Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - Move Dmaengine DT bindings to YAML and convert Allwinner to schema.

 - FSL dma device_synchronize implementation

 - DW split acpi and of helpers and updates to driver and support for
   Elkhart Lake

 - Move filter fn as private for omap-dma and edma drivers and
   improvements to these drivers

 - Mark expected switch fall-through in couple of drivers

 - Renames of shdma and nbpfaxi binding document

 - Minor updates to bunch of drivers

* tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits)
  dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  dmaengine: ti: edma: Only reset region0 access registers
  dmaengine: ti: edma: Do not reset reserved paRAM slots
  dmaengine: iop-adma.c: fix printk format warning
  dmaengine: stm32-dma: Use struct_size() helper
  dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property
  dmanegine: ioat/dca: Use struct_size() helper
  dmaengine: iop-adma: remove set but not used variable 'slots_per_op'
  dmaengine: dmatest: Add support for completion polling
  dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  dmaengine: ti: edma: Remove 'Assignment in if condition'
  dmaengine: dw: platform: Split OF helpers to separate module
  dmaengine: dw: platform: Split ACPI helpers to separate module
  dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register()
  dmaengine: dw: platform: Switch to acpi_dma_controller_register()
  dmaengine: dw: platform: Use devm_platform_ioremap_resource()
  dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw: platform: Use struct dw_dma_chip_pdata
  dmaengine: dw: Export struct dw_dma_chip_pdata for wider use
  ...

