diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-29 21:15:11 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-29 21:15:11 +0300 |
| commit | 7ba31c3f2f1ee095d8126f4d3757fc3b2bc3c838 (patch) | |
| tree | 591a3aab91b3a46a668c97c3cc537b47d004d64b /Documentation | |
| parent | ca9b5b6283984f67434cee810f3b08e19630226d (diff) | |
| parent | fc157998b8257fb9cfe753e7f4af1411da995c9b (diff) | |
| download | linux-7ba31c3f2f1ee095d8126f4d3757fc3b2bc3c838.tar.xz | |
Merge tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the big staging/iio driver patches for 5.6-rc1
Included in here are:
- lots of new IIO drivers and updates for that subsystem
- the usual huge quantity of minor cleanups for staging drivers
- removal of the following staging drivers:
- isdn/avm
- isdn/gigaset
- isdn/hysdn
- octeon-usb
- octeon ethernet
Overall we deleted far more lines than we added, removing over 40k of
old and obsolete driver code.
All of these changes have been in linux-next for a while with no
reported issues"
* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
staging: most: usb: check for NULL device
staging: next: configfs: fix release link
staging: most: core: fix logging messages
staging: most: core: remove container struct
staging: most: remove struct device core driver
staging: most: core: drop device reference
staging: most: remove device from interface structure
staging: comedi: drivers: fix spelling mistake "to" -> "too"
staging: exfat: remove fs_func struct.
staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
staging: wilc1000: return zero on success and non-zero on function failure
staging: axis-fifo: replace spinlock with mutex
staging: wilc1000: remove unused code prior to throughput enhancement in SPI
staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
staging: wilc1000: move firmware API struct's to separate header file
staging: wilc1000: remove use of infinite loop conditions
staging: kpc2000: rename variables with kpc namespace
staging: vt6656: Remove memory buffer from vnt_download_firmware.
staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
staging: vt6656: Use vnt_rx_tail struct for tail variables.
...
Diffstat (limited to 'Documentation')
21 files changed, 397 insertions, 999 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index faaa2166d741..d3e53a6d8331 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1726,3 +1726,16 @@ Contact: linux-iio@vger.kernel.org Description: List of valid periods (in seconds) for which the light intensity must be above the threshold level before interrupt is asserted. + +What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + Center frequency in Hz for a notch filter. Used i.e. for line + noise suppression. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + One of the following thermocouple types: B, E, J, K, N, R, S, T. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer new file mode 100644 index 000000000000..d526e6571001 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer @@ -0,0 +1,19 @@ +What: /sys/bus/iio/devices/iio:deviceX/buffer/length_align_bytes +KernelVersion: 5.4 +Contact: linux-iio@vger.kernel.org +Description: + DMA buffers tend to have a alignment requirement for the + buffers. If this alignment requirement is not met samples might + be dropped from the buffer. + + This property reports the alignment requirements in bytes. + This means that the buffer size in bytes needs to be a integer + multiple of the number reported by this file. + + The alignment requirements in number of sample sets will depend + on the enabled channels and the bytes per channel. This means + that the alignment requirement in samples sets might change + depending on which and how many channels are enabled. Whereas + the alignment requirement reported in bytes by this property + will remain static and does not depend on which channels are + enabled. diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml new file mode 100644 index 000000000000..4147f02b5e3c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16240 Programmable Impact Sensor and Recorder driver + +maintainers: + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + ADIS16240 Programmable Impact Sensor and Recorder driver that supports + SPI interface. + https://www.analog.com/en/products/adis16240.html + +properties: + compatible: + enum: + - adi,adis16240 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adis16240"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt index 3b25b4c4d446..f53237270b32 100644 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -1,11 +1,14 @@ -* Bosch BMA180 / BMA250 triaxial acceleration sensor +* Bosch BMA180 / BMA25x triaxial acceleration sensor http://omapworld.com/BMA180_111_1002839.pdf http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf Required properties: - - compatible : should be "bosch,bma180" or "bosch,bma250" + - compatible : should be one of: + "bosch,bma180" + "bosch,bma250" + "bosch,bma254" - reg : the I2C address of the sensor Optional properties: diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file mode 100644 index 000000000000..c1c6d6f223cf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMA400 triaxial acceleration sensor + +maintainers: + - Dan Robertson <dan@dlrobertson.com> + +description: | + Acceleration and temperature iio sensors with an i2c interface + + Specifications about the sensor can be found at: + https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf + +properties: + compatible: + enum: + - bosch,bma400 + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + vddio-supply: + description: phandle to the regulator that provides power to the sensor's IO + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@14 { + compatible = "bosch,bma400"; + reg = <0x14>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt index eb76a02e2a82..ce950e162d5d 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt @@ -9,9 +9,16 @@ Required properties: "kionix,kxtf9" - reg: i2c slave address +Optional properties: + + - mount-matrix: an optional 3x3 mounting rotation matrix + Example: kxtf9@f { compatible = "kionix,kxtf9"; reg = <0x0F>; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml new file mode 100644 index 000000000000..31ffa275f5fa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7091R5 4-Channel 12-Bit ADC + +maintainers: + - Beniamin Bia <beniamin.bia@analog.com> + +description: | + Analog Devices AD7091R5 4-Channel 12-Bit ADC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf + +properties: + compatible: + enum: + - adi,ad7091r5 + + reg: + maxItems: 1 + + vref-supply: + description: + Phandle to the vref power supply + + interrupts: + maxItems: 1 + + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@2f { + compatible = "adi,ad7091r5"; + reg = <0x2f>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml new file mode 100644 index 000000000000..59009997dca0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology / Analog Devices LTC2496 ADC + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <Michael.Hennerich@analog.com> + - Stefan Popa <stefan.popa@analog.com> + +properties: + compatible: + enum: + - lltc,ltc2496 + + vref-supply: + description: phandle to an external regulator providing the reference voltage + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + reg: + description: spi chipselect number according to the usual spi bindings + + spi-max-frequency: + description: maximal spi bus frequency supported + +required: + - compatible + - vref-supply + - reg + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "lltc,ltc2496"; + reg = <0>; + vref-supply = <<c2496_reg>; + spi-max-frequency = <2000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt deleted file mode 100644 index 59b92cd32552..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ /dev/null @@ -1,13 +0,0 @@ -Device-Tree bindings for sigma delta modulator - -Required properties: -- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use - as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". - -Example node: - - ads1202: adc { - compatible = "sd-modulator"; - #io-channel-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml new file mode 100644 index 000000000000..a390343d0c2a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device-Tree bindings for sigma delta modulator + +maintainers: + - Arnaud Pouliquen <arnaud.pouliquen@st.com> + +properties: + compatible: + description: | + "sd-modulator" can be used as a generic SD modulator, + if the modulator is not specified in the compatible list. + enum: + - sd-modulator + - ads1201 + + '#io-channel-cells': + const: 0 + +required: + - compatible + - '#io-channel-cells' + +additionalProperties: false + +examples: + - | + ads1202: adc { + compatible = "sd-modulator"; + #io-channel-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt index ed7783f45233..cd903a1d880d 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt @@ -8,6 +8,7 @@ Required properties for the ADIS16480: * "adi,adis16480" * "adi,adis16485" * "adi,adis16488" + * "adi,adis16490" * "adi,adis16495-1" * "adi,adis16495-2" * "adi,adis16495-3" diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml new file mode 100644 index 000000000000..9f5ca9c42025 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Tomislav Denis <tomislav.denis@avl.com> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + http://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml new file mode 100644 index 000000000000..a079c9921af6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parallax PING))) and LaserPING range finder + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Bit-banging driver using one GPIO: + - ping-gpios is raised by the driver to start measurement + - direction of ping-gpio is then switched into input with an interrupt + for receiving distance value as PWM signal + + Specifications about the devices can be found at: + http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf + http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf + +properties: + compatible: + enum: + - parallax,ping + - parallax,laserping + + ping-gpios: + description: + Definition of the GPIO for the triggering and echo (output and input) + This GPIO is set for about 5 us by the driver to tell the device it + should initiate the measurement cycle. Afterwards the GPIO is switched + to input direction with an interrupt. The device sets it and the + length of the input signal corresponds to the measured distance. + It needs to be an GPIO which is able to deliver an interrupt because + the time between two interrupts is measured in the driver. + See Documentation/devicetree/bindings/gpio/gpio.txt for information + on how to specify a consumer gpio. + maxItems: 1 + +required: + - compatible + - ping-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + proximity { + compatible = "parallax,laserping"; + ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt index 28bc5c4d965b..bb85cd0e039c 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt +++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt @@ -5,7 +5,10 @@ Maxim thermocouple support Required properties: - - compatible: must be "maxim,max31855" or "maxim,max6675" + - compatible: must be "maxim,max6675" or one of the following: + "maxim,max31855k", "maxim,max31855j", "maxim,max31855n", + "maxim,max31855s", "maxim,max31855t", "maxim,max31855e", + "maxim,max31855r"; the generic "max,max31855" is deprecated. - reg: SPI chip select number for the device - spi-max-frequency: must be 4300000 - spi-cpha: must be defined for max6675 to enable SPI mode 1 @@ -15,7 +18,7 @@ Required properties: Example: max31855@0 { - compatible = "maxim,max31855"; + compatible = "maxim,max31855k"; reg = <0>; spi-max-frequency = <4300000>; }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9cb3bc683db7..315ebac520b3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -109,6 +109,8 @@ patternProperties: description: Artesyn Embedded Technologies Inc. "^asahi-kasei,.*": description: Asahi Kasei Corp. + "^asc,.