Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (430 commits)
  ALSA: hda - Add quirk for Acer Ferrari 5000
  ALSA: hda - Use cached calls to get widget caps and pin caps
  ALSA: hda - Don't create empty/single-item input source
  ALSA: hda - Fix the wrong pin-cap check in patch_realtek.c
  ALSA: hda - Cache pin-cap values
  ALSA: hda - Avoid output amp manipulation to digital mic pins
  ALSA: hda - Add function id to proc output
  ALSA: pcm - Safer boundary checks
  ALSA: hda - Detect digital-mic inputs on ALC663 / ALC272
  ALSA: sound/ali5451: typo: s/resouces/resources/
  ALSA: hda - Don't show the current connection for power widgets
  ALSA: Fix wrong pointer to dev_err() in arm/pxa2xx-ac97-lib.c
  ASoC: Declare Headset as Mic and Headphone widgets for SDP3430
  ASoC: OMAP: N810: Add more jack functions
  ASoC: OMAP: N810: Mark not connected input pins
  ASoC: Add FLL support for WM8400
  ALSA: hda - Don't reset stream at each prepare callback
  ALSA: hda - Don't reset BDL unnecessarily
  ALSA: pcm - Fix delta calculation at boundary overlap
  ALSA: pcm - Reset invalid position even without debug option
  ...

9 files changed, 171 insertions, 84 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 1462ed86d40a..a3a83d38f96f 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/DocBook/alsa-driver-api.tmpl
index 9d644f7e241e..0230a96f0564 100644
--- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
+++ b/Documentation/DocBook/alsa-driver-api.tmpl
@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,6 +35,8 @@
 
   </bookinfo>
 
+<toc></toc>
+
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -71,6 +73,10 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -89,6 +95,9 @@
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
      </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
+     </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c
      </sect1>
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 87a7c07ab658..46b08fef3744 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="Writing-an-ALSA-Driver">
   <bookinfo>
     <title>Writing an ALSA Driver</title>
     <author>
@@ -492,9 +492,9 @@
           }
 
           /* (2) */
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
-          if (card == NULL)
-                  return -ENOMEM;
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+          if (err < 0)
+                  return err;
 
           /* (3) */
           err = snd_mychip_create(card, pci, &chip);
@@ -590,8 +590,9 @@
             <programlisting>
 <![CDATA[
   struct snd_card *card;
+  int err;
   ....
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -809,26 +810,28 @@
 
       <para>
         As mentioned above, to create a card instance, call
-      <function>snd_card_new()</function>.
+      <function>snd_card_create()</function>.
 
         <informalexample>
           <programlisting>
 <![CDATA[
   struct snd_card *card;
-  card = snd_card_new(index, id, module, extra_size);
+  int err;
+  err = snd_card_create(index, id, module, extra_size, &card);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The function takes four arguments, the card-index number, the
+        The function takes five arguments, the card-index number, the
         id string, the module pointer (usually
         <constant>THIS_MODULE</constant>),
-        and the size of extra-data space.  The last argument is used to
+        the size of extra-data space, and the pointer to return the
+        card instance.  The extra_size argument is used to
         allocate card-&gt;private_data for the
         chip-specific data.  Note that these data
-        are allocated by <function>snd_card_new()</function>.
+        are allocated by <function>snd_card_create()</function>.
       </para>
     </section>
 
@@ -915,15 +918,16 @@
       </para>
 
       <section id="card-management-chip-specific-snd-card-new">
-        <title>1. Allocating via <function>snd_card_new()</function>.</title>
+        <title>1. Allocating via <function>snd_card_create()</function>.</title>
         <para>
           As mentioned above, you can pass the extra-data-length
-	  to the 4th argument of <function>snd_card_new()</function>, i.e.
+	  to the 4th argument of <function>snd_card_create()</function>, i.e.
 
           <informalexample>
             <programlisting>
 <![CDATA[
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                        sizeof(struct mychip), &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -952,8 +956,8 @@
 
         <para>
           After allocating a card instance via
-          <function>snd_card_new()</function> (with
-          <constant>NULL</constant> on the 4th arg), call
+          <function>snd_card_create()</function> (with
+          <constant>0</constant> on the 4th arg), call
           <function>kzalloc()</function>. 
 
           <informalexample>
@@ -961,7 +965,7 @@
 <![CDATA[
   struct snd_card *card;
   struct mychip *chip;
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 ]]>
@@ -5750,8 +5754,9 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
           ....
           chip = kzalloc(sizeof(*chip), GFP_KERNEL);
           ....
@@ -5763,7 +5768,7 @@ struct _snd_pcm_runtime {
       </informalexample>
 
 	When you created the chip data with
-	<function>snd_card_new()</function>, it's anyway accessible
+	<function>snd_card_create()</function>, it's anyway accessible
 	via <structfield>private_data</structfield> field.
 