11 files changed, 336 insertions, 239 deletions

diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
new file mode 100644
index 000000000000..15abc0f9429f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DMA Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 2
+    description:
+      The first cell is either 0 or 1, the former to use the normal
+      DMA, 1 for dedicated DMA. The second cell is the request line
+      number.
+
+  compatible:
+    const: allwinner,sun4i-a10-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun4i-a10-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <27>;
+        clocks = <&ahb_gates 6>;
+        #dma-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
new file mode 100644
index 000000000000..4cb9d6b93138
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 DMA Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    enum:
+      - allwinner,sun50i-a64-dma
+      - allwinner,sun50i-h6-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mbus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - dma-channels
+
+if:
+  properties:
+    compatible:
+      const: allwinner,sun50i-h6-dma
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun50i-a64-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ccu 30>;
+        dma-channels = <8>;
+        dma-requests = <27>;
+        resets = <&ccu 7>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
new file mode 100644
index 000000000000..740b7f9b535b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 DMA Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-dma
+      - const: allwinner,sun8i-a23-dma
+      - const: allwinner,sun8i-a83t-dma
+      - const: allwinner,sun8i-h3-dma
+      - const: allwinner,sun8i-v3s-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun6i-a31-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ahb1_gates 6>;
+        resets = <&ahb1_rst 6>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
new file mode 100644
index 000000000000..ed0a49a6f020
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Engine Generic Binding
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  Generic binding to provide a way for a driver using DMA Engine to
+  retrieve the DMA request or channel information that goes from a
+  hardware device to a DMA controller.
+
+select: false
+
+properties:
+  "#dma-cells":
+    minimum: 1
+    # Should be enough
+    maximum: 255
+    description:
+      Used to provide DMA controller specific information.
+
+  dma-channel-mask:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Bitmask of available DMA channels in ascending order that are
+      not reserved by firmware and are available to the
+      kernel. i.e. first channel corresponds to LSB.
+
+  dma-channels:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Number of DMA channels supported by the controller.
+
+  dma-requests:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Number of DMA request signals supported by the controller.
+
+required:
+  - "#dma-cells"
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
new file mode 100644
index 000000000000..c39f6de76670
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Controller Generic Binding
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: "dma-common.yaml#"
+
+# Everything else is described in the common file
+properties:
+  $nodename:
+    pattern: "^dma-controller(@.*)?$"
+
+examples:
+  - |
+    dma: dma-controller@48000000 {
+        compatible = "ti,omap-sdma";
+        reg = <0x48000000 0x1000>;
+        interrupts = <0 12 0x4
+                      0 13 0x4
+                      0 14 0x4
+                      0 15 0x4>;
+        #dma-cells = <1>;
+        dma-channels = <32>;
+        dma-requests = <127>;
+        dma-channel-mask = <0xfffe>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
new file mode 100644
index 000000000000..5b5f07393135
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-router.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Router Generic Binding
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: "dma-common.yaml#"
+
+description:
+  DMA routers are transparent IP blocks used to route DMA request
+  lines from devices to the DMA controller. Some SoCs (like TI DRA7x)
+  have more peripherals integrated with DMA requests than what the DMA
+  controller can handle directly.
+
+properties:
+  $nodename:
+    pattern: "^dma-router(@.*)?$"
+
+  dma-masters:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description:
+      Array of phandles to the DMA controllers the router can direct
+      the signal to.
+
+  dma-requests:
+    description:
+      Number of incoming request lines the router can handle.
+
+required:
+  - "#dma-cells"
+  - dma-masters
+
+examples:
+  - |
+    sdma_xbar: dma-router@4a002b78 {
+        compatible = "ti,dra7-dma-crossbar";
+        reg = <0x4a002b78 0xfc>;
+        #dma-cells = <1>;
+        dma-requests = <205>;
+        ti,dma-safe-map = <0>;
+        dma-masters = <&sdma>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt
index eeb4e4d1771e..90a67a016a48 100644
--- a/Documentation/devicetree/bindings/dma/dma.txt
+++ b/Documentation/devicetree/bindings/dma/dma.txt
@@ -1,113 +1 @@
-* Generic DMA Controller and DMA request bindings
-
-Generic binding to provide a way for a driver using DMA Engine to retrieve the
-DMA request or channel information that goes from a hardware device to a DMA
-controller.
-
-
-* DMA controller
-
-Required property:
-- #dma-cells: 		Must be at least 1. Used to provide DMA controller
-			specific information. See DMA client binding below for
-			more details.
-
-Optional properties:
-- dma-channels: 	Number of DMA channels supported by the controller.
-- dma-requests: 	Number of DMA request signals supported by the
-			controller.
-- dma-channel-mask:	Bitmask of available DMA channels in ascending order
-			that are not reserved by firmware and are available to
-			the kernel. i.e. first channel corresponds to LSB.
-
-Example:
-
-	dma: dma@48000000 {
-		compatible = "ti,omap-sdma";
-		reg = <0x48000000 0x1000>;
-		interrupts = <0 12 0x4
-			      0 13 0x4
-			      0 14 0x4
-			      0 15 0x4>;
-		#dma-cells = <1>;
-		dma-channels = <32>;
-		dma-requests = <127>;
-		dma-channel-mask = <0xfffe>
-	};
-
-* DMA router
-
-DMA routers are transparent IP blocks used to route DMA request lines from
-devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals
-integrated with DMA requests than what the DMA controller can handle directly.
-
-Required property:
-- dma-masters:		phandle of the DMA controller or list of phandles for
-			the DMA controllers the router can direct the signal to.
-- #dma-cells: 		Must be at least 1. Used to provide DMA router specific