*": + description: All Sensors Corporation "^aspeed,.*": description: ASPEED Technology Inc. "^asus,.*": @@ -717,6 +719,8 @@ patternProperties: description: Panasonic Corporation "^parade,.*": description: Parade Technologies Inc. + "^parallax,.*": + description: Parallax Inc. "^pda,.*": description: Precision Design Associates, Inc. "^pericom,.*": diff --git a/Documentation/isdn/avmb1.rst b/Documentation/isdn/avmb1.rst deleted file mode 100644 index de3961e67553..000000000000 --- a/Documentation/isdn/avmb1.rst +++ /dev/null @@ -1,246 +0,0 @@ -================================ -Driver for active AVM Controller -================================ - -The driver provides a kernel capi2.0 Interface (kernelcapi) and -on top of this a User-Level-CAPI2.0-interface (capi) -and a driver to connect isdn4linux with CAPI2.0 (capidrv). -The lowlevel interface can be used to implement a CAPI2.0 -also for passive cards since July 1999. - -The author can be reached at calle@calle.in-berlin.de. -The command avmcapictrl is part of the isdn4k-utils. -t4-files can be found at ftp://ftp.avm.de/cardware/b1/linux/firmware - -Currently supported cards: - - - B1 ISA (all versions) - - B1 PCI - - T1/T1B (HEMA card) - - M1 - - M2 - - B1 PCMCIA - -Installing ----------- - -You need at least /dev/capi20 to load the firmware. - -:: - - mknod /dev/capi20 c 68 0 - mknod /dev/capi20.00 c 68 1 - mknod /dev/capi20.01 c 68 2 - . - . - . - mknod /dev/capi20.19 c 68 20 - -Running -------- - -To use the card you need the t4-files to download the firmware. -AVM GmbH provides several t4-files for the different D-channel -protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn. - -if you configure as modules load the modules this way:: - - insmod /lib/modules/current/misc/capiutil.o - insmod /lib/modules/current/misc/b1.o - insmod /lib/modules/current/misc/kernelcapi.o - insmod /lib/modules/current/misc/capidrv.o - insmod /lib/modules/current/misc/capi.o - -if you have an B1-PCI card load the module b1pci.o:: - - insmod /lib/modules/current/misc/b1pci.o - -and load the firmware with:: - - avmcapictrl load /lib/isdn/b1.t4 1 - -if you have an B1-ISA card load the module b1isa.o -and add the card by calling:: - - avmcapictrl add 0x150 15 - -and load the firmware by calling:: - - avmcapictrl load /lib/isdn/b1.t4 1 - -if you have an T1-ISA card load the module t1isa.o -and add the card by calling:: - - avmcapictrl add 0x450 15 T1 0 - -and load the firmware by calling:: - - avmcapictrl load /lib/isdn/t1.t4 1 - -if you have an PCMCIA card (B1/M1/M2) load the module b1pcmcia.o -before you insert the card. - -Leased Lines with B1 --------------------- - -Init card and load firmware. - -For an D64S use "FV: 1" as phone number - -For an D64S2 use "FV: 1" and "FV: 2" for multilink -or "FV: 1,2" to use CAPI channel bundling. - -/proc-Interface ------------------ - -/proc/capi:: - - dr-xr-xr-x 2 root root 0 Jul 1 14:03 . - dr-xr-xr-x 82 root root 0 Jun 30 19:08 .. - -r--r--r-- 1 root root 0 Jul 1 14:03 applications - -r--r--r-- 1 root root 0 Jul 1 14:03 applstats - -r--r--r-- 1 root root 0 Jul 1 14:03 capi20 - -r--r--r-- 1 root root 0 Jul 1 14:03 capidrv - -r--r--r-- 1 root root 0 Jul 1 14:03 controller - -r--r--r-- 1 root root 0 Jul 1 14:03 contrstats - -r--r--r-- 1 root root 0 Jul 1 14:03 driver - -r--r--r-- 1 root root 0 Jul 1 14:03 ncci - -r--r--r-- 1 root root 0 Jul 1 14:03 users - -/proc/capi/applications: - applid level3cnt datablkcnt datablklen ncci-cnt recvqueuelen - level3cnt: - capi_register parameter - datablkcnt: - capi_register parameter - ncci-cnt: - current number of nccis (connections) - recvqueuelen: - number of messages on receive queue - - for example:: - - 1 -2 16 2048 1 0 - 2 2 7 2048 1 0 - -/proc/capi/applstats: - applid recvctlmsg nrecvdatamsg nsentctlmsg nsentdatamsg - recvctlmsg: - capi messages received without DATA_B3_IND - recvdatamsg: - capi DATA_B3_IND received - sentctlmsg: - capi messages sent without DATA_B3_REQ - sentdatamsg: - capi DATA_B3_REQ sent - - for example:: - - 1 2057 1699 1721 1699 - -/proc/capi/capi20: statistics of capi.o (/dev/capi20) - minor nopen nrecvdropmsg nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg - minor: - minor device number of capi device - nopen: - number of calls to devices open - nrecvdropmsg: - capi messages dropped (messages in recvqueue in close) - nrecvctlmsg: - capi messages received without DATA_B3_IND - nrecvdatamsg: - capi DATA_B3_IND received - nsentctlmsg: - capi messages sent without DATA_B3_REQ - nsentdatamsg: - capi DATA_B3_REQ sent - - for example:: - - 1 2 18 0 16 2 - -/proc/capi/capidrv: statistics of capidrv.o (capi messages) - nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg - nrecvctlmsg: - capi messages received without DATA_B3_IND - nrecvdatamsg: - capi DATA_B3_IND received - nsentctlmsg: - capi messages sent without DATA_B3_REQ - nsentdatamsg: - capi DATA_B3_REQ sent - - for example: - 2780 2226 2256 2226 - -/proc/capi/controller: - controller drivername state cardname controllerinfo - - for example:: - - 1 b1pci running b1pci-e000 B1 3.07-01 0xe000 19 - 2 t1isa running t1isa-450 B1 3.07-01 0x450 11 0 - 3 b1pcmcia running m2-150 B1 3.07-01 0x150 5 - -/proc/capi/contrstats: - controller nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg - nrecvctlmsg: - capi messages received without DATA_B3_IND - nrecvdatamsg: - capi DATA_B3_IND received - nsentctlmsg: - capi messages sent without DATA_B3_REQ - nsentdatamsg: - capi DATA_B3_REQ sent - - for example:: - - 1 2845 2272 2310 2274 - 2 2 0 2 0 - 3 2 0 2 0 - -/proc/capi/driver: - drivername ncontroller - - for example:: - - b1pci 1 - t1isa 1 - b1pcmcia 1 - b1isa 0 - -/proc/capi/ncci: - apllid ncci winsize sendwindow - - for example:: - - 1 0x10101 8 0 - -/proc/capi/users: kernelmodules that use the kernelcapi. - name - - for example:: - - capidrv - capi20 - -Questions ---------- - -Check out the FAQ (ftp.isdn4linux.de) or subscribe to the -linux-avmb1@calle.in-berlin.de mailing list by sending -a mail to majordomo@calle.in-berlin.de with -subscribe