       <informalexample>
@@ -5775,9 +5780,10 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
-                              sizeof(struct mychip));
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                                sizeof(struct mychip), &card);
           ....
           chip = card->private_data;
           ....
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 841a9365d5fd..012858d2b119 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq	- IRQ # for CMI8330 chip (SB16)
     sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
     sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
+    fmport	- (optional) OPL3 I/O port
+    mpuport	- (optional) MPU401 I/O port
+    mpuirq	- (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -388,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port	- port # for CS4232 chip (PnP setup - 0x534)
-    cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port	- FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq		- IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
-    dma1	- first DMA # for CS4232 chip (0,1,3)
-    dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -437,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------
 
@@ -606,6 +589,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    fm_port	- port # for OPL3 (option; share the same port as default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
@@ -757,6 +741,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+    		  When the bit 8 (0x100) is set, the lower 8 bits are used
+		  as the "fixed" codec slots; i.e. the driver probes the
+		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
@@ -1185,6 +1172,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices and PnP.
     
+  Module snd-msnd-classic
+  -----------------------
+
+    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
+    soundcards.
+
+    io		- Port # for msnd-classic card
+    irq		- IRQ # for msnd-classic card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+    digital	- Digital daughterboard present (default = 0)
+    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
+    reset	- Reset all devices
+    mpu_io	- MPU401 I/O port
+    mpu_irq	- MPU401 irq#
+    ide_io0	- IDE port #0
+    ide_io1	- IDE port #1
+    ide_irq	- IDE irq#
+    joystick_io	- Joystick I/O port
+
+    The driver requires firmware files "turtlebeach/msndinit.bin" and
+    "turtlebeach/msndperm.bin" in the proper firmware directory.
+
+    See Documentation/sound/oss/MultiSound for important information
+    about this driver.  Note that it has been discontinued, but the 
+    Voyetra Turtle Beach knowledge base entry for it is still available
+    at
+	http://www.turtlebeach.com/site/kb_ftp/790.asp
+
+  Module snd-msnd-pinnacle
+  ------------------------
+
+    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
+
+    io		- Port # for pinnacle/fiji card
+    irq		- IRQ # for pinnalce/fiji card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    The driver requires firmware files "turtlebeach/pndspini.bin" and
+    "turtlebeach/pndsperm.bin" in the proper firmware directory.
+
   Module snd-mtpav
   ----------------
 
@@ -1824,7 +1859,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
 
     This module supports autoprobe and multiple cards.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0f5d26bea80f..8eec05bc079e 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -56,6 +56,7 @@ ALC262
   sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
+  tyan		Tyan Thunder n6650W (S2915-E)
   ultra		Samsung Q1 Ultra Vista model
   lenovo-3000	Lenovo 3000 y410
   nec		NEC Versa S9100
@@ -261,6 +262,8 @@ Conexant 5051
 =============
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
+  hp-dv6736	HP dv6736
+  lenovo-x200	Lenovo X200 laptop
 
 STAC9200
 ========
@@ -278,6 +281,7 @@ STAC9200
   gateway-m4	Gateway laptops with EAPD control
   gateway-m4-2	Gateway laptops with EAPD control
   panasonic	Panasonic CF-74
+  auto		BIOS setup (default)
 
 STAC9205/9254
 =============
@@ -285,6 +289,8 @@ STAC9205/9254
   dell-m42	Dell (unknown)
   dell-m43	Dell Precision
   dell-m44	Dell Inspiron
+  eapd		Keep EAPD on (e.g. Gateway T1616)
+  auto		BIOS setup (default)
 
 STAC9220/9221
 =============
@@ -308,6 +314,7 @@ STAC9220/9221
   dell-d82	Dell (unknown)
   dell-m81	Dell (unknown)
   dell-m82	Dell XPS M1210
+  auto		BIOS setup (default)
 
 STAC9202/9250/9251
 ==================
@@ -319,6 +326,7 @@ STAC9202/9250/9251
   m3		Some Gateway MX series laptops
   m5		Some Gateway MX series laptops (MP6954)
   m6		Some Gateway NX series laptops
+  auto		BIOS setup (default)
 
 STAC9227/9228/9229/927x
 =======================
@@ -328,6 +336,7 @@ STAC9227/9228/9229/927x
   5stack	D965 5stack + SPDIF
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  auto		BIOS setup (default)
 
 STAC92HD71B*
 ============
@@ -335,7 +344,10 @@ STAC92HD71B*
   dell-m4-1	Dell desktops
   dell-m4-2	Dell desktops
   dell-m4-3	Dell desktops
-  hp-m4		HP dv laptops
+  hp-m4		HP mini 1000
+  hp-dv5	HP dv series
+  hp-hdx	HP HDX series
+  auto		BIOS setup (default)
 
 STAC92HD73*
 ===========
@@ -345,13 +357,16 @@ STAC92HD73*
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  auto		BIOS setup (default)
 
 STAC92HD83*
 ===========
   ref		Reference board
   mic-ref	Reference board with power managment for ports
+  dell-s14	Dell laptop
+  auto		BIOS setup (default)
 
 STAC9872
 ========
-  vaio		Setup for VAIO FE550G/SZ110
-  vaio-ar Setup for VAIO AR
+  vaio		VAIO laptop without SPDIF
+  auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 8d68fff71839..c5948f2f9a25 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -109,6 +109,13 @@ slot, pass `probe_mask=1`.  For the first and the third slots, pass
 Since 2.6.29 kernel, the driver has a more robust probing method, so
 this error might happen rarely, though.
 
