diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-03 06:20:12 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-03 06:20:12 +0300 |
| commit | f5a8eb632b562bd9c16c389f5db3a5260fba4157 (patch) | |
| tree | 82687234d772ff8f72a31e598fe16553885c56c9 /Documentation | |
| parent | c9297d284126b80c9cfd72c690e0da531c99fc48 (diff) | |
| parent | dd3b8c329aa270027fba61a02a12600972dc3983 (diff) | |
| download | linux-f5a8eb632b562bd9c16c389f5db3a5260fba4157.tar.xz | |
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
Diffstat (limited to 'Documentation')
75 files changed, 4 insertions, 2910 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 7f3a0728ccf2..708dc4c166e4 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -66,8 +66,6 @@ backlight/ - directory with info on controlling backlights in flat panel displays bcache.txt - Block-layer cache on fast SSDs to improve slow (raid) I/O performance. -blackfin/ - - directory with documentation for the Blackfin arch. block/ - info on the Block I/O (BIO) layer. blockdev/ @@ -114,8 +112,6 @@ cputopology.txt - documentation on how CPU topology info is exported via sysfs. crc32.txt - brief tutorial on CRC computation -cris/ - - directory with info about Linux on CRIS architecture. crypto/ - directory with info on the Crypto API. dcdbas.txt @@ -172,8 +168,6 @@ fmc/ - information about the FMC bus abstraction fpga/ - FPGA Manager Core. -frv/ - - Fujitsu FR-V Linux documentation. futex-requeue-pi.txt - info on requeueing of tasks from a non-PI futex to a PI futex gcc-plugins.txt @@ -276,8 +270,6 @@ memory-hotplug.txt - Hotpluggable memory support, how to use and current status. men-chameleon-bus.txt - info on MEN chameleon bus. -metag/ - - directory with info about Linux on Meta architecture. mic/ - Intel Many Integrated Core (MIC) architecture device driver. mips/ @@ -286,8 +278,6 @@ misc-devices/ - directory with info about devices using the misc dev subsystem mmc/ - directory with info about the MMC subsystem -mn10300/ - - directory with info about the mn10300 architecture port mtd/ - directory with info about memory technology devices (flash) namespaces/ diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index af5a437198d0..155372b3b57f 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -26,8 +26,8 @@ On what hardware does it run? Although originally developed first for 32-bit x86-based PCs (386 or higher), today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, - IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - Xtensa, Tilera TILE, ARC and Renesas M32R architectures. + IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64 Xtensa, and + ARC architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index 7242cbda15dd..b8d0bc07ed0a 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -89,7 +89,6 @@ parameter is applicable:: APM Advanced Power Management support is enabled. ARM ARM architecture is enabled. AX25 Appropriate AX.25 support is enabled. - BLACKFIN Blackfin architecture is enabled. CLK Common clock infrastructure is enabled. CMA Contiguous Memory Area support is enabled. DRM Direct Rendering Management support is enabled. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b37c1c30c16f..bf03fe49f1ce 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1025,7 +1025,7 @@ address. The serial port must already be setup and configured. Options are not yet supported. - earlyprintk= [X86,SH,BLACKFIN,ARM,M68k,S390] + earlyprintk= [X86,SH,ARM,M68k,S390] earlyprintk=vga earlyprintk=efi earlyprintk=sclp @@ -1347,10 +1347,6 @@ If specified, z/VM IUCV HVC accepts connections from listed z/VM user IDs only. - hwthread_map= [METAG] Comma-separated list of Linux cpu id to - hardware thread id mappings. - Format: <cpu>:<hwthread> - keep_bootcon [KNL] Do not unregister boot console at start. This is only useful for debugging when something happens in the window diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX deleted file mode 100644 index 265a1effebde..000000000000 --- a/Documentation/blackfin/00-INDEX +++ /dev/null @@ -1,6 +0,0 @@ -00-INDEX - - This file -bfin-gpio-notes.txt - - Notes in developing/using bfin-gpio driver. -bfin-spi-notes.txt - - Notes for using bfin spi bus driver. diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt deleted file mode 100644 index d245f39c3d01..000000000000 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ /dev/null @@ -1,71 +0,0 @@ -/* - * File: Documentation/blackfin/bfin-gpio-notes.txt - * Based on: - * Author: - * - * Created: $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $ - * Description: This file contains the notes in developing/using bfin-gpio. - * - * - * Rev: - * - * Modified: - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - */ - - -1. Blackfin GPIO introduction - - There are many GPIO pins on Blackfin. Most of these pins are muxed to - multi-functions. They can be configured as peripheral, or just as GPIO, - configured to input with interrupt enabled, or output. - - For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c", - or the relevant HRM. - - -2. Avoiding resource conflict - - Followed function groups are used to avoiding resource conflict, - - Use the pin as peripheral, - int peripheral_request(unsigned short per, const char *label); - int peripheral_request_list(const unsigned short per[], const char *label); - void peripheral_free(unsigned short per); - void peripheral_free_list(const unsigned short per[]); - - Use the pin as GPIO, - int bfin_gpio_request(unsigned gpio, const char *label); - void bfin_gpio_free(unsigned gpio); - - Use the pin as GPIO interrupt, - int bfin_gpio_irq_request(unsigned gpio, const char *label); - void bfin_gpio_irq_free(unsigned gpio); - - The request functions will record the function state for a certain pin, - the free functions will clear its function state. - Once a pin is requested, it can't be requested again before it is freed by - previous caller, otherwise kernel will dump stacks, and the request - function fail. - These functions are wrapped by other functions, most of the users need not - care. - - -3. But there are some exceptions - - Kernel permit the identical GPIO be requested both as GPIO and GPIO - interrupt. - Some drivers, like gpio-keys, need this behavior. Kernel only print out - warning messages like, - bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are -configuring it as IRQ! - - Note: Consider the case that, if there are two drivers need the - identical GPIO, one of them use it as GPIO, the other use it as - GPIO interrupt. This will really cause resource conflict. So if - there is any abnormal driver behavior, please check the bfin-gpio - warning messages. - - - Kernel permit the identical GPIO be requested from the same driver twice. - - - diff --git a/Documentation/blackfin/bfin-spi-notes.txt b/Documentation/blackfin/bfin-spi-notes.txt deleted file mode 100644 index eae6eaf2a09d..000000000000 --- a/Documentation/blackfin/bfin-spi-notes.txt +++ /dev/null @@ -1,16 +0,0 @@ -SPI Chip Select behavior: - -With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA -bit whether the Slave Select Line is controlled by hardware (CPHA=0) or -controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that -the Slave Select is always under software control and being asserted during -the entire SPI transfer. - And not just bits_per_word duration. - -In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this -behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2 -timing, you can utilize the GPIO controlled SPI Slave Select option instead. -In this case, you should use GPIO based CS for all of your slaves and not just -the ones using mode 0 or 2 in order to guarantee correct CS toggling behavior. - -You can even use the same pin whose peripheral role is a SSEL, -but use it as a GPIO instead. diff --git a/Documentation/cris/README b/Documentation/cris/README deleted file mode 100644 index 8dbdb1a44429..000000000000 --- a/Documentation/cris/README +++ /dev/null @@ -1,195 +0,0 @@ -Linux on the CRIS architecture -============================== - -This is a port of Linux to Axis Communications ETRAX 100LX, -ETRAX FS and ARTPEC-3 embedded network CPUs. - -For more information about CRIS and ETRAX please see further below. - -In order to compile this you need a version of gcc with support for the -ETRAX chip family. Please see this link for more information on how to -download the compiler and other tools useful when building and booting -software for the ETRAX platform: - -http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20 - -What is CRIS ? --------------- - -CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU -architecture in Axis Communication AB's range of embedded network CPU's, -called ETRAX. - -The ETRAX 100LX chip --------------------- - -For reference, please see the following link: - -http://www.axis.com/products/dev_etrax_100lx/index.htm - -The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad -range of built-in interfaces, all with modern scatter/gather DMA. - -Memory interfaces: - - * SRAM - * NOR-flash/ROM - * EDO or page-mode DRAM - * SDRAM - -I/O interfaces: - - * one 10/100 Mbit/s ethernet controller - * four serial-ports (up to 6 Mbit/s) - * two synchronous serial-ports for multimedia codec's etc. - * USB host controller and USB slave - * ATA - * SCSI - * two parallel-ports - * two generic 8-bit ports - - (not all interfaces are available at the same time due to chip pin - multiplexing) - -ETRAX 100LX is CRISv10 architecture. - - -The ETRAX FS and ARTPEC-3 chips -------------------------------- - -The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB -I-cache and 16kB D-cache and with a wide range of device interfaces -including multiple high speed serial ports and an integrated USB 1.1 PHY. - -The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units -used by the Axis Communications network cameras. - -See below link for more information: - -http://www.axis.com/products/dev_etrax_fs/index.htm - -ETRAX FS and ARTPEC-3 are both CRISv32 architectures. - -Bootlog -------- - -Just as an example, this is the debug-output from a boot of Linux 2.4 on -a board with ETRAX 100LX. The displayed BogoMIPS value is 5 times too small :) -At the end you see some user-mode programs booting like telnet and ftp daemons. - -Linux version 2.4.1 (bjornw@godzilla.axis.se) (gcc version 2.96 20000427 (experimental)) #207 Wed Feb 21 15:48:15 CET 2001 -ROM fs in RAM, size 1376256 bytes -Setting up paging and the MMU. -On node 0 totalpages: 2048 -zone(0): 2048 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB -Kernel command line: -Calibrating delay loop... 19.91 BogoMIPS -Memory: 13872k/16384k available (587k kernel code, 2512k reserved, 44k data, 24k init) -kmem_create: Forcing size word alignment - vm_area_struct -kmem_create: Forcing size word alignment - filp -Dentry-cache hash table entries: 2048 (order: 1, 16384 bytes) -Buffer-cache hash table entries: 2048 (order: 0, 8192 bytes) -Page-cache hash table entries: 2048 (order: 0, 8192 bytes) -kmem_create: Forcing size word alignment - kiobuf -kmem_create: Forcing size word alignment - bdev_cache -Inode-cache hash table entries: 1024 (order: 0, 8192 bytes) -kmem_create: Forcing size word alignment - inode_cache -POSIX conformance testing by UNIFIX -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Starting kswapd v1.8 -kmem_create: Forcing size word alignment - file lock cache -kmem_create: Forcing size word alignment - blkdev_requests -block: queued sectors max/low 9109kB/3036kB, 64 slots per queue -ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000 Axis Communications AB -eth0 initialized -eth0: changed MAC to 00:40:8C:CD:00:00 -ETRAX 100LX serial-driver $Revision: 1.7 $, (c) 2000 Axis Communications AB -ttyS0 at 0xb0000060 is a builtin UART with DMA -ttyS1 at 0xb0000068 is a builtin UART with DMA -ttyS2 at 0xb0000070 is a builtin UART with DMA -ttyS3 at 0xb0000078 is a builtin UART with DMA -Axis flash mapping: 200000 at 50000000 -Axis flash: Found 1 x16 CFI device at 0x0 in 16 bit mode - Amd/Fujitsu Extended Query Table v1.0 at 0x0040 -Axis flash: JEDEC Device ID is 0xC4. Assuming broken CFI table. -Axis flash: Swapping erase regions for broken CFI table. -number of CFI chips: 1 - Using default partition table -I2C driver v2.2, (c) 1999-2001 Axis Communications AB -ETRAX 100LX GPIO driver v2.1, (c) 2001 Axis Communications AB -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP -kmem_create: Forcing size word alignment - ip_dst_cache -IP: routing cache hash table of 1024 buckets, 8Kbytes -TCP: Hash tables configured (established 2048 bind 2048) -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -VFS: Mounted root (cramfs filesystem) readonly. -Init starts up... -Mounted none on /proc ok. -Setting up eth0 with ip 10.13.9.116 and mac 00:40:8c:18:04:60 -eth0: changed MAC to 00:40:8C:18:04:60 -Setting up lo with ip 127.0.0.1 -Default gateway is 10.13.9.1 -Hostname is bbox1 -Telnetd starting, using port 23. - using /bin/sash as shell. -sftpd[15]: sftpd $Revision: 1.7 $ starting up - - - -And here is how some /proc entries look: - -17# cd /proc -17# cat cpuinfo -cpu : CRIS -cpu revision : 10 -cpu model : ETRAX 100LX -cache size : 8 kB -fpu : no -mmu : yes -ethernet : 10/100 Mbps -token ring : no -scsi : yes -ata : yes -usb : yes -bogomips : 99.84 - -17# cat meminfo - total: used: free: shared: buffers: cached: -Mem: 7028736 925696 6103040 114688 0 229376 -Swap: 0 0 0 -MemTotal: 6864 kB -MemFree: 5960 kB -MemShared: 112 kB -Buffers: 0 kB -Cached: 224 kB -Active: 224 kB -Inact_dirty: 0 kB -Inact_clean: 0 kB -Inact_target: 0 kB -HighTotal: 0 kB -HighFree: 0 kB -LowTotal: 6864 kB -LowFree: 5960 kB -SwapTotal: 0 kB -SwapFree: 0 kB -17# ls -l /bin --rwxr-xr-x 1 342 100 10356 Jan 01 00:00 ifconfig --rwxr-xr-x 1 342 100 17548 Jan 01 00:00 init --rwxr-xr-x 1 342 100 9488 Jan 01 00:00 route --rwxr-xr-x 1 342 100 46036 Jan 01 00:00 sftpd --rwxr-xr-x 1 342 100 48104 Jan 01 00:00 sh --rwxr-xr-x 1 342 100 16252 Jan 01 00:00 telnetd - - - - - - - - - diff --git a/Documentation/dev-tools/kmemleak.rst b/Documentation/dev-tools/kmemleak.rst index cb8862659178..e6f51260ff32 100644 --- a/Documentation/dev-tools/kmemleak.rst +++ b/Documentation/dev-tools/kmemleak.rst @@ -8,7 +8,7 @@ with the difference that the orphan objects are not freed but only reported via /sys/kernel/debug/kmemleak. A similar method is used by the Valgrind tool (``memcheck --leak-check``) to detect the memory leaks in user-space applications. -Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390, metag and tile. +Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390 and tile. Usage ----- diff --git a/Documentation/devicetree/bindings/cris/axis.txt b/Documentation/devicetree/bindings/cris/axis.txt deleted file mode 100644 index d209ca2a47c0..000000000000 --- a/Documentation/devicetree/bindings/cris/axis.txt +++ /dev/null @@ -1,9 +0,0 @@ -Axis Communications AB -ARTPEC series SoC Device Tree Bindings - - -CRISv32 based SoCs are ETRAX FS and ARTPEC-3: - - - compatible = "axis,crisv32"; - - diff --git a/Documentation/devicetree/bindings/cris/boards.txt b/Documentation/devicetree/bindings/cris/boards.txt deleted file mode 100644 index 533dd273ccf7..000000000000 --- a/Documentation/devicetree/bindings/cris/boards.txt +++ /dev/null @@ -1,8 +0,0 @@ -Boards based on the CRIS SoCs: - -Required root node properties: - - compatible = should be one or more of the following: - - "axis,dev88" - for Axis devboard 88 with ETRAX FS - -Optional: - diff --git a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt deleted file mode 100644 index 170194af3027..