linux-avmb1 -in the body. - -German documentation and several scripts can be found at -ftp://ftp.avm.de/cardware/b1/linux/ - -Bugs ----- - -If you find any please let me know. - -Enjoy, - -Carsten Paeth (calle@calle.in-berlin.de) diff --git a/Documentation/isdn/gigaset.rst b/Documentation/isdn/gigaset.rst deleted file mode 100644 index 98b4ec521c51..000000000000 --- a/Documentation/isdn/gigaset.rst +++ /dev/null @@ -1,465 +0,0 @@ -========================== -GigaSet 307x Device Driver -========================== - -1. Requirements -================= - -1.1. Hardware -------------- - - This driver supports the connection of the Gigaset 307x/417x family of - ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB - connection. The following devices are reported to be compatible: - - Bases: - - Siemens Gigaset 3070/3075 isdn - - Siemens Gigaset 4170/4175 isdn - - Siemens Gigaset SX205/255 - - Siemens Gigaset SX353 - - T-Com Sinus 45 [AB] isdn - - T-Com Sinus 721X[A] [SE] - - Vox Chicago 390 ISDN (KPN Telecom) - - RS232 data boxes: - - Siemens Gigaset M101 Data - - T-Com Sinus 45 Data 1 - - USB data boxes: - - Siemens Gigaset M105 Data - - Siemens Gigaset USB Adapter DECT - - T-Com Sinus 45 Data 2 - - T-Com Sinus 721 data - - Chicago 390 USB (KPN) - - See also http://www.erbze.info/sinus_gigaset.htm - (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) and - http://gigaset307x.sourceforge.net/ - - We had also reports from users of Gigaset M105 who could use the drivers - with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.) - If you have another device that works with our driver, please let us know. - - Chances of getting an USB device to work are good if the output of:: - - lsusb - - at the command line contains one of the following:: - - ID 0681:0001 - ID 0681:0002 - ID 0681:0009 - ID 0681:0021 - ID 0681:0022 - -1.2. Software -------------- - - The driver works with the Kernel CAPI subsystem and can be used with any - software which is able to use CAPI 2.0 for ISDN connections (voice or data). - - There are some user space tools available at - https://sourceforge.net/projects/gigaset307x/ - which provide access to additional device specific functions like SMS, - phonebook or call journal. - - -2. How to use the driver -========================== - -2.1. Modules ------------- - - For the devices to work, the proper kernel modules have to be loaded. - This normally happens automatically when the system detects the USB - device (base, M105) or when the line discipline is attached (M101). It - can also be triggered manually using the modprobe(8) command, for example - for troubleshooting or to pass module parameters. - - The module ser_gigaset provides a serial line discipline N_GIGASET_M101 - which uses the regular serial port driver to access the device, and must - therefore be attached to the serial device to which the M101 is connected. - The ldattach(8) command (included in util-linux-ng release 2.14 or later) - can be used for that purpose, for example:: - - ldattach GIGASET_M101 /dev/ttyS1 - - This will open the device file, attach the line discipline to it, and - then sleep in the background, keeping the device open so that the line - discipline remains active. To deactivate it, kill the daemon, for example - with:: - - killall ldattach - - before disconnecting the device. To have this happen automatically at - system startup/shutdown on an LSB compatible system, create and activate - an appropriate LSB startup script /etc/init.d/gigaset. (The init name - 'gigaset' is officially assigned to this project by LANANA.) - Alternatively, just add the 'ldattach' command line to /etc/rc.local. - - The modules accept the following parameters: - - =============== ========== ========================================== - Module Parameter Meaning - - gigaset debug debug level (see section 3.2.) - - startmode initial operation mode (see section 2.5.): - bas_gigaset ) 1=CAPI (default), 0=Unimodem - ser_gigaset ) - usb_gigaset ) cidmode initial Call-ID mode setting (see section - 2.5.): 1=on (default), 0=off - - =============== ========== ========================================== - - Depending on your distribution you may want to create a separate module - configuration file like /etc/modprobe.d/gigaset.conf for these. - -2.2. Device nodes for user space programs ------------------------------------------ - - The device can be accessed from user space (eg. by the user space tools - mentioned in 1.2.) through the device nodes: - - - /dev/ttyGS0 for M101 (RS232 data boxes) - - /dev/ttyGU0 for M105 (USB data boxes) - - /dev/ttyGB0 for the base driver (direct USB connection) - - If you connect more than one device of a type, they will get consecutive - device nodes, eg. /dev/ttyGU1 for a second M105. - - You can also set a "default device" for the user space tools to use when - no device node is given as parameter, by creating a symlink /dev/ttyG to - one of them, eg.:: - - ln -s /dev/ttyGB0 /dev/ttyG - - The devices accept the following device specific ioctl calls - (defined in gigaset_dev.h): - - ``ioctl(int fd, GIGASET_REDIR, int *cmd);`` - - If cmd==1, the device is set to be controlled exclusively through the - character device node; access from the ISDN subsystem is blocked. - - If cmd==0, the device is set to be used from the ISDN subsystem and does - not communicate through the character device node. - - ``ioctl(int fd, GIGASET_CONFIG, int *cmd);`` - - (ser_gigaset and usb_gigaset only) - - If cmd==1, the device is set to adapter configuration mode where commands - are interpreted by the M10x DECT adapter itself instead of being - forwarded to the base station. In this mode, the device accepts the - commands described in Siemens document "AT-Kommando Alignment M10x Data" - for setting the operation mode, associating with a base station and - querying parameters like field strengh and signal quality. - - Note that there is no ioctl command for leaving adapter configuration - mode and returning to regular operation. In order