diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-25 22:22:58 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-25 22:22:58 +0300 |
commit | 7e062cda7d90543ac8c7700fc7c5527d0c0f22ad (patch) | |
tree | 2f1602595d9416be41cc2e88a659ba4c145734b9 /Documentation | |
parent | 5d1772b1739b085721431eef0c0400f3aff01abf (diff) | |
parent | 57d7becda9c9e612e6b00676f2eecfac3e719e88 (diff) | |
download | linux-7e062cda7d90543ac8c7700fc7c5527d0c0f22ad.tar.xz |
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Diffstat (limited to 'Documentation')
49 files changed, 2435 insertions, 950 deletions
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index c07dc0ee860e..9764d6edb189 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -1933,7 +1933,7 @@ ... 255= /dev/umem/d15p15 15th partition of 16th board. - 117 char COSA/SRP synchronous serial card + 117 char [REMOVED] COSA/SRP synchronous serial card 0 = /dev/cosa0c0 1st board, 1st channel 1 = /dev/cosa0c1 1st board, 2nd channel ... diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index f86b5e1623c6..fcd650bdbc7e 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -322,6 +322,14 @@ a leaked reference faster. A larger value may be useful to prevent false warnings on slow/loaded systems. Default value is 10, minimum 1, maximum 3600. +skb_defer_max +------------- + +Max size (in skbs) of the per-cpu list of skbs being freed +by the cpu which allocated them. Used by TCP stack so far. + +Default: 64 + optmem_max ---------- @@ -374,6 +382,15 @@ option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt). If set to 1 (default), hash rethink is performed on listening socket. If set to 0, hash rethink is not performed. +gro_normal_batch +---------------- + +Maximum number of the segments to batch up on output of GRO. When a packet +exits GRO, either as a coalesced superframe or as an original packet which +GRO has decided not to coalesce, it is placed on a per-NAPI list. This +list is then passed to the stack when the number of segments reaches the +gro_normal_batch limit. + 2. /proc/sys/net/unix - Parameters for Unix domain sockets ---------------------------------------------------------- diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst index 5300837ac2c9..1de6a57c7e1e 100644 --- a/Documentation/bpf/instruction-set.rst +++ b/Documentation/bpf/instruction-set.rst @@ -130,7 +130,7 @@ Byte swap instructions The byte swap instructions use an instruction class of ``BFP_ALU`` and a 4-bit code field of ``BPF_END``. -The byte swap instructions instructions operate on the destination register +The byte swap instructions operate on the destination register only and do not use a separate source register or immediate value. The 1-bit source operand field in the opcode is used to to select what byte @@ -157,7 +157,7 @@ Examples: dst_reg = htobe64(dst_reg) ``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and -``BPF_TO_LE`` respetively. +``BPF_TO_BE`` respectively. Jump instructions diff --git a/Documentation/bpf/libbpf/index.rst b/Documentation/bpf/libbpf/index.rst index 4e8c656b539a..3722537d1384 100644 --- a/Documentation/bpf/libbpf/index.rst +++ b/Documentation/bpf/libbpf/index.rst @@ -6,14 +6,13 @@ libbpf .. toctree:: :maxdepth: 1 + API Documentation <https://libbpf.readthedocs.io/en/latest/api.html> libbpf_naming_convention libbpf_build This is documentation for libbpf, a userspace library for loading and interacting with bpf programs. -For API documentation see the `versioned API documentation site <https://libbpf.readthedocs.io/en/latest/api.html>`_. - All general BPF questions, including kernel functionality, libbpf APIs and their application, should be sent to bpf@vger.kernel.org mailing list. You can `subscribe <http://vger.kernel.org/vger-lists.html#bpf>`_ to the diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml new file mode 100644 index 000000000000..9fbeb626ab23 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek PCIE Mirror Controller for MT7622 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The mediatek PCIE mirror provides a configuration interface for PCIE + controller on MT7622 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-pcie-mirror + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie_mirror: pcie-mirror@10000400 { + compatible = "mediatek,mt7622-pcie-mirror", "syscon"; + reg = <0 0x10000400 0 0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml new file mode 100644 index 000000000000..787d6673f952 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Wireless Ethernet Dispatch Controller for MT7622 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The mediatek wireless ethernet dispatch controller can be configured to + intercept and handle access to the WLAN DMA queues and PCIe interrupts + and implement hardware flow offloading from ethernet to WLAN. + +properties: + compatible: + items: + - enum: + - mediatek,mt7622-wed + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + wed0: wed@1020a000 { + compatible = "mediatek,mt7622-wed","syscon"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index 1129f2b58e98..77750df0c2c4 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -36,6 +36,21 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 + adi,phy-output-clock: + description: Select clock output on GP_CLK pin. Two clocks are available: + A 25MHz reference and a free-running 125MHz. + The phy can alternatively automatically switch between the reference and + the 125MHz clocks based on its internal state. + $ref: /schemas/types.yaml#/definitions/string + enum: + - 25mhz-reference + - 125mhz-free-running + - adaptive-free-running + + adi,phy-output-reference-clock: + description: Enable 25MHz reference clock output on CLK25_REF pin. + type: boolean + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index 1c88820cbcdf..f81eda8cb0a5 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -20,10 +20,14 @@ allOf: properties: compatible: const: aspeed,ast2600-mdio + reg: maxItems: 1 description: The register range of the MDIO controller instance + resets: + maxItems: 1 + required: - compatible - reg @@ -34,11 +38,13 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/ast2600-clock.h> mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; + resets = <&syscon ASPEED_RESET_MII>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml new file mode 100644 index 000000000000..4635cb96fc64 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CTU CAN FD Open-source IP Core Device Tree Bindings + +description: | + Open-source CAN FD IP core developed at the Czech Technical University in Prague + + The core sources and documentation on project page + [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf + + Integration in Xilinx Zynq SoC based system together with + OpenCores SJA1000 compatible controllers + [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + Martin Jerabek dimploma thesis with integration and testing + framework description + [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +maintainers: + - Pavel Pisa <pisa@cmp.felk.cvut.cz> + - Ondrej Ille <ondrej.ille@gmail.com> + - Martin Jerabek <martin.jerabek01@gmail.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ctu,ctucanfd-2 + - const: ctu,ctucanfd + - const: ctu,ctucanfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: | + phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index b3826af6bd6e..7a73057707b4 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -5,8 +5,8 @@ $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: - Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree - bindings + Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN + controller device tree bindings maintainers: - Marc Kleine-Budde <mkl@pengutronix.de> @@ -17,13 +17,14 @@ allOf: properties: compatible: oneOf: - - const: microchip,mcp2517fd - description: for MCP2517FD - - const: microchip,mcp2518fd - description: for MCP2518FD - - const: microchip,mcp251xfd - description: to autodetect chip variant - + - enum: + - microchip,mcp2517fd + - microchip,mcp2518fd + - microchip,mcp251xfd + - items: + - enum: + - microchip,mcp251863 + - const: microchip,mcp2518fd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index f98c53dc1894..6f71fc96bc4e 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -23,6 +23,7 @@ properties: - renesas,r8a774e1-canfd # RZ/G2H - renesas,r8a7795-canfd # R-Car H3 - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77961-canfd # R-Car M3-W+ - renesas,r8a77965-canfd # R-Car M3-N - renesas,r8a77970-canfd # R-Car V3M - renesas,r8a77980-canfd # R-Car V3H @@ -32,6 +33,7 @@ properties: - items: - enum: + - renesas,r9a07g043-canfd # RZ/G2UL - renesas,r9a07g044-canfd # RZ/G2{L,LC} - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family @@ -86,6 +88,7 @@ required: - compatible - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -134,7 +137,6 @@ then: - const: rstc_n required: - - interrupt-names - reset-names else: properties: @@ -165,6 +167,7 @@ examples: reg = <0xe66c0000 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 6cd3d853dcba..e5b628736930 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -84,13 +84,6 @@ properties: phys: maxItems: 1 - phy-names: - const: sgmii-phy - description: - Required with ZynqMP SoC when in SGMII mode. - Should reference PS-GTR generic PHY device for this controller - instance. See ZynqMP example. - resets: maxItems: 1 description: @@ -204,7 +197,6 @@ examples: reset-names = "gem1_rst"; status = "okay"; phy-mode = "sgmii"; - phy-names = "sgmii-phy"; phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; fixed-link { speed = <1000>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index ee42328a109d..ed1415a4381f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -77,6 +77,15 @@ properties: description: Maximum PHY supported speed in Mbits / seconds. + phy-10base-t1l-2.4vpp: + description: | + tristate, request/disable 2.4 Vpp operating mode. The values are: + 0: Disable 2.4 Vpp operating mode. + 1: Request 2.4 Vpp operating mode from link partner. + Absence of this property will leave configuration to default values. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] + broken-turn-around: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml new file mode 100644 index 000000000000..d2906b4a0f59 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MDIO Ethernet Controller interface + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: | + The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0, + Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that + provides an interface with the MDIO bus. Additionally, Armada 7k and Armada + 8k has a second unit which provides an interface with the xMDIO bus. This + driver handles these interfaces. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - marvell,orion-mdio + - marvell,xmdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio@d0072004 { + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x4>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <30>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt deleted file mode 100644 index 3f3cfc1d8d4d..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Marvell MDIO Ethernet Controller interface - -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an -identical unit that provides an interface with the MDIO bus. -Additionally, Armada 7k and Armada 8k has a second unit which -provides an interface with the xMDIO bus. This driver handles -these interfaces. - -Required properties: -- compatible: "marvell,orion-mdio" or "marvell,xmdio" -- reg: address and length of the MDIO registers. When an interrupt is - not present, the length is the size of the SMI register (4 bytes) - otherwise it must be 0x84 bytes to cover the interrupt control - registers. - -Optional properties: -- interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to four required clocks for the MDIO instance - -The child nodes of the MDIO driver are the individual PHY devices -connected to this MDIO bus. They must have a "reg" property given the -PHY address on the MDIO bus. - -Example at the SoC level without an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; -}; - -Example with an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x84>; - interrupts = <30>; -}; - -And at the board level: - -mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -} diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml new file mode 100644 index 000000000000..699164dd1295 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -0,0 +1,434 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs + have dual GMAC ports. + +properties: + compatible: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + - mediatek,mt7622-eth + - mediatek,mt7629-eth + - mediatek,mt7986-eth + - ralink,rt5350-eth + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: fe + - const: gmac + - const: ppe + + mediatek,ethsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the port setup. + + cci-control-port: true + + mediatek,hifsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek hifsys controller used to provide various clocks + and reset to the system. + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + description: + A list of phandle to the syscon node that handles the SGMII setup which is required for + those SoCs equipped with SGMII. + + dma-coherent: true + + mdio-bus: + $ref: mdio.yaml# + unevaluatedProperties: false + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp1 + - const: gp2 + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7622-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,sgmiisys: + minItems: 1 + maxItems: 1 + + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7629-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 17 + maxItems: 17 + + clock-names: + items: + - const: ethif + - const: sgmiitop + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: fe + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu1 + - const: wocpu0 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + +patternProperties: + "^mac@[0-1]$": + type: object + additionalProperties: false + allOf: + - $ref: ethernet-controller.yaml# + description: + Ethernet MAC node + properties: + compatible: + const: mediatek,eth-mac + + reg: + maxItems: 1 + + phy-handle: true + + phy-mode: true + + required: + - reg + - compatible + - phy-handle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,ethsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/power/mt7622-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ethernet: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; + + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + reg = <0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + reg = <1>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@15100000 { + #define CLK_ETH_FE_EN 0 + #define CLK_ETH_WOCPU1_EN 3 + #define CLK_ETH_WOCPU0_EN 4 + #define CLK_TOP_NETSYS_SEL 43 + #define CLK_TOP_NETSYS_500M_SEL 44 + #define CLK_TOP_NETSYS_2X_SEL 46 + #define CLK_TOP_SGM_325M_SEL 47 + #define CLK_APMIXED_NET2PLL 1 + #define CLK_APMIXED_SGMPLL 3 + + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII_TX250M_EN>, + <&sgmiisys0 CLK_SGMII_RX250M_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX250M_EN>, + <&sgmiisys1 CLK_SGMII_RX250M_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@0 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reset-gpios = <&pio 6 1>; + reset-deassert-us = <20000>; + reg = <5>; + }; + + phy6: ethernet-phy@1 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reg = <6>; + }; + }; + + mac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + reg = <0>; + }; + + mac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt deleted file mode 100644 index 72d03e07cf7c..