Merge tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and PHY driver update for 4.16-rc1.

  Along with the normally expected XHCI, MUSB, and Gadget driver
  patches, there are some PHY driver fixes, license cleanups, sysfs
  attribute cleanups, usbip changes, and a raft of other smaller fixes
  and additions.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a long time with no
  reported issues"

* tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (137 commits)
  USB: serial: pl2303: new device id for Chilitag
  USB: misc: fix up some remaining DEVICE_ATTR() usages
  USB: musb: fix up one odd DEVICE_ATTR() usage
  USB: atm: fix up some remaining DEVICE_ATTR() usage
  USB: move many drivers to use DEVICE_ATTR_WO
  USB: move many drivers to use DEVICE_ATTR_RO
  USB: move many drivers to use DEVICE_ATTR_RW
  USB: misc: chaoskey: Use true and false for boolean values
  USB: storage: remove old wording about how to submit a change
  USB: storage: remove invalid URL from drivers
  usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found
  usbip: list: don't list devices attached to vhci_hcd
  usbip: prevent bind loops on devices attached to vhci_hcd
  USB: serial: remove redundant initializations of 'mos_parport'
  usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()
  usb: gadget: compress return logic into one line
  usbip: vhci_hcd: update 'status' file header and format
  USB: serial: simple: add Motorola Tetra driver
  CDC-ACM: apply quirk for card reader
  usb: option: Add support for FS040U modem
  ...

8 files changed, 121 insertions, 15 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
new file mode 100644
index 000000000000..0088aba4caa8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
@@ -0,0 +1,25 @@
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc
+Date:		June 2017
+Contact:	Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+		xHCI compatible USB host controllers (i.e. super-speed
+		USB3 controllers) are often implemented with the Debug
+		Capability (DbC). It can present a debug device which
+		is fully compliant with the USB framework and provides
+		the equivalent of a very high performance full-duplex
+		serial link for debug purpose.
+
+		The DbC debug device shares a root port with xHCI host.
+		When the DbC is enabled, the root port will be assigned
+		to the Debug Capability. Otherwise, it will be assigned
+		to xHCI.
+
+		Writing "enable" to this attribute will enable the DbC
+		functionality and the shared root port will be assigned
+		to the DbC device. Writing "disable" to this attribute
+		will disable the DbC functionality and the shared root
+		port will roll back to the xHCI.
+
+		Reading this attribute gives the state of the DbC. It
+		can be one of the following states: disabled, enabled,
+		initialized, connected, configured and stalled.
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 52fb41046b34..44e8bab159ad 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -47,6 +47,8 @@ Optional properties:
 			from P0 to P1/P2/P3 without delay.
  - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
 			during HS transmit.
+ - snps,dis_metastability_quirk: when set, disable metastability workaround.
+			CAUTION: use only if you are absolutely sure of it.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 30595964876a..88d9f4a4b280 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -35,10 +35,14 @@ Required properties:
  - phys : a list of phandle + phy specifier pairs
 
 Optional properties:
- - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
-	mode;
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
-	control register, it depends on "mediatek,wakeup-src".
+ - wakeup-source : enable USB remote wakeup;
+ - mediatek,syscon-wakeup : phandle to syscon used to access the register
+	of the USB wakeup glue layer between xHCI and SPM; it depends on
+	"wakeup-source", and has two arguments:
+	- the first one : register base address of the glue layer in syscon;
+	- the second one : hardware version of the glue layer
+		- 1 : used by mt8173 etc
+		- 2 : used by mt2712 etc
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;
  - vbus-supply : reference to the VBUS regulator;
@@ -46,6 +50,7 @@ Optional properties:
  - pinctrl-names : a pinctrl state named "default" must be defined
  - pinctrl-0 : pin control group
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+ - imod-interval-ns: default interrupt moderation interval is 5000ns
 
 Example:
 usb30: usb@11270000 {
@@ -64,8 +69,9 @@ usb30: usb@11270000 {
 	vusb33-supply = <&mt6397_vusb_reg>;
 	vbus-supply = <&usb_p1_vbus>;
 	usb3-lpm-capable;
-	mediatek,syscon-wakeup = <&pericfg>;
-	mediatek,wakeup-src = <1>;
+	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+	wakeup-source;
+	imod-interval-ns = <10000>;
 };
 
 2nd: dual-role mode with xHCI driver
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index b2271d8e6b50..d589a1ef96a1 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -42,9 +42,14 @@ Optional properties:
  - enable-manual-drd : supports manual dual-role switch via debugfs; usually
 	used when receptacle is TYPE-A and also wants to support dual-role
 	mode.
- - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
-	control register, it depends on "mediatek,enable-wakeup".
+ - wakeup-source: enable USB remote wakeup of host mode.
+ - mediatek,syscon-wakeup : phandle to syscon used to access the register
+	of the USB wakeup glue layer between SSUSB and SPM; it depends on
+	"wakeup-source", and has two arguments:
+	- the first one : register base address of the glue layer in syscon;
+	- the second one : hardware version of the glue layer
+		- 1 : used by mt8173 etc
+		- 2 : used by mt2712 etc
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;
 
