Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

7 files changed, 126 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 5484c31d555f..2f0b7169f132 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,6 +49,8 @@ Boards:
     compatible = "renesas,genmai", "renesas,r7s72100"
   - Gose
     compatible = "renesas,gose", "renesas,r8a7793"
+  - H3ULCB (RTP0RC7795SKB00010S)
+    compatible = "renesas,h3ulcb", "renesas,r8a7795";
   - Henninger
     compatible = "renesas,henninger", "renesas,r8a7791"
   - Koelsch (RTP0RC7791SEB00010S)
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 000000000000..c248cd44f727
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,15 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt
index 407848e85f31..e7e3f3c4fc8f 100644
--- a/Documentation/devicetree/bindings/media/meson-ir.txt
+++ b/Documentation/devicetree/bindings/media/meson-ir.txt
@@ -1,7 +1,10 @@
 * Amlogic Meson IR remote control receiver
 
 Required properties:
- - compatible	: should be "amlogic,meson6-ir"
+ - compatible	: depending on the platform this should be one of:
+		  - "amlogic,meson6-ir"
+		  - "amlogic,meson8b-ir"
+		  - "amlogic,meson-gxbb-ir"
  - reg		: physical base address and length of the device registers
  - interrupts	: a single specifier for the interrupt from the device
 
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
index ec633d74a8a8..89e62ddc69ca 100644
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -1,18 +1,32 @@
 * Amlogic Meson DWMAC Ethernet controller
 
 The device inherits all the properties of the dwmac/stmmac devices
-described in the file net/stmmac.txt with the following changes.
+described in the file stmmac.txt in the current directory with the
+following changes.
 
-Required properties:
+Required properties on all platforms:
 
-- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac"
-	      and any applicable more detailed version number
-	      described in net/stmmac.txt
+- compatible:	Depending on the platform this should be one of:
+			- "amlogic,meson6-dwmac"
+			- "amlogic,meson8b-dwmac"
+			- "amlogic,meson-gxbb-dwmac"
+		Additionally "snps,dwmac" and any applicable more
+		detailed version number described in net/stmmac.txt
+		should be used.
 
-- reg: should contain a register range for the dwmac controller and
-       another one for the Amlogic specific configuration
+- reg:	The first register range should be the one of the DWMAC
+	controller. The second range is is for the Amlogic specific
+	configuration (for example the PRG_ETHERNET register range
+	on Meson8b and newer)
 
-Example:
+Required properties on Meson8b and newer:
+- clock-names:	Should contain the following:
+		- "stmmaceth" - see stmmac.txt
+		- "clkin0" - first parent clock of the internal mux
+		- "clkin1" - second parent clock of the internal mux
+
+
+Example for Meson6:
 
 	ethmac: ethernet@c9410000 {
 		compatible = "amlogic,meson6-dwmac", "snps,dwmac";
@@ -23,3 +37,18 @@ Example:
 		clocks = <&clk81>;
 		clock-names = "stmmaceth";
 	}
+
+Example for GXBB:
+	ethmac: ethernet@c9410000 {
+		compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+		reg = <0x0 0xc9410000 0x0 0x10000>,
+			<0x0 0xc8834540 0x0 0x8>;
+		interrupts = <0 8 1>;
+		interrupt-names = "macirq";
+		clocks = <&clkc CLKID_ETH>,
+				<&clkc CLKID_FCLK_DIV2>,
+				<&clkc CLKID_MPLL2>;
+		clock-names = "stmmaceth", "clkin0", "clkin1";
+		phy-mode = "rgmii";
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
new file mode 100644
index 000000000000..fafd85bd67a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@@ -0,0 +1,39 @@
+= Amlogic eFuse device tree bindings =
+
+Required properties:
+- compatible: should be "amlogic,meson-gxbb-efuse"
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+	eth_mac {
+		...
+		nvmem-cells = <&eth_mac>;
+		nvmem-cell-names = "eth_mac";
+	};
diff --git a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
new file mode 100644
index 000000000000..9da5ea234154
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt
@@ -0,0 +1,27 @@
+* Amlogic USB2 PHY
+
+Required properties:
+- compatible:	Depending on the platform this should be one of:
+	"amlogic,meson8b-usb2-phy"
+	"amlogic,meson-gxbb-usb2-phy"
+- reg:		The base address and length of the registers
+- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
+- clocks:	phandle and clock identifier for the phy clocks
+- clock-names:	"usb_general" and "usb"
+
+Optional properties:
+- resets:	reference to the reset controller
+- phy-supply:	see phy-bindings.txt in this directory
+
+
+Example:
+
+usb0_phy: usb_phy@0 {
+	compatible = "amlogic,meson-gxbb-usb2-phy";
+	#phy-cells = <0>;
+	reg = <0x0 0x0 0x0 0x20>;
+	resets = <&reset RESET_USB_OTG>;
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	phy-supply = <&usb_vbus>;
+};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 7d16ebfaa5a1..455f2c310a1b 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -10,6 +10,8 @@ Required properties:
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
+  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt