Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...

16 files changed, 242 insertions, 42 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
new file mode 100644
index 000000000000..73b77a6be196
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D0
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_D0/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D0/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D0.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
new file mode 100644
index 000000000000..30c20703fb8c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D1
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D1/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D1/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D1.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D1.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
new file mode 100644
index 000000000000..fd9d84b421e1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D2
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D2/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D2/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D2.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D2.  The names
+		of the links are the same as the names of the directories they
+		point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
new file mode 100644
index 000000000000..3df32c20addf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D3hot/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D3hot/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D3hot.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D3hot.  The
+		names of the links are the same as the names of the directories
+		they point to.
diff --git a/Documentation/ABI/testing/sysfs-devices-power_state b/Documentation/ABI/testing/sysfs-devices-power_state
new file mode 100644
index 000000000000..7ad9546748f0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power_state
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_state attribute is only present for
+		device objects representing ACPI device nodes that provide power
+		management methods.
+
+		If present, it contains a string representing the current ACPI
+		power state of the given device node.  Its possible values,
+		"D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+		names defined by the ACPI specification (ACPI 4 and above).
+
+		If the device node uses shared ACPI power resources, this state
+		determines a list of power resources required not to be turned
+		off.  However, some power resources needed by the device node in
+		higher-power (lower-number) states may also be ON because of
+		some other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-real_power_state b/Documentation/ABI/testing/sysfs-devices-real_power_state
new file mode 100644
index 000000000000..8b3527c82a7d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-real_power_state
@@ -0,0 +1,23 @@
+What:		/sys/devices/.../real_power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../real_power_state attribute is only present
+		for device objects representing ACPI device nodes that provide
+		power management methods and use ACPI power resources for power
+		management.
+
+		If present, it contains a string representing the real ACPI
+		power state of the given device node as returned by the _PSC
+		control method or inferred from the configuration of power
+		resources.  Its possible values, "D0", "D1", "D2", "D3hot", and
+		"D3cold", reflect the power state names defined by the ACPI
+		specification (ACPI 4 and above).
+
+		In some situations the value of this attribute may be different
+		from the value of the /sys/devices/.../power_state attribute for
+		the same device object.  If that happens, some shared power
+		resources used by the device node are only ON because of some
+		other devices using them at the moment.
+
+		This attribute is read-only.
diff --git a/Documentation/ABI/testing/sysfs-devices-resource_in_use b/Documentation/ABI/testing/sysfs-devices-resource_in_use
new file mode 100644
index 000000000000..b4a3bc5922a3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-resource_in_use
@@ -0,0 +1,12 @@
+What:		/sys/devices/.../resource_in_use
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../resource_in_use attribute is only present
+		for device objects representing ACPI power resources.
+
+		If present, it contains a number (0 or 1) representing the
+		current status of the given power resource (0 means that the
+		resource is not in use and therefore it has been turned off).
+
+		This attribute is read-only.
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 54469bc81b1c..94a656131885 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -63,8 +63,8 @@ from ACPI tables.
 Currently the kernel is not able to automatically determine from which ACPI
 device it should make the corresponding platform device so we need to add
 the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
-and I2C devices are created automatically as described below.
+drivers/acpi/acpi_platform.c. This limitation is only for the platform
+devices, SPI and I2C devices are created automatically as described below.
 
