firmware to efi_entry
+		adr	ip, _start
+		ldr	r3, [ip]
+		add	r3, r3, ip
+		stmfd	sp!, {r3, lr}
+		mov	r2, sp			@ pass zImage address in r2
+		bl	efi_entry
+
+		@ Check for error return from EFI stub. r0 has FDT address
+		@ or error code.
+		cmn	r0, #1
+		beq	efi_load_fail
+
+		@ Preserve return value of efi_entry() in r4
+		mov	r4, r0
+		bl	cache_clean_flush
+		bl	cache_off
+
+		@ Set parameters for booting zImage according to boot protocol
+		@ put FDT address in r2, it was returned by efi_entry()
+		@ r1 is the machine type, and r0 needs to be 0
+		mov	r0, #0
+		mov	r1, #0xFFFFFFFF
+		mov	r2, r4
+
+		@ Branch to (possibly) relocated zImage that is in [sp]
+		ldr	lr, [sp]
+		ldr	ip, =start_offset
+		add	lr, lr, ip
+		mov	pc, lr				@ no mode switch
+
+efi_load_fail:
+		@ Return EFI_LOAD_ERROR to EFI firmware on error.
+		ldr	r0, =0x80000001
+		ldmfd	sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096