Merge tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

The i.MX device tree updates for 4.3:
 - Add audio and eTSEC device support and update dspi node for LS1021A.
 - Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable
   a bunch of device support for i.MX6UL, including RTC, power key, USB,
   QSPI, and dual FEC.
 - Enable HDMI and LVDS dual display support for a few imx6qdl boards.
 - Support of imx6sl-warp board rev1.12, the version which will be
   publicly available for the customers.
 - A few i.MX7D device additions, watchdog, cortex-a7 coresight
   components, RTC, power key, power off.
 - Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc.,
   update ADC node, and define stdout-path property.
 - A few random updates for i.MX27 and i.MX53 devices.

* tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
  ARM: dts: imx6ul: add snvs power key support
  ARM: dts: imx6ul: add RTC support
  ARM: dts: imx6ul: enable GPC as extended interrupt controller
  ARM: dts: imx6sx: correct property name for wakeup source
  ARM: dts: add property for maximum ADC clock frequencies
  ARM: dts: imx7d: enable snvs rtc, onoffkey and power off
  ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support
  ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL
  ARM: dts: imx27: add support of internal rtc
  ARM: dts: vf-colibri: define stdout-path property
  ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR
  ARM: dts: ls1021a: Add the eTSEC controller nodes
  ARM: dts: imx6ul: add qspi support
  ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h
  ARM: dts: imx6ul: add usb host and function support
  ARM: dts: vfxxx: Add io-channel-cells property for ADC node
  ARM: dts: ls1021a: Add dts nodes for audio on LS1021A
  ARM: imx6qdl-sabreauto.dtsi: enable USB support
  ARM: dts: imx: update snvs to use syscon access register
  ARM: dts: imx: add imx6ul and imx6ul evk board support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 49 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
new file mode 100644
index 000000000000..571d5039f663
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 000000000000..a81bbf37ed66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)