Merge 6.8-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

15 files changed, 97 insertions, 65 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- a/Documentation/ABI/testing/sysfs-class-net-queues
+++ b/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 8d7d8f05f6cd..92fe7c5c5ac1 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -1,4 +1,4 @@
-What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -6,7 +6,7 @@ Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -20,7 +20,7 @@ Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -28,7 +28,7 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -37,7 +37,7 @@ Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -50,7 +50,7 @@ Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
@@ -63,7 +63,7 @@ Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 
 		Only supported for particular Intel i915 graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+What:		/sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input
 Date:		February 2023
 KernelVersion:	6.2
 Contact:	intel-gfx@lists.freedesktop.org
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
index 8c321bc9dc04..023fd82de3f7 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -1,4 +1,4 @@
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -12,7 +12,7 @@ Description:	RW. Card reactive sustained  (PL1) power limit in microwatts.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -20,7 +20,7 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -33,7 +33,7 @@ Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -44,7 +44,7 @@ Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 		the operating frequency if the power averaged over a window
 		exceeds this limit.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -52,7 +52,7 @@ Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
@@ -60,7 +60,7 @@ Description:	RO. Energy input of device in microjoules.
 
 		Only supported for particular Intel xe graphics platforms.
 
-What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
 Date:		October 2023
 KernelVersion:	6.6
 Contact:	intel-xe@lists.freedesktop.org
diff --git a/Documentation/ABI/testing/sysfs-platform-silicom b/Documentation/ABI/testing/sysfs-platform-silicom
index 2288b3665d16..4d1cc5bdbcc5 100644
--- a/Documentation/ABI/testing/sysfs-platform-silicom
+++ b/Documentation/ABI/testing/sysfs-platform-silicom
@@ -10,6 +10,7 @@ What:		/sys/devices/platform/silicom-platform/power_cycle
 Date:		November 2023
 KernelVersion:	6.7
 Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
 		This file allow user to power cycle the platform.
 		Default value is 0; when set to 1, it powers down
 		the platform, waits 5 seconds, then powers on the
diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst
index 89984dfececf..ae3030136637 100644
--- a/Documentation/accel/introduction.rst
+++ b/Documentation/accel/introduction.rst
@@ -101,8 +101,8 @@ External References
 email threads
 -------------
 
-* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
-* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
 
 Conference talks
 ----------------
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index 102937bc8443..4410384596a9 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
 
 .. include:: kernel-parameters.txt
    :literal:
-
-Todo
-----
-
-	Add more DRM drivers.
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 993c2a05f5ee..b6aeae3327ce 100644
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
 3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 
-	a.	Build your kernel with CONFIG_SLUB=y rather than
-		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
-		use of each CPU's workqueues to run its cache_reap()
-		function.
-	b.	Avoid using oprofile, thus avoiding OS jitter from
+	a.	Avoid using oprofile, thus avoiding OS jitter from
 		wq_sync_buffer().
-	c.	Limit your CPU frequency so that a CPU-frequency
+	b.	Limit your CPU frequency so that a CPU-frequency
 		governor is not required, possibly enlisting the aid of
 		special heatsinks or other cooling technologies.  If done
 		correctly, and if you CPU architecture permits, you should
@@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
 
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	d.	As of v3.18, Christoph Lameter's on-demand vmstat workers
+	c.	As of v3.18, Christoph Lameter's on-demand vmstat workers
 		commit prevents OS jitter due to vmstat_update() on
 		CONFIG_SMP=y systems.  Before v3.18, is not possible
 		to entirely get rid of the OS jitter, but you can
@@ -274,7 +270,7 @@ To reduce its OS jitter, do any of the following:
 		(based on an earlier one from Gilad Ben-Yossef) that
 		reduces or even eliminates vmstat overhead for some
 		workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
-	e.	If running on high-end powerpc servers, build with
+	d.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
 		(This will require editing Kconfig files and will defeat
@@ -282,12 +278,12 @@ To reduce its OS jitter, do any of the following:
 		due to the rtas_event_scan() function.
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	f.	If running on Cell Processor, build your kernel with
+	e.	If running on Cell Processor, build your kernel with
 		CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
 		spu_gov_work().
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	g.	If running on PowerMAC, build your kernel with
+	f.	If running on PowerMAC, build your kernel with
 		CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
 		avoiding OS jitter from rackmeter_do_timer().
 
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index a9efab50eed8..22955d56b379 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -671,8 +671,23 @@ Testing Static Functions
 ------------------------
 
 If we do not want to expose functions or variables for testing, one option is to
-conditionally ``#include`` the test file at the end of your .c file. For
-example:
+conditionally export the used symbol. For example:
+
+.. code-block:: c
+
+	/* In my_file.c */
+
+	VISIBLE_IF_KUNIT int do_interesting_thing();
+	EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
+
+	/* In my_file.h */
+
+	#if IS_ENABLED(CONFIG_KUNIT)
+		int do_interesting_thing(void);
+	#endif
+
+Alternatively, you could conditionally ``#include`` the test file at the end of
+your .c file. For example:
 
