summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 22:56:33 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 22:56:33 +0300
commit1553d96854b47953e41e7f66b2bdbc1c0d13a3e5 (patch)
tree7f6dc7da750e8e8c8f18ca3dd95eecf004033036 /Documentation
parent3fec0eaaf04adf5e23b2704f5490d5943fb8b0b1 (diff)
parent141bc97c1bfe31397b2a12e5676d0c2692c8e07e (diff)
downloadlinux-1553d96854b47953e41e7f66b2bdbc1c0d13a3e5.tar.xz
Merge tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-class-remoteproc44
-rw-r--r--Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml281
2 files changed, 325 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
index 36094fbeb974..066b9b6f4924 100644
--- a/Documentation/ABI/testing/sysfs-class-remoteproc
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -58,3 +58,47 @@ Description: Remote processor name
Reports the name of the remote processor. This can be used by
userspace in exactly identifying a remote processor and ease
up the usage in modifying the 'firmware' or 'state' files.
+
+What: /sys/class/remoteproc/.../coredump
+Date: July 2020
+Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description: Remote processor coredump configuration
+
+ Reports the coredump configuration of the remote processor,
+ which will be one of:
+
+ "disabled"
+ "enabled"
+ "inline"
+
+ "disabled" means no dump will be collected.
+
+ "enabled" means when the remote processor's coredump is
+ collected it will be copied to a separate buffer and that
+ buffer is exposed to userspace.
+
+ "inline" means when the remote processor's coredump is
+ collected userspace will directly read from the remote
+ processor's device memory. Extra buffer will not be used to
+ copy the dump. Also recovery process will not proceed until
+ all data is read by usersapce.
+
+What: /sys/class/remoteproc/.../recovery
+Date: July 2020
+Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description: Remote processor recovery mechanism
+
+ Reports the recovery mechanism of the remote processor,
+ which will be one of:
+
+ "enabled"
+ "disabled"
+
+ "enabled" means, the remote processor will be automatically
+ recovered whenever it crashes. Moreover, if the remote
+ processor crashes while recovery is disabled, it will
+ be automatically recovered too as soon as recovery is enabled.
+
+ "disabled" means, a remote processor will remain in a crashed
+ state if it crashes. This is useful for debugging purposes;
+ without it, debugging a crash is substantially harder.
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
new file mode 100644
index 000000000000..4069f0f5e8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 R5F processor subsystems
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |
+ The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F
+ processor subsystems/clusters (R5FSS). The dual core cluster can be used
+ either in a LockStep mode providing safety/fault tolerance features or in a
+ Split mode providing two individual compute cores for doubling the compute
+ capacity. These are used together with other processors present on the SoC
+ to achieve various system level goals.
+
+ Each Dual-Core R5F sub-system is represented as a single DTS node
+ representing the cluster, with a pair of child DT nodes representing
+ the individual R5F cores. Each node has a number of required or optional
+ properties that enable the OS running on the host processor to perform
+ the device management of the remote processor and to communicate with the
+ remote processor.
+
+properties:
+ $nodename:
+ pattern: "^r5fss(@.*)?"
+
+ compatible:
+ enum:
+ - ti,am654-r5fss
+ - ti,j721e-r5fss
+
+ power-domains:
+ description: |
+ Should contain a phandle to a PM domain provider node and an args
+ specifier containing the R5FSS device id value.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
+
+# Optional properties:
+# --------------------
+
+ ti,cluster-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Configuration Mode for the Dual R5F cores within the R5F cluster.
+ Should be either a value of 1 (LockStep mode) or 0 (Split mode),
+ default is LockStep mode if omitted.
+
+# R5F Processor Child Nodes:
+# ==========================
+
+patternProperties:
+ "^r5f@[a-f0-9]+$":
+ type: object
+ description: |
+ The R5F Sub-System device node should define two R5F child nodes, each
+ node representing a TI instantiation of the Arm Cortex R5F core. There
+ are some specific integration differences for the IP like the usage of
+ a Region Address Translator (RAT) for translating the larger SoC bus
+ addresses into a 32-bit address space for the processor.
+
+ Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
+ internal memories split between two banks - TCMA and TCMB (further
+ interleaved into two banks TCMB0 and TCMB1). These memories (also called
+ ATCM and BTCM) provide read/write performance on par with the core's L1
+ caches. Each of the TCMs can be enabled or disabled independently and
+ either of them can be configured to appear at that R5F's address 0x0.