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ /dev/null @@ -1,98 +0,0 @@ -MediaTek Frame Engine Ethernet controller -========================================= - -The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs -have dual GMAC each represented by a child node.. - -* Ethernet controller node - -Required properties: -- compatible: Should be - "mediatek,mt2701-eth": for MT2701 SoC - "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC - "mediatek,mt7622-eth": for MT7622 SoC - "mediatek,mt7629-eth": for MT7629 SoC - "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the three frame engines interrupts in numeric - order. These are fe_int0, fe_int1 and fe_int2. -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC - "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", - "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", - "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", - "eth2pll" : For MT7629 SoC. -- power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain phandles to the ethsys reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property - These are "fe", "gmac" and "ppe" -- mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,infracfg: phandle to the syscon node that handles the path from - GMAC to PHY variants, which is required for MT7629 SoC. -- mediatek,sgmiisys: a list of phandles to the syscon node that handles the - SGMII setup which is required for those SoCs equipped with SGMII such - as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared - by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed - to GMAC1 and GMAC2, respectively. -- mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current: only for MT2701 and MT7623 SoC - -* Ethernet MAC node - -Required properties: -- compatible: Should be "mediatek,eth-mac" -- reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory and - the phy-mode "trgmii" required being provided when reg - is equal to 0 and the MAC uses fixed-link to connect - with internal switch such as MT7530. - -Example: - -eth: ethernet@1b100000 { - compatible = "mediatek,mt7623-eth"; - reg = <0 0x1b100000 0 0x20000>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW - GIC_SPI 199 IRQ_TYPE_LEVEL_LOW - GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - resets = <ðsys MT2701_ETHSYS_ETH_RST>; - reset-names = "eth"; - mediatek,ethsys = <ðsys>; - mediatek,pctl = <&syscfg_pctl_a>; - #address-cells = <1>; - #size-cells = <0>; - - gmac1: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy0>; - }; - - gmac2: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy1>; - }; - - mdio-bus { - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 8d157f0295a5..a9ed691ffb03 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -45,3 +45,12 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. + + - coma-mode-gpios: If present the given gpio will be deasserted when the + PHY is probed. + + Some PHYs have a COMA mode input pin which puts the PHY into + isolate and power-down mode. On some boards this input is connected + to a GPIO of the SoC. + + Supported on the LAN8814. diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml index 13812768b923..dc116f14750e 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -39,6 +39,7 @@ properties: - description: frame dma based extraction - description: analyzer interrupt - description: ptp interrupt + - description: ptp external interrupt interrupt-names: minItems: 1 @@ -47,16 +48,15 @@ properties: - const: fdma - const: ana - const: ptp + - const: ptp-ext resets: items: - description: Reset controller used for switch core reset (soft reset) - - description: Reset controller used for releasing the phy from reset reset-names: items: - const: switch - - const: phy ethernet-ports: type: object @@ -145,8 +145,8 @@ examples: reg-names = "cpu", "gcb"; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "xtr"; - resets = <&switch_reset 0>, <&phy_reset 0>; - reset-names = "switch", "phy"; + resets = <&switch_reset 0>; + reset-names = "switch"; ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml new file mode 100644 index 000000000000..2c451cfa4e0b --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,miim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi MII Management Controller (MIIM) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - mscc,ocelot-miim + - microchip,lan966x-miim + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + items: + - description: base address + - description: associated reset register for internal PHYs + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio@107009c { + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x36>, <0x10700f0 0x8>; + interrupts = <14>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt deleted file mode 100644 index 70e0cb1ee485..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-miim.txt +++ /dev/null @@ -1,26 +0,0 @@ -Microsemi MII Management Controller (MIIM) / MDIO -================================================= - -Properties: -- compatible: must be "mscc,ocelot-miim" or "microchip,lan966x-miim" -- reg: The base address of the MDIO bus controller register bank. Optionally, a - second register bank can be defined if there is an associated reset register - for internal PHYs -- #address-cells: Must be <1>. -- #size-cells: Must be <0>. MDIO addresses have no size component. -- interrupts: interrupt specifier (refer to the interrupt binding) - -Typically an MDIO bus might have several children. - -Example: - mdio@107009c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mscc,ocelot-miim"; - reg = <0x107009c 0x36>, <0x10700f0 0x8>; - interrupts = <14>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index ee2ccacc39ff..acf347f3cdbe 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -45,6 +45,11 @@ properties: - items: - enum: + - renesas,etheravb-r9a09g011 # RZ/V2M + - const: renesas,etheravb-rzv2m # RZ/V2M compatible + + - items: + - enum: - renesas,r9a07g043-gbeth # RZ/G2UL - renesas,r9a07g044-gbeth # RZ/G2{L,LC} - renesas,r9a07g054-gbeth # RZ/V2L @@ -160,16 +165,33 @@ allOf: - const: arp_ns rx-internal-delay-ps: false else: - properties: - interrupts: - minItems: 25 - maxItems: 25 - interrupt-names: - items: - pattern: '^ch[0-9]+$' - required: - - interrupt-names - - rx-internal-delay-ps + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + interrupts: + minItems: 29 + maxItems: 29 + interrupt-names: + items: + pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$' + rx-internal-delay-ps: false + required: + - interrupt-names + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps - if: properties: @@ -231,17 +253,35 @@ allOf: - const: chi - const: refclk else: - properties: - clocks: - minItems: 1 - items: - - description: AVB functional clock - - description: Optional TXC reference clock - clock-names: - minItems: 1 - items: - - const: fck - - const: refclk + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + clocks: + items: + - description: Main clock + - description: Coherent Hub Interface clock + - description: gPTP reference clock + clock-names: + items: + - const: axi + - const: chi + - const: gptp + else: + properties: + clocks: + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml new file mode 100644 index 000000000000..62dffee27c3d --- /dev/null +++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Dual Ethernet MAC Device Tree Bindings + +maintainers: + - Wells Lu <wellslutw@gmail.com> + +description: | + Sunplus SP7021 dual 10M/100M Ethernet MAC controller. + Device node of the controller has following properties. + +properties: + compatible: + const: sunplus,sp7021-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ethernet-ports: + type: object + description: Ethernet ports to PHY + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-1]$": + type: object + description: Port to PHY + + properties: + reg: + minimum: 0 + maximum: 1 + + phy-handle: + maxItems: 1 + + phy-mode: + maxItems: 1 + + nvmem-cells: + items: + - description: nvmem cell address of MAC address + + nvmem-cell-names: + description: names corresponding to the nvmem cells + items: + - const: mac-address + + required: + - reg + - phy-handle + - phy-mode + - nvmem-cells + - nvmem-cell-names + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - pinctrl-0 + - pinctrl-names + - ethernet-ports + - mdio + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@9c108000 { + compatible = "sunplus,sp7021-emac"; + reg = <0x9c108000 0x400>; + interrupt-parent = <&intc>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0xa7>; + resets = <&rstc 0x97>; + pinctrl-0 = <&emac_demo_board_v3_pins>; + pinctrl-names = "default"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; + + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index b12bfe61c67a..0988ed8d1c12 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -52,6 +52,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/toshiba,tmpv770x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> soc { @@ -63,7 +64,7 @@ examples: reg = <0 0x28000000 0 0x10000>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - clocks = <&clk300mhz>, <&clk125mhz>; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; clock-names = "stmmaceth", "phy_ref_clk"; snps,txpbl = <4>; snps,rxpbl = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index cdf7b873b419..6b32caa8311c 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -20,120 +20,17 @@ properties: enum: - qcom,ipq8074-wifi - qcom,ipq6018-wifi + - qcom,wcn6750-wifi reg: maxItems: 1 interrupts: - items: - - description: misc-pulse1 interrupt events - - description: misc-latch interrupt events - - description: sw exception interrupt events - - description: watchdog interrupt events - - description: interrupt event for ring CE0 - - description: interrupt event for ring CE1 - - description: interrupt event for ring CE2 - - description: interrupt event for ring CE3 - - description: interrupt event for ring CE4 - - description: interrupt event for ring CE5 - - description: interrupt event for ring CE6 - - description: interrupt event for ring CE7 - - description: interrupt event for ring CE8 - - description: interrupt event for ring CE9 - - description: interrupt event for ring CE10 - - description: interrupt event for ring CE11 - - description: interrupt event for ring host2wbm-desc-feed - - description: interrupt event for ring host2reo-re-injection - - description: interrupt event for ring host2reo-command - - description: interrupt event for ring host2rxdma-monitor-ring3 - - description: interrupt event for ring host2rxdma-monitor-ring2 - - description: interrupt event for ring host2rxdma-monitor-ring1 - - description: interrupt event for ring reo2ost-exception - - description: interrupt event for ring wbm2host-rx-release - - description: interrupt event for ring reo2host-status - - description: interrupt event for ring reo2host-destination-ring4 - - description: interrupt event for ring reo2host-destination-ring3 - - description: interrupt event for ring reo2host-destination-ring2 - - description: interrupt event for ring reo2host-destination-ring1 - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 - - description: interrupt event for ring ppdu-end-interrupts-mac3 - - description: interrupt event for ring ppdu-end-interrupts-mac2 - - description: interrupt event for ring ppdu-end-interrupts-mac1 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 - - description: interrupt event for ring rxdma2host-destination-ring-mac3 - - description: interrupt event for ring rxdma2host-destination-ring-mac2 - - description: interrupt event for ring rxdma2host-destination-ring-mac1 - - description: interrupt event for ring host2tcl-input-ring4 - - description: interrupt event for ring host2tcl-input-ring3 - - description: interrupt event for ring host2tcl-input-ring2 - - description: interrupt event for ring host2tcl-input-ring1 - - description: interrupt event for ring wbm2host-tx-completions-ring3 - - description: interrupt event for ring wbm2host-tx-completions-ring2 - - description: interrupt event for ring wbm2host-tx-completions-ring1 - - description: interrupt event for ring tcl2host-status-ring - + minItems: 32 + maxItems: 52 interrupt-names: - items: - - const: misc-pulse1 - - const: misc-latch - - const: sw-exception - - const: watchdog - - const: ce0 - - const: ce1 - - const: ce2 - - const: ce3 - - const: ce4 - - const: ce5 - - const: ce6 - - const: ce7 - - const: ce8 - - const: ce9 - - const: ce10 - - const: ce11 - - const: host2wbm-desc-feed - - const: host2reo-re-injection - - const: host2reo-command - - const: host2rxdma-monitor-ring3 - - const: host2rxdma-monitor-ring2 - - const: host2rxdma-monitor-ring1 - - const: reo2ost-exception - - const: wbm2host-rx-release - - const: reo2host-status - - const: reo2host-destination-ring4 - - const: reo2host-destination-ring3 - - const: reo2host-destination-ring2 - - const: reo2host-destination-ring1 - - const: rxdma2host-monitor-destination-mac3 - - const: rxdma2host-monitor-destination-mac2 - - const: rxdma2host-monitor-destination-mac1 - - const: ppdu-end-interrupts-mac3 - - const: ppdu-end-interrupts-mac2 - - const: ppdu-end-interrupts-mac1 - - const: rxdma2host-monitor-status-ring-mac3 - - const: rxdma2host-monitor-status-ring-mac2 - - const: rxdma2host-monitor-status-ring-mac1 - - const: host2rxdma-host-buf-ring-mac3 - - const: host2rxdma-host-buf-ring-mac2 - - const: host2rxdma-host-buf-ring-mac1 - - const: rxdma2host-destination-ring-mac3 - - const: rxdma2host-destination-ring-mac2 - - const: rxdma2host-destination-ring-mac1 - - const: host2tcl-input-ring4 - - const: host2tcl-input-ring3 - - const: host2tcl-input-ring2 - - const: host2tcl-input-ring1 - - const: wbm2host-tx-completions-ring3 - - const: wbm2host-tx-completions-ring2 - - const: wbm2host-tx-completions-ring1 - - const: tcl2host-status-ring + maxItems: 52 qcom,rproc: $ref: /schemas/types.yaml#/definitions/phandle @@ -151,20 +48,205 @@ properties: board-2.bin for designs with colliding bus and device specific ids memory-region: - maxItems: 1 + minItems: 1 + maxItems: 2 description: phandle to a node describing reserved memory (System RAM memory) used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + required: + - iommus + required: - compatible - reg - interrupts - - interrupt-names - qcom,rproc additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + examples: - | @@ -309,3 +391,64 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17a10040 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 105725a127ab..f5a531738d93 100644 --- a/Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -3,7 +3,7 @@ %YAML 1.2 --- -$id: http://devicetree.org/schemas/staging/net/wireless/silabs,wfx.yaml# +$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Labs WFxxx devicetree bindings diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 65ff22364fb3..2bf2b3accc8e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -283,6 +283,8 @@ patternProperties: description: Shenzen Chuangsiqi Technology Co.,Ltd. "^ctera,.*": description: CTERA Networks Intl. + "^ctu,.*": + description: Czech Technical University in Prague "^cubietech,.*": description: Cubietech, Ltd. "^cui,.*": diff --git a/Documentation/networking/device_drivers/appletalk/index.rst b/Documentation/networking/device_drivers/appletalk/index.rst index de7507f02037..c196baeb0856 100644 --- a/Documentation/networking/device_drivers/appletalk/index.rst +++ b/Documentation/networking/device_drivers/appletalk/index.rst @@ -9,7 +9,6 @@ Contents: :maxdepth: 2 cops - ltpc .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/appletalk/ltpc.rst b/Documentation/networking/device_drivers/appletalk/ltpc.rst deleted file mode 100644 index 0ad197fd17ce..000000000000 --- a/Documentation/networking/device_drivers/appletalk/ltpc.rst +++ /dev/null @@ -1,144 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=========== -LTPC Driver -=========== - -This is the ALPHA version of the ltpc driver. - -In order to use it, you will need at least version 1.3.3 of the -netatalk package, and the Apple or Farallon LocalTalk PC card. -There are a number of different LocalTalk cards for the PC; this -driver applies only to the one with the 65c02 processor chip on it. - -To include it in the kernel, select the CONFIG_LTPC switch in the -configuration dialog. You can also compile it as a module. - -While the driver will attempt to autoprobe the I/O port address, IRQ -line, and DMA channel of the card, this does not always work. For -this reason, you should be prepared to supply these parameters -yourself. (see "Card Configuration" below for how to determine or -change the settings on your card) - -When the driver is compiled into the kernel, you can add a line such -as the following to your /etc/lilo.conf:: - - append="ltpc=0x240,9,1" - -where the parameters (in order) are the port address, IRQ, and DMA -channel. The second and third values can be omitted, in which case -the driver will try to determine them itself. - -If you load the driver as a module, you can pass the parameters "io=", -"irq=", and "dma=" on the command line with insmod or modprobe, or add -them as options in a configuration file in /etc/modprobe.d/ directory:: - - alias lt0 ltpc # autoload the module when the interface is configured - options ltpc io=0x240 irq=9 dma=1 - -Before starting up the netatalk demons (perhaps in rc.local), you -need to add a line such as:: - - /sbin/ifconfig lt0 127.0.0.42 - -The address is unimportant - however, the card needs to be configured -with ifconfig so that Netatalk can find it. - -The appropriate netatalk configuration depends on whether you are -attached to a network that includes AppleTalk routers or not. If, -like me, you are simply connecting to your home Macintoshes and -printers, you need to set up netatalk to "seed". The way I do this -is to have the lines:: - - dummy -seed -phase 2 -net 2000 -addr 2000.26 -zone "1033" - lt0 -seed -phase 1 -net 1033 -addr 1033.27 -zone "1033" - -in my atalkd.conf. What is going on here is that I need to fool -netatalk into thinking that there are two AppleTalk interfaces -present; otherwise, it refuses to seed. This is a hack, and a more -permanent solution would be to alter the netatalk code. Also, make -sure you have the correct name for the dummy interface - If it's -compiled as a module, you will need to refer to it as "dummy0" or some -such. - -If you are attached to an extended AppleTalk network, with routers on -it, then you don't need to fool around with this -- the appropriate -line in atalkd.conf is:: - - lt0 -phase 1 - - -Card Configuration -================== - -The interrupts and so forth are configured via the dipswitch on the -board. Set the switches so as not to conflict with other hardware. - - Interrupts -- set at most one. If none are set, the driver uses - polled mode. Because the card was developed in the XT era, the - original documentation refers to IRQ2. Since you'll be running - this on an AT (or later) class machine, that really means IRQ9. - - === =========================================================== - SW1 IRQ 4 - SW2 IRQ 3 - SW3 IRQ 9 (2 in original card documentation only applies to XT) - === =========================================================== - - - DMA -- choose DMA 1 or 3, and set both corresponding switches. - - === ===== - SW4 DMA 3 - SW5 DMA 1 - SW6 DMA 3 - SW7 DMA 1 - === ===== - - - I/O address -- choose one. - - === ========= - SW8 220 / 240 - === ========= - - -IP -== - -Yes, it is possible to do IP over LocalTalk. However, you can't just -treat the LocalTalk device like an ordinary Ethernet device, even if -that's what it looks like to Netatalk. - -Instead, you follow the same procedure as for doing IP in EtherTalk. -See Documentation/networking/ipddp.rst for more information about the -kernel driver and userspace tools needed. - - -Bugs -==== - -IRQ autoprobing often doesn't work on a cold boot. To get around -this, either compile the driver as a module, or pass the parameters -for the card to the kernel as described above. - -Also, as usual, autoprobing is not recommended when you use the driver -as a module. (though it usually works at boot time, at least) - -Polled mode is *really* slow sometimes, but this seems to depend on -the configuration of the network. - -It may theoretically be possible to use two LTPC cards in the same -machine, but this is unsupported, so if you really want to do this, -you'll probably have to hack the initialization code a bit. - - -Thanks -====== - -Thanks to Alan Cox for helpful discussions early on in this -work, and to Denis Hainsworth for doing the bleeding-edge testing. - -Bradford Johnson <bradford@math.umn.edu> - -Updated 11/09/1998 by David Huggins-Daines <dhd@debian.org> diff --git a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst new file mode 100644 index 000000000000..40c92ea272af --- /dev/null +++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst @@ -0,0 +1,639 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +CTU CAN FD Driver +================= + +Author: Martin Jerabek <martin.jerabek01@gmail.com> + + +About CTU CAN FD IP Core +------------------------ + +`CTU CAN FD <https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_ +is an open source soft core written in VHDL. +It originated in 2015 as Ondrej Ille's project +at the `Department of Measurement <https://meas.fel.cvut.cz/>`_ +of `FEE <http://www.fel.cvut.cz/en/>`_ at `CTU <https://www.cvut.cz/en>`_. + +The SocketCAN driver for Xilinx Zynq SoC based MicroZed board +`Vivado integration <https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top>`_ +and Intel Cyclone V 5CSEMA4U23C6 based DE0-Nano-SoC Terasic board +`QSys integration <https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd>`_ +has been developed as well as support for +`PCIe integration <https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd>`_ of the core. + +In the case of Zynq, the core is connected via the APB system bus, which does +not have enumeration support, and the device must be specified in Device Tree. +This kind of devices is called platform device in the kernel and is +handled by a platform device driver. + +The basic functional model of the CTU CAN FD peripheral has been +accepted into QEMU mainline. See QEMU `CAN emulation support <https://www.qemu.org/docs/master/system/devices/can.html>`_ +for CAN FD buses, host connection and CTU CAN FD core emulation. The development +version of emulation support can be cloned from ctu-canfd branch of QEMU local +development `repository <https://gitlab.fel.cvut.cz/canbus/qemu-canbus>`_. + + +About SocketCAN +--------------- + +SocketCAN is a standard common interface for CAN devices in the Linux +kernel. As the name suggests, the bus is accessed via sockets, similarly +to common network devices. The reasoning behind this is in depth +described in `Linux SocketCAN <https://www.kernel.org/doc/html/latest/networking/can.html>`_. +In short, it offers a +natural way to implement and work with higher layer protocols over CAN, +in the same way as, e.g., UDP/IP over Ethernet. + +Device probe +~~~~~~~~~~~~ + +Before going into detail about the structure of a CAN bus device driver, +let's reiterate how the kernel gets to know about the device at all. +Some buses, like PCI or PCIe, support device enumeration. That is, when +the system boots, it discovers all the devices on the bus and reads +their configuration. The kernel identifies the device via its vendor ID +and device ID, and if there is a driver registered for this identifier +combination, its probe method is invoked to populate the driver's +instance for the given hardware. A similar situation goes with USB, only +it allows for device hot-plug. + +The situation is different for peripherals which are directly embedded +in the SoC and connected to an internal system bus (AXI, APB, Avalon, +and others). These buses do not support enumeration, and thus the kernel +has to learn about the devices from elsewhere. This is exactly what the +Device Tree was made for. + +Device tree +~~~~~~~~~~~ + +An entry in device tree states that a device exists in the system, how +it is reachable (on which bus it resides) and its configuration – +registers address, interrupts and so on. An example of such a device +tree is given in . + +:: + + / { + /* ... */ + amba: amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + CTU_CAN_FD_0: CTU_CAN_FD@43c30000 { + compatible = "ctu,ctucanfd"; + interrupt-parent = <&intc>; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; + }; + }; + + +.. _sec:socketcan:drv: + +Driver structure +~~~~~~~~~~~~~~~~ + +The driver can be divided into two parts – platform-dependent device +discovery and set up, and platform-independent CAN network device +implementation. + +.. _sec:socketcan:platdev: + +Platform device driver +^^^^^^^^^^^^^^^^^^^^^^ + +In the case of Zynq, the core is connected via the AXI system bus, which +does not have enumeration support, and the device must be specified in +Device Tree. This kind of devices is called *platform device* in the +kernel and is handled by a *platform device driver*\ [1]_. + +A platform device driver provides the following things: + +- A *probe* function + +- A *remove* function + +- A table of *compatible* devices that the driver can handle + +The *probe* function is called exactly once when the device appears (or +the driver is loaded, whichever happens later). If there are more +devices handled by the same driver, the *probe* function is called for +each one of them. Its role is to allocate and initialize resources +required for handling the device, as well as set up low-level functions +for the platform-independent layer, e.g., *read_reg* and *write_reg*. +After that, the driver registers the device to a higher layer, in our +case as a *network device*. + +The *remove* function is called when the device disappears, or the +driver is about to be unloaded. It serves to free the resources +allocated in *probe* and to unregister the device from higher layers. + +Finally, the table of *compatible* devices states which devices the +driver can handle. The Device Tree entry ``compatible`` is matched +against the tables of all *platform drivers*. + +.. code:: c + + /* Match table for OF platform binding */ + static const struct of_device_id ctucan_of_match[] = { + { .compatible = "ctu,canfd-2", }, + { .compatible = "ctu,ctucanfd", }, + { /* end of list */ }, + }; + MODULE_DEVICE_TABLE(of, ctucan_of_match); + + static int ctucan_probe(struct platform_device *pdev); + static int ctucan_remove(struct platform_device *pdev); + + static struct platform_driver ctucanfd_driver = { + .probe = ctucan_probe, + .remove = ctucan_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = ctucan_of_match, + }, + }; + module_platform_driver(ctucanfd_driver); + + +.. _sec:socketcan:netdev: + +Network device driver +^^^^^^^^^^^^^^^^^^^^^ + +Each network device must support at least these operations: + +- Bring the device up: ``ndo_open`` + +- Bring the device down: ``ndo_close`` + +- Submit TX frames to the device: ``ndo_start_xmit`` + +- Signal TX completion and errors to the network subsystem: ISR + +- Submit RX frames to the network subsystem: ISR and NAPI + +There are two possible event sources: the device and the network +subsystem. Device events are usually signaled via an interrupt, handled +in an Interrupt Service Routine (ISR). Handlers for the events +originating in the network subsystem are then specified in +``struct net_device_ops``. + +When the device is brought up, e.g., by calling ``ip link set can0 up``, +the driver’s function ``ndo_open`` is called. It should validate the +interface configuration and configure and enable the device. The +analogous opposite is ``ndo_close``, called when the device is being +brought down, be it explicitly or implicitly. + +When the system should transmit a frame, it does so by calling +``ndo_start_xmit``, which enqueues the frame into the device. If the +device HW queue (FIFO, mailboxes or whatever the implementation is) +becomes full, the ``ndo_start_xmit`` implementation informs the network +subsystem that it should stop the TX queue (via ``netif_stop_queue``). +It is then re-enabled later in ISR when the device has some space +available again and is able to enqueue another frame. + +All the device events are handled in ISR, namely: + +#. **TX completion**. When the device successfully finishes transmitting + a frame, the frame is echoed locally. On error, an informative error + frame [2]_ is sent to the network subsystem instead. In both cases, + the software TX queue is resumed so that more frames may be sent. + +#. **Error condition**. If something goes wrong (e.g., the device goes + bus-off or RX overrun happens), error counters are updated, and + informative error frames are enqueued to SW RX queue. + +#. **RX buffer not empty**. In this case, read the RX frames and enqueue + them to SW RX queue. Usually NAPI is used as a middle layer (see ). + +.. _sec:socketcan:napi: + +NAPI +~~~~ + +The frequency of incoming frames can be high and the overhead to invoke +the interrupt service routine for each frame can cause significant +system load. There are multiple mechanisms in the Linux kernel to deal +with this situation. They evolved over the years of Linux kernel +development and enhancements. For network devices, the current standard +is NAPI – *the New API*. It is similar to classical top-half/bottom-half +interrupt handling in that it only acknowledges the interrupt in the ISR +and signals that the rest of the processing should be done in softirq +context. On top of that, it offers the possibility to *poll* for new +frames for a while. This has a potential to avoid the costly round of +enabling interrupts, handling an incoming IRQ in ISR, re-enabling the +softirq and switching context back to softirq. + +More detailed documentation of NAPI may be found on the pages of Linux +Foundation `<https://wiki.linuxfoundation.org/networking/napi>`_. + +Integrating the core to Xilinx Zynq +----------------------------------- + +The core interfaces a simple subset of the Avalon +(search for Intel **Avalon Interface Specifications**) +bus as it was originally used on +Alterra FPGA chips, yet Xilinx natively interfaces with AXI +(search for ARM **AMBA AXI and ACE Protocol Specification AXI3, +AXI4, and AXI4-Lite, ACE and ACE-Lite**). +The most obvious solution would be to use +an Avalon/AXI bridge or implement some simple conversion entity. +However, the core’s interface is half-duplex with no handshake +signaling, whereas AXI is full duplex with two-way signaling. Moreover, +even AXI-Lite slave interface is quite resource-intensive, and the +flexibility and speed of AXI are not required for a CAN core. + +Thus a much simpler bus was chosen – APB (Advanced Peripheral Bus) +(search for ARM **AMBA APB Protocol Specification**). +APB-AXI bridge is directly available in +Xilinx Vivado, and the interface adaptor entity is just a few simple +combinatorial assignments. + +Finally, to be able to include the core in a block diagram as a custom +IP, the core, together with the APB interface, has been packaged as a +Vivado component. + +CTU CAN FD Driver design +------------------------ + +The general structure of a CAN device driver has already been examined +in . The next paragraphs provide a more detailed description of the CTU +CAN FD core driver in particular. + +Low-level driver +~~~~~~~~~~~~~~~~ + +The core is not intended to be used solely with SocketCAN, and thus it +is desirable to have an OS-independent low-level driver. This low-level +driver can then be used in implementations of OS driver or directly +either on bare metal or in a user-space application. Another advantage +is that if the hardware slightly changes, only the low-level driver +needs to be modified. + +The code [3]_ is in part automatically generated and in part written +manually by the core author, with contributions of the thesis’ author. +The low-level driver supports operations such as: set bit timing, set +controller mode, enable/disable, read RX frame, write TX frame, and so +on. + +Configuring bit timing +~~~~~~~~~~~~~~~~~~~~~~ + +On CAN, each bit is divided into four segments: SYNC, PROP, PHASE1, and +PHASE2. Their duration is expressed in multiples of a Time Quantum +(details in `CAN Specification, Version 2.0 <http://esd.cs.ucr.edu/webres/can20.pdf>`_, chapter 8). +When configuring +bitrate, the durations of all the segments (and time quantum) must be +computed from the bitrate and Sample Point. This is performed +independently for both the Nominal bitrate and Data bitrate for CAN FD. + +SocketCAN is fairly flexible and offers either highly customized +configuration by setting all the segment durations manually, or a +convenient configuration by setting just the bitrate and sample point +(and even that is chosen automatically per Bosch recommendation if not +specified). However, each CAN controller may have different base clock +frequency and different width of segment duration registers. The +algorithm thus needs the minimum and maximum values for the durations +(and clock prescaler) and tries to optimize the numbers to fit both the +constraints and the requested parameters. + +.. code:: c + + struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segment 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; + }; + + +[lst:can_bittiming_const] + +A curious reader will notice that the durations of the segments PROP_SEG +and PHASE_SEG1 are not determined separately but rather combined and +then, by default, the resulting TSEG1 is evenly divided between PROP_SEG +and PHASE_SEG1. In practice, this has virtually no consequences as the +sample point is between PHASE_SEG1 and PHASE_SEG2. In CTU CAN FD, +however, the duration registers ``PROP`` and ``PH1`` have different +widths (6 and 7 bits, respectively), so the auto-computed values might +overflow the shorter register and must thus be redistributed among the +two [4]_. + +Handling RX +~~~~~~~~~~~ + +Frame reception is handled in NAPI queue, which is enabled from ISR when +the RXNE (RX FIFO Not Empty) bit is set. Frames are read one by one +until either no frame is left in the RX FIFO or the maximum work quota +has been reached for the NAPI poll run (see ). Each frame is then passed +to the network interface RX queue. + +An incoming frame may be either a CAN 2.0 frame or a CAN FD frame. The +way to distinguish between these two in the kernel is to allocate either +``struct can_frame`` or ``struct canfd_frame``, the two having different +sizes. In the controller, the information about the frame type is stored +in the first word of RX FIFO. + +This brings us a chicken-egg problem: we want to allocate the ``skb`` +for the frame, and only if it succeeds, fetch the frame from FIFO; +otherwise keep it there for later. But to be able to allocate the +correct ``skb``, we have to fetch the first work of FIFO. There are +several possible solutions: + +#. Read the word, then allocate. If it fails, discard the rest of the + frame. When the system is low on memory, the situation is bad anyway. + +#. Always allocate ``skb`` big enough for an FD frame beforehand. Then + tweak the ``skb`` internals to look like it has been allocated for + the smaller CAN 2.0 frame. + +#. Add option to peek into the FIFO instead of consuming the word. + +#. If the allocation fails, store the read word into driver’s data. On + the next try, use the stored word instead of reading it again. + +Option 1 is simple enough, but not very satisfying if we could do +better. Option 2 is not acceptable, as it would require modifying the +private state of an integral kernel structure. The slightly higher +memory consumption is just a virtual cherry on top of the “cake”. Option +3 requires non-trivial HW changes and is not ideal from the HW point of +view. + +Option 4 seems like a good compromise, with its disadvantage being that +a partial frame may stay in the FIFO for a prolonged time. Nonetheless, +there may be just one owner of the RX FIFO, and thus no one else should +see the partial frame (disregarding some exotic debugging scenarios). +Basides, the driver resets the core on its initialization, so the +partial frame cannot be “adopted” either. In the end, option 4 was +selected [5]_. + +.. _subsec:ctucanfd:rxtimestamp: + +Timestamping RX frames +^^^^^^^^^^^^^^^^^^^^^^ + +The CTU CAN FD core reports the exact timestamp when the frame has been +received. The timestamp is by default captured at the sample point of +the last bit of EOF but is configurable to be captured at the SOF bit. +The timestamp source is external to the core and may be up to 64 bits +wide. At the time of writing, passing the timestamp from kernel to +userspace is not yet implemented, but is planned in the future. + +Handling TX +~~~~~~~~~~~ + +The CTU CAN FD core has 4 independent TX buffers, each with its own +state and priority. When the core wants to transmit, a TX buffer in +Ready state with the highest priority is selected. + +The priorities are 3bit numbers in register TX_PRIORITY +(nibble-aligned). This should be flexible enough for most use cases. +SocketCAN, however, supports only one FIFO queue for outgoing +frames [6]_. The buffer priorities may be used to simulate the FIFO +behavior by assigning each buffer a distinct priority and *rotating* the +priorities after a frame transmission is completed. + +In addition to priority rotation, the SW must maintain head and tail +pointers into the FIFO formed by the TX buffers to be able to determine +which buffer should be used for next frame (``txb_head``) and which +should be the first completed one (``txb_tail``). The actual buffer +indices are (obviously) modulo 4 (number of TX buffers), but the +pointers must be at least one bit wider to be able to distinguish +between FIFO full and FIFO empty – in this situation, +:math:`txb\_head \equiv txb\_tail\ (\textrm{mod}\ 4)`. An example of how +the FIFO is maintained, together with priority rotation, is depicted in + +| + ++------+---+---+---+---+ +| TXB# | 0 | 1 | 2 | 3 | ++======+===+===+===+===+ +| Seq | A | B | C | | ++------+---+---+---+---+ +| Prio | 7 | 6 | 5 | 4 | ++------+---+---+---+---+ +| | | T | | H | ++------+---+---+---+---+ + +| + ++------+---+---+---+---+ +| TXB# | 0 | 1 | 2 | 3 | ++======+===+===+===+===+ +| Seq | | B | C | | ++------+---+---+---+---+ +| Prio | 4 | 7 | 6 | 5 | ++------+---+---+---+---+ +| | | T | | H | ++------+---+---+---+---+ + +| + ++------+---+---+---+---+----+ +| TXB# | 0 | 1 | 2 | 3 | 0’ | ++======+===+===+===+===+====+ +| Seq | E | B | C | D | | ++------+---+---+---+---+----+ +| Prio | 4 | 7 | 6 | 5 | | ++------+---+---+---+---+----+ +| | | T | | | H | ++------+---+---+---+---+----+ + +| + +.. kernel-figure:: fsm_txt_buffer_user.svg + + TX Buffer states with possible transitions + +.. _subsec:ctucanfd:txtimestamp: + +Timestamping TX frames +^^^^^^^^^^^^^^^^^^^^^^ + +When submitting a frame to a TX buffer, one may specify the timestamp at +which the frame should be transmitted. The frame transmission may start +later, but not sooner. Note that the timestamp does not participate in +buffer prioritization – that is decided solely by the mechanism +described above. + +Support for time-based packet transmission was recently merged to Linux +v4.19 `Time-based packet transmission <https://lwn.net/Articles/748879/>`_, +but it remains yet to be researched +whether this functionality will be practical for CAN. + +Also similarly to retrieving the timestamp of RX frames, the core +supports retrieving the timestamp of TX frames – that is the time when +the frame was successfully delivered. The particulars are very similar +to timestamping RX frames and are described in . + +Handling RX buffer overrun +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When a received frame does no more fit into the hardware RX FIFO in its +entirety, RX FIFO overrun flag (STATUS[DOR]) is set and Data Overrun +Interrupt (DOI) is triggered. When servicing the interrupt, care must be +taken first to clear the DOR flag (via COMMAND[CDO]) and after that +clear the DOI interrupt flag. Otherwise, the interrupt would be +immediately [7]_ rearmed. + +**Note**: During development, it was discussed whether the internal HW +pipelining cannot disrupt this clear sequence and whether an additional +dummy cycle is necessary between clearing the flag and the interrupt. On +the Avalon interface, it indeed proved to be the case, but APB being +safe because it uses 2-cycle transactions. Essentially, the DOR flag +would be cleared, but DOI register’s Preset input would still be high +the cycle when the DOI clear request would also be applied (by setting +the register’s Reset input high). As Set had higher priority than Reset, +the DOI flag would not be reset. This has been already fixed by swapping +the Set/Reset priority (see issue #187). + +Reporting Error Passive and Bus Off conditions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It may be desirable to report when the node reaches *Error Passive*, +*Error Warning*, and *Bus Off* conditions. The driver is notified about +error state change by an interrupt (EPI, EWLI), and then proceeds to +determine the core’s error state by reading its error counters. + +There is, however, a slight race condition here – there is a delay +between the time when the state transition occurs (and the interrupt is +triggered) and when the error counters are read. When EPI is received, +the node may be either *Error Passive* or *Bus Off*. If the node goes +*Bus Off*, it obviously remains in the state until it is reset. +Otherwise, the node is *or was* *Error Passive*. However, it may happen +that the read state is *Error Warning* or even *Error Active*. It may be +unclear whether and what exactly to report in that case, but I +personally entertain the idea that the past error condition should still +be reported. Similarly, when EWLI is received but the state is later +detected to be *Error Passive*, *Error Passive* should be reported. + + +CTU CAN FD Driver Sources Reference +----------------------------------- + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd.h + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_base.c + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_pci.c + :internal: + +.