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt +++ /dev/null @@ -1,22 +0,0 @@ -Axis ETRAX FS General I/O controller bindings - -Required properties: - -- compatible: one of: - - "axis,etraxfs-gio" - - "axis,artpec3-gio" -- reg: Physical base address and length of the controller's registers. -- #gpio-cells: Should be 3 - - The first cell is the gpio offset number. - - The second cell is reserved and is currently unused. - - The third cell is the port number (hex). -- gpio-controller: Marks the device node as a GPIO controller. - -Example: - - gio: gpio@b001a000 { - compatible = "axis,etraxfs-gio"; - reg = <0xb001a000 0x1000>; - gpio-controller; - #gpio-cells = <3>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt deleted file mode 100644 index e8b123b0a5e6..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt +++ /dev/null @@ -1,23 +0,0 @@ -* CRISv32 Interrupt Controller - -Interrupt controller for the CRISv32 SoCs. - -Main node required properties: - -- compatible : should be: - "axis,crisv32-intc" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a <u32> and the value shall be 1. -- reg: physical base address and size of the intc registers map. - -Example: - - intc: interrupt-controller { - compatible = "axis,crisv32-intc"; - reg = <0xb001c000 0x1000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - diff --git a/Documentation/devicetree/bindings/metag/meta.txt b/Documentation/devicetree/bindings/metag/meta.txt deleted file mode 100644 index f4457f57ab08..000000000000 --- a/Documentation/devicetree/bindings/metag/meta.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Meta Processor Binding - -This binding specifies what properties must be available in the device tree -representation of a Meta Processor Core, which is the root node in the tree. - -Required properties: - - - compatible: Specifies the compatibility list for the Meta processor. - The type shall be <string> and the value shall include "img,meta". - -Optional properties: - - - clocks: Clock consumer specifiers as described in - Documentation/devicetree/bindings/clock/clock-bindings.txt - - - clock-names: Clock consumer names as described in - Documentation/devicetree/bindings/clock/clock-bindings.txt. - -Clocks are identified by name. Valid clocks are: - - - "core": The Meta core clock from which the Meta timers are derived. - -* Examples - -/ { - compatible = "toumaz,tz1090", "img,meta"; - - clocks = <&meta_core_clk>; - clock-names = "core"; -}; diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt deleted file mode 100644 index 048c3818c826..000000000000 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ /dev/null @@ -1,22 +0,0 @@ -ETRAX FS UART - -Required properties: -- compatible : "axis,etraxfs-uart" -- reg: offset and length of the register set for the device. -- interrupts: device interrupt - -Optional properties: -- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD - line respectively. - -Example: - -serial@b00260000 { - compatible = "axis,etraxfs-uart"; - reg = <0xb0026000 0x1000>; - interrupts = <68>; - dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; - dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; - rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; - dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/driver-api/usb/writing_musb_glue_layer.rst b/Documentation/driver-api/usb/writing_musb_glue_layer.rst index e90e8fa95600..5bf7152fd76f 100644 --- a/Documentation/driver-api/usb/writing_musb_glue_layer.rst +++ b/Documentation/driver-api/usb/writing_musb_glue_layer.rst @@ -718,6 +718,3 @@ http://www.maximintegrated.com/app-notes/index.mvp/id/1822 Texas Instruments USB Configuration Wiki Page: http://processors.wiki.ti.com/index.php/Usbgeneralpage - -Analog Devices Blackfin MUSB Configuration: -http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb diff --git a/Documentation/features/core/BPF-JIT/arch-support.txt b/Documentation/features/core/BPF-JIT/arch-support.txt index 5575d2d09625..0b96b4e1e7d4 100644 --- a/Documentation/features/core/BPF-JIT/arch-support.txt +++ b/Documentation/features/core/BPF-JIT/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index abb5f271a792..372a2b18a617 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | ok | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | ok | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index dbdaffcc5110..ad97217b003b 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index dfb638c2f842..36ee7bef5d18 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | ok | - | cris: | TODO | - | frv: | ok | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | ok | | microblaze: | TODO | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | ok | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 3406fae833c3..f5c99fa576d3 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | 64-bit only diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 830dbe801aaf..5170a9934843 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | ok | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 0217bf6e942d..13b6e994ae1f 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 1e84be3c142e..419bb38820e7 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index 529f66eda679..52b3ace0a030 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 43353242e439..180d24419518 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index f559f1ba5416..0a1241f45e41 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index 59a4c9ffb7f3..570019572383 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | ok | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index 53ed42b0e7e5..0b8d922eb799 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 149443936de9..13852ae62e9e 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/io/dma-api-debug/arch-support.txt b/Documentation/features/io/dma-api-debug/arch-support.txt index 6be920643be6..e438ed675623 100644 --- a/Documentation/features/io/dma-api-debug/arch-support.txt +++ b/Documentation/features/io/dma-api-debug/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | ok | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 0eb08e1e32b8..47f64a433df0 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/io/sg-chain/arch-support.txt b/Documentation/features/io/sg-chain/arch-support.txt index 514ad3468aa5..07f357fadbff 100644 --- a/Documentation/features/io/sg-chain/arch-support.txt +++ b/Documentation/features/io/sg-chain/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/lib/strncasecmp/arch-support.txt b/Documentation/features/lib/strncasecmp/arch-support.txt index 532c6f0fc15c..4f3a6a0e4e68 100644 --- a/Documentation/features/lib/strncasecmp/arch-support.txt +++ b/Documentation/features/lib/strncasecmp/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index f3eec26c8cf8..482a0b09d1f8 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index 9756abc680a7..bb35c5ba6286 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | ok | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | ok | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | ok | | unicore32: | ok | | x86: | ok | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index 62f4ee5c156c..627e9a6b2db9 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 321b32f6e63c..9edda216cdfb 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/locking/rwsem-optimized/arch-support.txt b/Documentation/features/locking/rwsem-optimized/arch-support.txt index 79bfa4d6e41f..8d9afb10b16e 100644 --- a/Documentation/features/locking/rwsem-optimized/arch-support.txt +++ b/Documentation/features/locking/rwsem-optimized/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 00f1606bbf45..d01239ee34b3 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | TODO | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index 7d516eacf7b9..458faba5311a 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index f974b8df5d82..545d01c69c88 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index 2c815a7f1ba7..85a6c9d4571c 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -33,28 +33,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index 1d3c0f669152..347508863872 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -10,28 +10,20 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | blackfin: | .. | | c6x: | .. | - | cris: | .. | - | frv: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | - | m32r: | .. | | m68k: | .. | - | metag: | .. | | microblaze: | .. | | mips: | TODO | - | mn10300: | .. | | nios2: | .. | | openrisc: | .. | | parisc: | .. | | powerpc: | ok | | s390: | .. | - | score: | .. | | sh: | .. | | sparc: | TODO | - | tile: | TODO | | um: | .. | | unicore32: | .. | | x86: | ok | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index a32d5b207679..e4fad58a05e5 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | ok | | um: | ok | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index caee8f64d1bc..8052904b25fc 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index 1cd87f6cd07d..7c76b946297e 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | ok | - | cris: | ok | - | frv: | TODO | | h8300: | ok | | hexagon: | ok | | ia64: | TODO | - | m32r: | TODO | | m68k: | ok | - | metag: | ok | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | ok | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | ok | | unicore32: | ok | | x86: | ok | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index e6d7c7b2253c..9433b3e523b3 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 15c6071788ae..212dde0b578c 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | .. | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | .. | | powerpc: | .. | | s390: | .. | - | score: | TODO | | sh: | TODO | | sparc: | .. | - | tile: | .. | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt index baee7611ba3d..4074028f72f7 100644 --- a/Documentation/features/time/modern-timekeeping/arch-support.txt +++ b/Documentation/features/time/modern-timekeeping/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | ok | - | cris: | TODO | - | frv: | ok | | h8300: | ok | | hexagon: | ok | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | ok | | microblaze: | ok | | mips: | ok | - | mn10300: | ok | | nios2: | ok | | openrisc: | ok | | parisc: | ok | | powerpc: | ok | | s390: | ok | - | score: | ok | | sh: | ok | | sparc: | ok | - | tile: | ok | | um: | ok | | unicore32: | ok | | x86: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index 9129530cb73c..a394d8820517 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | ok | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | ok | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index f6829af3255f..082f93d5b40e 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | ok | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 1a09ea99d486..605e0abb756d 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index d170e6236503..7a8eb0bd5ca8 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | .. | | c6x: | .. | - | cris: | .. | - | frv: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | - | m32r: | .. | | m68k: | .. | - | metag: | TODO | | microblaze: | .. | | mips: | ok | - | mn10300: | .. | | nios2: | .. | | openrisc: | .. | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | .. | | sh: | .. | | sparc: | ok | - | tile: | TODO | | um: | .. | | unicore32: | .. | | x86: | ok | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index abfab4080a91..35fb99b2b3ea 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | .. | - | cris: | .. | - | frv: | .. | | h8300: | .. | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | .. | - | metag: | TODO | | microblaze: | .. | | mips: | TODO | - | mn10300: | TODO | | nios2: | .. | | openrisc: | .. | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | .. | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | .. | | unicore32: | .. | | x86: | ok | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index f81f09b22b08..ed8b943ad8fc 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -10,28 +10,20 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | TODO | | s390: | TODO | - | score: | TODO | | sh: | TODO | | sparc: | TODO | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 0cc3e11c42e2..589947bdf0a8 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | TODO | - | score: | TODO | | sh: | ok | | sparc: | TODO | - | tile: | ok | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt index 9a3fdac42ce1..8b8bea0318a0 100644 --- a/Documentation/features/vm/numa-memblock/arch-support.txt +++ b/Documentation/features/vm/numa-memblock/arch-support.txt @@ -10,28 +10,20 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | blackfin: | .. | | c6x: | .. | - | cris: | .. | - | frv: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | ok | - | m32r: | TODO | | m68k: | .. | - | metag: | ok | | microblaze: | ok | | mips: | ok | - | mn10300: | TODO | | nios2: | .. | | openrisc: | .. | | parisc: | .. | | powerpc: | ok | | s390: | ok | - | score: | ok | | sh: | ok | | sparc: | ok | - | tile: | TODO | | um: | .. | | unicore32: | .. | | x86: | ok | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index dfaa39e664ff..055004f467d2 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -10,28 +10,20 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | - | cris: | TODO | - | frv: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | - | m32r: | TODO | | m68k: | TODO | - | metag: | TODO | | microblaze: | TODO | | mips: | TODO | - | mn10300: | TODO | | nios2: | TODO | | openrisc: | TODO | | parisc: | TODO | | powerpc: | ok | | s390: | ok | - | score: | TODO | | sh: | ok | | sparc: | ok | - | tile: | TODO | | um: | TODO | | unicore32: | TODO | | x86: | ok | diff --git a/Documentation/frv/README.txt b/Documentation/frv/README.txt deleted file mode 100644 index a984faa968e8..000000000000 --- a/Documentation/frv/README.txt +++ /dev/null @@ -1,51 +0,0 @@ - ================================ - Fujitsu FR-V LINUX DOCUMENTATION - ================================ - -This directory contains documentation for the Fujitsu FR-V CPU architecture -port of Linux. - -The following documents are available: - - (*) features.txt - - A description of the basic features inherent in this architecture port. - - - (*) configuring.txt - - A summary of the configuration options particular to this architecture. - - - (*) booting.txt - - A description of how to boot the kernel image and a summary of the kernel - command line options. - - - (*) gdbstub.txt - - A description of how to debug the kernel using GDB attached by serial - port, and a summary of the services available. - - - (*) mmu-layout.txt - - A description of the virtual and physical memory layout used in the - MMU linux kernel, and the registers used to support it. - - - (*) gdbinit - - An example .gdbinit file for use with GDB. It includes macros for viewing - MMU state on the FR451. See mmu-layout.txt for more information. - - - (*) clock.txt - - A description of the CPU clock scaling interface. - - - (*) atomic-ops.txt - - A description of how the FR-V kernel's atomic operations work. diff --git a/Documentation/frv/atomic-ops.txt b/Documentation/frv/atomic-ops.txt deleted file mode 100644 index 96638e9b9fe0..000000000000 --- a/Documentation/frv/atomic-ops.txt +++ /dev/null @@ -1,134 +0,0 @@ - ===================================== - FUJITSU FR-V KERNEL ATOMIC OPERATIONS - ===================================== - -On the FR-V CPUs, there is only one atomic Read-Modify-Write operation: the SWAP/SWAPI -instruction. Unfortunately, this alone can't be used to implement the following operations: - - (*) Atomic add to memory - - (*) Atomic subtract from memory - - (*) Atomic bit modification (set, clear or invert) - - (*) Atomic compare and exchange - -On such CPUs, the standard way of emulating such operations in uniprocessor mode is to disable -interrupts, but on the FR-V CPUs, modifying the PSR takes a lot of clock cycles, and it has to be -done twice. This means the CPU runs for a relatively long time with interrupts disabled, -potentially having a great effect on interrupt latency. - - -============= -NEW ALGORITHM -============= - -To get around this, the following algorithm has been implemented. It operates in a way similar to -the LL/SC instruction pairs supported on a number of platforms. - - (*) The CCCR.CC3 register is reserved within the kernel to act as an atomic modify abort flag. - - (*) In the exception prologues run on kernel->kernel entry, CCCR.CC3 is set to 0 (Undefined - state). - - (*) All atomic operations can then be broken down into the following algorithm: - - (1) Set ICC3.Z to true and set CC3 to True (ORCC/CKEQ/ORCR). - - (2) Load the value currently in the memory to be modified into a register. - - (3) Make changes to the value. - - (4) If CC3 is still True, simultaneously and atomically (by VLIW packing): - - (a) Store the modified value back to memory. - - (b) Set ICC3.Z to false (CORCC on GR29 is sufficient for this - GR29 holds the current - task pointer in the kernel, and so is guaranteed to be non-zero). - - (5) If ICC3.Z is still true, go back to step (1). - -This works in a non-SMP environment because any interrupt or other exception that happens between -steps (1) and (4) will set CC3 to the Undefined, thus aborting the store in (4a), and causing the -condition in ICC3 to remain with the Z flag set, thus causing step (5) to loop back to step (1). - - -This algorithm suffers from two problems: - - (1) The condition CCCR.CC3 is cleared unconditionally by an exception, irrespective of whether or - not any changes were made to the target memory location during that exception. - - (2) The branch from step (5) back to step (1) may have to happen more than once until the store - manages to take place. In theory, this loop could cycle forever because there are too many - interrupts coming in, but it's unlikely. - - -======= -EXAMPLE -======= - -Taking an example from include/asm-frv/atomic.h: - - static inline int atomic_add_return(int i, atomic_t *v) - { - unsigned long val; - - asm("0: \n" - -It starts by setting ICC3.Z to true for later use, and also transforming that into CC3 being in the -True state. - - " orcc gr0,gr0,gr0,icc3 \n" <-- (1) - " ckeq icc3,cc7 \n" <-- (1) - -Then it does the load. Note that the final phase of step (1) is done at the same time as the -load. The VLIW packing ensures they are done simultaneously. The ".p" on the load must not be -removed without swapping the order of these two instructions. - - " ld.p %M0,%1 \n" <-- (2) - " orcr cc7,cc7,cc3 \n" <-- (1) - -Then the proposed modification is generated. Note that the old value can be retained if required -(such as in test_and_set_bit()). - - " add%I2 %1,%2,%1 \n" <-- (3) - -Then it attempts to store the value back, contingent on no exception having cleared CC3 since it -was set to True. - - " cst.p %1,%M0 ,cc3,#1 \n" <-- (4a) - -It simultaneously records the success or failure of the store in ICC3.Z. - - " corcc gr29,gr29,gr0 ,cc3,#1 \n" <-- (4b) - -Such that the branch can then be taken if the operation was aborted. - - " beq icc3,#0,0b \n" <-- (5) - : "+U"(v->counter), "=&r"(val) - : "NPr"(i) - : "memory", "cc7", "cc3", "icc3" - ); - - return val; - } - - -============= -CONFIGURATION -============= - -The atomic ops implementation can be made inline or out-of-line by changing the -CONFIG_FRV_OUTOFLINE_ATOMIC_OPS configuration variable. Making it out-of-line has a number of -advantages: - - - The resulting kernel image may be smaller - - Debugging is easier as atomic ops can just be stepped over and they can be breakpointed - -Keeping it inline also has a number of advantages: - - - The resulting kernel may be Faster - - no out-of-line function calls need to be made - - the compiler doesn't have half its registers clobbered by making a call - -The out-of-line implementations live in arch/frv/lib/atomic-ops.S. diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt deleted file mode 100644 index cd9dc1dfb144..000000000000 --- a/Documentation/frv/booting.txt +++ /dev/null @@ -1,182 +0,0 @@ - ========================= - BOOTING FR-V LINUX KERNEL - ========================= - -====================== -PROVIDING A FILESYSTEM -====================== - -First of all, a root filesystem must be made available. This can be done in -one of two ways: - - (1) NFS Export - - A filesystem should be constructed in a directory on an NFS server that - the target board can reach. This directory should then be NFS exported - such that the target board can read and write into it as root. - - (2) Flash Filesystem (JFFS2 Recommended) - - In this case, the image must be stored or built up on flash before it - can be used. A complete image can be built using the mkfs.jffs2 or - similar program and then downloaded and stored into flash by RedBoot. - - -======================== -LOADING THE KERNEL IMAGE -======================== - -The kernel will need to be loaded into RAM by RedBoot (or by some alternative -boot loader) before it can be run. The kernel image (arch/frv/boot/Image) may -be loaded in one of three ways: - - (1) Load from Flash - - This is the simplest. RedBoot can store an image in the flash (see the - RedBoot documentation) and then load it back into RAM. RedBoot keeps - track of the load address, entry point and size, so the command to do - this is simply: - - fis load linux - - The image is then ready to be executed. - - (2) Load by TFTP - - The following command will download a raw binary kernel image from the - default server (as negotiated by BOOTP) and store it into RAM: - - load -b 0x00100000 -r /tftpboot/image.bin - - The image is then ready to be executed. - - (3) Load by Y-Modem - - The following command will download a raw binary kernel image across the - serial port that RedBoot is currently using: - - load -m ymodem -b 0x00100000 -r zImage - - The serial client (such as minicom) must then be told to transmit the - program by Y-Modem. - - When finished, the image will then be ready to be executed. - - -================== -BOOTING THE KERNEL -================== - -Boot the image with the following RedBoot command: - - exec -c "<CMDLINE>" 0x00100000 - -For example: - - exec -c "console=ttySM0,115200 ip=:::::dhcp root=/dev/mtdblock2 rw" - -This will start the kernel running. Note that if the GDB-stub is compiled in, -then the kernel will immediately wait for GDB to connect over serial before -doing anything else. See the section on kernel debugging with GDB. - -The kernel command line <CMDLINE> tells the kernel where its console is and -how to find its root filesystem. This is made up of the following components, -separated by spaces: - - (*) console=ttyS<x>[,<baud>[<parity>[<bits>[<flow>]]]] - - This specifies that the system console should output through on-chip - serial port <x> (which can be "0" or "1"). - - <baud> is a standard baud rate between 1200 and 115200 (default 9600). - - <parity> is a parity setting of "N", "O", "E", "M" or "S" for None, Odd, - Even, Mark or Space. "None" is the default. - - <stop> is "7" or "8" for the number of bits per character. "8" is the - default. - - <flow> is "r" to use flow control (XCTS on serial port 2 only). The - default is to not use flow control. - - For example: - - console=ttyS0,115200 - - To use the first on-chip serial port at baud rate 115200, no parity, 8 - bits, and no flow control. - - (*) root=<xxxx> - - This specifies the device upon which the root filesystem resides. It - may be specified by major and minor number, device path, or even - partition uuid, if supported. For example: - - /dev/nfs NFS root filesystem - /dev/mtdblock3 Fourth RedBoot partition on the System Flash - PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=1 - first partition after the partition with the given UUID - 253:0 Device with major 253 and minor 0 - - Authoritative information can be found in - "Documentation/admin-guide/kernel-parameters.rst". - - (*) rw - - Start with the root filesystem mounted Read/Write. - - The remaining components are all optional: - - (*) ip=<ip>::::<host>:<iface>:<cfg> - - Configure the network interface. If <cfg> is "off" then <ip> should - specify the IP address for the network device <iface>. <host> provide - the hostname for the device. - - If <cfg> is "bootp" or "dhcp", then all of these parameters will be - discovered by consulting a BOOTP or DHCP server. - - For example, the following might be used: - - ip=192.168.73.12::::frv:eth0:off - - This sets the IP address on the VDK motherboard RTL8029 ethernet chipset - (eth0) to be 192.168.73.12, and sets the board's hostname to be "frv". - - (*) nfsroot=<server>:<dir>[,v<vers>] - - This is mandatory if "root=/dev/nfs" is given as an option. It tells the - kernel the IP address of the NFS server providing its root filesystem, - and the pathname on that server of the filesystem. - - The NFS version to use can also be specified. v2 and v3 are supported by - Linux. - - For example: - - nfsroot=192.168.73.1:/nfsroot-frv - - (*) profile=1 - - Turns on the kernel profiler (accessible through /proc/profile). - - (*) console=gdb0 - - This can be used as an alternative to the "console=ttyS..." listed - above. I tells the kernel to pass the console output to GDB if the - gdbstub is compiled in to the kernel. - - If this is used, then the gdbstub passes the text to GDB, which then - simply dumps it to its standard output. - - (*) mem=<xxx>M - - Normally the kernel will work out how much SDRAM it has by reading the - SDRAM controller registers. That can be overridden with this - option. This allows the kernel to be told that it has <xxx> megabytes of - memory available. - - (*) init=<prog> [<arg> [<arg> [<arg> ...]]] - - This tells the kernel what program to run initially. By default this is - /sbin/init, but /sbin/sash or /bin/sh are common alternatives. diff --git a/Documentation/frv/clock.txt b/Documentation/frv/clock.txt deleted file mode 100644 index c72d350e177a..000000000000 --- a/Documentation/frv/clock.txt +++ /dev/null @@ -1,65 +0,0 @@ -Clock scaling -------------- - -The kernel supports scaling of CLCK.CMODE, CLCK.CM and CLKC.P0 clock -registers. If built with CONFIG_PM and CONFIG_SYSCTL options enabled, four -extra files will appear in the directory /proc/sys/pm/. Reading these files -will show: - - p0 -- current value of the P0 bit in CLKC register. - cm -- current value of the CM bits in CLKC register. - cmode -- current value of the CMODE bits in CLKC register. - -On all boards, the 'p0' file should also be writable, and either '1' or '0' -can be rewritten, to set or clear the CLKC_P0 bit respectively, hence -controlling whether the resource bus rate clock is halved. - -The 'cm' file should also be available on all boards. '0' can be written to it -to shift the board into High-Speed mode (normal), and '1' can be written to -shift the board into Medium-Speed mode. Selecting Low-Speed mode is not -supported by this interface, even though some CPUs do support it. - -On the boards with FR405 CPU (i.e. CB60 and CB70), the 'cmode' file is also -writable, allowing the CPU core speed (and other clock speeds) to be -controlled from userspace. - - -Determining current and possible settings ------------------------------------------ - -The current state and the available masks can be found in /proc/cpuinfo. For -example, on the CB70: - - # cat /proc/cpuinfo - CPU-Series: fr400 - CPU-Core: fr405, gr0-31, BE, CCCR - CPU: mb93405 - MMU: Prot - FP-Media: fr0-31, Media - System: mb93091-cb70, mb93090-mb00 - PM-Controls: cmode=0xd31f, cm=0x3, p0=0x3, suspend=0x9 - PM-Status: cmode=3, cm=0, p0=0 - Clock-In: 50.00 MHz - Clock-Core: 300.00 MHz - Clock-SDRAM: 100.00 MHz - Clock-CBus: 100.00 MHz - Clock-Res: 50.00 MHz - Clock-Ext: 50.00 MHz - Clock-DSU: 25.00 MHz - BogoMips: 300.00 - -And on the PDK, the PM lines look like the following: - - PM-Controls: cm=0x3, p0=0x3, suspend=0x9 - PM-Status: cmode=9, cm=0, p0=0 - -The PM-Controls line, if present, will indicate which /proc/sys/pm files can -be set to what values. The specification values are bitmasks; so, for