@@ -71,8 +76,8 @@ ssusb: usb@11271000 {
 	vbus-supply = <&usb_p0_vbus>;
 	extcon = <&extcon_usb>;
 	dr_mode = "otg";
-	mediatek,enable-wakeup;
-	mediatek,syscon-wakeup = <&pericfg>;
+	wakeup-source;
+	mediatek,syscon-wakeup = <&pericfg 0x400 1>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 	ranges;
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 47394ab788e3..d060172f1529 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -13,8 +13,10 @@ Required properties:
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
 	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
 	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
+	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
 	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+	- "renesas,rza1-usbhs" for RZ/A1 compatible device
 
 	When compatible with the generic version, nodes must list the
 	SoC-specific version corresponding to the platform first followed
diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 1b27cebb47f4..036be172b1ae 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -4,8 +4,49 @@ Usually, we only use device tree for hard wired USB device.
 The reference binding doc is from:
 http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
 
+Four types of device-tree nodes are defined: "host-controller nodes"
+representing USB host controllers, "device nodes" representing USB devices,
+"interface nodes" representing USB interfaces and "combined nodes"
+representing simple USB devices.
 
-Required properties:
+A combined node shall be used instead of a device node and an interface node
+for devices of class 0 or 9 (hub) with a single configuration and a single
+interface.
+
+A "hub node" is a combined node or an interface node that represents a USB
+hub.
+
+
+Required properties for device nodes:
+- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
+  The textual representation of VID and PID shall be in lower case hexadecimal
+  with leading zeroes suppressed. The other compatible strings from the above
+  standard binding could also be used, but a device adhering to this binding
+  may leave out all except for "usbVID,PID".
+- reg: the number of the USB hub port or the USB host-controller port to which
+  this device is attached. The range is 1-255.
+
+
+Required properties for device nodes with interface nodes:
+- #address-cells: shall be 2
+- #size-cells: shall be 0
+
+
+Required properties for interface nodes:
+- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+  the product id, CN is the configuration value and IN is the interface
+  number. The textual representation of VID, PID, CN and IN shall be in lower
+  case hexadecimal with leading zeroes suppressed. The other compatible
+  strings from the above standard binding could also be used, but a device
+  adhering to this binding may leave out all except for
+  "usbifVID,PID.configCN.IN".
+- reg: the interface number and configuration value
+
+The configuration component is not included in the textual representation of
+an interface-node unit address for configuration 1.
+
+
+Required properties for combined nodes:
 - compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
   The textual representation of VID and PID shall be in lower case hexadecimal
   with leading zeroes suppressed. The other compatible strings from the above
@@ -31,8 +72,31 @@ Example:
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	hub@1 {	/* hub connected to port 1 */
+	hub@1 {		/* hub connected to port 1 */
 		compatible = "usb5e3,608";
 		reg = <1>;
 	};
+
+	device@2 {	/* device connected to port 2 */
+		compatible = "usb123,4567";
+		reg = <2>;
+	};
+
+	device@3 { 	/* device connected to port 3 */
+		compatible = "usb123,abcd";
+		reg = <3>;
+
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interface@0 {	/* interface 0 of configuration 1 */
+			compatible = "usbif123,abcd.config1.0";
+			reg = <0 1>;
+		};
+
+		interface@0,2 {	/* interface 0 of configuration 2 */
+			compatible = "usbif123,abcd.config2.0";
+			reg = <0 2>;
+		};
+	};
 };
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index ae6e484a8d7c..e2ea59bbca93 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -7,12 +7,14 @@ Required properties:
     - "marvell,armada3700-xhci" for Armada 37xx SoCs
     - "marvell,armada-375-xhci" for Armada 375 SoCs
     - "marvell,armada-380-xhci" for Armada 38x SoCs
+    - "renesas,xhci-r8a7743" for r8a7743 SoC
     - "renesas,xhci-r8a7790" for r8a7790 SoC
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
     - "renesas,xhci-r8a7796" for r8a7796 SoC
-    - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device
+    - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
+      device
     - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
     - "xhci-platform" (deprecated)
 
@@ -29,6 +31,7 @@ Optional properties:
   - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
+  - imod-interval-ns: default interrupt moderation interval is 5000ns
 
 Example:
 	usb@f0931000 {
diff --git a/Documentation/usb/usbip_protocol.txt b/Documentation/usb/usbip_protocol.txt
index 16b6fe27284c..c7a0f4c7e7f1 100644
--- a/Documentation/usb/usbip_protocol.txt
+++ b/Documentation/usb/usbip_protocol.txt
@@ -274,7 +274,6 @@ USBIP_CMD_SUBMIT: Submit an URB
   URB_SHORT_NOT_OK        | 0x00000001 | only in | only in   | only in  | no
   URB_ISO_ASAP            | 0x00000002 | no      | no        | no       | yes
   URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes     | yes       | yes      | yes
-  URB_NO_FSBR             | 0x00000020 | yes     | no        | no       | no
   URB_ZERO_PACKET         | 0x00000040 | no      | no        | only out | no
   URB_NO_INTERRUPT        | 0x00000080 | yes     | yes       | yes      | yes
   URB_FREE_BUFFER         | 0x00000100 | yes     | yes       | yes      | yes