diff options
author | Kishon Vijay Abraham I <kishon@ti.com> | 2013-03-07 17:21:46 +0400 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2013-03-18 13:18:23 +0400 |
commit | eee44da0453cfe9125f4297e4244fe1d6fb1c653 (patch) | |
tree | 21fc6bec83742c5756bf246e5d70baf76775a79d /Documentation | |
parent | c3ec830d8925d904f8826d52227d7dfb5dee922c (diff) | |
download | linux-eee44da0453cfe9125f4297e4244fe1d6fb1c653.tar.xz |
usb: musb: omap2430: replace *_* with *-* in property names
No functional change. Replace *_* with *-* in property names of otg to
follow the general convention.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/usb/omap-usb.txt | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1b9f55fd96c0..662f0f1d2315 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -8,10 +8,10 @@ OMAP MUSB GLUE and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - - num_eps : Specifies the number of endpoints. This is also a + - num-eps : Specifies the number of endpoints. This is also a MUSB configuration-specific setting. Should be set to "16" - - ram_bits : Specifies the ram address size. Should be set to "12" - - interface_type : This is a board specific setting to describe the type of + - ram-bits : Specifies the ram address size. Should be set to "12" + - interface-type : This is a board specific setting to describe the type of interface between the controller and the phy. It should be "0" or "1" specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" @@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { ti,hwmods = "usb_otg_hs"; ti,has-mailbox; multipoint = <1>; - num_eps = <16>; - ram_bits = <12>; + num-eps = <16>; + ram-bits = <12>; ctrl-module = <&omap_control_usb>; }; Board specific device node entry &usb_otg_hs { - interface_type = <1>; + interface-type = <1>; mode = <3>; power = <50>; }; |