+On a machine with a broken BIOS, sometimes you need to force the
+driver to probe the codec slots the hardware doesn't report for use.
+In such a case, turn the bit 8 (0x100) of `probe_mask` option on.
+Then the rest 8 bits are passed as the codec slots to probe
+unconditionally.  For example, `probe_mask=0x103` will force to probe
+the codec slots 0 and 1 no matter what the hardware reports.
+
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
@@ -358,10 +365,26 @@ modelname::
   to this file.
 init_verbs::
   The extra verbs to execute at initialization.  You can add a verb by
-  writing to this file.  Pass tree numbers, nid, verb and parameter.
+  writing to this file.  Pass three numbers: nid, verb and parameter
+  (separated with a space).
 hints::
-  Shows hint strings for codec parsers for any use.  Right now it's
-  not used.
+  Shows / stores hint strings for codec parsers for any use.
+  Its format is `key = value`.  For example, passing `hp_detect = yes`
+  to IDT/STAC codec parser will result in the disablement of the
+  headphone detection.
+init_pin_configs::
+  Shows the initial pin default config values set by BIOS.
+driver_pin_configs::
+  Shows the pin default values set by the codec parser explicitly.
+  This doesn't show all pin values but only the changed values by
+  the parser.  That is, if the parser doesn't change the pin default
+  config values by itself, this will contain nothing.
+user_pin_configs::
+  Shows the pin default config values to override the BIOS setup.
+  Writing this (with two numbers, NID and value) appends the new
+  value.  The given will be used instead of the initial BIOS value at
+  the next reconfiguration time.  Note that this config will override
+  even the driver pin configs, too.
 reconfig::
   Triggers the codec re-configuration.  When any value is written to
   this file, the driver re-initialize and parses the codec tree
@@ -371,6 +394,14 @@ clear::
   Resets the codec, removes the mixer elements and PCM stuff of the
   specified codec, and clear all init verbs and hints.
 
+For example, when you want to change the pin default configuration
+value of the pin widget 0x14 to 0x9993013f, and let the driver
+re-configure based on that state, run like below:
+------------------------------------------------------------------------
+  # echo 0x14 0x9993013f > /sys/class/sound/hwC0D0/user_pin_configs
+  # echo 1 > /sys/class/sound/hwC0D0/reconfig  
+------------------------------------------------------------------------
+
 
 Power-Saving
 ~~~~~~~~~~~~
@@ -461,6 +492,16 @@ run with `--no-upload` option, and attach the generated file.
 There are some other useful options.  See `--help` option output for
 details.
 
+When a probe error occurs or when the driver obviously assigns a
+mismatched model, it'd be helpful to load the driver with
+`probe_only=1` option (at best after the cold reboot) and run
+alsa-info at this state.  With this option, the driver won't configure
+the mixer and PCM but just tries to probe the codec slot.  After
+probing, the proc file is available, so you can get the raw codec
+information before modified by the driver.  Of course, the driver
+isn't usable with `probe_only=1`.  But you can continue the
+configuration via hwdep sysfs file if hda-reconfig option is enabled.
+
 
 hda-verb
 ~~~~~~~~
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 46f9684d0b29..9e6763264a2e 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------
diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232
deleted file mode 100644
index 7d6af7a5c1c2..000000000000
--- a/Documentation/sound/oss/CS4232
+++ /dev/null
@@ -1,23 +0,0 @@
-To configure the Crystal CS423x sound chip and activate its DSP functions,
-modules may be loaded in this order:
-  
-	modprobe sound
-	insmod ad1848
-	insmod uart401
-	insmod cs4232 io=* irq=* dma=* dma2=*
-  
-This is the meaning of the parameters:
-  
-	io--I/O address of the Windows Sound System (normally 0x534)
-	irq--IRQ of this device
-	dma and dma2--DMA channels (DMA2 may be 0)
-  
-On some cards, the board attempts to do non-PnP setup, and fails.  If you
-have problems, use Linux' PnP facilities. 
-  
-To get MIDI facilities add
-  
-	insmod opl3 io=*
-  
-where "io" is the I/O address of the OPL3 synthesizer. This will be shown
-in /proc/sys/pnp and is normally 0x388.
diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction
index f04ba6bb7395..75d967ff9266 100644
--- a/Documentation/sound/oss/Introduction
+++ b/Documentation/sound/oss/Introduction
@@ -80,7 +80,7 @@ Notes:
     additional features.
 
 2.  The commercial OSS driver may be obtained from the site:
-    http://www/opensound.com.  This may be used for cards that
+    http://www.opensound.com.  This may be used for cards that
     are unsupported by the kernel driver, or may be used
     by other operating systems.