to leave adapter - configuration mode, write the command ATO to the device. - - ``ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);`` - - (usb_gigaset only) - - Set the break characters on an M105's internal serial adapter to the six - bytes stored in brkchars[]. Unused bytes should be set to zero. - - ioctl(int fd, GIGASET_VERSION, unsigned version[4]); - Retrieve version information from the driver. version[0] must be set to - one of: - - - GIGVER_DRIVER: retrieve driver version - - GIGVER_COMPAT: retrieve interface compatibility version - - GIGVER_FWBASE: retrieve the firmware version of the base - - Upon return, version[] is filled with the requested version information. - -2.3. CAPI ---------- - - The devices will show up as CAPI controllers as soon as the - corresponding driver module is loaded, and can then be used with - CAPI 2.0 kernel and user space applications. For user space access, - the module capi.ko must be loaded. - - Most distributions handle loading and unloading of the various CAPI - modules automatically via the command capiinit(1) from the capi4k-utils - package or a similar mechanism. Note that capiinit(1) cannot unload the - Gigaset drivers because it doesn't support more than one module per - driver. - -2.5. Unimodem mode ------------------- - - In this mode the device works like a modem connected to a serial port - (the /dev/ttyGU0, ... mentioned above) which understands the commands:: - - ATZ init, reset - => OK or ERROR - ATD - ATDT dial - => OK, CONNECT, - BUSY, - NO DIAL TONE, - NO CARRIER, - NO ANSWER - <pause>+++<pause> change to command mode when connected - ATH hangup - - You can use some configuration tool of your distribution to configure this - "modem" or configure pppd/wvdial manually. There are some example ppp - configuration files and chat scripts in the gigaset-VERSION/ppp directory - in the driver packages from https://sourceforge.net/projects/gigaset307x/. - Please note that the USB drivers are not able to change the state of the - control lines. This means you must use "Stupid Mode" if you are using - wvdial or you should use the nocrtscts option of pppd. - You must also assure that the ppp_async module is loaded with the parameter - flag_time=0. You can do this e.g. by adding a line like:: - - options ppp_async flag_time=0 - - to an appropriate module configuration file, like:: - - /etc/modprobe.d/gigaset.conf. - - Unimodem mode is needed for making some devices [e.g. SX100] work which - do not support the regular Gigaset command set. If debug output (see - section 3.2.) shows something like this when dialing:: - - CMD Received: ERROR - Available Params: 0 - Connection State: 0, Response: -1 - gigaset_process_response: resp_code -1 in ConState 0 ! - Timeout occurred - - then switching to unimodem mode may help. - - If you have installed the command line tool gigacontr, you can enter - unimodem mode using:: - - gigacontr --mode unimodem - - You can switch back using:: - - gigacontr --mode isdn - - You can also put the driver directly into Unimodem mode when it's loaded, - by passing the module parameter startmode=0 to the hardware specific - module, e.g.:: - - modprobe usb_gigaset startmode=0 - - or by adding a line like:: - - options usb_gigaset startmode=0 - - to an appropriate module configuration file, like:: - - /etc/modprobe.d/gigaset.conf - -2.6. Call-ID (CID) mode ------------------------ - - Call-IDs are numbers used to tag commands to, and responses from, the - Gigaset base in order to support the simultaneous handling of multiple - ISDN calls. Their use can be enabled ("CID mode") or disabled ("Unimodem - mode"). Without Call-IDs (in Unimodem mode), only a very limited set of - functions is available. It allows outgoing data connections only, but - does not signal incoming calls or other base events. - - DECT cordless data devices (M10x) permanently occupy the cordless - connection to the base while Call-IDs are activated. As the Gigaset - bases only support one DECT data connection at a time, this prevents - other DECT cordless data devices from accessing the base. - - During active operation, the driver switches to the necessary mode - automatically. However, for the reasons above, the mode chosen when - the device is not in use (idle) can be selected by the user. - - - If you want to receive incoming calls, you can use the default - settings (CID mode). - - If you have several DECT data devices (M10x) which you want to use - in turn, select Unimodem mode by passing the parameter "cidmode=0" to - the appropriate driver module (ser_gigaset or usb_gigaset). - - If you want both of these at once, you are out of luck. - - You can also use the tty class parameter "cidmode" of the device to - change its CID mode while the driver is loaded, eg.:: - - echo 0 > /sys/class/tty/ttyGU0/cidmode - -2.7. Dialing Numbers --------------------- -provided by an application for dialing out must - be a public network number according to the local dialing plan, without - any dial prefix for getting an outside line. - - Internal calls can be made by providing an internal extension number - prefixed with ``**`` (two asterisks) as the called party number. So to dial - eg. the first registered DECT handset, give ``**11`` as the called party - number. Dialing ``***`` (three asterisks) calls all extensions - simultaneously (global call). - - Unimodem mode does not support internal calls. - -2.8. Unregistered Wireless Devices (M101/M105) ----------------------------------------------- - - The main purpose of the ser_gigaset and usb_gigaset drivers is to allow - the M101 and M105 wireless devices to be used as ISDN devices for ISDN - connections through a Gigaset base. Therefore they assume that the device - is registered to a DECT base. - - If the M101/M105 device is not registered to a base, initialization of - the device fails, and a corresponding error message is logged by the - driver. In that situation, a restricted set of functions is available - which includes, in particular, those