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_platform.c + :internal: + +CTU CAN FD IP Core and Driver Development Acknowledgment +--------------------------------------------------------- + +* Odrej Ille <ondrej.ille@gmail.com> + + * started the project as student at Department of Measurement, FEE, CTU + * invested great amount of personal time and enthusiasm to the project over years + * worked on more funded tasks + +* `Department of Measurement <https://meas.fel.cvut.cz/>`_, + `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_, + `Czech Technical University <https://www.cvut.cz/en>`_ + + * is the main investor into the project over many years + * uses project in their CAN/CAN FD diagnostics framework for `Skoda Auto <https://www.skoda-auto.cz/>`_ + +* `Digiteq Automotive <https://www.digiteqautomotive.com/en>`_ + + * funding of the project CAN FD Open Cores Support Linux Kernel Based Systems + * negotiated and paid CTU to allow public access to the project + * provided additional funding of the work + +* `Department of Control Engineering <https://control.fel.cvut.cz/en>`_, + `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_, + `Czech Technical University <https://www.cvut.cz/en>`_ + + * solving the project CAN FD Open Cores Support Linux Kernel Based Systems + * providing GitLab management + * virtual servers and computational power for continuous integration + * providing hardware for HIL continuous integration tests + +* `PiKRON Ltd. <http://pikron.com/>`_ + + * minor funding to initiate preparation of the project open-sourcing + +* Petr Porazil <porazil@pikron.com> + + * design of PCIe transceiver addon board and assembly of boards + * design and assembly of MZ_APO baseboard for MicroZed/Zynq based system + +* Martin Jerabek <martin.jerabek01@gmail.com> + + * Linux driver development + * continuous integration platform architect and GHDL updates + * theses `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_ + +* Jiri Novak <jnovak@fel.cvut.cz> + + * project initiation, management and use at Department of Measurement, FEE, CTU + +* Pavel Pisa <pisa@cmp.felk.cvut.cz> + + * initiate open-sourcing, project coordination, management at Department of Control Engineering, FEE, CTU + +* Jaroslav Beran<jara.beran@gmail.com> + + * system integration for Intel SoC, core and driver testing and updates + +* Carsten Emde (`OSADL <https://www.osadl.org/>`_) + + * provided OSADL expertise to discuss IP core licensing + * pointed to possible deadlock for LGPL and CAN bus possible patent case which lead to relicense IP core design to BSD like license + +* Reiner Zitzmann and Holger Zeltwanger (`CAN in Automation <https://www.can-cia.org/>`_) + + * provided suggestions and help to inform community about the project and invited us to events focused on CAN bus future development directions + +* Jan Charvat + + * implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst <https://www.qemu.org/docs/master/system/devices/can.html>`_) + * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator + +Notes +----- + + +.. [1] + Other buses have their own specific driver interface to set up the + device. + +.. [2] + Not to be mistaken with CAN Error Frame. This is a ``can_frame`` with + ``CAN_ERR_FLAG`` set and some error info in its ``data`` field. + +.. [3] + Available in CTU CAN FD repository + `<https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_ + +.. [4] + As is done in the low-level driver functions + ``ctucan_hw_set_nom_bittiming`` and + ``ctucan_hw_set_data_bittiming``. + +.. [5] + At the time of writing this thesis, option 1 is still being used and + the modification is queued in gitlab issue #222 + +.. [6] + Strictly speaking, multiple CAN TX queues are supported since v4.19 + `can: enable multi-queue for SocketCAN devices <https://lore.kernel.org/patchwork/patch/913526/>`_ but no mainline driver is using + them yet. + +.. [7] + Or rather in the next clock cycle diff --git a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg new file mode 100644 index 000000000000..b371650788f4 --- /dev/null +++ b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg @@ -0,0 +1,151 @@ +<?xml version="1.0" encoding="UTF-8"?> +<svg width="113.611mm" height="86.6873mm" version="1.1" viewBox="0 0 113.611 86.6873" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"> + <defs> + <marker id="marker3667" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3517" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3373" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3199" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker3037" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2779" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2477" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker2074" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker1964" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="marker1856" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <marker id="Arrow2Mend" overflow="visible" orient="auto"> + <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <filter id="filter1204" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <marker id="marker2074-3" overflow="visible" orient="auto"> + <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/> + </marker> + <filter id="filter1204-6" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-4" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1-3" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + <filter id="filter1204-6-2-9-1-3-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB"> + <feGaussianBlur stdDeviation="0.00018829868"/> + </filter> + </defs> + <metadata> + <rdf:RDF> + <cc:Work rdf:about=""> + <dc:format>image/svg+xml</dc:format> + <dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/> + <dc:title/> + </cc:Work> + </rdf:RDF> + </metadata> + <g transform="translate(-49.0277 -104.823)"> + <g> + <path d="m130.534 165.429h-71.1816v-17.5315" fill="none" marker-end="url(#marker2477)" stroke="#28a4ff" stroke-width=".6"/> + <path d="m145.034 122.959v-11.5914h-43.1215" fill="none" marker-end="url(#marker3037)" stroke="#28a4ff" stroke-width=".6"/> + <rect x="130.679" y="122.933" width="28.2965" height="45.2319" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".499999"/> + <path d="m102.044 116.236h23.3126l-0.13388 18.8185h19.9383v3.66603" fill="none" marker-end="url(#marker3199)" stroke="#28a4ff" stroke-width=".6"/> + <path d="m59.5006 138.391v-24.2517h20.6338" fill="none" marker-end="url(#marker2779)" stroke="#28a4ff" stroke-width=".6"/> + <rect x="78.1389" y="126.411" width="28.0037" height="35.0443" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".5"/> + </g> + <g fill="#ffcb35" stroke="#000" stroke-linecap="square"> + <ellipse cx="92.1408" cy="114.239" rx="10.8866" ry="4.39308" stroke-width=".5"/> + <ellipse cx="92.1408" cy="134.185" rx="10.8866" ry="4.39308" stroke-width=".499999"/> + <ellipse cx="92.1408" cy="152.199" rx="10.8866" ry="4.39308" stroke-width=".499999"/> + </g> + <g fill="#28a4ff" stroke="#000" stroke-linecap="square" stroke-width=".499999"> + <ellipse cx="144.827" cy="143.316" rx="10.8866" ry="4.39308"/> + <ellipse cx="144.827" cy="159.143" rx="10.8866" ry="4.39308"/> + <ellipse cx="59.4364" cy="142.823" rx="7.36455" ry="4.39308"/> + <ellipse cx="144.827" cy="129.196" rx="10.8866" ry="4.39308"/> + <ellipse cx="143.077" cy="180.53" rx="10.8866" ry="4.39308"/> + </g> + <ellipse cx="110.386" cy="180.53" rx="10.8866" ry="4.39308" fill="#ffcb35" stroke="#000" stroke-linecap="square" stroke-width=".499999"/> + <text x="110.90907" y="179.42688" font-size="3.175px" xml:space="preserve"><tspan x="110.90907" y="179.42688" dy="0.60000002" text-align="center" text-anchor="middle">Accessible</tspan><tspan x="110.90907" y="183.39563"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text> + <text x="143.5869" y="179.52795" xml:space="preserve"><tspan x="143.5869" y="179.52795" dy="1 0 0 0 0 0" font-family="sans-serif" font-size="2.82222px" text-align="center" text-anchor="middle" style="font-variant-caps:normal;font-variant-east-asian:normal;font-variant-ligatures:normal;font-variant-numeric:normal">Inaccessible</tspan><tspan x="143.5869" y="183.36786" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text> + <g font-size="3.175px"> + <text x="91.95018" y="115.29005" xml:space="preserve"><tspan x="91.95018" y="115.29005" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Ready</tspan></tspan></text> + <text x="145.25127" y="130.49019" xml:space="preserve"><tspan x="145.25127" y="130.49019" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX OK</tspan></tspan></text> + <text x="145.31845" y="144.43121" xml:space="preserve"><tspan x="145.31845" y="144.43121" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Aborted</tspan></tspan></text> + <text x="145.40399" y="160.36035" xml:space="preserve"><tspan x="145.40399" y="160.36035" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX failed</tspan></tspan></text> + <text x="91.823967" y="133.53941" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.823967" y="133.53941" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX in</tspan></tspan><tspan x="91.823967" y="136.39691" text-align="center">progress</tspan></text> + <text x="91.648918" y="151.84813" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.648918" y="151.84813" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Abort in</tspan></tspan><tspan x="91.648918" y="154.70563" text-align="center">progress</tspan></text> + <text x="59.456043" y="143.91658" xml:space="preserve"><tspan x="59.456043" y="143.91658" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Empty</tspan></tspan></text> + </g> + <g fill="none"> + <g stroke="#000"> + <rect x="52.3943" y="171.63" width="106.581" height="16.601" rx="0" ry="0" stroke-linecap="square" stroke-width=".499999"/> + <g stroke-width=".6"> + <path d="m106.383 159.046h26.4967" marker-end="url(#Arrow2Mend)"/> + <path d="m103.138 152.268h41.5564v-3.92426" marker-end="url(#marker1856)"/> + <path d="m106.38 129.354h17.7785"/> + <path d="m125.818 129.359h7.2418" marker-end="url(#marker1964)"/> + </g> + <path d="m124.169 129.354a0.959514 0.97091 0 0 1 0.47587-0.84557 0.959514 0.97091 0 0 1 0.96164-3e-3 0.959514 0.97091 0 0 1 0.48149 0.84231" stroke-linecap="square" stroke-width=".600001"/> + <path d="m55.7026 180.832h34.8131" marker-end="url(#marker2074)" stroke-width=".6"/> + </g> + <g> + <path d="m55.6464 185.744h34.8131" marker-end="url(#marker2074-3)" stroke="#28a4ff" stroke-width=".600001"/> + <g stroke-width=".6"> + <path d="m94.0487 129.889v-10.6493" marker-end="url(#marker3373)" stroke="#000"/> + <path d="m89.7534 118.621v10.662" marker-end="url(#marker3517)" stroke="#000"/> + <path d="m92.119 138.812v7.9718" marker-end="url(#marker3667)" stroke="#28a4ff"/> + </g> + </g> + </g> + <text transform="matrix(.264583 0 0 .264583 91.8919 139.964)" x="26.959213" y="9.11724" fill="#2aa1ff" filter="url(#filter1204-6-2-9-1-3-1)" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="26.959213" y="9.11724" text-align="center">Set</tspan><tspan x="26.959213" y="22.31724" text-align="center">abort</tspan></text> + <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccesfull</tspan></text> + <g font-size="12px" stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 68.5988 118.913)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">starts</tspan></text> + <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">succesfull</tspan></text> + <text transform="matrix(.264583 0 0 .264583 107.77 145.476)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">sborted</tspan></text> + </g> + <g stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 107.574 155.948)" x="38.824219" y="9.1171875" filter="url(#filter1204)" font-size="10.6667px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Retransmit</tspan><tspan x="38.824219" y="20.850557" text-align="center">limit reached or</tspan><tspan x="38.824219" y="32.583927" text-align="center">node went bus off</tspan><tspan x="38.824219" y="44.317299" text-align="center"/></text> + <text transform="matrix(.264583 0 0 .264583 60.7127 177.384)" x="38.824539" y="9.1173134" filter="url(#filter1204-6)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824539" y="9.1173134" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Transmission result</tspan></text> + <text transform="matrix(.264583 0 0 .264583 45.6885 173.226)" x="57.727047" y="9.11724" filter="url(#filter1204-6-9)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Legend:</tspan></text> + </g> + <g fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-anchor="middle"> + <text transform="matrix(.264583 0 0 .264583 57.0045 182.079)" x="57.727047" y="9.11724" filter="url(#filter1204-6-2)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">SW command</tspan></text> + <text transform="matrix(.264583 0 0 .264583 57.7865 110.104)" x="40.822609" y="9.11724" filter="url(#filter1204-6-2-9)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="40.822609" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text> + <text transform="matrix(.264583 0 0 .264583 116.893 107.491)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-4)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text> + <text transform="matrix(.264583 0 0 .264583 87.5687 166.324)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-1)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set empty</tspan></text> + <text transform="matrix(.264583 0 0 .264583 106.53 113.074)" x="30.228771" y="8.9063139" filter="url(#filter1204-6-2-9-1-3)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="30.228771" y="8.9063139" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set abort</tspan></text> + </g> + </g> +</svg> diff --git a/Documentation/networking/device_drivers/can/index.rst b/Documentation/networking/device_drivers/can/index.rst index 58b6e0ad3030..0c3cc6633559 100644 --- a/Documentation/networking/device_drivers/can/index.rst +++ b/Documentation/networking/device_drivers/can/index.rst @@ -10,6 +10,7 @@ Contents: .. toctree:: :maxdepth: 2 + ctu/ctucanfd-driver freescale/flexcan .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst b/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst deleted file mode 100644 index e03e9c631879..000000000000 --- a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst +++ /dev/null @@ -1,189 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=================================== -DEC EtherWORKS Ethernet De4x5 cards -=================================== - - Originally, this driver was written for the Digital Equipment - Corporation series of EtherWORKS Ethernet cards: - - - DE425 TP/COAX EISA - - DE434 TP PCI - - DE435 TP/COAX/AUI PCI - - DE450 TP/COAX/AUI PCI - - DE500 10/100 PCI Fasternet - - but it will now attempt to support all cards which conform to the - Digital Semiconductor SROM Specification. The driver currently - recognises the following chips: - - - DC21040 (no SROM) - - DC21041[A] - - DC21140[A] - - DC21142 - - DC21143 - - So far the driver is known to work with the following cards: - - - KINGSTON - - Linksys - - ZNYX342 - - SMC8432 - - SMC9332 (w/new SROM) - - ZNYX31[45] - - ZNYX346 10/100 4 port (can act as a 10/100 bridge!) - - The driver has been tested on a relatively busy network using the DE425, - DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred - 16M of data to a DECstation 5000/200 as follows:: - - TCP UDP - TX RX TX RX - DE425 1030k 997k 1170k 1128k - DE434 1063k 995k 1170k 1125k - DE435 1063k 995k 1170k 1125k - DE500 1063k 998k 1170k 1125k in 10Mb/s mode - - All values are typical (in kBytes/sec) from a sample of 4 for each - measurement. Their error is +/-20k on a quiet (private) network and also - depend on what load the CPU has. - ----------------------------------------------------------------------------- - - The ability to load this driver as a loadable module has been included - and used extensively during the driver development (to save those long - reboot sequences). Loadable module support under PCI and EISA has been - achieved by letting the driver autoprobe as if it were compiled into the - kernel. Do make sure you're not sharing interrupts with anything that - cannot accommodate interrupt sharing! - - To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy de4x5.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) for fixed autoprobes (not recommended), edit the source code near - line 5594 to reflect the I/O address you're using, or assign these when - loading by:: - - insmod de4x5 io=0xghh where g = bus number - hh = device number - - .. note:: - - autoprobing for modules is now supported by default. You may just - use:: - - insmod de4x5 - - to load all available boards. For a specific board, still use - the 'io=?' above. - 3) compile de4x5.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the de4x5 configuration turned off and reboot. - 5) insmod de4x5 [io=0xghh] - 6) run the net startup bits for your new eth?? interface(s) manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - To unload a module, turn off the associated interface(s) - 'ifconfig eth?? down' then 'rmmod de4x5'. - - Automedia detection is included so that in principle you can disconnect - from, e.g. TP, reconnect to BNC and things will still work (after a - pause while the driver figures out where its media went). My tests - using ping showed that it appears to work.... - - By default, the driver will now autodetect any DECchip based card. - Should you have a need to restrict the driver to DIGITAL only cards, you - can compile with a DEC_ONLY define, or if loading as a module, use the - 'dec_only=1' parameter. - - I've changed the timing routines to use the kernel timer and scheduling - functions so that the hangs and other assorted problems that occurred - while autosensing the media should be gone. A bonus for the DC21040 - auto media sense algorithm is that it can now use one that is more in - line with the rest (the DC21040 chip doesn't have a hardware timer). - The downside is the 1 'jiffies' (10ms) resolution. - - IEEE 802.3u MII interface code has been added in anticipation that some - products may use it in the future. - - The SMC9332 card has a non-compliant SROM which needs fixing - I have - patched this driver to detect it because the SROM format used complies - to a previous DEC-STD format. - - I have removed the buffer copies needed for receive on Intels. I cannot - remove them for Alphas since the Tulip hardware only does longword - aligned DMA transfers and the Alphas get alignment traps with non - longword aligned data copies (which makes them really slow). No comment. - - I have added SROM decoding routines to make this driver work with any - card that supports the Digital Semiconductor SROM spec. This will help - all cards running the dc2114x series chips in particular. Cards using - the dc2104x chips should run correctly with the basic driver. I'm in - debt to <mjacob@feral.com> for the testing and feedback that helped get - this feature working. So far we have tested KINGSTON, SMC8432, SMC9332 - (with the latest SROM complying with the SROM spec V3: their first was - broken), ZNYX342 and LinkSys. ZNYX314 (dual 21041 MAC) and ZNYX 315 - (quad 21041 MAC) cards also appear to work despite their incorrectly - wired IRQs. - - I have added a temporary fix for interrupt problems when some SCSI cards - share the same interrupt as the DECchip based cards. The problem occurs - because the SCSI card wants to grab the interrupt as a fast interrupt - (runs the service routine with interrupts turned off) vs. this card - which really needs to run the service routine with interrupts turned on. - This driver will now add the interrupt service routine as a fast - interrupt if it is bounced from the slow interrupt. THIS IS NOT A - RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time - until people sort out their compatibility issues and the kernel - interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST - INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not - run on the same interrupt. PCMCIA/CardBus is another can of worms... - - Finally, I think I have really fixed the module loading problem with - more than one DECchip based card. As a side effect, I don't mess with - the device structure any more which means that if more than 1 card in - 2.0.x is installed (4 in 2.1.x), the user will have to edit - linux/drivers/net/Space.c to make room for them. Hence, module loading - is the preferred way to use this driver, since it doesn't have this - limitation. - - Where SROM media detection is used and full duplex is specified in the - SROM, the feature is ignored unless lp->params.fdx is set at compile - time OR during a module load (insmod de4x5 args='eth??:fdx' [see - below]). This is because there is no way to automatically detect full - duplex links except through autonegotiation. When I include the - autonegotiation feature in the SROM autoconf code, this detection will - occur automatically for that case. - - Command line arguments are now allowed, similar to passing arguments - through LILO. This will allow a per adapter board set up of full duplex - and media. The only lexical constraints are: the board name (dev->name) - appears in the list before its parameters. The list of parameters ends - either at the end of the parameter list or with another board name. The - following parameters are allowed: - - ========= =============================================== - fdx for full duplex - autosense to set the media/speed; with the following - sub-parameters: - TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO - ========= =============================================== - - Case sensitivity is important for the sub-parameters. They *must* be - upper case. Examples:: - - insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. - - For a compiled in driver, in linux/drivers/net/CONFIG, place e.g.:: - - DE4X5_OPTS = -DDE4X5_PARM='"eth0:fdx autosense=AUI eth2:autosense=TP"' - - Yes, I know full duplex isn't permissible on BNC or AUI; they're just - examples. By default, full duplex is turned off and AUTO is the default - autosense setting. In reality, I expect only the full duplex option to - be used. Note the use of single quotes in the two examples above and the - lack of commas to separate items. diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 6b5dc203da2b..4e06684d079b 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -19,7 +19,6 @@ Contents: cirrus/cs89x0 dlink/dl2k davicom/dm9000 - dec/de4x5 dec/dmfe freescale/dpaa freescale/dpaa2/index @@ -39,6 +38,7 @@ Contents: intel/iavf intel/ice marvell/octeontx2 + marvell/octeon_ep mellanox/mlx5 microsoft/netvsc neterion/s2io diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst new file mode 100644 index 000000000000..bc562c49011b --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +==================================================================== +Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC +==================================================================== + +Network driver for Marvell's Octeon PCI EndPoint NIC. +Copyright (c) 2020 Marvell International Ltd. + +Contents +======== + +- `Overview`_ +- `Supported Devices`_ +- `Interface Control`_ + +Overview +======== +This driver implements networking functionality of Marvell's Octeon PCI +EndPoint NIC. + +Supported Devices +================= +Currently, this driver support following devices: + * Network controller: Cavium, Inc. Device b200 + +Interface Control +================= +Network Interface control like changing mtu, link speed, link down/up are +done by writing command to mailbox command queue, a mailbox interface +implemented through a reserved region in BAR4. +This driver writes the commands into the mailbox and the firmware on the +Octeon device processes them. The firmware also sends unsolicited notifications +to driver for events suchs as link change, through notification queue +implemented as part of mailbox interface. diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 5f5cfdb2a300..601eacaf12f3 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -17,7 +17,6 @@ Contents: fddi/index hamradio/index qlogic/index - wan/index wifi/index wwan/index diff --git a/Documentation/networking/device_drivers/wan/index.rst b/Documentation/networking/device_drivers/wan/index.rst deleted file mode 100644 index 9d9ae94f00b4..000000000000 --- a/Documentation/networking/device_drivers/wan/index.