example, -"suspend=0x9" indicates that 0 and 3 can be written validly to -/proc/sys/pm/suspend. - -The PM-Controls line will only be present if CONFIG_PM is configured to Y. - -The PM-Status line indicates which clock controls are set to which value. If -the file can be read, then the suspend value must be 0, and so that's not -included. diff --git a/Documentation/frv/configuring.txt b/Documentation/frv/configuring.txt deleted file mode 100644 index 36e76a2336fa..000000000000 --- a/Documentation/frv/configuring.txt +++ /dev/null @@ -1,125 +0,0 @@ - ======================================= - FUJITSU FR-V LINUX KERNEL CONFIGURATION - ======================================= - -===================== -CONFIGURATION OPTIONS -===================== - -The most important setting is in the "MMU support options" tab (the first -presented in the configuration tools available): - - (*) "Kernel Type" - - This options allows selection of normal, MMU-requiring linux, and uClinux - (which doesn't require an MMU and doesn't have inter-process protection). - -There are a number of settings in the "Processor type and features" section of -the kernel configuration that need to be considered. - - (*) "CPU" - - The register and instruction sets at the core of the processor. This can - only be set to "FR40x/45x/55x" at the moment - but this permits usage of - the kernel with MB93091 CB10, CB11, CB30, CB41, CB60, CB70 and CB451 - CPU boards, and with the MB93093 PDK board. - - (*) "System" - - This option allows a choice of basic system. This governs the peripherals - that are expected to be available. - - (*) "Motherboard" - - This specifies the type of motherboard being used, and the peripherals - upon it. Currently only "MB93090-MB00" can be set here. - - (*) "Default cache-write mode" - - This controls the initial data cache write management mode. By default - Write-Through is selected, but Write-Back (Copy-Back) can also be - selected. This can be changed dynamically once the kernel is running (see - features.txt). - -There are some architecture specific configuration options in the "General -Setup" section of the kernel configuration too: - - (*) "Reserve memory uncached for (PCI) DMA" - - This requests that a uClinux kernel set aside some memory in an uncached - window for the use as consistent DMA memory (mainly for PCI). At least a - megabyte will be allocated in this way, possibly more. Any memory so - reserved will not be available for normal allocations. - - (*) "Kernel support for ELF-FDPIC binaries" - - This enables the binary-format driver for the new FDPIC ELF binaries that - this platform normally uses. These binaries are totally relocatable - - their separate sections can relocated independently, allowing them to be - shared on uClinux where possible. This should normally be enabled. - - (*) "Kernel image protection" - - This makes the protection register governing access to the core kernel - image prohibit access by userspace programs. This option is available on - uClinux only. - -There are also a number of settings in the "Kernel Hacking" section of the -kernel configuration especially for debugging a kernel on this -architecture. See the "gdbstub.txt" file for information about those. - - -====================== -DEFAULT CONFIGURATIONS -====================== - -The kernel sources include a number of example default configurations: - - (*) defconfig-mb93091 - - Default configuration for the MB93091-VDK with both CPU board and - MB93090-MB00 motherboard running uClinux. - - - (*) defconfig-mb93091-fb - - Default configuration for the MB93091-VDK with CPU board, - MB93090-MB00 motherboard, and DAV board running uClinux. - Includes framebuffer driver. - - - (*) defconfig-mb93093 - - Default configuration for the MB93093-PDK board running uClinux. - - - (*) defconfig-cb70-standalone - - Default configuration for the MB93091-VDK with only CB70 CPU board - running uClinux. This will use the CB70's DM9000 for network access. - - - (*) defconfig-mmu - - Default configuration for the MB93091-VDK with both CB451 CPU board and - MB93090-MB00 motherboard running MMU linux. - - (*) defconfig-mmu-audio - - Default configuration for the MB93091-VDK with CB451 CPU board, DAV - board, and MB93090-MB00 motherboard running MMU linux. Includes - audio driver. - - (*) defconfig-mmu-fb - - Default configuration for the MB93091-VDK with CB451 CPU board, DAV - board, and MB93090-MB00 motherboard running MMU linux. Includes - framebuffer driver. - - (*) defconfig-mmu-standalone - - Default configuration for the MB93091-VDK with only CB451 CPU board - running MMU linux. - - - diff --git a/Documentation/frv/features.txt b/Documentation/frv/features.txt deleted file mode 100644 index fa20c0e72833..000000000000 --- a/Documentation/frv/features.txt +++ /dev/null @@ -1,310 +0,0 @@ - =========================== - FUJITSU FR-V LINUX FEATURES - =========================== - -This kernel port has a number of features of which the user should be aware: - - (*) Linux and uClinux - - The FR-V architecture port supports both normal MMU linux and uClinux out - of the same sources. - - - (*) CPU support - - Support for the FR401, FR403, FR405, FR451 and FR555 CPUs should work with - the same uClinux kernel configuration. - - In normal (MMU) Linux mode, only the FR451 CPU will work as that is the - only one with a suitably featured CPU. - - The kernel is written and compiled with the assumption that only the - bottom 32 GR registers and no FR registers will be used by the kernel - itself, however all extra userspace registers will be saved on context - switch. Note that since most CPUs can't support lazy switching, no attempt - is made to do lazy register saving where that would be possible (FR555 - only currently). - - - (*) Board support - - The board on which the kernel will run can be configured on the "Processor - type and features" configuration tab. - - Set the System to "MB93093-PDK" to boot from the MB93093 (FR403) PDK. - - Set the System to "MB93091-VDK" to boot from the CB11, CB30, CB41, CB60, - CB70 or CB451 VDK boards. Set the Motherboard setting to "MB93090-MB00" to - boot with the standard ATA90590B VDK motherboard, and set it to "None" to - boot without any motherboard. - - - (*) Binary Formats - - The only userspace binary format supported is FDPIC ELF. Normal ELF, FLAT - and AOUT binaries are not supported for this architecture. - - FDPIC ELF supports shared library and program interpreter facilities. - - - (*) Scheduler Speed - - The kernel scheduler runs at 100Hz irrespective of the clock speed on this - architecture. This value is set in asm/param.h (see the HZ macro defined - there). - - - (*) Normal (MMU) Linux Memory Layout. - - See mmu-layout.txt in this directory for a description of the normal linux - memory layout - - See include/asm-frv/mem-layout.h for constants pertaining to the memory - layout. - - See include/asm-frv/mb-regs.h for the constants pertaining to the I/O bus - controller configuration. - - - (*) uClinux Memory Layout - - The memory layout used by the uClinux kernel is as follows: - - 0x00000000 - 0x00000FFF Null pointer catch page - 0x20000000 - 0x200FFFFF CS2# [PDK] FPGA - 0xC0000000 - 0xCFFFFFFF SDRAM - 0xC0000000 Base of Linux kernel image - 0xE0000000 - 0xEFFFFFFF CS2# [VDK] SLBUS/PCI window - 0xF0000000 - 0xF0FFFFFF CS5# MB93493 CSC area (DAV daughter board) - 0xF1000000 - 0xF1FFFFFF CS7# [CB70/CB451] CPU-card PCMCIA port space - 0xFC000000 - 0xFC0FFFFF CS1# [VDK] MB86943 config space - 0xFC100000 - 0xFC1FFFFF CS6# [CB70/CB451] CPU-card DM9000 NIC space - 0xFC100000 - 0xFC1FFFFF CS6# [PDK] AX88796 NIC space - 0xFC200000 - 0xFC2FFFFF CS3# MB93493 CSR area (DAV daughter board) - 0xFD000000 - 0xFDFFFFFF CS4# [CB70/CB451] CPU-card extra flash space - 0xFE000000 - 0xFEFFFFFF Internal CPU peripherals - 0xFF000000 - 0xFF1FFFFF CS0# Flash 1 - 0xFF200000 - 0xFF3FFFFF CS0# Flash 2 - 0xFFC00000 - 0xFFC0001F CS0# [VDK] FPGA - - The kernel reads the size of the SDRAM from the memory bus controller - registers by default. - - The kernel initialisation code (1) adjusts the SDRAM base addresses to - move the SDRAM to desired address, (2) moves the kernel image down to the - bottom of SDRAM, (3) adjusts the bus controller registers to move I/O - windows, and (4) rearranges the protection registers to protect all of - this. - - The reasons for doing this are: (1) the page at address 0 should be - inaccessible so that NULL pointer errors can be caught; and (2) the bottom - three quarters are left unoccupied so that an FR-V CPU with an MMU can use - it for virtual userspace mappings. - - See include/asm-frv/mem-layout.h for constants pertaining to the memory - layout. - - See include/asm-frv/mb-regs.h for the constants pertaining to the I/O bus - controller configuration. - - - (*) uClinux Memory Protection - - A DAMPR register is used to cover the entire region used for I/O - (0xE0000000 - 0xFFFFFFFF). This permits the kernel to make uncached - accesses to this region. Userspace is not permitted to access it. - - The DAMPR/IAMPR protection registers not in use for any other purpose are - tiled over the top of the SDRAM such that: - - (1) The core kernel image is covered by as small a tile as possible - granting only the kernel access to the underlying data, whilst - making sure no SDRAM is actually made unavailable by this approach. - - (2) All other tiles are arranged to permit userspace access to the rest - of the SDRAM. - - Barring point (1), there is nothing to protect kernel data against - userspace damage - but this is uClinux. - - - (*) Exceptions and Fixups - - Since the FR40x and FR55x CPUs that do not have full MMUs generate - imprecise data error exceptions, there are currently no automatic fixup - services available in uClinux. This includes misaligned memory access - fixups. - - Userspace EFAULT errors can be trapped by issuing a MEMBAR instruction and - forcing the fault to happen there. - - On the FR451, however, data exceptions are mostly precise, and so - exception fixup handling is implemented as normal. - - - (*) Userspace Breakpoints - - The ptrace() system call supports the following userspace debugging - features: - - (1) Hardware assisted single step. - - (2) Breakpoint via the FR-V "BREAK" instruction. - - (3) Breakpoint via the FR-V "TIRA GR0, #1" instruction. - - (4) Syscall entry/exit trap. - - Each of the above generates a SIGTRAP. - - - (*) On-Chip Serial Ports - - The FR-V on-chip serial ports are made available as ttyS0 and ttyS1. Note - that if the GDB stub is compiled in, ttyS1 will not actually be available - as it will be being used for the GDB stub. - - These ports can be made by: - - mknod /dev/ttyS0 c 4 64 - mknod /dev/ttyS1 c 4 65 - - - (*) Maskable Interrupts - - Level 15 (Non-maskable) interrupts are dealt with by the GDB stub if - present, and cause a panic if not. If the GDB stub is present, ttyS1's - interrupts are rated at level 15. - - All other interrupts are distributed over the set of available priorities - so that no IRQs are shared where possible. The arch interrupt handling - routines attempt to disentangle the various sources available through the - CPU's own multiplexor, and those on off-CPU peripherals. - - - (*) Accessing PCI Devices - - Where PCI is available, care must be taken when dealing with drivers that - access PCI devices. PCI devices present their data in little-endian form, - but the CPU sees it in big-endian form. The macros in asm/io.h try to get - this right, but may not under all circumstances... - - - (*) Ax88796 Ethernet Driver - - The MB93093 PDK board has an Ax88796 ethernet chipset (an NE2000 clone). A - driver has been written to deal specifically with this. The driver - provides MII services for the card. - - The driver can be configured by running make xconfig, and going to: - - (*) Network device support - - turn on "Network device support" - (*) Ethernet (10 or 100Mbit) - - turn on "Ethernet (10 or 100Mbit)" - - turn on "AX88796 NE2000 compatible chipset" - - The driver can be found in: - - drivers/net/ax88796.c - include/asm/ax88796.h - - - (*) WorkRAM Driver - - This driver provides a character device that permits access to the WorkRAM - that can be found on the FR451 CPU. Each page is accessible through a - separate minor number, thereby permitting each page to have its own - filesystem permissions set on the device file. - - The device files should be: - - mknod /dev/frv/workram0 c 240 0 - mknod /dev/frv/workram1 c 240 1 - mknod /dev/frv/workram2 c 240 2 - ... - - The driver will not permit the opening of any device file that does not - correspond to at least a partial page of WorkRAM. So the first device file - is the only one available on the FR451. If any other CPU is detected, none - of the devices will be openable. - - The devices can be accessed with read, write and llseek, and can also be - mmapped. If they're mmapped, they will only map at the appropriate - 0x7e8nnnnn address on linux and at the 0xfe8nnnnn address on uClinux. If - MAP_FIXED is not specified, the appropriate address will be chosen anyway. - - The mappings must be MAP_SHARED not MAP_PRIVATE, and must not be - PROT_EXEC. They must also start at file offset 0, and must not be longer - than one page in size. - - This driver can be configured by running make xconfig, and going to: - - (*) Character devices - - turn on "Fujitsu FR-V CPU WorkRAM support" - - - (*) Dynamic data cache write mode changing - - It is possible to view and to change the data cache's write mode through - the /proc/sys/frv/cache-mode file while the kernel is running. There are - two modes available: - - NAME MEANING - ===== ========================================== - wthru Data cache is in Write-Through mode - wback Data cache is in Write-Back/Copy-Back mode - - To read the cache mode: - - # cat /proc/sys/frv/cache-mode - wthru - - To change the cache mode: - - # echo wback >/proc/sys/frv/cache-mode - # cat /proc/sys/frv/cache-mode - wback - - - (*) MMU Context IDs and Pinning - - On MMU Linux the CPU supports the concept of a context ID in its MMU to - make it more efficient (TLB entries are labelled with a context ID to link - them to specific tasks). - - Normally once a context ID is allocated, it will remain affixed to a task - or CLONE_VM'd group of tasks for as long as it exists. However, since the - kernel is capable of supporting more tasks than there are possible ID - numbers, the kernel will pass context IDs from one task to another if - there are insufficient available. - - The context ID currently in use by a task can