necessary for registering the device - to a base or for switching it between Fixed Part and Portable Part - modes. See the gigacontr(8) manpage for details. - -3. Troubleshooting -==================== - -3.1. Solutions to frequently reported problems ----------------------------------------------- - - Problem: - You have a slow provider and isdn4linux gives up dialing too early. - Solution: - Load the isdn module using the dialtimeout option. You can do this e.g. - by adding a line like:: - - options isdn dialtimeout=15 - - to /etc/modprobe.d/gigaset.conf or a similar file. - - Problem: - The isdnlog program emits error messages or just doesn't work. - Solution: - Isdnlog supports only the HiSax driver. Do not attempt to use it with - other drivers such as Gigaset. - - Problem: - You have two or more DECT data adapters (M101/M105) and only the - first one you turn on works. - Solution: - Select Unimodem mode for all DECT data adapters. (see section 2.5.) - - Problem: - Messages like this:: - - usb_gigaset 3-2:1.0: Could not initialize the device. - - appear in your syslog. - Solution: - Check whether your M10x wireless device is correctly registered to the - Gigaset base. (see section 2.7.) - -3.2. Telling the driver to provide more information ---------------------------------------------------- - Building the driver with the "Gigaset debugging" kernel configuration - option (CONFIG_GIGASET_DEBUG) gives it the ability to produce additional - information useful for debugging. - - You can control the amount of debugging information the driver produces by - writing an appropriate value to /sys/module/gigaset/parameters/debug, - e.g.:: - - echo 0 > /sys/module/gigaset/parameters/debug - - switches off debugging output completely, - - :: - - echo 0x302020 > /sys/module/gigaset/parameters/debug - - enables a reasonable set of debugging output messages. These values are - bit patterns where every bit controls a certain type of debugging output. - See the constants DEBUG_* in the source file gigaset.h for details. - - The initial value can be set using the debug parameter when loading the - module "gigaset", e.g. by adding a line:: - - options gigaset debug=0 - - to your module configuration file, eg. /etc/modprobe.d/gigaset.conf - - Generated debugging information can be found - - as output of the command:: - - dmesg - - - in system log files written by your syslog daemon, usually - in /var/log/, e.g. /var/log/messages. - -3.3. Reporting problems and bugs --------------------------------- - If you can't solve problems with the driver on your own, feel free to - use one of the forums, bug trackers, or mailing lists on - - https://sourceforge.net/projects/gigaset307x - - or write an electronic mail to the maintainers. - - Try to provide as much information as possible, such as - - - distribution - - kernel version (uname -r) - - gcc version (gcc --version) - - hardware architecture (uname -m, ...) - - type and firmware version of your device (base and wireless module, - if any) - - output of "lsusb -v" (if using an USB device) - - error messages - - relevant system log messages (it would help if you activate debug - output as described in 3.2.) - - For help with general configuration problems not specific to our driver, - such as isdn4linux and network configuration issues, please refer to the - appropriate forums and newsgroups. - -3.4. Reporting problem solutions --------------------------------- - If you solved a problem with our drivers, wrote startup scripts for your - distribution, ... feel free to contact us (using one of the places - mentioned in 3.3.). We'd like to add scripts, hints, documentation - to the driver and/or the project web page. - - -4. Links, other software -========================== - - - Sourceforge project developing this driver and associated tools - https://sourceforge.net/projects/gigaset307x - - Yahoo! Group on the Siemens Gigaset family of devices - https://de.groups.yahoo.com/group/Siemens-Gigaset - - Siemens Gigaset/T-Sinus compatibility table - http://www.erbze.info/sinus_gigaset.htm - (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) - - -5. Credits -============ - - Thanks to - - Karsten Keil - for his help with isdn4linux - Deti Fliegl - for his base driver code - Dennis Dietrich - for his kernel 2.6 patches - Andreas Rummel - for his work and logs to get unimodem mode working - Andreas Degert - for his logs and patches to get cx 100 working - Dietrich Feist - for his generous donation of one M105 and two M101 cordless adapters - Christoph Schweers - for his generous donation of a M34 device - - and all the other people who sent logs and other information. diff --git a/Documentation/isdn/hysdn.rst b/Documentation/isdn/hysdn.rst deleted file mode 100644 index 0a168d1cbffc..000000000000 --- a/Documentation/isdn/hysdn.rst +++ /dev/null @@ -1,196 +0,0 @@ -============ -Hysdn Driver -============ - -The hysdn driver has been written by -Werner Cornelius (werner@isdn4linux.de or werner@titro.de) -for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver -under the GNU General Public License. - -The CAPI 2.0-support was added by Ulrich Albrecht (ualbrecht@hypercope.de) -for Hypercope GmbH Aachen, Germany. - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -.. Table of contents - - 1. About the driver - - 2. Loading/Unloading the driver - - 3. Entries in the /proc filesystem - - 4. The /proc/net/hysdn/cardconfX file - - 5. The /proc/net/hysdn/cardlogX file - - 6. Where to get additional info and help - - -1. About the driver -=================== - - The drivers/isdn/hysdn subdir contains a driver for HYPERCOPEs active - PCI isdn cards Champ, Ergo and Metro. To enable support for this cards - enable ISDN support in the kernel config and support for HYSDN cards in - the active cards submenu. The driver may only be compiled and used if - support for loadable modules and the process filesystem have been enabled. - - These cards provide two different interfaces to the kernel. Without the - optional