-			information. See DMA client binding below for more
-			details.
-
-Optional properties:
-- dma-requests: 	Number of incoming request lines the router can handle.
-- In the node pointed by the dma-masters:
-	- dma-requests:	The router driver might need to look for this in order
-			to configure the routing.
-
-Example:
-	sdma_xbar: dma-router@4a002b78 {
-		compatible = "ti,dra7-dma-crossbar";
-		reg = <0x4a002b78 0xfc>;
-		#dma-cells = <1>;
-		dma-requests = <205>;
-		ti,dma-safe-map = <0>;
-		dma-masters = <&sdma>;
-	};
-
-* DMA client
-
-Client drivers should specify the DMA property using a phandle to the controller
-followed by DMA controller specific data.
-
-Required property:
-- dmas:			List of one or more DMA specifiers, each consisting of
-			- A phandle pointing to DMA controller node
-			- A number of integer cells, as determined by the
-			  #dma-cells property in the node referenced by phandle
-			  containing DMA controller specific information. This
-			  typically contains a DMA request line number or a
-			  channel number, but can contain any data that is
-			  required for configuring a channel.
-- dma-names: 		Contains one identifier string for each DMA specifier in
-			the dmas property. The specific strings that can be used
-			are defined in the binding of the DMA client device.
-			Multiple DMA specifiers can be used to represent
-			alternatives and in this case the dma-names for those
-			DMA specifiers must be identical (see examples).
-
-Examples:
-
-1. A device with one DMA read channel, one DMA write channel:
-
-	i2c1: i2c@1 {
-		...
-		dmas = <&dma 2		/* read channel */
-			&dma 3>;	/* write channel */
-		dma-names = "rx", "tx";
-		...
-	};
-
-2. A single read-write channel with three alternative DMA controllers:
-
-	dmas = <&dma1 5
-		&dma2 7
-		&dma3 2>;
-	dma-names = "rx-tx", "rx-tx", "rx-tx";
-
-3. A device with three channels, one of which has two alternatives:
-
-	dmas = <&dma1 2			/* read channel */
-		&dma1 3			/* write channel */
-		&dma2 0			/* error read */
-		&dma3 0>;		/* alternative error read */
-	dma-names = "rx", "tx", "error", "error";
+This file has been moved to dma-controller.yaml.
diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
index d2e1e62e346a..d2e1e62e346a 100644
--- a/Documentation/devicetree/bindings/dma/nbpfaxi.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/renesas,shdma.txt
index a91920a49433..a91920a49433 100644
--- a/Documentation/devicetree/bindings/dma/shdma.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,shdma.txt
diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
deleted file mode 100644
index 8ad556aca70b..000000000000
--- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Allwinner A10 DMA Controller
-
-This driver follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-
-- compatible:	Must be "allwinner,sun4i-a10-dma"
-- reg:		Should contain the registers base address and length
-- interrupts:	Should contain a reference to the interrupt used by this device
-- clocks:	Should contain a reference to the parent AHB clock
-- #dma-cells :	Should be 2, first cell denoting normal or dedicated dma,
-		second cell holding the request line number.
-
-Example:
-	dma: dma-controller@1c02000 {
-		compatible = "allwinner,sun4i-a10-dma";
-		reg = <0x01c02000 0x1000>;
-		interrupts = <27>;
-		clocks = <&ahb_gates 6>;
-		#dma-cells = <2>;
-	};
-
-Clients:
-
-DMA clients connected to the Allwinner A10 DMA controller must use the
-format described in the dma.txt file, using a three-cell specifier for
-each channel: a phandle plus two integer cells.
-The three cells in order are:
-
-1. A phandle pointing to the DMA controller.
-2. Whether it is using normal (0) or dedicated (1) channels
-3. The port ID as specified in the datasheet
-
-Example:
-	spi2: spi@1c17000 {
-		compatible = "allwinner,sun4i-a10-spi";
-		reg = <0x01c17000 0x1000>;
-		interrupts = <0 12 4>;
-		clocks = <&ahb_gates 22>, <&spi2_clk>;
-		clock-names = "ahb", "mod";
-		dmas = <&dma 1 29>, <&dma 1 28>;
-		dma-names = "rx", "tx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
deleted file mode 100644
index cae31f4e77ba..000000000000
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Allwinner A31 DMA Controller
-
-This driver follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "allwinner,sun6i-a31-dma"
-		  "allwinner,sun8i-a23-dma"
-		  "allwinner,sun8i-a83t-dma"
-		  "allwinner,sun8i-h3-dma"
-		  "allwinner,sun8i-v3s-dma"
-- reg:		Should contain the registers base address and length
-- interrupts:	Should contain a reference to the interrupt used by this device
-- clocks:	Should contain a reference to the parent AHB clock
-- resets:	Should contain a reference to the reset controller asserting
-		this device in reset
-- #dma-cells :	Should be 1, a single cell holding a line request number
-
-Example:
-	dma: dma-controller@1c02000 {
-		compatible = "allwinner,sun6i-a31-dma";
-		reg = <0x01c02000 0x1000>;
-		interrupts = <0 50 4>;
-		clocks = <&ahb1_gates 6>;
-		resets = <&ahb1_rst 6>;
-		#dma-cells = <1>;
-	};
-
-------------------------------------------------------------------------------
-For A64 and H6 DMA controller:
-
-Required properties:
-- compatible:	Must be one of
-		  "allwinner,sun50i-a64-dma"
-		  "allwinner,sun50i-h6-dma"
-- dma-channels: Number of DMA channels supported by the controller.
-		Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks:	In addition to parent AHB clock, it should also contain mbus
-		clock (H6 only)
-- clock-names:	Should contain "bus" and "mbus" (H6 only)
-- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells
-
-Optional properties:
-- dma-requests: Number of DMA request signals supported by the controller.
-		Refer to Documentation/devicetree/bindings/dma/dma.txt
-
-Example:
-	dma: dma-controller@1c02000 {
-		compatible = "allwinner,sun50i-a64-dma";
-		reg = <0x01c02000 0x1000>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&ccu CLK_BUS_DMA>;
-		dma-channels = <8>;
-		dma-requests = <27>;
-		resets = <&ccu RST_BUS_DMA>;
-		#dma-cells = <1>;
-	};
-------------------------------------------------------------------------------
-
-Clients:
-
-DMA clients connected to the A31 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each
-channel: a phandle plus one integer cells.
-The two cells in order are:
-
-1. A phandle pointing to the DMA controller.
-2. The port ID as specified in the datasheet
-
-Example:
-spi2: spi@1c6a000 {
-	compatible = "allwinner,sun6i-a31-spi";
-	reg = <0x01c6a000 0x1000>;
-	interrupts = <0 67 4>;
-	clocks = <&ahb1_gates 22>, <&spi2_clk>;
-	clock-names = "ahb", "mod";
-	dmas = <&dma 25>, <&dma 25>;
-	dma-names = "rx", "tx";
-	resets = <&ahb1_rst 22>;
-};