be viewed in /proc: - - # grep CXNR /proc/1/status - CXNR: 1 - - Note that kernel threads do not have a userspace context, and so will not - show a CXNR entry in that file. - - Under some circumstances, however, it is desirable to pin a context ID on - a process such that the kernel won't pass it on. This can be done by - writing the process ID of the target process to a special file: - - # echo 17 >/proc/sys/frv/pin-cxnr - - Reading from the file will then show the context ID pinned. - - # cat /proc/sys/frv/pin-cxnr - 4 - - The context ID will remain pinned as long as any process is using that - context, i.e.: when the all the subscribing processes have exited or - exec'd; or when an unpinning request happens: - - # echo 0 >/proc/sys/frv/pin-cxnr - - When there isn't a pinned context, the file shows -1: - - # cat /proc/sys/frv/pin-cxnr - -1 diff --git a/Documentation/frv/gdbinit b/Documentation/frv/gdbinit deleted file mode 100644 index 51517b6f307f..000000000000 --- a/Documentation/frv/gdbinit +++ /dev/null @@ -1,102 +0,0 @@ -set remotebreak 1 - -define _amr - -printf "AMRx DAMR IAMR \n" -printf "==== ===================== =====================\n" -printf "amr0 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x0].L,__debug_mmu.damr[0x0].P,__debug_mmu.iamr[0x0].L,__debug_mmu.iamr[0x0].P -printf "amr1 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x1].L,__debug_mmu.damr[0x1].P,__debug_mmu.iamr[0x1].L,__debug_mmu.iamr[0x1].P -printf "amr2 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x2].L,__debug_mmu.damr[0x2].P,__debug_mmu.iamr[0x2].L,__debug_mmu.iamr[0x2].P -printf "amr3 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x3].L,__debug_mmu.damr[0x3].P,__debug_mmu.iamr[0x3].L,__debug_mmu.iamr[0x3].P -printf "amr4 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x4].L,__debug_mmu.damr[0x4].P,__debug_mmu.iamr[0x4].L,__debug_mmu.iamr[0x4].P -printf "amr5 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x5].L,__debug_mmu.damr[0x5].P,__debug_mmu.iamr[0x5].L,__debug_mmu.iamr[0x5].P -printf "amr6 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x6].L,__debug_mmu.damr[0x6].P,__debug_mmu.iamr[0x6].L,__debug_mmu.iamr[0x6].P -printf "amr7 : L:%08lx P:%08lx : L:%08lx P:%08lx\n",__debug_mmu.damr[0x7].L,__debug_mmu.damr[0x7].P,__debug_mmu.iamr[0x7].L,__debug_mmu.iamr[0x7].P - -printf "amr8 : L:%08lx P:%08lx\n",__debug_mmu.damr[0x8].L,__debug_mmu.damr[0x8].P -printf "amr9 : L:%08lx P:%08lx\n",__debug_mmu.damr[0x9].L,__debug_mmu.damr[0x9].P -printf "amr10: L:%08lx P:%08lx\n",__debug_mmu.damr[0xa].L,__debug_mmu.damr[0xa].P -printf "amr11: L:%08lx P:%08lx\n",__debug_mmu.damr[0xb].L,__debug_mmu.damr[0xb].P - -end - - -define _tlb -printf "tlb[0x00]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x0].L,__debug_mmu.tlb[0x0].P,__debug_mmu.tlb[0x40+0x0].L,__debug_mmu.tlb[0x40+0x0].P -printf "tlb[0x01]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1].L,__debug_mmu.tlb[0x1].P,__debug_mmu.tlb[0x40+0x1].L,__debug_mmu.tlb[0x40+0x1].P -printf "tlb[0x02]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2].L,__debug_mmu.tlb[0x2].P,__debug_mmu.tlb[0x40+0x2].L,__debug_mmu.tlb[0x40+0x2].P -printf "tlb[0x03]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3].L,__debug_mmu.tlb[0x3].P,__debug_mmu.tlb[0x40+0x3].L,__debug_mmu.tlb[0x40+0x3].P -printf "tlb[0x04]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x4].L,__debug_mmu.tlb[0x4].P,__debug_mmu.tlb[0x40+0x4].L,__debug_mmu.tlb[0x40+0x4].P -printf "tlb[0x05]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x5].L,__debug_mmu.tlb[0x5].P,__debug_mmu.tlb[0x40+0x5].L,__debug_mmu.tlb[0x40+0x5].P -printf "tlb[0x06]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x6].L,__debug_mmu.tlb[0x6].P,__debug_mmu.tlb[0x40+0x6].L,__debug_mmu.tlb[0x40+0x6].P -printf "tlb[0x07]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x7].L,__debug_mmu.tlb[0x7].P,__debug_mmu.tlb[0x40+0x7].L,__debug_mmu.tlb[0x40+0x7].P -printf "tlb[0x08]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x8].L,__debug_mmu.tlb[0x8].P,__debug_mmu.tlb[0x40+0x8].L,__debug_mmu.tlb[0x40+0x8].P -printf "tlb[0x09]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x9].L,__debug_mmu.tlb[0x9].P,__debug_mmu.tlb[0x40+0x9].L,__debug_mmu.tlb[0x40+0x9].P -printf "tlb[0x0a]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xa].L,__debug_mmu.tlb[0xa].P,__debug_mmu.tlb[0x40+0xa].L,__debug_mmu.tlb[0x40+0xa].P -printf "tlb[0x0b]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xb].L,__debug_mmu.tlb[0xb].P,__debug_mmu.tlb[0x40+0xb].L,__debug_mmu.tlb[0x40+0xb].P -printf "tlb[0x0c]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xc].L,__debug_mmu.tlb[0xc].P,__debug_mmu.tlb[0x40+0xc].L,__debug_mmu.tlb[0x40+0xc].P -printf "tlb[0x0d]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xd].L,__debug_mmu.tlb[0xd].P,__debug_mmu.tlb[0x40+0xd].L,__debug_mmu.tlb[0x40+0xd].P -printf "tlb[0x0e]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xe].L,__debug_mmu.tlb[0xe].P,__debug_mmu.tlb[0x40+0xe].L,__debug_mmu.tlb[0x40+0xe].P -printf "tlb[0x0f]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0xf].L,__debug_mmu.tlb[0xf].P,__debug_mmu.tlb[0x40+0xf].L,__debug_mmu.tlb[0x40+0xf].P -printf "tlb[0x10]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x10].L,__debug_mmu.tlb[0x10].P,__debug_mmu.tlb[0x40+0x10].L,__debug_mmu.tlb[0x40+0x10].P -printf "tlb[0x11]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x11].L,__debug_mmu.tlb[0x11].P,__debug_mmu.tlb[0x40+0x11].L,__debug_mmu.tlb[0x40+0x11].P -printf "tlb[0x12]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x12].L,__debug_mmu.tlb[0x12].P,__debug_mmu.tlb[0x40+0x12].L,__debug_mmu.tlb[0x40+0x12].P -printf "tlb[0x13]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x13].L,__debug_mmu.tlb[0x13].P,__debug_mmu.tlb[0x40+0x13].L,__debug_mmu.tlb[0x40+0x13].P -printf "tlb[0x14]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x14].L,__debug_mmu.tlb[0x14].P,__debug_mmu.tlb[0x40+0x14].L,__debug_mmu.tlb[0x40+0x14].P -printf "tlb[0x15]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x15].L,__debug_mmu.tlb[0x15].P,__debug_mmu.tlb[0x40+0x15].L,__debug_mmu.tlb[0x40+0x15].P -printf "tlb[0x16]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x16].L,__debug_mmu.tlb[0x16].P,__debug_mmu.tlb[0x40+0x16].L,__debug_mmu.tlb[0x40+0x16].P -printf "tlb[0x17]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x17].L,__debug_mmu.tlb[0x17].P,__debug_mmu.tlb[0x40+0x17].L,__debug_mmu.tlb[0x40+0x17].P -printf "tlb[0x18]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x18].L,__debug_mmu.tlb[0x18].P,__debug_mmu.tlb[0x40+0x18].L,__debug_mmu.tlb[0x40+0x18].P -printf "tlb[0x19]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x19].L,__debug_mmu.tlb[0x19].P,__debug_mmu.tlb[0x40+0x19].L,__debug_mmu.tlb[0x40+0x19].P -printf "tlb[0x1a]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1a].L,__debug_mmu.tlb[0x1a].P,__debug_mmu.tlb[0x40+0x1a].L,__debug_mmu.tlb[0x40+0x1a].P -printf "tlb[0x1b]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1b].L,__debug_mmu.tlb[0x1b].P,__debug_mmu.tlb[0x40+0x1b].L,__debug_mmu.tlb[0x40+0x1b].P -printf "tlb[0x1c]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1c].L,__debug_mmu.tlb[0x1c].P,__debug_mmu.tlb[0x40+0x1c].L,__debug_mmu.tlb[0x40+0x1c].P -printf "tlb[0x1d]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1d].L,__debug_mmu.tlb[0x1d].P,__debug_mmu.tlb[0x40+0x1d].L,__debug_mmu.tlb[0x40+0x1d].P -printf "tlb[0x1e]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1e].L,__debug_mmu.tlb[0x1e].P,__debug_mmu.tlb[0x40+0x1e].L,__debug_mmu.tlb[0x40+0x1e].P -printf "tlb[0x1f]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x1f].L,__debug_mmu.tlb[0x1f].P,__debug_mmu.tlb[0x40+0x1f].L,__debug_mmu.tlb[0x40+0x1f].P -printf "tlb[0x20]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x20].L,__debug_mmu.tlb[0x20].P,__debug_mmu.tlb[0x40+0x20].L,__debug_mmu.tlb[0x40+0x20].P -printf "tlb[0x21]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x21].L,__debug_mmu.tlb[0x21].P,__debug_mmu.tlb[0x40+0x21].L,__debug_mmu.tlb[0x40+0x21].P -printf "tlb[0x22]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x22].L,__debug_mmu.tlb[0x22].P,__debug_mmu.tlb[0x40+0x22].L,__debug_mmu.tlb[0x40+0x22].P -printf "tlb[0x23]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x23].L,__debug_mmu.tlb[0x23].P,__debug_mmu.tlb[0x40+0x23].L,__debug_mmu.tlb[0x40+0x23].P -printf "tlb[0x24]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x24].L,__debug_mmu.tlb[0x24].P,__debug_mmu.tlb[0x40+0x24].L,__debug_mmu.tlb[0x40+0x24].P -printf "tlb[0x25]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x25].L,__debug_mmu.tlb[0x25].P,__debug_mmu.tlb[0x40+0x25].L,__debug_mmu.tlb[0x40+0x25].P -printf "tlb[0x26]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x26].L,__debug_mmu.tlb[0x26].P,__debug_mmu.tlb[0x40+0x26].L,__debug_mmu.tlb[0x40+0x26].P -printf "tlb[0x27]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x27].L,__debug_mmu.tlb[0x27].P,__debug_mmu.tlb[0x40+0x27].L,__debug_mmu.tlb[0x40+0x27].P -printf "tlb[0x28]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x28].L,__debug_mmu.tlb[0x28].P,__debug_mmu.tlb[0x40+0x28].L,__debug_mmu.tlb[0x40+0x28].P -printf "tlb[0x29]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x29].L,__debug_mmu.tlb[0x29].P,__debug_mmu.tlb[0x40+0x29].L,__debug_mmu.tlb[0x40+0x29].P -printf "tlb[0x2a]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2a].L,__debug_mmu.tlb[0x2a].P,__debug_mmu.tlb[0x40+0x2a].L,__debug_mmu.tlb[0x40+0x2a].P -printf "tlb[0x2b]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2b].L,__debug_mmu.tlb[0x2b].P,__debug_mmu.tlb[0x40+0x2b].L,__debug_mmu.tlb[0x40+0x2b].P -printf "tlb[0x2c]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2c].L,__debug_mmu.tlb[0x2c].P,__debug_mmu.tlb[0x40+0x2c].L,__debug_mmu.tlb[0x40+0x2c].P -printf "tlb[0x2d]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2d].L,__debug_mmu.tlb[0x2d].P,__debug_mmu.tlb[0x40+0x2d].L,__debug_mmu.tlb[0x40+0x2d].P -printf "tlb[0x2e]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2e].L,__debug_mmu.tlb[0x2e].P,__debug_mmu.tlb[0x40+0x2e].L,__debug_mmu.tlb[0x40+0x2e].P -printf "tlb[0x2f]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x2f].L,__debug_mmu.tlb[0x2f].P,__debug_mmu.tlb[0x40+0x2f].L,__debug_mmu.tlb[0x40+0x2f].P -printf "tlb[0x30]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x30].L,__debug_mmu.tlb[0x30].P,__debug_mmu.tlb[0x40+0x30].L,__debug_mmu.tlb[0x40+0x30].P -printf "tlb[0x31]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x31].L,__debug_mmu.tlb[0x31].P,__debug_mmu.tlb[0x40+0x31].L,__debug_mmu.tlb[0x40+0x31].P -printf "tlb[0x32]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x32].L,__debug_mmu.tlb[0x32].P,__debug_mmu.tlb[0x40+0x32].L,__debug_mmu.tlb[0x40+0x32].P -printf "tlb[0x33]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x33].L,__debug_mmu.tlb[0x33].P,__debug_mmu.tlb[0x40+0x33].L,__debug_mmu.tlb[0x40+0x33].P -printf "tlb[0x34]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x34].L,__debug_mmu.tlb[0x34].P,__debug_mmu.tlb[0x40+0x34].L,__debug_mmu.tlb[0x40+0x34].P -printf "tlb[0x35]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x35].L,__debug_mmu.tlb[0x35].P,__debug_mmu.tlb[0x40+0x35].L,__debug_mmu.tlb[0x40+0x35].P -printf "tlb[0x36]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x36].L,__debug_mmu.tlb[0x36].P,__debug_mmu.tlb[0x40+0x36].L,__debug_mmu.tlb[0x40+0x36].P -printf "tlb[0x37]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x37].L,__debug_mmu.tlb[0x37].P,__debug_mmu.tlb[0x40+0x37].L,__debug_mmu.tlb[0x40+0x37].P -printf "tlb[0x38]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x38].L,__debug_mmu.tlb[0x38].P,__debug_mmu.tlb[0x40+0x38].L,__debug_mmu.tlb[0x40+0x38].P -printf "tlb[0x39]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x39].L,__debug_mmu.tlb[0x39].P,__debug_mmu.tlb[0x40+0x39].L,__debug_mmu.tlb[0x40+0x39].P -printf "tlb[0x3a]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3a].L,__debug_mmu.tlb[0x3a].P,__debug_mmu.tlb[0x40+0x3a].L,__debug_mmu.tlb[0x40+0x3a].P -printf "tlb[0x3b]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3b].L,__debug_mmu.tlb[0x3b].P,__debug_mmu.tlb[0x40+0x3b].L,__debug_mmu.tlb[0x40+0x3b].P -printf "tlb[0x3c]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3c].L,__debug_mmu.tlb[0x3c].P,__debug_mmu.tlb[0x40+0x3c].L,__debug_mmu.tlb[0x40+0x3c].P -printf "tlb[0x3d]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3d].L,__debug_mmu.tlb[0x3d].P,__debug_mmu.tlb[0x40+0x3d].L,__debug_mmu.tlb[0x40+0x3d].P -printf "tlb[0x3e]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3e].L,__debug_mmu.tlb[0x3e].P,__debug_mmu.tlb[0x40+0x3e].L,__debug_mmu.tlb[0x40+0x3e].P -printf "tlb[0x3f]: %08lx %08lx %08lx %08lx\n",__debug_mmu.tlb[0x3f].L,__debug_mmu.tlb[0x3f].P,__debug_mmu.tlb[0x40+0x3f].L,__debug_mmu.tlb[0x40+0x3f].P -end - - -define _pgd -p (pgd_t[0x40])*(pgd_t*)(__debug_mmu.damr[0x3].L) -end - -define _ptd_i -p (pte_t[0x1000])*(pte_t*)(__debug_mmu.damr[0x4].L) -end - -define _ptd_d -p (pte_t[0x1000])*(pte_t*)(__debug_mmu.damr[0x5].L) -end diff --git a/Documentation/frv/gdbstub.txt b/Documentation/frv/gdbstub.txt deleted file mode 100644 index b92bfd902a4e..000000000000 --- a/Documentation/frv/gdbstub.txt +++ /dev/null @@ -1,130 +0,0 @@ - ==================== - DEBUGGING FR-V LINUX - ==================== - - -The kernel contains a GDB stub that talks GDB remote protocol across a serial -port. This permits GDB to single step through the kernel, set breakpoints and -trap exceptions that happen in kernel space and interrupt execution. It also -permits the NMI interrupt button or serial port events to jump the kernel into -the debugger. - -On the CPUs that have on-chip UARTs (FR400, FR403, FR405, FR555), the -GDB stub hijacks a serial port for its own purposes, and makes it -generate level 15 interrupts (NMI). The kernel proper cannot see the serial -port in question under these conditions. - -On the MB93091-VDK CPU boards, the GDB stub uses UART1, which would otherwise -be /dev/ttyS1. On the MB93093-PDK, the GDB stub uses UART0. Therefore, on the -PDK there is no externally accessible serial port and the serial port to -which the touch screen is attached becomes /dev/ttyS0. - -Note that the GDB stub runs entirely within CPU debug mode, and so should not -incur any exceptions or interrupts whilst it is active. In particular, note -that the clock will lose time since it is implemented in software. - - -================== -KERNEL PREPARATION -================== - -Firstly, a debuggable kernel must be built. To do this, unpack the kernel tree -and copy the