CAPI 2.0 support, they register as ethernet card. IP-routing - to a ISDN-destination is performed on the card itself. All necessary - handlers for various protocols like ppp and others as well as config info - and firmware may be fetched from Hypercopes WWW-Site www.hypercope.de. - - With CAPI 2.0 support enabled, the card can also be used as a CAPI 2.0 - compliant devices with either CAPI 2.0 applications - (check isdn4k-utils) or -using the capidrv module- as a regular - isdn4linux device. This is done via the same mechanism as with the - active AVM cards and in fact uses the same module. - - -2. Loading/Unloading the driver -=============================== - - The module has no command line parameters and auto detects up to 10 cards - in the id-range 0-9. - If a loaded driver shall be unloaded all open files in the /proc/net/hysdn - subdir need to be closed and all ethernet interfaces allocated by this - driver must be shut down. Otherwise the module counter will avoid a module - unload. - - If you are using the CAPI 2.0-interface, make sure to load/modprobe the - kernelcapi-module first. - - If you plan to use the capidrv-link to isdn4linux, make sure to load - capidrv.o after all modules using this driver (i.e. after hysdn and - any avm-specific modules). - -3. Entries in the /proc filesystem -================================== - - When the module has been loaded it adds the directory hysdn in the - /proc/net tree. This directory contains exactly 2 file entries for each - card. One is called cardconfX and the other cardlogX, where X is the - card id number from 0 to 9. - The cards are numbered in the order found in the PCI config data. - -4. The /proc/net/hysdn/cardconfX file -===================================== - - This file may be read to get by everyone to get info about the cards type, - actual state, available features and used resources. - The first 3 entries (id, bus and slot) are PCI info fields, the following - type field gives the information about the cards type: - - - 4 -> Ergo card (server card with 2 b-chans) - - 5 -> Metro card (server card with 4 or 8 b-chans) - - 6 -> Champ card (client card with 2 b-chans) - - The following 3 fields show the hardware assignments for irq, iobase and the - dual ported memory (dp-mem). - - The fields b-chans and fax-chans announce the available card resources of - this types for the user. - - The state variable indicates the actual drivers state for this card with the - following assignments. - - - 0 -> card has not been booted since driver load - - 1 -> card booting is actually in progess - - 2 -> card is in an error state due to a previous boot failure - - 3 -> card is booted and active - - And the last field (device) shows the name of the ethernet device assigned - to this card. Up to the first successful boot this field only shows a - - to tell that no net device has been allocated up to now. Once a net device - has been allocated it remains assigned to this card, even if a card is - rebooted and an boot error occurs. - - Writing to the cardconfX file boots the card or transfers config lines to - the cards firmware. The type of data is automatically detected when the - first data is written. Only root has write access to this file. - The firmware boot files are normally called hyclient.pof for client cards - and hyserver.pof for server cards. - After successfully writing the boot file, complete config files or single - config lines may be copied to this file. - If an error occurs the return value given to the writing process has the - following additional codes (decimal): - - ==== ============================================ - 1000 Another process is currently bootng the card - 1001 Invalid firmware header - 1002 Boards dual-port RAM test failed - 1003 Internal firmware handler error - 1004 Boot image size invalid - 1005 First boot stage (bootstrap loader) failed - 1006 Second boot stage failure - 1007 Timeout waiting for card ready during boot - 1008 Operation only allowed in booted state - 1009 Config line too long - 1010 Invalid channel number - 1011 Timeout sending config data - ==== ============================================ - - Additional info about error reasons may be fetched from the log output. - -5. The /proc/net/hysdn/cardlogX file -==================================== - - The cardlogX file entry may be opened multiple for reading by everyone to - get the cards and drivers log data. Card messages always start with the - keyword LOG. All other lines are output from the driver. - The driver log data may be redirected to the syslog by selecting the - appropriate bitmask. The cards log messages will always be send to this - interface but never to the syslog. - - A root user may write a decimal or hex (with 0x) value t this file to select - desired output options. As mentioned above the cards log dat is always - written to the cardlog file independent of the following options only used - to check and debug the driver itself: - - For example:: - - echo "0x34560078" > /proc/net/hysdn/cardlog0 - - to output the hex log mask 34560078 for card 0. - - The written value is regarded as an unsigned 32-Bit value, bit ored for - desired output. The following bits are already assigned: - - ========== ============================================================ - 0x80000000 All driver log data is alternatively via syslog - 0x00000001 Log memory allocation errors - 0x00000010 Firmware load start and close are logged - 0x00000020 Log firmware record parser - 0x00000040 Log every firmware write actions - 0x00000080 Log all card related boot messages - 0x00000100 Output all config data sent for debugging purposes - 0x00000200 Only non comment config lines are shown wth channel - 0x00000400 Additional conf log output - 0x00001000 Log the asynchronous scheduler actions (config and log) - 0x00100000 Log all open and close actions to /proc/net/hysdn/card files - 0x00200000 Log all actions from /proc file entries - 0x00010000 Log network interface init and deinit - ========== ============================================================ - -6. Where to get additional info and help -======================================== - - If you have any problems concerning the driver or configuration contact - the Hypercope support team (support@hypercope.de) and or the authors - Werner Cornelius (werner@isdn4linux or cornelius@titro.de) or - Ulrich Albrecht (ualbrecht@hypercope.de). diff --git a/Documentation/isdn/index.rst b/Documentation/isdn/index.rst index 407e74b78372..9622939fa526 100644 --- a/Documentation/isdn/index.rst +++ b/Documentation/isdn/index.rst @@ -9,9 +9,6 @@ ISDN interface_capi - avmb1 - gigaset - hysdn m_isdn credits diff --git a/Documentation/isdn/interface_capi.rst b/Documentation/isdn/interface_capi.rst index 01a4b5ade9a4..fe2421444b76 100644 --- a/Documentation/isdn/interface_capi.rst +++ b/Documentation/isdn/interface_capi.rst @@ -26,13 +26,6 @@ This standard is freely available from https://www.capi.org. 2. Driver and Device Registration ================================= -CAPI drivers optionally register themselves with Kernel CAPI by calling the -Kernel CAPI function register_capi_driver() with a pointer to a struct -capi_driver. This structure must be filled with the name and revision of the -driver, and optionally a pointer to a callback function, add_card(). The -registration can be revoked by calling the function unregister_capi_driver() -with a pointer to the same struct capi_driver. - CAPI drivers must register each of the ISDN devices they control with Kernel CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a struct capi_ctr before they can be used. This structure must be filled with @@ -89,9 +82,6 @@ register_capi_driver(): the name of the driver, as a zero-terminated ASCII string ``char revision[32]`` the revision number of the driver, as a zero-terminated ASCII string -``int (*add_card)(struct capi_driver *driver, capicardparams *data)`` - a callback function pointer (may be NULL) - 4.2 struct capi_ctr ------------------- @@ -178,12 +168,6 @@ to be set by the driver before calling attach_capi_ctr(): pointer to a callback function returning the entry for the device in the CAPI controller info table, /proc/capi/controller -``const struct file_operations *proc_fops`` - pointers to callback functions for the device's proc file - system entry, /proc/capi/controllers/<n>; pointer to the device's - capi_ctr structure is available from struct proc_dir_entry::data - which is available from struct inode. - Note: Callback functions except send_message() are never called in interrupt context. @@ -267,25 +251,10 @@ _cmstruct alternative representation for CAPI parameters of type 'struct' _cmsg structure members. =========== ================================================================= -Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert -messages between their transport encoding described in the CAPI 2.0 standard -and their _cmsg structure representation. Note that capi_cmsg2message() does -not know or check the size of its destination buffer. The caller must make -sure it is big enough to accommodate the resulting CAPI message. - 5. Lower Layer Interface Functions ================================== -(declared in <linux/isdn/capilli.h>) - -:: - - void register_capi_driver(struct capi_driver *drvr) - void unregister_capi_driver(struct capi_driver *drvr) - -register/unregister a driver with Kernel CAPI - :: int attach_capi_ctr(struct capi_ctr *ctrlr) @@ -302,13 +271,6 @@ signal controller ready/not ready :: - void capi_ctr_suspend_output(struct capi_ctr *ctrlr) - void capi_ctr_resume_output(struct capi_ctr *ctrlr) - -signal suspend/resume - -:: - void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid, struct sk_buff *skb) @@ -319,21 +281,6 @@ for forwarding to the specified application 6. Helper Functions and Macros ============================== -Library functions (from <linux/isdn/capilli.h>): - -:: - - void capilib_new_ncci(struct list_head *head, u16 applid, - u32 ncci, u32 winsize) - void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci) - void capilib_release_appl(struct list_head *head, u16 applid) - void capilib_release(struct list_head *head) - void capilib_data_b3_conf(struct list_head *head, u16 applid, - u32 ncci, u16 msgid) - u16 capilib_data_b3_req(struct list_head *head, u16 applid, - u32 ncci, u16 msgid) - - Macros to extract/set element values from/in a CAPI message header (from <linux/isdn/capiutil.h>): @@ -357,24 +304,6 @@ CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16) Library functions for working with _cmsg structures (from <linux/isdn/capiutil.h>): -``unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)`` - Assembles a CAPI 2.0 message from the parameters in ``*cmsg``, - storing the result in ``*msg``. - -``unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)`` - Disassembles the CAPI 2.0 message in ``*msg``, storing the parameters - in ``*cmsg``. - -``unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand, u16 Messagenumber, u32 Controller)`` - Fills the header part and address field of the _cmsg structure ``*cmsg`` - with the given values, zeroing the remainder of the structure so only - parameters with non-default values need to be changed before sending - the message. - -``void capi_cmsg_answer(_cmsg *cmsg)`` - Sets the low bit of the Subcommand field in ``*cmsg``, thereby - converting ``_REQ`` to ``_CONF`` and ``_IND`` to ``_RESP``. - ``char *capi_cmd2str(u8 Command, u8 Subcommand)`` Returns the CAPI 2.0 message name corresponding to the given command and subcommand values, as a static ASCII string. The return value may diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 4ef86433bd67..2e91370dc159 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -132,7 +132,6 @@ Code Seq# Include File Comments 'F' 80-8F linux/arcfb.h conflict! 'F' DD video/sstfb.h conflict! 'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict! -'G' 00-0F linux/gigaset_dev.h conflict! 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! |