Merge branch 'linus' into perf/urgent, to resolve conflict

 Conflicts:
	arch/powerpc/configs/85xx/kmp204x_defconfig

Signed-off-by: Ingo Molnar <mingo@kernel.org>

5 files changed, 187 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
index e00c2e9f484d..c61bdf8cd41b 100644
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
@@ -6,8 +6,8 @@ Required properties:
   - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
   - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
-  the cells format.
+- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt
+  in this directory for a description of the cells format.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
@@ -17,7 +17,7 @@ See the clock consumer binding,
 Example:
 
 pwm1: pwm@53fb4000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 	reg = <0x53fb4000 0x4000>;
 	clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
index 66223d561972..20ca4ef9d776 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -17,6 +17,12 @@ Required properties:
 	calibration data, as specified by the SoC reference manual.
 	The first cell of each pair is the value to be written to TTCFGR,
 	and the second is the value to be written to TSCFGR.
+- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
+	site ID, and represents the "n" in TRITSRn and TRATSRn.
+
+Optional property:
+- little-endian : If present, the TMU registers are little endian. If absent,
+	the default is big endian.
 
 Example:
 
@@ -60,4 +66,5 @@ tmu@f0000 {
 
 			       0x00030000 0x00000012
 			       0x00030001 0x0000001d>;
+	#thermal-sensor-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
new file mode 100644
index 000000000000..07a9713ae6a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -0,0 +1,56 @@
+* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
+
+On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
+sensors (THS) which are the analog circuits for measuring temperature (Tj)
+inside the LSI.
+
+Required properties:
+- compatible		: "renesas,<soctype>-thermal",
+			  Examples with soctypes are:
+			    - "renesas,r8a7795-thermal" (R-Car H3)
+			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+- reg			: Address ranges of the thermal registers. Each sensor
+			  needs one address range. Sorting must be done in
+			  increasing order according to datasheet, i.e.
+			  TSC1, TSC2, ...
+- clocks		: Must contain a reference to the functional clock.
+- #thermal-sensor-cells : must be <1>.
+
+Optional properties:
+
+- interrupts           : interrupts routed to the TSC (3 for H3 and M3-W)
+- power-domain		: Must contain a reference to the power domain. This
+			  property is mandatory if the thermal sensor instance
+			  is part of a controllable power domain.
+
+Example:
+
+	tsc: thermal@e6198000 {
+		compatible = "renesas,r8a7795-thermal";
+		reg = <0 0xe6198000 0 0x68>,
+		      <0 0xe61a0000 0 0x5c>,
+		      <0 0xe61a8000 0 0x5c>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 522>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <1>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
new file mode 100644
index 000000000000..3dc1c6bf0478
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
@@ -0,0 +1,116 @@
+* ZTE zx2967 family Thermal
+
+Required Properties:
+- compatible: should be one of the following.
+    * zte,zx296718-thermal
+- reg: physical base address of the controller and length of memory mapped
+    region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "topcrm" for the topcrm clock.
+	       "apb" for the apb clock.
+- #thermal-sensor-cells: must be 0.
+
+Please note: slope coefficient defined in thermal-zones section need to be
+multiplied by 1000.
+
+Example for tempsensor:
+
+	tempsensor: tempsensor@148a000 {
+		compatible = "zte,zx296718-thermal";
+		reg = <0x0148a000 0x20>;
+		clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
+		clock-names = "topcrm", "apb";
+		#thermal-sensor-cells = <0>;
+	};
+
+Example for cooling device:
+
+	cooling_dev: cooling_dev {
+		cluster0_cooling_dev: cluster0-cooling-dev {
+			#cooling-cells = <2>;
+			cpumask = <0xf>;
+			capacitance = <1500>;
+		};
+
+	cluster1_cooling_dev: cluster1-cooling-dev {
+			#cooling-cells = <2>;
+			cpumask = <0x30>;
+			capacitance = <2000>;
+		};
+	};
+
+Example for thermal zones:
+
+	thermal-zones {
+		zx296718_thermal: zx296718_thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			sustainable-power = <6500>;
+
+			thermal-sensors = <&tempsensor 0>;
+			/*
+			 * slope need to be multiplied by 1000.
+			 */
+			coefficients = <1951 (-922)>;
+
+			trips {
+				trip0: switch_on_temperature {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1: desired_temperature {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				crit: critical_temperature {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&gpu 2 5>;
+				};
+
+				map1 {
+					trip = <&trip0>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map2 {
+					trip = <&trip1>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map3 {
+					trip = <&crit>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map4 {
+					trip = <&trip0>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <9000>;
+				};
+
+				map5 {
+					trip = <&trip1>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <4096>;
+				};
+
+				map6 {
+					trip = <&crit>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <4096>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
index 753dd4f96afe..4f6531a4701b 100644
--- a/Documentation/filesystems/f2fs.txt
+++ b/Documentation/filesystems/f2fs.txt
@@ -125,13 +125,14 @@ active_logs=%u         Support configuring the number of active logs. In the
 disable_ext_identify   Disable the extension list configured by mkfs, so f2fs
                        does not aware of cold files such as media files.
 inline_xattr           Enable the inline xattrs feature.
+noinline_xattr         Disable the inline xattrs feature.
 inline_data            Enable the inline data feature: New created small(<~3.4k)
                        files can be written into inode block.
 inline_dentry          Enable the inline dir feature: data in new created
                        directory entries can be written into inode block. The
                        space of inode block which is used to store inline
                        dentries is limited to ~3.4k.
-noinline_dentry        Diable the inline dentry feature.
+noinline_dentry        Disable the inline dentry feature.
 flush_merge	       Merge concurrent cache_flush commands as much as possible
                        to eliminate redundant command issues. If the underlying
 		       device handles the cache_flush command relatively slowly,
@@ -157,6 +158,8 @@ data_flush             Enable data flushing before checkpoint in order to
 mode=%s                Control block allocation mode which supports "adaptive"
                        and "lfs". In "lfs" mode, there should be no random
                        writes towards main area.
+io_bits=%u             Set the bit size of write IO requests. It should be set
+                       with "mode=lfs".
 
 ================================================================================
 DEBUGFS ENTRIES
@@ -174,7 +177,7 @@ f2fs. Each file shows the whole f2fs information.
 SYSFS ENTRIES
 ================================================================================
 
-Information about mounted f2f2 file systems can be found in
+Information about mounted f2fs file systems can be found in
 /sys/fs/f2fs.  Each mounted filesystem will have a directory in
 /sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda).
 The files in each per-device directory are shown in table below.