configuration that you wish to use to .config. Then reconfigure -the following things on the "Kernel Hacking" tab: - - (*) "Include debugging information" - - Set this to "Y". This causes all C and Assembly files to be compiled - to include debugging information. - - (*) "In-kernel GDB stub" - - Set this to "Y". This causes the GDB stub to be compiled into the - kernel. - - (*) "Immediate activation" - - Set this to "Y" if you want the GDB stub to activate as soon as possible - and wait for GDB to connect. This allows you to start tracing right from - the beginning of start_kernel() in init/main.c. - - (*) "Console through GDB stub" - - Set this to "Y" if you wish to be able to use "console=gdb0" on the - command line. That tells the kernel to pass system console messages to - GDB (which then prints them on its standard output). This is useful when - debugging the serial drivers that'd otherwise be used to pass console - messages to the outside world. - -Then build as usual, download to the board and execute. Note that if -"Immediate activation" was selected, then the kernel will wait for GDB to -attach. If not, then the kernel will boot immediately and GDB will have to -interrupt it or wait for an exception to occur before doing anything with -the kernel. - - -========================= -KERNEL DEBUGGING WITH GDB -========================= - -Set the serial port on the computer that's going to run GDB to the appropriate -baud rate. Assuming the board's debug port is connected to ttyS0/COM1 on the -computer doing the debugging: - - stty -F /dev/ttyS0 115200 - -Then start GDB in the base of the kernel tree: - - frv-uclinux-gdb linux [uClinux] - -Or: - - frv-uclinux-gdb vmlinux [MMU linux] - -When the prompt appears: - - GNU gdb frv-031024 - Copyright 2003 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "--host=i686-pc-linux-gnu --target=frv-uclinux"... - (gdb) - -Attach to the board like this: - - (gdb) target remote /dev/ttyS0 - Remote debugging using /dev/ttyS0 - start_kernel () at init/main.c:395 - (gdb) - -This should show the appropriate lines from the source too. The kernel can -then be debugged almost as if it's any other program. - - -=============================== -INTERRUPTING THE RUNNING KERNEL -=============================== - -The kernel can be interrupted whilst it is running, causing a jump back to the -GDB stub and the debugger: - - (*) Pressing Ctrl-C in GDB. This will cause GDB to try and interrupt the - kernel by sending an RS232 BREAK over the serial line to the GDB - stub. This will (mostly) immediately interrupt the kernel and return it - to the debugger. - - (*) Pressing the NMI button on the board will also cause a jump into the - debugger. - - (*) Setting a software breakpoint. This sets a break instruction at the - desired location which the GDB stub then traps the exception for. - - (*) Setting a hardware breakpoint. The GDB stub is capable of using the IBAR - and DBAR registers to assist debugging. - -Furthermore, the GDB stub will intercept a number of exceptions automatically -if they are caused by kernel execution. It will also intercept BUG() macro -invocation. - diff --git a/Documentation/frv/kernel-ABI.txt b/Documentation/frv/kernel-ABI.txt deleted file mode 100644 index aaa1cec86f0b..000000000000 --- a/Documentation/frv/kernel-ABI.txt +++ /dev/null @@ -1,262 +0,0 @@ - ================================= - INTERNAL KERNEL ABI FOR FR-V ARCH - ================================= - -The internal FRV kernel ABI is not quite the same as the userspace ABI. A -number of the registers are used for special purposed, and the ABI is not -consistent between modules vs core, and MMU vs no-MMU. - -This partly stems from the fact that FRV CPUs do not have a separate -supervisor stack pointer, and most of them do not have any scratch -registers, thus requiring at least one general purpose register to be -clobbered in such an event. Also, within the kernel core, it is possible to -simply jump or call directly between functions using a relative offset. -This cannot be extended to modules for the displacement is likely to be too -far. Thus in modules the address of a function to call must be calculated -in a register and then used, requiring two extra instructions. - -This document has the following sections: - - (*) System call register ABI - (*) CPU operating modes - (*) Internal kernel-mode register ABI - (*) Internal debug-mode register ABI - (*) Virtual interrupt handling - - -======================== -SYSTEM CALL REGISTER ABI -======================== - -When a system call is made, the following registers are effective: - - REGISTERS CALL RETURN - =============== ======================= ======================= - GR7 System call number Preserved - GR8 Syscall arg #1 Return value - GR9-GR13 Syscall arg #2-6 Preserved - - -=================== -CPU OPERATING MODES -=================== - -The FR-V CPU has three basic operating modes. In order of increasing -capability: - - (1) User mode. - - Basic userspace running mode. - - (2) Kernel mode. - - Normal kernel mode. There are many additional control registers - available that may be accessed in this mode, in addition to all the - stuff available to user mode. This has two submodes: - - (a) Exceptions enabled (PSR.T == 1). - - Exceptions will invoke the appropriate normal kernel mode - handler. On entry to the handler, the PSR.T bit will be cleared. - - (b) Exceptions disabled (PSR.T == 0). - - No exceptions or interrupts may happen. Any mandatory exceptions - will cause the CPU to halt unless the CPU is told to jump into - debug mode instead. - - (3) Debug mode. - - No exceptions may happen in this mode. Memory protection and - management exceptions will be flagged for later consideration, but - the exception handler won't be invoked. Debugging traps such as - hardware breakpoints and watchpoints will be ignored. This mode is - entered only by debugging events obtained from the other two modes. - - All kernel mode registers may be accessed, plus a few extra debugging - specific registers. - - -================================= -INTERNAL KERNEL-MODE REGISTER ABI -================================= - -There are a number of permanent register assignments that are set up by -entry.S in the exception prologue. Note that there is a complete set of -exception prologues for each of user->kernel transition and kernel->kernel -transition. There are also user->debug and kernel->debug mode transition -prologues. - - - REGISTER FLAVOUR USE - =============== ======= ============================================== - GR1 Supervisor stack pointer - GR15 Current thread info pointer - GR16 GP-Rel base register for small data - GR28 Current exception frame pointer (__frame) - GR29 Current task pointer (current) - GR30 Destroyed by kernel mode entry - GR31 NOMMU Destroyed by debug mode entry - GR31 MMU Destroyed by TLB miss kernel mode entry - CCR.ICC2 Virtual interrupt disablement tracking - CCCR.CC3 Cleared by exception prologue - (atomic op emulation) - SCR0 MMU See mmu-layout.txt. - SCR1 MMU See mmu-layout.txt. - SCR2 MMU Save for EAR0 (destroyed by icache insns - in debug mode) - SCR3 MMU Save for GR31 during debug exceptions - DAMR/IAMR NOMMU Fixed memory protection layout. - DAMR/IAMR MMU See mmu-layout.txt. - - -Certain registers are also used or modified across function calls: - - REGISTER CALL RETURN - =============== =============================== ====================== - GR0 Fixed Zero - - GR2 Function call frame pointer - GR3 Special Preserved - GR3-GR7 - Clobbered - GR8 Function call arg #1 Return value - (or clobbered) - GR9 Function call arg #2 Return value MSW - (or clobbered) - GR10-GR13 Function call arg #3-#6 Clobbered - GR14 - Clobbered - GR15-GR16 Special Preserved - GR17-GR27 - Preserved - GR28-GR31 Special Only accessed - explicitly - LR Return address after CALL Clobbered - CCR/CCCR - Mostly Clobbered - - -================================ -INTERNAL DEBUG-MODE REGISTER ABI -================================ - -This is the same as the kernel-mode register ABI for functions calls. The -difference is that in debug-mode there's a different stack and a different -exception frame. Almost all the global registers from kernel-mode -(including the stack pointer) may be changed. - - REGISTER FLAVOUR USE - =============== ======= ============================================== - GR1 Debug stack pointer - GR16 GP-Rel base register for small data - GR31 Current debug exception frame pointer - (__debug_frame) - SCR3 MMU Saved value of GR31 - - -Note that debug mode is able to interfere with the kernel's emulated atomic -ops, so it must be exceedingly careful not to do any that would interact -with the main kernel in this regard. Hence the debug mode code (gdbstub) is -almost completely self-contained. The only external code used is the -sprintf family of functions. - -Furthermore, break.S is so complicated because single-step mode does not -switch off on entry to an exception. That means unless manually disabled, -single-stepping will blithely go on stepping into things like interrupts. -See gdbstub.txt for more information. - - -========================== -VIRTUAL INTERRUPT HANDLING -========================== - -Because accesses to the PSR is so slow, and to disable interrupts we have -to access it twice (once to read and once to write), we don't actually -disable interrupts at all if we don't have to. What we do instead is use -the ICC2 condition code flags to note virtual disablement, such that if we -then do take an interrupt, we note the flag, really disable interrupts, set -another flag and resume execution at the point the interrupt happened. -Setting condition flags as a side effect of an arithmetic or logical -instruction is really fast. This use of the ICC2 only occurs within the -kernel - it does not affect userspace. - -The flags we use are: - - (*) CCR.ICC2.Z [Zero flag] - - Set to virtually disable interrupts, clear when interrupts are - virtually enabled. Can be modified by logical instructions without - affecting the Carry flag. - - (*) CCR.ICC2.C [Carry flag] - - Clear to indicate hardware interrupts are really disabled, set otherwise. - - -What happens is this: - - (1) Normal kernel-mode operation. - - ICC2.Z is 0, ICC2.C is 1. - - (2) An interrupt occurs. The exception prologue examines ICC2.Z and - determines that nothing needs doing. This is done simply with an - unlikely BEQ instruction. - - (3) The interrupts are disabled (local_irq_disable) - - ICC2.Z is set to 1. - - (4) If interrupts were then re-enabled (local_irq_enable): - - ICC2.Z would be set to 0. - - A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would - be used to trap if interrupts were now virtually enabled, but - physically disabled - which they're not, so the trap isn't taken. The - kernel would then be back to state (1). - - (5) An interrupt occurs. The exception prologue examines ICC2.Z and - determines that the interrupt shouldn't actually have happened. It - jumps aside, and there disabled interrupts by setting PSR.PIL to 14 - and then it clears ICC2.C. - - (6) If interrupts were then saved and disabled again (local_irq_save): - - ICC2.Z would be shifted into the save variable and masked off - (giving a 1). - - ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be - unaffected (ie: 0). - - (7) If interrupts were then restored from state (6) (local_irq_restore): - - ICC2.Z would be set to indicate the result of XOR'ing the saved - value (ie: 1) with 1, which gives a result of 0 - thus leaving - ICC2.Z set. - - ICC2.C would remain unaffected (ie: 0). - - A TIHI #2 instruction would be used to again assay the current state, - but this would do nothing as Z==1. - - (8) If interrupts were then enabled (local_irq_enable): - - ICC2.Z would be cleared. ICC2.C would be left unaffected. Both - flags would now be 0. - - A TIHI #2 instruction again issued to assay the current state would - then trap as both Z==0 [interrupts virtually enabled] and C==0 - [interrupts really disabled] would then be true. - - (9) The trap #2 handler would simply enable hardware interrupts - (set PSR.PIL to 0), set ICC2.C to 1 and return. - -(10) Immediately upon returning, the pending interrupt would be taken. - -(11) The interrupt handler would take the path of actually processing the - interrupt (ICC2.Z is clear, BEQ fails as per step (2)). - -(12) The interrupt handler would then set ICC2.C to 1 since hardware - interrupts are definitely enabled - or else the kernel wouldn't be here. - -(13) On return from the interrupt handler, things would be back to state (1). - -This trap (#2) is only available in kernel mode. In user mode it will -result in SIGILL. diff --git a/Documentation/frv/mmu-layout.txt b/Documentation/frv/mmu-layout.txt deleted file mode 100644 index db10250df6be..000000000000 --- a/Documentation/frv/mmu-layout.txt +++ /dev/null @@ -1,306 +0,0 @@ - ================================= - FR451 MMU LINUX MEMORY MANAGEMENT - ================================= - -============ -MMU HARDWARE -============ - -FR451 MMU Linux puts the MMU into EDAT mode whilst running. This means that it uses both the SAT -registers and the DAT TLB to perform address translation. - -There are 8 IAMLR/IAMPR register pairs and 16 DAMLR/DAMPR register pairs for SAT mode. - -In DAT mode, there is also a TLB organised in cache format as 64 lines x 2 ways. Each line spans a -16KB range of addresses, but can match a larger region. - - -=========================== -MEMORY MANAGEMENT REGISTERS -=========================== - -Certain control registers are used by the kernel memory management routines: - - REGISTERS USAGE - ====================== ================================================== - IAMR0, DAMR0 Kernel image and data mappings - IAMR1, DAMR1 First-chance TLB lookup mapping - DAMR2 Page attachment for cache flush by page - DAMR3 Current PGD mapping - SCR0, DAMR4 Instruction TLB PGE/PTD cache - SCR1, DAMR5 Data TLB PGE/PTD cache - DAMR6-10 kmap_atomic() mappings - DAMR11 I/O mapping - CXNR mm_struct context ID - TTBR Page directory (PGD) pointer (physical address) - - -===================== -GENERAL MEMORY LAYOUT -===================== - -The physical memory layout is as follows: - - PHYSICAL ADDRESS CONTROLLER DEVICE - =================== ============== ======================================= - 00000000 - BFFFFFFF SDRAM SDRAM area - E0000000 - EFFFFFFF L-BUS CS2# VDK SLBUS/PCI window - F0000000 - F0FFFFFF L-BUS CS5# MB93493 CSC area (DAV daughter board) - F1000000 - F1FFFFFF L-BUS CS7# (CB70 CPU-card PCMCIA port I/O