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - -Classic WAN Device Drivers -========================== - -Contents: - -.. toctree:: - :maxdepth: 2 - - z8530book - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/networking/device_drivers/wan/z8530book.rst b/Documentation/networking/device_drivers/wan/z8530book.rst deleted file mode 100644 index fea2c40e7973..000000000000 --- a/Documentation/networking/device_drivers/wan/z8530book.rst +++ /dev/null @@ -1,256 +0,0 @@ -======================= -Z8530 Programming Guide -======================= - -:Author: Alan Cox - -Introduction -============ - -The Z85x30 family synchronous/asynchronous controller chips are used on -a large number of cheap network interface cards. The kernel provides a -core interface layer that is designed to make it easy to provide WAN -services using this chip. - -The current driver only support synchronous operation. Merging the -asynchronous driver support into this code to allow any Z85x30 device to -be used as both a tty interface and as a synchronous controller is a -project for Linux post the 2.4 release - -Driver Modes -============ - -The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices in -three different modes. Each mode can be applied to an individual channel -on the chip (each chip has two channels). - -The PIO synchronous mode supports the most common Z8530 wiring. Here the -chip is interface to the I/O and interrupt facilities of the host -machine but not to the DMA subsystem. When running PIO the Z8530 has -extremely tight timing requirements. Doing high speeds, even with a -Z85230 will be tricky. Typically you should expect to achieve at best -9600 baud with a Z8C530 and 64Kbits with a Z85230. - -The DMA mode supports the chip when it is configured to use dual DMA -channels on an ISA bus. The better cards tend to support this mode of -operation for a single channel. With DMA running the Z85230 tops out -when it starts to hit ISA DMA constraints at about 512Kbits. It is worth -noting here that many PC machines hang or crash when the chip is driven -fast enough to hold the ISA bus solid. - -Transmit DMA mode uses a single DMA channel. The DMA channel is used for -transmission as the transmit FIFO is smaller than the receive FIFO. it -gives better performance than pure PIO mode but is nowhere near as ideal -as pure DMA mode. - -Using the Z85230 driver -======================= - -The Z85230 driver provides the back end interface to your board. To -configure a Z8530 interface you need to detect the board and to identify -its ports and interrupt resources. It is also your problem to verify the -resources are available. - -Having identified the chip you need to fill in a struct z8530_dev, -which describes each chip. This object must exist until you finally -shutdown the board. Firstly zero the active field. This ensures nothing -goes off without you intending it. The irq field should be set to the -interrupt number of the chip. (Each chip has a single interrupt source -rather than each channel). You are responsible for allocating the -interrupt line. The interrupt handler should be set to -:c:func:`z8530_interrupt()`. The device id should be set to the -z8530_dev structure pointer. Whether the interrupt can be shared or not -is board dependent, and up to you to initialise. - -The structure holds two channel structures. Initialise chanA.ctrlio and -chanA.dataio with the address of the control and data ports. You can or -this with Z8530_PORT_SLEEP to indicate your interface needs the 5uS -delay for chip settling done in software. The PORT_SLEEP option is -architecture specific. Other flags may become available on future -platforms, eg for MMIO. Initialise the chanA.irqs to &z8530_nop to -start the chip up as disabled and discarding interrupt events. This -ensures that stray interrupts will be mopped up and not hang the bus. -Set chanA.dev to point to the device structure itself. The private and -name field you may use as you wish. The private field is unused by the -Z85230 layer. The name is used for error reporting and it may thus make -sense to make it match the network name. - -Repeat the same operation with the B channel if your chip has both -channels wired to something useful. This isn't always the case. If it is -not wired then the I/O values do not matter, but you must initialise -chanB.dev. - -If your board has DMA facilities then initialise the txdma and rxdma -fields for the relevant channels. You must also allocate the ISA DMA -channels and do any necessary board level initialisation to configure -them. The low level driver will do the Z8530 and DMA controller -programming but not board specific magic. - -Having initialised the device you can then call -:c:func:`z8530_init()`. This will probe the chip and reset it into -a known state. An identification sequence is then run to identify the -chip type. If the checks fail to pass the function returns a non zero -error code. Typically this indicates that the port given is not valid. -After this call the type field of the z8530_dev structure is -initialised to either Z8530, Z85C30 or Z85230 according to the chip -found. - -Once you have called z8530_init you can also make use of the utility -function :c:func:`z8530_describe()`. This provides a consistent -reporting format for the Z8530 devices, and allows all the drivers to -provide consistent reporting. - -Attaching Network Interfaces -============================ - -If you wish to use the network interface facilities of the driver, then -you need to attach a network device to each channel that is present and -in use. In addition to use the generic HDLC you need to follow some -additional plumbing rules. They may seem complex but a look at the -example hostess_sv11 driver should reassure you. - -The network device used for each channel should be pointed to by the -netdevice field of each channel. The hdlc-> priv field of the network -device points to your private data - you will need to be able to find -your private data from this. - -The way most drivers approach this particular problem is to create a -structure holding the Z8530 device definition and put that into the -private field of the network device. The network device fields of the -channels then point back to the network devices. - -If you wish to use the generic HDLC then you need to register the HDLC -device. - -Before you register your network device you will also need to provide -suitable handlers for most of the network device callbacks. See the -network device documentation for more details on this. - -Configuring And Activating The Port -=================================== - -The Z85230 driver provides helper functions and tables to load the port -registers on the Z8530 chips. When programming the register settings for -a channel be aware that the documentation recommends initialisation -orders. Strange things happen when these are not followed. - -:c:func:`z8530_channel_load()` takes an array of pairs of -initialisation values in an array of u8 type. The first value is the -Z8530 register number. Add 16 to indicate the alternate register bank on -the later chips. The array is terminated by a 255. - -The driver provides a pair of public tables. The z8530_hdlc_kilostream -table is for the UK 'Kilostream' service and also happens to cover most -other end host configurations. The z8530_hdlc_kilostream_85230 table -is the same configuration using the enhancements of the 85230 chip. The -configuration loaded is standard NRZ encoded synchronous data with HDLC -bitstuffing. All of the timing is taken from the other end of the link. - -When writing your own tables be aware that the driver internally tracks -register values. It may need to reload values. You should therefore be -sure to set registers 1-7, 9-11, 14 and 15 in all configurations. Where -the register settings depend on DMA selection the driver will update the -bits itself when you open or close. Loading a new table with the -interface open is not recommended. - -There are three standard configurations supported by the core code. In -PIO mode the interface is programmed up to use interrupt driven PIO. -This places high demands on the host processor to avoid latency. The -driver is written to take account of latency issues but it cannot avoid -latencies caused by other drivers, notably IDE in PIO mode. Because the -drivers allocate buffers you must also prevent MTU changes while the -port is open. - -Once the port is open it will call the rx_function of each channel -whenever a completed packet arrived. This is invoked from interrupt -context and passes you the channel and a network buffer (struct -sk_buff) holding the data. The data includes the CRC bytes so most -users will want to trim the last two bytes before processing the data. -This function is very timing critical. When you wish to simply discard -data the support code provides the function -:c:func:`z8530_null_rx()` to discard the data. - -To active PIO mode sending and receiving the ``z8530_sync_open`` is called. -This expects to be passed the network device and the channel. Typically -this is called from your network device open callback. On a failure a -non zero error status is returned. -The :c:func:`z8530_sync_close()` function shuts down a PIO -channel. This must be done before the channel is opened again and before -the driver shuts down and unloads. - -The ideal mode of operation is dual channel DMA mode. Here the kernel -driver will configure the board for DMA in both directions. The driver -also handles ISA DMA issues such as controller programming and the -memory range limit for you. This mode is activated by calling the -:c:func:`z8530_sync_dma_open()` function. On failure a non zero -error value is returned. Once this mode is activated it can be shut down -by calling the :c:func:`z8530_sync_dma_close()`. You must call -the close function matching the open mode you used. - -The final supported mode uses a single DMA channel to drive the transmit -side. As the Z85C30 has a larger FIFO on the receive channel this tends -to increase the maximum speed a little. This is activated by calling the -``z8530_sync_txdma_open``. This returns a non zero error code on failure. The -:c:func:`z8530_sync_txdma_close()` function closes down the Z8530 -interface from this mode. - -Network Layer Functions -======================= - -The Z8530 layer provides functions to queue packets for transmission. -The driver internally buffers the frame currently being transmitted and -one further frame (in order to keep back to back transmission running). -Any further buffering is up to the caller. - -The function :c:func:`z8530_queue_xmit()` takes a network buffer -in sk_buff format and queues it for transmission. The caller must -provide the entire packet with the exception of the bitstuffing and CRC. -This is normally done by the caller via the generic HDLC interface -layer. It returns 0 if the buffer has been queued and non zero values -for queue full. If the function accepts the buffer it becomes property -of the Z8530 layer and the caller should not free it. - -The function :c:func:`z8530_get_stats()` returns a pointer to an -internally maintained per interface statistics block. This provides most -of the interface code needed to implement the network layer get_stats -callback. - -Porting The Z8530 Driver -======================== - -The Z8530 driver is written to be portable. In DMA mode it makes -assumptions about the use of ISA DMA. These are probably warranted in -most cases as the Z85230 in particular was designed to glue to PC type -machines. The PIO mode makes no real assumptions. - -Should you need to retarget the Z8530 driver to another architecture the -only code that should need changing are the port I/O functions. At the -moment these assume PC I/O port accesses. This may not be appropriate -for all platforms. Replacing :c:func:`z8530_read_port()` and -``z8530_write_port`` is intended to be all that is required to port -this driver layer. - -Known Bugs And Assumptions -========================== - -Interrupt Locking - The locking in the driver is done via the global cli/sti lock. This - makes for relatively poor SMP performance. Switching this to use a - per device spin lock would probably materially improve performance. - -Occasional Failures - We have reports of occasional failures when run for very long - periods of time and the driver starts to receive junk frames. At the - moment the cause of this is not clear. - -Public Functions Provided -========================= - -.. kernel-doc:: drivers/net/wan/z85230.c - :export: - -Internal Functions -================== - -.. kernel-doc:: drivers/net/wan/z85230.c - :internal: diff --git a/Documentation/networking/device_drivers/wwan/index.rst b/Documentation/networking/device_drivers/wwan/index.rst index 1cb8c7371401..370d8264d5dc 100644 --- a/Documentation/networking/device_drivers/wwan/index.rst +++ b/Documentation/networking/device_drivers/wwan/index.rst @@ -9,6 +9,7 @@ Contents: :maxdepth: 2 iosm + t7xx .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/wwan/t7xx.rst b/Documentation/networking/device_drivers/wwan/t7xx.rst new file mode 100644 index 000000000000..dd5b731957ca --- /dev/null +++ b/Documentation/networking/device_drivers/wwan/t7xx.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +.. Copyright (C) 2020-21 Intel Corporation + +.. _t7xx_driver_doc: + +============================================ +t7xx driver for MTK PCIe based T700 5G modem +============================================ +The t7xx driver is a WWAN PCIe host driver developed for linux or Chrome OS platforms +for data exchange over PCIe interface between Host platform & MediaTek's T700 5G modem. +The driver exposes an interface conforming to the MBIM protocol [1]. Any front end +application (e.g. Modem Manager) could easily manage the MBIM interface to enable +data communication towards WWAN. The driver also provides an interface to interact +with the MediaTek's modem via AT commands. + +Basic usage +=========== +MBIM & AT functions are inactive when unmanaged. The t7xx driver provides +WWAN port userspace interfaces representing MBIM & AT control channels and does +not play any role in managing their functionality. It is the job of a userspace +application to detect port enumeration and enable MBIM & AT functionalities. + +Examples of few such userspace applications are: + +- mbimcli (included with the libmbim [2] library), and +- Modem Manager [3] + +Management Applications to carry out below required actions for establishing +MBIM IP session: + +- open the MBIM control channel +- configure network connection settings +- connect to network +- configure IP network interface + +Management Applications to carry out below required actions for send an AT +command and receive response: + +- open the AT control channel using a UART tool or a special user tool + +Management application development +================================== +The driver and userspace interfaces are described below. The MBIM protocol is +described in [1] Mobile Broadband Interface Model v1.0 Errata-1. + +MBIM control channel userspace ABI +---------------------------------- + +/dev/wwan0mbim0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes an MBIM interface to the MBIM function by implementing +MBIM WWAN Port. The userspace end of the control channel pipe is a +/dev/wwan0mbim0 character device. Application shall use this interface for +MBIM protocol communication. + +Fragmentation +~~~~~~~~~~~~~ +The userspace application is responsible for all control message fragmentation +and defragmentation as per MBIM specification. + +/dev/wwan0mbim0 write() +~~~~~~~~~~~~~~~~~~~~~~~ +The MBIM control messages from the management application must not exceed the +negotiated control message size. + +/dev/wwan0mbim0 read() +~~~~~~~~~~~~~~~~~~~~~~ +The management application must accept control messages of up the negotiated +control message size. + +MBIM data channel userspace ABI +------------------------------- + +wwan0-X network device +~~~~~~~~~~~~~~~~~~~~~~ +The t7xx driver exposes IP link interface "wwan0-X" of type "wwan" for IP +traffic. Iproute network utility is used for creating "wwan0-X" network +interface and for associating it with MBIM IP session. + +The userspace management application is responsible for creating new IP link +prior to establishing MBIM IP session where the SessionId is greater than 0. + +For example, creating new IP link for a MBIM IP session with SessionId 1: + + ip link add dev wwan0-1 parentdev wwan0 type wwan linkid 1 + +The driver will automatically map the "wwan0-1" network device to MBIM IP +session 1. + +AT port userspace ABI +---------------------------------- + +/dev/wwan0at0 character device +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver exposes an AT port by implementing AT WWAN Port. +The userspace end of the control port is a /dev/wwan0at0 character +device. Application shall use this interface to issue AT commands. + +The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification. + +References +========== +[1] *MBIM (Mobile Broadband Interface Model) Errata-1* + +- https://www.usb.org/document-library/ + +[2] *libmbim "a glib-based library for talking to WWAN modems and devices which +speak the Mobile Interface Broadband Model (MBIM) protocol"* + +- http://www.freedesktop.org/wiki/Software/libmbim/ + +[3] *Modem Manager "a DBus-activated daemon which controls mobile broadband +(2G/3G/4G/5G) devices and connections"* + +- http://www.freedesktop.org/wiki/Software/ModemManager/ + +[4] *Specification # 27.007 - 3GPP* + +- https://www.3gpp.org/DynaReport/27007.htm diff --git a/Documentation/networking/devlink/devlink-linecard.rst b/Documentation/networking/devlink/devlink-linecard.rst new file mode 100644 index 000000000000..6c0b8928bc13 --- /dev/null +++ b/Documentation/networking/devlink/devlink-linecard.rst @@ -0,0 +1,122 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +Devlink Line card +================= + +Background +========== + +The ``devlink-linecard`` mechanism is targeted for manipulation of +line cards that serve as a detachable PHY modules for modular switch +system. Following operations are provided: + + * Get a list of supported line card types. + * Provision of a slot with specific line card type. + * Get and monitor of line card state and its change. + +Line card according to the type may contain one or more gearboxes +to mux the lanes with certain speed to multiple ports with lanes +of different speed. Line card ensures N:M mapping between +the switch ASIC modules and physical front panel ports. + +Overview +======== + +Each line card devlink object is created by device driver, +according to the physical line card slots available on the device. + +Similar to splitter cable, where the device might have no way +of detection of the splitter cable geometry, the device +might not have a way to detect line card type. For that devices, +concept of provisioning is introduced. It allows the user to: + + * Provision a line card slot with certain line card type + + - Device driver would instruct the ASIC to prepare all + resources accordingly. The device driver would + create all instances, namely devlink port and netdevices + that reside on the line card, according to the line card type + * Manipulate of line card entities even without line card + being physically connected or powered-up + * Setup splitter cable on line card ports + + - As on the ordinary ports, user may provision a splitter + cable of a certain type, without the need to + be physically connected to the port + * Configure devlink ports and netdevices + +Netdevice carrier is decided as follows: + + * Line card is not inserted or powered-down + + - The carrier is always down + * Line card is inserted and powered up + + - The carrier is decided as for ordinary port netdevice + +Line card state +=============== + +The ``devlink-linecard`` mechanism supports the following line card states: + + * ``unprovisioned``: Line card is not provisioned on the slot. + * ``unprovisioning``: Line card slot is currently being unprovisioned. + * ``provisioning``: Line card slot is currently in a process of being provisioned + with a line card type. + * ``provisioning_failed``: Provisioning was not successful. + * ``provisioned``: Line card slot is provisioned with a type. + * ``active``: Line card is powered-up and active. + +The following diagram provides a general overview of ``devlink-linecard`` +state transitions:: + + +-------------------------+ + | | + +----------------------------------> unprovisioned | + | | | + | +--------|-------^--------+ + | | | + | | | + | +--------v-------|--------+ + | | | + | | provisioning | + | | | + | +------------|------------+ + | | + | +-----------------------------+ + | | | + | +------------v------------+ +------------v------------+ +-------------------------+ + | | | | ----> | + +----- provisioning_failed | | provisioned | | active | + | | | | <---- | + | +------------^------------+ +------------|------------+ +-------------------------+ + | | | + | | | + | | +------------v------------+ + | | | | + | | | unprovisioning | + | | | | + | | +------------|------------+ + | | | + | +-----------------------------+ + | | + +-----------------------------------------------+ + + +Example usage +============= + +.. code:: shell + + $ devlink lc show [ DEV [ lc LC_INDEX ] ] + $ devlink lc set DEV lc LC_INDEX [ { type LC_TYPE | notype } ] + + # Show current line card configuration and status for all slots: + $ devlink lc + + # Set slot 8 to be provisioned with type "16x100G": + $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G + + # Set slot 8 to be unprovisioned: + $ devlink lc set pci/0000:01:00.0 lc 8 notype diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index c17cdb079611..850715512293 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -39,6 +39,7 @@ general. devlink-resource devlink-reload devlink-trap + devlink-linecard Driver-specific documentation ----------------------------- diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index ddc1dd039337..ed7fa76e7a40 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -193,6 +193,23 @@ protocol. If not all packets are of equal size, the tagger can implement the default behavior by specifying the correct offset incurred by each individual RX packet. Tail taggers do not cause issues to the flow dissector. +Checksum offload should work with category 1 and 2 taggers when the DSA master +driver declares NETIF_F_HW_CSUM in vlan_features and looks at csum_start and +csum_offset. For those cases, DSA will shift the checksum start and offset by +the tag size. If the DSA master driver still uses the legacy NETIF_F_IP_CSUM +or NETIF_F_IPV6_CSUM in vlan_features, the offload might only work if the +offload hardware already expects that specific tag (perhaps due to matching +vendors). DSA slaves inherit those flags from the master port, and it is up to +the driver to correctly fall back to software checksum when the IP header is not +where the hardware expects. If that check is ineffective, the packets might go +to the network without a proper checksum (the checksum field will have the +pseudo IP header sum). For category 3, when the offload hardware does not +already expect the switch tag in use, the checksum must be calculated before any +tag is inserted (i.e. inside the tagger). Otherwise, the DSA master would +include the tail tag in the (software or hardware) checksum calculation. Then, +when the tag gets stripped by the switch during transmission, it will leave an +incorrect IP checksum in place. + Due to various reasons (most common being category 1 taggers being associated with DSA-unaware masters, mangling what the master perceives as MAC DA), the tagging protocol may require the DSA master to operate in promiscuous mode, to diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 24d9be69065d..dbca3e9ec782 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -862,6 +862,7 @@ Kernel response contents: ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode ==================================== ====== =========================== ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with @@ -871,6 +872,12 @@ separate buffers. The device configuration must make it possible to receive full memory pages of data, for example because MTU is high enough or through HW-GRO. +``ETHTOOL_A_RINGS_TX_PUSH`` flag is used to enable descriptor fast +path to send packets. In ordinary path, driver fills descriptors in DRAM and +notifies NIC hardware. In fast path, driver pushes descriptors to the device +through MMIO writes, thus reducing the latency. However, enabling this feature +may increase the CPU cost. Drivers may enforce additional per-packet +eligibility checks (e.g. on packet size). RINGS_SET ========= @@ -887,6 +894,7 @@ Request contents: ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE + ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode ==================================== ====== =========================== Kernel checks that requested ring sizes do not exceed limits reported by diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 72cf33579b78..03b215bddde8 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -1,5 +1,5 @@ -Linux Networking Documentation -============================== +Networking +========== Refer to :ref:`netdev-FAQ` for a guide on netdev development process specifics. @@ -97,6 +97,7 @@ Contents: sctp secid seg6-sysctl + skbuff smc-sysctl statistics strparser diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 66828293d9cb..b882d4238581 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -2474,6 +2474,33 @@ drop_unsolicited_na - BOOLEAN By default this is turned off. +accept_unsolicited_na - BOOLEAN + Add a new neighbour cache entry in STALE state for routers on receiving an + unsolicited neighbour advertisement with target link-layer address option + specified. This is as per router-side behavior documented in RFC9131. + This has lower precedence than drop_unsolicited_na. + + ==== ====== ====== ============================================== + drop accept fwding behaviour + ---- ------ ------ ---------------------------------------------- + 1 X X Drop NA packet and don't pass up the stack + 0 0 X Pass NA packet up the stack, don't update NC + 0 1 0 Pass NA packet up the stack, don't update NC + 0 1 1 Pass NA packet up the stack, and add a STALE + NC entry + ==== ====== ====== ============================================== + + This will optimize the return path for the initial off-link communication + that is initiated by a directly connected host, by ensuring that + the first-hop router which turns on this setting doesn't have to + buffer the initial return packets to do neighbour-solicitation. + The prerequisite is that the host is configured to send + unsolicited neighbour advertisements on interface bringup. + This setting should be used in conjunction with the ndisc_notify setting + on the host to satisfy this prerequisite. + + By default this is turned off. + enhanced_dad - BOOLEAN Include a nonce option in the IPv6 neighbor solicitation messages used for duplicate address detection per RFC7527. A received DAD NS will only signal diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index b0d4da71e68e..e263dfcc4b40 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -46,6 +46,24 @@ allow_join_initial_addr_port - BOOLEAN Default: 1 +pm_type - INTEGER + + Set the default path manager type to use for each new MPTCP + socket. In-kernel path management will control subflow + connections and address advertisements according to + per-namespace values configured over the MPTCP netlink + API. Userspace path management puts per-MPTCP-connection subflow + connection decisions and address advertisements under control of + a privileged userspace program, at the cost of more netlink + traffic to propagate all of the related events and commands. + + This is a per-namespace sysctl. + + * 0 - In-kernel path manager + * 1 - Userspace path manager + + Default: 0 + stale_loss_cnt - INTEGER The number of MPTCP-level retransmission intervals with no traffic and pending outstanding data on a given subflow required to declare it stale. diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 311128abb768..834945ebc4cd 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -34,10 +34,13 @@ nf_conntrack_count - INTEGER (read-only) nf_conntrack_events - BOOLEAN - 0 - disabled - - not 0 - enabled (default) + - 1 - enabled + - 2 - auto (default) If this option is enabled, the connection tracking code will provide userspace with connection tracking events via ctnetlink. + The default allocates the extension if a userspace program is + listening to ctnetlink events. nf_conntrack_expect_max - INTEGER Maximum size of expectation table. Default value is diff --git a/Documentation/networking/skbuff.rst b/Documentation/networking/skbuff.rst new file mode 100644 index 000000000000..5b74275a73a3 --- /dev/null +++ b/Documentation/networking/skbuff.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 + +struct sk_buff +============== + +:c:type:`sk_buff` is the main networking structure representing +a packet. + +Basic sk_buff geometry +---------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: Basic sk_buff geometry + +Shared skbs and skb clones +-------------------------- + +:c:member:`sk_buff.users` is a simple refcount allowing multiple entities +to keep a struct sk_buff alive. skbs with a ``sk_buff.users != 1`` are referred +to as shared skbs (see skb_shared()). + +skb_clone() allows for fast duplication of skbs. None of the data buffers +get copied, but caller gets a new metadata struct (struct sk_buff). +&skb_shared_info.refcount indicates the number of skbs pointing at the same +packet data (i.e. clones). + +dataref and headerless skbs +--------------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: dataref and headerless skbs + +Checksum information +-------------------- + +.. kernel-doc:: include/linux/skbuff.h + :doc: skb checksums |