bitmap, irq: add smp_affinity_list interface to /proc/irq

Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the
cpu count is large.

Setting smp affinity to cpus 256 to 263 would be:

	echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity

instead of:

	echo 256-263 > smp_affinity_list

Think about what it looks like for cpus around say, 4088 to 4095.

We already have many alternate "list" interfaces:

/sys/devices/system/cpu/cpuX/indexY/shared_cpu_list
/sys/devices/system/cpu/cpuX/topology/thread_siblings_list
/sys/devices/system/cpu/cpuX/topology/core_siblings_list
/sys/devices/system/node/nodeX/cpulist
/sys/devices/pci***/***/local_cpulist

Add a companion interface, smp_affinity_list to use cpu lists instead of
cpu maps.  This conforms to other companion interfaces where both a map
and a list interface exists.

This required adding a bitmap_parselist_user() function in a manner
similar to the bitmap_parse_user() function.

[akpm@linux-foundation.org: make __bitmap_parselist() static]
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2 files changed, 22 insertions, 6 deletions

diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt
index b4a615b78403..7890fae18529 100644
--- a/Documentation/IRQ-affinity.txt
+++ b/Documentation/IRQ-affinity.txt
@@ -4,10 +4,11 @@ ChangeLog:
 
 SMP IRQ affinity
 
-/proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted
-for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed
-to turn off all CPUs, and if an IRQ controller does not support IRQ
-affinity then the value will not change from the default 0xffffffff.
+/proc/irq/IRQ#/smp_affinity and /proc/irq/IRQ#/smp_affinity_list specify
+which target CPUs are permitted for a given IRQ source.  It's a bitmask
+(smp_affinity) or cpu list (smp_affinity_list) of allowed CPUs.  It's not
+allowed to turn off all CPUs, and if an IRQ controller does not support
+IRQ affinity then the value will not change from the default of all cpus.
 
 /proc/irq/default_smp_affinity specifies default affinity mask that applies
 to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask
@@ -54,3 +55,11 @@ round-trip min/avg/max = 0.1/0.5/585.4 ms
 This time around IRQ44 was delivered only to the last four processors.
 i.e counters for the CPU0-3 did not change.
 
+Here is an example of limiting that same irq (44) to cpus 1024 to 1031:
+
+[root@moon 44]# echo 1024-1031 > smp_affinity
+[root@moon 44]# cat smp_affinity
+1024-1031
+
+Note that to do this with a bitmask would require 32 bitmasks of zero
+to follow the pertinent one.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 60740e8ecb37..f48178024067 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -574,6 +574,12 @@ The contents of each smp_affinity file is the same by default:
   > cat /proc/irq/0/smp_affinity
   ffffffff
 
+There is an alternate interface, smp_affinity_list which allows specifying
+a cpu range instead of a bitmask:
+
+  > cat /proc/irq/0/smp_affinity_list
+  1024-1031
+
 The default_smp_affinity mask applies to all non-active IRQs, which are the
 IRQs which have not yet been allocated/activated, and hence which lack a
 /proc/irq/[0-9]* directory.
@@ -583,12 +589,13 @@ reports itself as being attached. This hardware locality information does not
 include information about any possible driver locality preference.
 
 prof_cpu_mask specifies which CPUs are to be profiled by the system wide
-profiler. Default value is ffffffff (all cpus).
+profiler. Default value is ffffffff (all cpus if there are only 32 of them).
 
 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
 between all the CPUs which are allowed to handle it. As usual the kernel has
 more info than you and does a better job than you, so the defaults are the
-best choice for almost everyone.
+best choice for almost everyone.  [Note this applies only to those IO-APIC's
+that support "Round Robin" interrupt distribution.]
 
 There are  three  more  important subdirectories in /proc: net, scsi, and sys.
 The general  rule  is  that  the  contents,  or  even  the  existence of these