space) - FC000000 - FC0FFFFF L-BUS CS1# VDK MB86943 config space - FC100000 - FC1FFFFF L-BUS CS6# DM9000 NIC I/O space - FC200000 - FC2FFFFF L-BUS CS3# MB93493 CSR area (DAV daughter board) - FD000000 - FDFFFFFF L-BUS CS4# (CB70 CPU-card extra flash space) - FE000000 - FEFFFFFF Internal CPU peripherals - FF000000 - FF1FFFFF L-BUS CS0# Flash 1 - FF200000 - FF3FFFFF L-BUS CS0# Flash 2 - FFC00000 - FFC0001F L-BUS CS0# FPGA - -The virtual memory layout is: - - VIRTUAL ADDRESS PHYSICAL TRANSLATOR FLAGS SIZE OCCUPATION - ================= ======== ============== ======= ======= =================================== - 00004000-BFFFFFFF various TLB,xAMR1 D-N-??V 3GB Userspace - C0000000-CFFFFFFF 00000000 xAMPR0 -L-S--V 256MB Kernel image and data - D0000000-D7FFFFFF various TLB,xAMR1 D-NS??V 128MB vmalloc area - D8000000-DBFFFFFF various TLB,xAMR1 D-NS??V 64MB kmap() area - DC000000-DCFFFFFF various TLB 1MB Secondary kmap_atomic() frame - DD000000-DD27FFFF various DAMR 160KB Primary kmap_atomic() frame - DD040000 DAMR2/IAMR2 -L-S--V page Page cache flush attachment point - DD080000 DAMR3 -L-SC-V page Page Directory (PGD) - DD0C0000 DAMR4 -L-SC-V page Cached insn TLB Page Table lookup - DD100000 DAMR5 -L-SC-V page Cached data TLB Page Table lookup - DD140000 DAMR6 -L-S--V page kmap_atomic(KM_BOUNCE_READ) - DD180000 DAMR7 -L-S--V page kmap_atomic(KM_SKB_SUNRPC_DATA) - DD1C0000 DAMR8 -L-S--V page kmap_atomic(KM_SKB_DATA_SOFTIRQ) - DD200000 DAMR9 -L-S--V page kmap_atomic(KM_USER0) - DD240000 DAMR10 -L-S--V page kmap_atomic(KM_USER1) - E0000000-FFFFFFFF E0000000 DAMR11 -L-SC-V 512MB I/O region - -IAMPR1 and DAMPR1 are used as an extension to the TLB. - - -==================== -KMAP AND KMAP_ATOMIC -==================== - -To access pages in the page cache (which may not be directly accessible if highmem is available), -the kernel calls kmap(), does the access and then calls kunmap(); or it calls kmap_atomic(), does -the access and then calls kunmap_atomic(). - -kmap() creates an attachment between an arbitrary inaccessible page and a range of virtual -addresses by installing a PTE in a special page table. The kernel can then access this page as it -wills. When it's finished, the kernel calls kunmap() to clear the PTE. - -kmap_atomic() does something slightly different. In the interests of speed, it chooses one of two -strategies: - - (1) If possible, kmap_atomic() attaches the requested page to one of DAMPR5 through DAMPR10 - register pairs; and the matching kunmap_atomic() clears the DAMPR. This makes high memory - support really fast as there's no need to flush the TLB or modify the page tables. The DAMLR - registers being used for this are preset during boot and don't change over the lifetime of the - process. There's a direct mapping between the first few kmap_atomic() types, DAMR number and - virtual address slot. - - However, there are more kmap_atomic() types defined than there are DAMR registers available, - so we fall back to: - - (2) kmap_atomic() uses a slot in the secondary frame (determined by the type parameter), and then - locks an entry in the TLB to translate that slot to the specified page. The number of slots is - obviously limited, and their positions are controlled such that each slot is matched by a - different line in the TLB. kunmap() ejects the entry from the TLB. - -Note that the first three kmap atomic types are really just declared as placeholders. The DAMPR -registers involved are actually modified directly. - -Also note that kmap() itself may sleep, kmap_atomic() may never sleep and both always succeed; -furthermore, a driver using kmap() may sleep before calling kunmap(), but may not sleep before -calling kunmap_atomic() if it had previously called kmap_atomic(). - - -=============================== -USING MORE THAN 256MB OF MEMORY -=============================== - -The kernel cannot access more than 256MB of memory directly. The physical layout, however, permits -up to 3GB of SDRAM (possibly 3.25GB) to be made available. By using CONFIG_HIGHMEM, the kernel can -allow userspace (by way of page tables) and itself (by way of kmap) to deal with the memory -allocation. - -External devices can, of course, still DMA to and from all of the SDRAM, even if the kernel can't -see it directly. The kernel translates page references into real addresses for communicating to the -devices. - - -=================== -PAGE TABLE TOPOLOGY -=================== - -The page tables are arranged in 2-layer format. There is a middle layer (PMD) that would be used in -3-layer format tables but that is folded into the top layer (PGD) and so consumes no extra memory -or processing power. - - +------+ PGD PMD - | TTBR |--->+-------------------+ - +------+ | | : STE | - | PGE0 | PME0 : STE | - | | : STE | - +-------------------+ Page Table - | | : STE -------------->+--------+ +0x0000 - | PGE1 | PME0 : STE -----------+ | PTE0 | - | | : STE -------+ | +--------+ - +-------------------+ | | | PTE63 | - | | : STE | | +-->+--------+ +0x0100 - | PGE2 | PME0 : STE | | | PTE64 | - | | : STE | | +--------+ - +-------------------+ | | PTE127 | - | | : STE | +------>+--------+ +0x0200 - | PGE3 | PME0 : STE | | PTE128 | - | | : STE | +--------+ - +-------------------+ | PTE191 | - +--------+ +0x0300 - -Each Page Directory (PGD) is 16KB (page size) in size and is divided into 64 entries (PGEs). Each -PGE contains one Page Mid Directory (PMD). - -Each PMD is 256 bytes in size and contains a single entry (PME). Each PME holds 64 FR451 MMU -segment table entries of 4 bytes apiece. Each PME "points to" a page table. In practice, each STE -points to a subset of the page table, the first to PT+0x0000, the second to PT+0x0100, the third to -PT+0x200, and so on. - -Each PGE and PME covers 64MB of the total virtual address space. - -Each Page Table (PTD) is 16KB (page size) in size, and is divided into 4096 entries (PTEs). Each -entry can point to one 16KB page. In practice, each Linux page table is subdivided into 64 FR451 -MMU page tables. But they are all grouped together to make management easier, in particular rmap -support is then trivial. - -Grouping page tables in this fashion makes PGE caching in SCR0/SCR1 more efficient because the -coverage of the cached item is greater. - -Page tables for the vmalloc area are allocated at boot time and shared between all mm_structs. - - -================= -USER SPACE LAYOUT -================= - -For MMU capable Linux, the regions userspace code are allowed to access are kept entirely separate -from those dedicated to the kernel: - - VIRTUAL ADDRESS SIZE PURPOSE - ================= ===== =================================== - 00000000-00003fff 4KB NULL pointer access trap - 00004000-01ffffff ~32MB lower mmap space (grows up) - 02000000-021fffff 2MB Stack space (grows down from top) - 02200000-nnnnnnnn Executable mapping - nnnnnnnn- brk space (grows up) - -bfffffff upper mmap space (grows down) - -This is so arranged so as to make best use of the 16KB page tables and the way in which PGEs/PMEs -are cached by the TLB handler. The lower mmap space is filled first, and then the upper mmap space -is filled. - - -=============================== -GDB-STUB MMU DEBUGGING SERVICES -=============================== - -The gdb-stub included in this kernel provides a number of services to aid in the debugging of MMU -related kernel services: - - (*) Every time the kernel stops, certain state information is dumped into __debug_mmu. This - variable is defined in arch/frv/kernel/gdb-stub.c. Note that the gdbinit file in this - directory has some useful macros for dealing with this. - - (*) __debug_mmu.tlb[] - - This receives the current TLB contents. This can be viewed with the _tlb GDB macro: - - (gdb) _tlb - tlb[0x00]: 01000005 00718203 01000002 00718203 - tlb[0x01]: 01004002 006d4201 01004005 006d4203 - tlb[0x02]: 01008002 006d0201 01008006 00004200 - tlb[0x03]: 0100c006 007f4202 0100c002 0064c202 - tlb[0x04]: 01110005 00774201 01110002 00774201 - tlb[0x05]: 01114005 00770201 01114002 00770201 - tlb[0x06]: 01118002 0076c201 01118005 0076c201 - ... - tlb[0x3d]: 010f4002 00790200 001f4002 0054ca02 - tlb[0x3e]: 010f8005 0078c201 010f8002 0078c201 - tlb[0x3f]: 001fc002 0056ca01 001fc005 00538a01 - - (*) __debug_mmu.iamr[] - (*) __debug_mmu.damr[] - - These receive the current IAMR and DAMR contents. These can be viewed with the _amr - GDB macro: - - (gdb) _amr - AMRx DAMR IAMR - ==== ===================== ===================== - amr0 : L:c0000000 P:00000cb9 : L:c0000000 P:000004b9 - amr1 : L:01070005 P:006f9203 : L:0102c005 P:006a1201 - amr2 : L:d8d00000 P:00000000 : L:d8d00000 P:00000000 - amr3 : L:d8d04000 P:00534c0d : L:00000000 P:00000000 - amr4 : L:d8d08000 P:00554c0d : L:00000000 P:00000000 - amr5 : L:d8d0c000 P:00554c0d : L:00000000 P:00000000 - amr6 : L:d8d10000 P:00000000 : L:00000000 P:00000000 - amr7 : L:d8d14000 P:00000000 : L:00000000 P:00000000 - amr8 : L:d8d18000 P:00000000 - amr9 : L:d8d1c000 P:00000000 - amr10: L:d8d20000 P:00000000 - amr11: L:e0000000 P:e0000ccd - - (*) The current task's page directory is bound to DAMR3. - - This can be viewed with the _pgd GDB macro: - - (gdb) _pgd - $3 = {{pge = {{ste = {0x554001, 0x554101, 0x554201, 0x554301, 0x554401, - 0x554501, 0x554601, 0x554701, 0x554801, 0x554901, 0x554a01, - 0x554b01, 0x554c01, 0x554d01, 0x554e01, 0x554f01, 0x555001, - 0x555101, 0x555201, 0x555301, 0x555401, 0x555501, 0x555601, - 0x555701, 0x555801, 0x555901, 0x555a01, 0x555b01, 0x555c01, - 0x555d01, 0x555e01, 0x555f01, 0x556001, 0x556101, 0x556201, - 0x556301, 0x556401, 0x556501, 0x556601, 0x556701, 0x556801, - 0x556901, 0x556a01, 0x556b01, 0x556c01, 0x556d01, 0x556e01, - 0x556f01, 0x557001, 0x557101, 0x557201, 0x557301, 0x557401, - 0x557501, 0x557601, 0x557701, 0x557801, 0x557901, 0x557a01, - 0x557b01, 0x557c01, 0x557d01, 0x557e01, 0x557f01}}}}, {pge = {{ - ste = {0x0 <repeats 64 times>}}}} <repeats 51 times>, {pge = {{ste = { - 0x248001, 0x248101, 0x248201, 0x248301, 0x248401, 0x248501, - 0x248601, 0x248701, 0x248801, 0x248901, 0x248a01, 0x248b01, - 0x248c01, 0x248d01, 0x248e01, 0x248f01, 0x249001, 0x249101, - 0x249201, 0x249301, 0x249401, 0x249501, 0x249601, 0x249701, - 0x249801, 0x249901, 0x249a01, 0x249b01, 0x249c01, 0x249d01, - 0x249e01, 0x249f01, 0x24a001, 0x24a101, 0x24a201, 0x24a301, - 0x24a401, 0x24a501, 0x24a601, 0x24a701, 0x24a801, 0x24a901, - 0x24aa01, 0x24ab01, 0x24ac01, 0x24ad01, 0x24ae01, 0x24af01, - 0x24b001, 0x24b101, 0x24b201, 0x24b301, 0x24b401, 0x24b501, - 0x24b601, 0x24b701, 0x24b801, 0x24b901, 0x24ba01, 0x24bb01, - 0x24bc01, 0x24bd01, 0x24be01, 0x24bf01}}}}, {pge = {{ste = { - 0x0 <repeats 64 times>}}}} <repeats 11 times>} - - (*) The PTD last used by the instruction TLB miss handler is attached to DAMR4. - (*) The PTD last used by the data TLB miss handler is attached to DAMR5. - - These can be viewed with the _ptd_i and _ptd_d GDB macros: - - (gdb) _ptd_d - $5 = {{pte = 0x0} <repeats 127 times>, {pte = 0x539b01}, { - pte = 0x0} <repeats 896 times>, {pte = 0x719303}, {pte = 0x6d5303}, { - pte = 0x0}, {pte = 0x0}, {pte = 0x0}, {pte = 0x0}, {pte = 0x0}, { - pte = 0x0}, {pte = 0x0}, {pte = 0x0}, {pte = 0x0}, {pte = 0x6a1303}, { - pte = 0x0} <repeats 12 times>, {pte = 0x709303}, {pte = 0x0}, {pte = 0x0}, - {pte = 0x6fd303}, {pte = 0x6f9303}, {pte = 0x6f5303}, {pte = 0x0}, { - pte = 0x6ed303}, {pte = 0x531b01}, {pte = 0x50db01}, { - pte = 0x0} <repeats 13 times>, {pte = 0x5303}, {pte = 0x7f5303}, { - pte = 0x509b01}, {pte = 0x505b01}, {pte = 0x7c9303}, {pte = 0x7b9303}, { - pte = 0x7b5303}, {pte = 0x7b1303}, {pte = 0x7ad303}, {pte = 0x0}, { - pte = 0x0}, {pte = 0x7a1303}, {pte = 0x0}, {pte = 0x795303}, {pte = 0x0}, { - pte = 0x78d303}, {pte = 0x0}, {pte = 0x0}, {pte = 0x0}, {pte = 0x0}, { - pte = 0x0}, {pte = 0x775303}, {pte = 0x771303}, {pte = 0x76d303}, { - pte = 0x0}, {pte = 0x765303}, {pte = 0x7c5303}, {pte = 0x501b01}, { - pte = 0x4f1b01}, {pte = 0x4edb01}, {pte = 0x0}, {pte = 0x4f9b01}, { - pte = 0x4fdb01}, {pte = 0x0} <repeats 2992 times>} diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 6501389d55b9..84bb74dcae12 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -305,7 +305,6 @@ Code Seq#(hex) Include File Comments 0xA0 all linux/sdp/sdp.h Industrial Device Project <mailto:kenji@bitgate.com> 0xA1 0 linux/vtpm_proxy.h TPM Emulator Proxy Driver -0xA2 00-0F arch/tile/include/asm/hardwall.h 0xA3 80-8F Port ACL in development: <mailto:tlewis@mindspring.com> 0xA3 90-9F linux/dtlk.h diff --git a/Documentation/metag/00-INDEX b/Documentation/metag/00-INDEX deleted file mode 100644 index db11c513bd5c..000000000000 --- a/Documentation/metag/00-INDEX +++ /dev/null @@ -1,4 +0,0 @@ -00-INDEX - - this file -kernel-ABI.txt - - Documents metag ABI details diff --git a/Documentation/metag/kernel-ABI.txt b/Documentation/metag/kernel-ABI.txt deleted file mode 100644 index 628216603198..000000000000 --- a/Documentation/metag/kernel-ABI.txt +++ /dev/null @@ -1,256 +0,0 @@ - ========================== - KERNEL ABIS FOR METAG ARCH - ========================== - -This document describes the Linux ABIs for the metag architecture, and has the -following sections: - - (*) Outline of registers - (*) Userland registers - (*) Kernel registers - (*) System call ABI - (*) Calling conventions - - -==================== -OUTLINE OF REGISTERS -==================== - -The main Meta core registers are arranged in units: - - UNIT Type DESCRIPTION GP EXT PRIV GLOBAL - ======= ======= =============== ======= ======= ======= ======= - CT Special Control unit - D0 General Data unit 0 0-7 8-15 16-31 16-31 - D1 General Data unit 1 0-7 8-15 16-31 16-31 - A0 General Address unit 0 0-3 4-7 8-15 8-15 - A1 General Address unit 1 0-3 4-7 8-15 8-15 - PC Special PC unit 0 1 - PORT Special Ports - TR Special Trigger unit 0-7 - TT Special Trace unit 0-5 - FX General FP unit 0-15 - -GP registers form part of the main context. - -Extended context registers (EXT) may not be present on all hardware threads and -can be context switched if support is enabled and the appropriate bits are set -in e.g. the D0.8 register to indicate what extended state to preserve. - -Global registers are shared between threads and are privilege protected. - -See arch/metag/include/asm/metag_regs.h for definitions relating to core -registers and the fields and bits they contain. See the TRMs for further details -about special registers. - -Several special registers are preserved in the main context, these are the -interesting ones: - - REG (ALIAS) PURPOSE - ======================= =============================================== - CT.1 (TXMODE) Processor mode bits (particularly for DSP) - CT.2 (TXSTATUS) Condition flags and LSM_STEP (MGET/MSET step) - CT.3 (TXRPT) Branch repeat counter - PC.0 (PC) Program counter - -Some of the general registers have special purposes in the ABI and therefore -have aliases: - - D0 REG (ALIAS) PURPOSE D1 REG (ALIAS) PURPOSE - =============== =============== =============== ======================= - D0.0 (D0Re0) 32bit result D1.0 (D1Re0) Top half of 64bit result - D0.1 (D0Ar6) Argument 6 D1.1 (D1Ar5) Argument 5 - D0.2 (D0Ar4) Argument 4 D1.2 (D1Ar3) Argument 3 - D0.3 (D0Ar2) Argument 2 D1.3 (D1Ar1) Argument 1 - D0.4 (D0FrT) Frame temp D1.4 (D1RtP) Return pointer - D0.5 Call preserved D1.5 Call preserved - D0.6 Call preserved D1.6 Call preserved - D0.7 Call preserved D1.7 Call preserved - - A0 REG (ALIAS) PURPOSE A1 REG (ALIAS) PURPOSE - =============== =============== =============== ======================= - A0.0 (A0StP) Stack pointer A1.0 (A1GbP) Global base pointer - A0.1 (A0FrP) Frame pointer A1.1 (A1LbP) Local base pointer - A0.2 A1.2 - A0.3 A1.3 - - -================== -USERLAND REGISTERS -================== - -All the general purpose D0, D1, A0, A1 registers are preserved when entering the -kernel (including asynchronous events such as interrupts and timer ticks) except -the following which have special purposes in the ABI: - - REGISTERS WHEN STATUS PURPOSE - =============== ======= =============== =============================== - D0.8 DSP Preserved ECH, determines what extended - DSP state to preserve. - A0.0 (A0StP) ALWAYS Preserved Stack >= A0StP may be clobbered - at any time by the creation of a - signal frame. - A1.0 (A1GbP) SMP Clobbered Used as temporary for loading - kernel stack pointer and saving - core context. - A0.15 !SMP Protected Stores kernel stack pointer. - A1.15 ALWAYS Protected Stores kernel base pointer. - -On UP A0.15 is used to store the kernel stack pointer for storing the userland -context. A0.15 is global between hardware threads though which means it cannot -be used on SMP for this purpose. Since no protected local registers are -available A1GbP is reserved for use as a temporary to allow a percpu stack -pointer to be loaded for storing the rest of the context. - - -================ -KERNEL REGISTERS -================ - -When in the kernel the following registers have special purposes in the ABI: - - REGISTERS WHEN STATUS PURPOSE - =============== ======= =============== =============================== - A0.0 (A0StP) ALWAYS Preserved Stack >= A0StP may be clobbered - at any time by the creation of - an irq signal frame. - A1.0 (A1GbP) ALWAYS Preserved Reserved (kernel base pointer). - - -=============== -SYSTEM CALL ABI -=============== - -When a system call is made, the following registers are effective: - - REGISTERS CALL RETURN - =============== ======================= =============================== - D0.0 (D0Re0) Return value (or -errno) - D1.0 (D1Re0) System call number Clobbered - D0.1 (D0Ar6) Syscall arg #6 Preserved - D1.1 (D1Ar5) Syscall arg #5 Preserved - D0.2 (D0Ar4) Syscall arg #4 Preserved - D1.2 (D1Ar3) Syscall arg #3 Preserved - D0.3 (D0Ar2) Syscall arg #2 Preserved - D1.3 (D1Ar1) Syscall arg #1 Preserved - -Due to the limited number of argument registers and some system calls with badly -aligned 64-bit arguments, 64-bit values are always packed in consecutive -arguments, even if this is contrary to the normal calling conventions (where the -two halves would go in a matching pair of data registers). - -For example fadvise64_64 usually has the signature: - - long sys_fadvise64_64(i32 fd, i64 offs, i64 len, i32 advice); - -But for metag fadvise64_64 is wrapped so that the 64-bit arguments are packed: - - long sys_fadvise64_64_metag(i32 fd, i32 offs_lo, - i32 offs_hi, i32 len_lo, - i32 len_hi, i32 advice) - -So the arguments are packed in the registers like this: - - D0 REG (ALIAS) VALUE D1 REG (ALIAS) VALUE - =============== =============== =============== ======================= - D0.1 (D0Ar6) advice D1.1 (D1Ar5) hi(len) - D0.2 (D0Ar4) lo(len) D1.2 (D1Ar3) hi(offs) - D0.3 (D0Ar2) lo(offs) D1.3 (D1Ar1) fd - - -=================== -CALLING CONVENTIONS -=================== - -These calling conventions apply to both user and kernel code. The stack grows -from low addresses to high addresses in the metag ABI. The stack pointer (A0StP) -should always point to the next free address on the stack and should at all -times be 64-bit aligned. The following registers are effective at the point of a -call: - - REGISTERS CALL RETURN - =============== ======================= =============================== - D0.0 (D0Re0) 32bit return value - D1.0 (D1Re0) Upper half of 64bit return value - D0.1 (D0Ar6) 32bit argument #6 Clobbered - D1.1 (D1Ar5) 32bit argument #5 Clobbered - D0.2 (D0Ar4) 32bit argument #4 Clobbered - D1.2 (D1Ar3) 32bit argument #3 Clobbered - D0.3 (D0Ar2) 32bit argument #2 Clobbered - D1.3 (D1Ar1) 32bit argument #1 Clobbered - D0.4 (D0FrT) Clobbered - D1.4 (D1RtP) Return pointer Clobbered - D{0-1}.{5-7} Preserved - A0.0 (A0StP) Stack pointer Preserved - A1.0 (A0GbP) Preserved - A0.1 (A0FrP) Frame pointer Preserved - A1.1 (A0LbP) Preserved - A{0-1},{2-3} Clobbered - -64-bit arguments are placed in matching pairs of registers (i.e. the same -register number in both D0 and D1 units), with the least significant half in D0 -and the most significant half in D1, leaving a gap where necessary. Further -arguments are stored on the stack in reverse order (earlier arguments at higher -addresses): - - ADDRESS 0 1 2 3 4 5 6 7 - =============== ===== ===== ===== ===== ===== ===== ===== ===== - A0StP --> - A0StP-0x08 32bit argument #8 32bit argument #7 - A0StP-0x10 32bit argument #10 32bit argument #9 - -Function prologues tend to look a bit like this: - - /* If frame pointer in use, move it to frame temp register so it can be - easily pushed onto stack */ - MOV D0FrT,A0FrP - - /* If frame pointer in use, set it to stack pointer */ - ADD A0FrP,A0StP,#0 - - /* Preserve D0FrT, D1RtP, D{0-1}.{5-7} on stack, incrementing A0StP */ - MSETL [A0StP++],D0FrT,D0.5,D0.6,D0.7 - - /* Allocate some stack space for local variables */ - ADD A0StP,A0StP,#0x10 - -At this point the stack would look like this: - - ADDRESS 0 1 2 3 4 5 6 7 - =============== ===== ===== ===== ===== ===== ===== ===== ===== - A0StP --> - A0StP-0x08 - A0StP-0x10 - A0StP-0x18 Old D0.7 Old D1.7 - A0StP-0x20 Old D0.6 Old D1.6 - A0StP-0x28 Old D0.5 Old D1.5 - A0FrP --> Old A0FrP (frame ptr) Old D1RtP (return ptr) - A0FrP-0x08 32bit argument #8 32bit argument #7 - A0FrP-0x10 32bit argument #10 32bit argument #9 - -Function epilogues tend to differ depending on the use of a frame pointer. An -example of a frame pointer epilogue: - - /* Restore D0FrT, D1RtP, D{0-1}.{5-7} from stack, incrementing A0FrP */ - MGETL D0FrT,D0.5,D0.6,D0.7,[A0FrP++] - /* Restore stack pointer to where frame pointer was before increment */ - SUB A0StP,A0FrP,#0x20 - /* Restore frame pointer from frame temp */ - MOV A0FrP,D0FrT - /* Return to caller via restored return pointer */ - MOV PC,D1RtP - -If the function hasn't touched the frame pointer, MGETL cannot be safely used -with A0StP as it always increments and that would expose the stack to clobbering -by interrupts (kernel) or signals (user). Therefore it's common to see the MGETL -split into separate GETL instructions: - - /* Restore D0FrT, D1RtP, D{0-1}.{5-7} from stack */ - GETL D0FrT,D1RtP,[A0StP+#-0x30] - GETL D0.5,D1.5,[A0StP+#-0x28] - GETL D0.6,D1.6,[A0StP+#-0x20] - GETL D0.7,D1.7,[A0StP+#-0x18] - /* Restore stack pointer */ - SUB A0StP,A0StP,#0x30 - /* Return to caller via restored return pointer */ - MOV PC,D1RtP diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt deleted file mode 100644 index d3507bad428d..000000000000 --- a/Documentation/mn10300/ABI.txt +++ /dev/null @@ -1,149 +0,0 @@ - ========================= - MN10300 FUNCTION CALL ABI - ========================= - -======= -GENERAL -======= - -The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not -supported. - -The stack grows downwards, and should always be 32-bit aligned. There are -separate stack pointer registers for userspace and the kernel. - - -================ -ARGUMENT PASSING -================ - -The first two arguments (assuming up to 32-bits per argument) to a function are -passed in the D0 and D1 registers respectively; all other arguments are passed -on the stack. - -If 64-bit arguments are being passed, then they are never split between -registers and the stack. If the first argument is a 64-bit value, it will be -passed in D0:D1. If the first argument is not a 64-bit value, but the second -is, the second will be passed entirely on the stack and D1 will be unused. - -Arguments smaller than 32-bits are not coalesced within a register or a stack -word. For example, two byte-sized arguments will always be passed in separate -registers or word-sized stack slots. - - -================= -CALLING FUNCTIONS -================= - -The caller must allocate twelve bytes on the stack for the callee's use before -it inserts a CALL instruction. The CALL instruction will write into the TOS -word, but won't actually modify the stack pointer; similarly, the RET -instruction reads from the TOS word of the stack, but doesn't move the stack -pointer beyond it. - - - Stack: - | | - | | - |---------------| SP+20 - | 4th Arg | - |---------------| SP+16 - | 3rd Arg | - |---------------| SP+12 - | D1 Save Slot | - |---------------| SP+8 - | D0 Save Slot | - |---------------| SP+4 - | Return Addr | - |---------------| SP - | | - | | - - -The caller must leave space on the stack (hence an allocation of twelve bytes) -in which the callee may store the first two arguments. - - -============ -RETURN VALUE -============ - -The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value), -or A0 for a pointer. - -If the return value is a value larger than 64-bits, or is a structure or an -array, then a hidden first argument will be passed to the callee by the caller: -this will point to a piece of memory large enough to hold the result of the -function. In this case, the callee will return the value in that piece of -memory, and no value will be returned in D0 or A0. - - -=================== -REGISTER CLOBBERING -=================== - -The values in certain registers may be clobbered by the callee, and other -values must be saved: - - Clobber: D0-D1, A0-A1, E0-E3 - Save: D2-D3, A2-A3, E4-E7, SP - -All other non-supervisor-only registers are clobberable (such as MDR, MCRL, -MCRH). - - -================= -SPECIAL REGISTERS -================= - -Certain ordinary registers may carry special usage for the compiler: - - A3: Frame pointer - E2: TLS pointer - - -========== -KERNEL ABI -========== - -The kernel may use a slightly different ABI internally. - - (*) E2 - - If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer - will be kept in the E2 register, and that register will be marked - unavailable for the compiler to use as a scratch register. - - Normally the kernel uses something like: - - MOV SP,An - AND 0xFFFFE000,An - MOV (An),Rm // Rm holds current - MOV (yyy,Rm) // Access current->yyy - - To find the address of current; but since this option permits current to - be carried globally in an register, it can use: - - MOV (yyy,E2) // Access current->yyy - - instead. - - -=============== -SYSTEM CALL ABI -=============== - -System calls are called with the following convention: - - REGISTER ENTRY EXIT - =============== ======================= ======================= - D0 Syscall number Return value - A0 1st syscall argument Saved - D1 2nd syscall argument Saved - A3 3rd syscall argument Saved - A2 4th syscall argument Saved - D3 5th syscall argument Saved - D2 6th syscall argument Saved - -All other registers are saved. The layout is a consequence of the way the MOVM -instruction stores registers onto the stack. diff --git a/Documentation/mn10300/compartmentalisation.txt b/Documentation/mn10300/compartmentalisation.txt deleted file mode 100644 index 8958b51dac4b..000000000000 --- a/Documentation/mn10300/compartmentalisation.txt +++ /dev/null @@ -1,60 +0,0 @@ - ========================================= - PART-SPECIFIC SOURCE COMPARTMENTALISATION - ========================================= - -The sources for various parts are compartmentalised at two different levels: - - (1) Processor level - - The "processor level" is a CPU core plus the other on-silicon - peripherals. - - Processor-specific header files are divided among directories in a similar - way to the CPU level: - - (*) include/asm-mn10300/proc-mn103e010/ - - Support for the AM33v2 CPU core. - - The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option - from the "Processor support" choice menu in the arch/mn10300/Kconfig file. - - - (2) Unit level - - The "unit level" is a processor plus all the external peripherals - controlled by that processor. - - Unit-specific header files are divided among directories in a similar way - to the CPU level; not only that, but specific sources may also be - segregated into separate directories under the arch directory: - - (*) include/asm-mn10300/unit-asb2303/ - (*) arch/mn10300/unit-asb2303/ - - Support for the ASB2303 board with an ASB2308 daughter board. - - (*) include/asm-mn10300/unit-asb2305/ - (*) arch/mn10300/unit-asb2305/ - - Support for the ASB2305 board. - - The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option - from the "Unit type" choice menu in the arch/mn10300/Kconfig file. - - -============ -COMPILE TIME -============ - -When the kernel is compiled, symbolic links will be made in the asm header file -directory for this arch: - - include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/ - include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/ - -So that the header files contained in those directories can be accessed without -lots of #ifdef-age. - -The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the -compilation process; all other unit-specific directories will be ignored. diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index beea975980f6..6d6200ea27b8 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -55,11 +55,6 @@ wdt_time: Watchdog time in seconds. (default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- -bfin_wdt: -timeout: Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=20) -nowayout: Watchdog cannot be stopped once started - (default=kernel config parameter) -------------------------------------------------- coh901327_wdt: margin: Watchdog margin in seconds (default 60s) ------------------------------------------------- |