 SPI serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/acpi/scan_handlers.txt b/Documentation/acpi/scan_handlers.txt
new file mode 100644
index 000000000000..3246ccf15992
--- /dev/null
+++ b/Documentation/acpi/scan_handlers.txt
@@ -0,0 +1,77 @@
+ACPI Scan Handlers
+
+Copyright (C) 2012, Intel Corporation
+Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+During system initialization and ACPI-based device hot-add, the ACPI namespace
+is scanned in search of device objects that generally represent various pieces
+of hardware.  This causes a struct acpi_device object to be created and
+registered with the driver core for every device object in the ACPI namespace
+and the hierarchy of those struct acpi_device objects reflects the namespace
+layout (i.e. parent device objects in the namespace are represented by parent
+struct acpi_device objects and analogously for their children).  Those struct
+acpi_device objects are referred to as "device nodes" in what follows, but they
+should not be confused with struct device_node objects used by the Device Trees
+parsing code (although their role is analogous to the role of those objects).
+
+During ACPI-based device hot-remove device nodes representing pieces of hardware
+being removed are unregistered and deleted.
+
+The core ACPI namespace scanning code in drivers/acpi/scan.c carries out basic
+initialization of device nodes, such as retrieving common configuration
+information from the device objects represented by them and populating them with
+appropriate data, but some of them require additional handling after they have
+been registered.  For example, if the given device node represents a PCI host
+bridge, its registration should cause the PCI bus under that bridge to be
+enumerated and PCI devices on that bus to be registered with the driver core.
+Similarly, if the device node represents a PCI interrupt link, it is necessary
+to configure that link so that the kernel can use it.
+
+Those additional configuration tasks usually depend on the type of the hardware
+component represented by the given device node which can be determined on the
+basis of the device node's hardware ID (HID).  They are performed by objects
+called ACPI scan handlers represented by the following structure:
+
+struct acpi_scan_handler {
+	const struct acpi_device_id *ids;
+	struct list_head list_node;
+	int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
+	void (*detach)(struct acpi_device *dev);
+};
+
+where ids is the list of IDs of device nodes the given handler is supposed to
+take care of, list_node is the hook to the global list of ACPI scan handlers
+maintained by the ACPI core and the .attach() and .detach() callbacks are
+executed, respectively, after registration of new device nodes and before
+unregistration of device nodes the handler attached to previously.
+
+The namespace scanning function, acpi_bus_scan(), first registers all of the
+device nodes in the given namespace scope with the driver core.  Then, it tries
+to match a scan handler against each of them using the ids arrays of the
+available scan handlers.  If a matching scan handler is found, its .attach()
+callback is executed for the given device node.  If that callback returns 1,
+that means that the handler has claimed the device node and is now responsible
+for carrying out any additional configuration tasks related to it.  It also will
+be responsible for preparing the device node for unregistration in that case.
+The device node's handler field is then populated with the address of the scan
+handler that has claimed it.
+
+If the .attach() callback returns 0, it means that the device node is not
+interesting to the given scan handler and may be matched against the next scan
+handler in the list.  If it returns a (negative) error code, that means that
+the namespace scan should be terminated due to a serious error.  The error code
+returned should then reflect the type of the error.
+
+The namespace trimming function, acpi_bus_trim(), first executes .detach()
+callbacks from the scan handlers of all device nodes in the given namespace
+scope (if they have scan handlers).  Next, it unregisters all of the device
+nodes in that scope.
+
+ACPI scan handlers can be added to the list maintained by the ACPI core with the
+help of the acpi_scan_add_handler() function taking a pointer to the new scan
+handler as an argument.  The order in which scan handlers are added to the list
+is the order in which they are matched against device nodes during namespace
+scans.
+
+All scan handles must be added to the list before acpi_bus_scan() is run for the
+first time and they cannot be removed from it.
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index c436096351f8..72f70b16d299 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -111,6 +111,12 @@ policy->governor		must contain the "default policy" for
 For setting some of these values, the frequency table helpers might be
 helpful. See the section 2 for more information on them.
 
+SMP systems normally have same clock source for a group of cpus. For these the
+.init() would be called only once for the first online cpu. Here the .init()
+routine must initialize policy->cpus with mask of all possible cpus (Online +
+Offline) that share the clock. Then the core would copy this mask onto
+policy->related_cpus and will reset policy->cpus to carry only online cpus.
+
 
 1.3 verify
 ------------
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 04f6b32993e6..ff2f28332cc4 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -190,11 +190,11 @@ scaling_max_freq		show the current "policy limits" (in
 				first set scaling_max_freq, then
 				scaling_min_freq.
 
-affected_cpus :			List of CPUs that require software coordination
-				of frequency.
+affected_cpus :			List of Online CPUs that require software
+				coordination of frequency.
 
-related_cpus :			List of CPUs that need some sort of frequency
-				coordination, whether software or hardware.
+related_cpus :			List of Online + Offline CPUs that need software
+				coordination of frequency.
 
 scaling_driver :		Hardware driver for cpufreq.
 
diff --git a/Documentation/devicetree/bindings/arm/kirkwood.txt b/Documentation/devicetree/bindings/arm/kirkwood.txt
new file mode 100644
index 000000000000..98cce9a653eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/kirkwood.txt
@@ -0,0 +1,27 @@
+Marvell Kirkwood Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwood
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,kirkwood";
+
+In order to support the kirkwood cpufreq driver, there must be a node
+cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
+where the "powersave" clock is a gating clock used to switch the CPU
+between the "cpu_clk" and the "ddrclk".
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+		      device_type = "cpu";
+		      compatible = "marvell,sheeva-88SV131";
+		      clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+		      clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6c723811c0a0..4c5b3f993bbb 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1039,16 +1039,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Claim all unknown PCI IDE storage controllers.
 
 	idle=		[X86]
-			Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
+			Format: idle=poll, idle=halt, idle=nomwait
 			Poll forces a polling idle loop that can slightly
 			improve the performance of waking up a idle CPU, but
 			will use a lot of power and make the system run hot.
 			Not recommended.
-			idle=mwait: On systems which support MONITOR/MWAIT but
-			the kernel chose to not use it because it doesn't save
-			as much power as a normal idle loop, use the
-			MONITOR/MWAIT idle loop anyways. Performance should be
-			the same as idle=poll.
 			idle=halt: Halt is forced to be used for CPU idle.
 			In such case C2/C3 won't be used again.
 			idle=nomwait: Disable mwait for CPU C-states
@@ -1131,6 +1126,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			0	disables intel_idle and fall back on acpi_idle.
 			1 to 6	specify maximum depth of C-state.
 
+	intel_pstate=  [X86]
+		       disable
+		         Do not enable intel_pstate as the default
+		         scaling driver for the supported processors
+
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)
 			off	disable Interrupt Remapping
@@ -1886,10 +1886,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.
 
-	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
-			instruction doesn't work correctly and not to
-			use it.
-
 	no_file_caps	Tells the kernel not to honor file capabilities.  The
 			only way then for a file to be executed with privilege
 			is to be setuid root or executed by root.
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 6ec291ea1c78..85894d83b352 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -223,3 +223,8 @@ since they ask the freezer to skip freezing this task, since it is anyway
 only after the entire suspend/hibernation sequence is complete.
 So, to summarize, use [un]lock_system_sleep() instead of directly using
 mutex_[un]lock(&pm_mutex). That would prevent freezing failures.
+
+V. Miscellaneous
+/sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
+all user space processes or all freezable kernel threads, in unit of millisecond.
+The default value is 20000, with range of unsigned integer.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 03591a750f99..6c9f5d9aa115 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -426,6 +426,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       'power.runtime_error' is set or 'power.disable_depth' is greater than
       zero)
 
+  bool pm_runtime_active(struct device *dev);
+    - return true if the device's runtime PM status is 'active' or its
+      'power.disable_depth' field is not equal to zero, or false otherwise
+
   bool pm_runtime_suspended(struct device *dev);
     - return true if the device's runtime PM status is 'suspended' and its
       'power.disable_depth' field is equal to zero, or false otherwise
diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt
index cf794af22855..e1498ff8cf94 100644
--- a/Documentation/trace/events-power.txt
+++ b/Documentation/trace/events-power.txt
@@ -17,7 +17,7 @@ Cf. include/trace/events/power.h for the events definitions.
 1. Power state switch events
 ============================
 
-1.1 New trace API
+1.1 Trace API
 -----------------
 
 A 'cpu' event class gathers the CPU-related events: cpuidle and
@@ -41,31 +41,6 @@ The event which has 'state=4294967295' in the trace is very important to the use
 space tools which are using it to detect the end of the current state, and so to
 correctly draw the states diagrams and to calculate accurate statistics etc.
 
-1.2 DEPRECATED trace API
-------------------------
-
-A new Kconfig option CONFIG_EVENT_POWER_TRACING_DEPRECATED with the default value of
-'y' has been created. This allows the legacy trace power API to be used conjointly
-with the new trace API.
-The Kconfig option, the old trace API (in include/trace/events/power.h) and the
-old trace points will disappear in a future release (namely 2.6.41).
-
-power_start		"type=%lu state=%lu cpu_id=%lu"
-power_frequency		"type=%lu state=%lu cpu_id=%lu"
-power_end		"cpu_id=%lu"
-
-The 'type' parameter takes one of those macros:
- . POWER_NONE	= 0,
- . POWER_CSTATE	= 1,	/* C-State */
- . POWER_PSTATE	= 2,	/* Frequency change or DVFS */
-
-The 'state' parameter is set depending on the type:
- . Target C-state for type=POWER_CSTATE,
- . Target frequency for type=POWER_PSTATE,
-
-power_end is used to indicate the exit of a state, corresponding to the latest
-power_start event.
-
 2. Clocks events
 ================
 The clock events are used for clock enable/disable and for