+
+ The cores do not use an MMU, but has a Region Address Translater
+ (RAT) module that is accessible only from the R5Fs for providing
+ translations between 32-bit CPU addresses into larger system bus
+ addresses. Cache and memory access settings are provided through a
+ Memory Protection Unit (MPU), programmable only from the R5Fs.
+
+ allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - ti,am654-r5f
+ - ti,j721e-r5f
+
+ reg:
+ items:
+ - description: Address and Size of the ATCM internal memory region
+ - description: Address and Size of the BTCM internal memory region
+
+ reg-names:
+ items:
+ - const: atcm
+ - const: btcm
+
+ resets:
+ description: |
+ Should contain the phandle to the reset controller node managing the
+ local resets for this device, and a reset specifier.
+ maxItems: 1
+
+ firmware-name:
+ description: |
+ Should contain the name of the default firmware image
+ file located on the firmware search path
+
+# The following properties are mandatory for R5F Core0 in both LockStep and Split
+# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for
+# R5F Core1 in LockStep mode:
+
+ mboxes:
+ description: |
+ OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+ communication with the remote processor. This property should match
+ with the sub-mailbox node used in the firmware image.
+ maxItems: 1
+
+ memory-region:
+ description: |
+ phandle to the reserved memory nodes to be associated with the
+ remoteproc device. There should be at least two reserved memory nodes
+ defined. The reserved memory nodes should be carveout nodes, and
+ should be defined with a "no-map" property as per the bindings in
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+ minItems: 2
+ maxItems: 8
+ items:
+ - description: region used for dynamic DMA allocations like vrings and
+ vring buffers
+ - description: region reserved for firmware image sections
+ additionalItems: true
+
+
+# Optional properties:
+# --------------------
+# The following properties are optional properties for each of the R5F cores:
+
+ ti,atcm-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ R5F core configuration mode dictating if ATCM should be enabled. The
+ R5F address of ATCM is dictated by ti,loczrama property. Should be
+ either a value of 1 (enabled) or 0 (disabled), default is disabled
+ if omitted. Recommended to enable it for maximizing TCMs.
+
+ ti,btcm-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ R5F core configuration mode dictating if BTCM should be enabled. The
+ R5F address of BTCM is dictated by ti,loczrama property. Should be
+ either a value of 1 (enabled) or 0 (disabled), default is enabled if
+ omitted.
+
+ ti,loczrama:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ R5F core configuration mode dictating which TCM should appear at
+ address 0 (from core's view). Should be either a value of 1 (ATCM
+ at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted.
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 4
+ description: |
+ phandles to one or more reserved on-chip SRAM regions. The regions
+ should be defined as child nodes of the respective SRAM node, and
+ should be defined as per the generic bindings in,
+ Documentation/devicetree/bindings/sram/sram.yaml
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ / {
+ model = "Texas Instruments K3 AM654 SoC";
+ compatible = "ti,am654-evm", "ti,am654";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ bus@100000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>;
+
+ bus@28380000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */
+
+ /* AM65x MCU R5FSS node */
+ mcu_r5fss0: r5fss@41000000 {
+ compatible = "ti,am654-r5fss";
+ power-domains = <&k3_pds 129>;
+ ti,cluster-mode = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x41000000 0x00 0x41000000 0x20000>,
+ <0x41400000 0x00 0x41400000 0x20000>;
+
+ mcu_r5f0: r5f@41000000 {
+ compatible = "ti,am654-r5f";
+ reg = <0x41000000 0x00008000>,
+ <0x41010000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <159>;
+ ti,sci-proc-ids = <0x01 0xFF>;
+ resets = <&k3_reset 159 1>;
+ firmware-name = "am65x-mcu-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ sram = <&mcu_r5fss0_core0_sram>;
+ };
+
+ mcu_r5f1: r5f@41400000 {
+ compatible = "ti,am654-r5f";
+ reg = <0x41400000 0x00008000>,
+ <0x41410000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <245>;
+ ti,sci-proc-ids = <0x02 0xFF>;
+ resets = <&k3_reset 245 1>;
+ firmware-name = "am65x-mcu-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>;
+ };
+ };
+ };
+ };
+ };