 .. code-block:: c
 
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
index 25d53fde92e1..597c9cc6a312 100644
--- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -85,7 +85,7 @@ allOf:
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@ allOf:
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@ allOf:
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
index 6d5569e77b7a..6a11c1d11fb5 100644
--- a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
+++ b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - ti,k3-j721s2-wave521c
+          - ti,j721s2-wave521c
       - const: cnm,wave521c
 
   reg:
@@ -53,7 +53,7 @@ additionalProperties: false
 examples:
   - |
     vpu: video-codec@12345678 {
-        compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c";
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
         reg = <0x12345678 0x1000>;
         clocks = <&clks 42>;
         interrupts = <42>;
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 8108c564dd78..aa32dc950e72 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -22,6 +22,7 @@ properties:
       - const: allwinner,sun6i-a31-spdif
       - const: allwinner,sun8i-h3-spdif
       - const: allwinner,sun50i-h6-spdif
+      - const: allwinner,sun50i-h616-spdif
       - items:
           - const: allwinner,sun8i-a83t-spdif
           - const: allwinner,sun8i-h3-spdif
@@ -62,6 +63,8 @@ allOf:
             enum:
               - allwinner,sun6i-a31-spdif
               - allwinner,sun8i-h3-spdif
+              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       required:
@@ -73,7 +76,7 @@ allOf:
           contains:
             enum:
               - allwinner,sun8i-h3-spdif
-              - allwinner,sun50i-h6-spdif
+              - allwinner,sun50i-h616-spdif
 
     then:
       properties:
diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst
index 1c244866041a..165514401441 100644
--- a/Documentation/filesystems/overlayfs.rst
+++ b/Documentation/filesystems/overlayfs.rst
@@ -145,7 +145,9 @@ filesystem, an overlay filesystem needs to record in the upper filesystem
 that files have been removed.  This is done using whiteouts and opaque
 directories (non-directories are always opaque).
 
-A whiteout is created as a character device with 0/0 device number.
+A whiteout is created as a character device with 0/0 device number or
+as a zero-size regular file with the xattr "trusted.overlay.whiteout".
+
 When a whiteout is found in the upper level of a merged directory, any
 matching name in the lower level is ignored, and the whiteout itself
 is also hidden.
@@ -154,6 +156,13 @@ A directory is made opaque by setting the xattr "trusted.overlay.opaque"
 to "y".  Where the upper filesystem contains an opaque directory, any
 directory in the lower filesystem with the same name is ignored.
 
+An opaque directory should not conntain any whiteouts, because they do not
+serve any purpose.  A merge directory containing regular files with the xattr
+"trusted.overlay.whiteout", should be additionally marked by setting the xattr
+"trusted.overlay.opaque" to "x" on the merge directory itself.
+This is needed to avoid the overhead of checking the "trusted.overlay.whiteout"
+on all entries during readdir in the common case.
+
 readdir
 -------
 
@@ -534,8 +543,9 @@ A lower dir with a regular whiteout will always be handled by the overlayfs
 mount, so to support storing an effective whiteout file in an overlayfs mount an
 alternative form of whiteout is supported. This form is a regular, zero-size
 file with the "overlay.whiteout" xattr set, inside a directory with the
-"overlay.whiteouts" xattr set. Such whiteouts are never created by overlayfs,
-but can be used by userspace tools (like containers) that generate lower layers.
+"overlay.opaque" xattr set to "x" (see `whiteouts and opaque directories`_).
+These alternative whiteouts are never created by overlayfs, but can be used by
+userspace tools (like containers) that generate lower layers.
 These alternative whiteouts can be escaped using the standard xattr escape
 mechanism in order to properly nest to any depth.
 
diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml
index 1ad01d52a863..8e4d19adee8c 100644
--- a/Documentation/netlink/specs/rt_link.yaml
+++ b/Documentation/netlink/specs/rt_link.yaml
@@ -942,6 +942,10 @@ attribute-sets:
       -
         name: gro-ipv4-max-size
         type: u32
+      -
+        name: dpll-pin
+        type: nest
+        nested-attributes: link-dpll-pin-attrs
   -
     name: af-spec-attrs
     attributes:
@@ -1627,6 +1631,12 @@ attribute-sets:
       -
         name: used
         type: u8
+  -
+    name: link-dpll-pin-attrs
+    attributes:
+      -
+        name: id
+        type: u32
 
 sub-messages:
   -
diff --git a/Documentation/sphinx/templates/kernel-toc.html b/Documentation/sphinx/templates/kernel-toc.html
index b58efa99df52..41f1efbe64bb 100644
--- a/Documentation/sphinx/templates/kernel-toc.html
+++ b/Documentation/sphinx/templates/kernel-toc.html
@@ -12,5 +12,7 @@
 <script type="text/javascript"> <!--
   var sbar = document.getElementsByClassName("sphinxsidebar")[0];
   let currents = document.getElementsByClassName("current")
-  sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  if (currents.length) {
+    sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  }
   --> </script>
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
index 4ec6b775ebba..b086c7ab72f0 100644
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -456,17 +456,17 @@ Function-specific configfs interface
 The function name to use when creating the function directory is "ncm".
 The NCM function provides these attributes in its function directory:
 
-	===============   ==================================================
-	ifname		  network device interface name associated with this
-			  function instance
-	qmult		  queue length multiplier for high and super speed
-	host_addr	  MAC address of host's end of this
-			  Ethernet over USB link
-	dev_addr	  MAC address of device's end of this
-			  Ethernet over USB link
-	max_segment_size  Segment size required for P2P connections. This
-			  will set MTU to (max_segment_size - 14 bytes)
-	===============   ==================================================
+	======================= ==================================================
+	ifname			network device interface name associated with this
+				function instance
+	qmult			queue length multiplier for high and super speed
+	host_addr		MAC address of host's end of this
+				Ethernet over USB link
+	dev_addr		MAC address of device's end of this
+				Ethernet over USB link
+	max_segment_size	Segment size required for P2P connections. This
+				will set MTU to 14 bytes
+	======================= ==================================================
 
 and after creating the functions/ncm.<instance name> they contain default
 values: qmult is 5, dev_addr and host_addr are randomly selected.