Merge branch 'master' of /home/trondmy/kernel/linux-2.6/

Conflicts:

	fs/nfs/inode.c
	fs/super.c

Fix conflicts between patch 'NFS: Split fs/nfs/inode.c' and patch
'VFS: Permit filesystem to override root dentry on mount'

53 files changed, 2181 insertions, 728 deletions

diff --git a/Documentation/ABI/README b/Documentation/ABI/README
new file mode 100644
index 000000000000..9feaf16f1617
--- /dev/null
+++ b/Documentation/ABI/README
@@ -0,0 +1,77 @@
+This directory attempts to document the ABI between the Linux kernel and
+userspace, and the relative stability of these interfaces.  Due to the
+everchanging nature of Linux, and the differing maturity levels, these
+interfaces should be used by userspace programs in different ways.
+
+We have four different levels of ABI stability, as shown by the four
+different subdirectories in this location.  Interfaces may change levels
+of stability according to the rules described below.
+
+The different levels of stability are:
+
+  stable/
+	This directory documents the interfaces that the developer has
+	defined to be stable.  Userspace programs are free to use these
+	interfaces with no restrictions, and backward compatibility for
+	them will be guaranteed for at least 2 years.  Most interfaces
+	(like syscalls) are expected to never change and always be
+	available.
+
+  testing/
+	This directory documents interfaces that are felt to be stable,
+	as the main development of this interface has been completed.
+	The interface can be changed to add new features, but the
+	current interface will not break by doing this, unless grave
+	errors or security problems are found in them.  Userspace
+	programs can start to rely on these interfaces, but they must be
+	aware of changes that can occur before these interfaces move to
+	be marked stable.  Programs that use these interfaces are
+	strongly encouraged to add their name to the description of
+	these interfaces, so that the kernel developers can easily
+	notify them if any changes occur (see the description of the
+	layout of the files below for details on how to do this.)
+
+  obsolete/
+  	This directory documents interfaces that are still remaining in
+	the kernel, but are marked to be removed at some later point in
+	time.  The description of the interface will document the reason
+	why it is obsolete and when it can be expected to be removed.
+	The file Documentation/feature-removal-schedule.txt may describe
+	some of these interfaces, giving a schedule for when they will
+	be removed.
+
+  removed/
+	This directory contains a list of the old interfaces that have
+	been removed from the kernel.
+
+Every file in these directories will contain the following information:
+
+What:		Short description of the interface
+Date:		Date created
+KernelVersion:	Kernel version this feature first showed up in.
+Contact:	Primary contact for this interface (may be a mailing list)
+Description:	Long description of the interface and how to use it.
+Users:		All users of this interface who wish to be notified when
+		it changes.  This is very important for interfaces in
+		the "testing" stage, so that kernel developers can work
+		with userspace developers to ensure that things do not
+		break in ways that are unacceptable.  It is also
+		important to get feedback for these interfaces to make
+		sure they are working in a proper way and do not need to
+		be changed further.
+
+
+How things move between levels:
+
+Interfaces in stable may move to obsolete, as long as the proper
+notification is given.
+
+Interfaces may be removed from obsolete and the kernel as long as the
+documented amount of time has gone by.
+
+Interfaces in the testing state can move to the stable state when the
+developers feel they are finished.  They cannot be removed from the
+kernel tree without going through the obsolete state first.
+
+It's up to the developer to place their interfaces in the category they
+wish for it to start out in.
diff --git a/Documentation/ABI/obsolete/devfs b/Documentation/ABI/obsolete/devfs
new file mode 100644
index 000000000000..b8b87399bc8f
--- /dev/null
+++ b/Documentation/ABI/obsolete/devfs
@@ -0,0 +1,13 @@
+What:		devfs
+Date:		July 2005
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+	devfs has been unmaintained for a number of years, has unfixable
+	races, contains a naming policy within the kernel that is
+	against the LSB, and can be replaced by using udev.
+	The files fs/devfs/*, include/linux/devfs_fs*.h will be removed,
+	along with the the assorted devfs function calls throughout the
+	kernel tree.
+
+Users:
+
diff --git a/Documentation/ABI/stable/syscalls b/Documentation/ABI/stable/syscalls
new file mode 100644
index 000000000000..c3ae3e7d6a0c
--- /dev/null
+++ b/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 000000000000..75be43118335
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,30 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will show up either if the module is built
+		directly into the kernel, or if it is loaded as a
+		dyanmic module.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.
diff --git a/Documentation/ABI/testing/sysfs-class b/Documentation/ABI/testing/sysfs-class
new file mode 100644
index 000000000000..4b0cb891e46e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class
@@ -0,0 +1,16 @@
+What:		/sys/class/
+Date:		Febuary 2006
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		The /sys/class directory will consist of a group of
+		subdirectories describing individual classes of devices
+		in the kernel.  The individual directories will consist
+		of either subdirectories, or symlinks to other
+		directories.
+
+		All programs that use this directory tree must be able
+		to handle both subdirectories or symlinks in order to
+		work properly.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
diff --git a/Documentation/ABI/testing/sysfs-devices b/Documentation/ABI/testing/sysfs-devices
new file mode 100644
index 000000000000..6a25671ee5f6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices
@@ -0,0 +1,25 @@
+What:		/sys/devices
+Date:		February 2006
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		The /sys/devices tree contains a snapshot of the
+		internal state of the kernel device tree.  Devices will
+		be added and removed dynamically as the machine runs,
+		and between different kernel versions, the layout of the
+		devices within this tree will change.
+
+		Please do not rely on the format of this tree because of
+		this.  If a program wishes to find different things in
+		the tree, please use the /sys/class structure and rely
+		on the symlinks there to point to the proper location
+		within the /sys/devices tree of the individual devices.
+		Or rely on the uevent messages to notify programs of
+		devices being added and removed from this tree to find
+		the location of those devices.
+
+		Note that sometimes not all devices along the directory
+		chain will have emitted uevent messages, so userspace
+		programs must be able to handle such occurrences.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index ce5d2c038cf5..6d2412ec91ed 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -155,7 +155,83 @@ problem, which is called the function-growth-hormone-imbalance syndrome.
 See next chapter.
 
 
-		Chapter 5: Functions
+		Chapter 5: Typedefs
+
+Please don't use things like "vps_t".
+
+It's a _mistake_ to use typedef for structures and pointers. When you see a
+
+	vps_t a;
+
+in the source, what does it mean?
+
+In contrast, if it says
+
+	struct virtual_container *a;
+
+you can actually tell what "a" is.
+
+Lots of people think that typedefs "help readability". Not so. They are
+useful only for:
+
+ (a) totally opaque objects (where the typedef is actively used to _hide_
+     what the object is).
+
+     Example: "pte_t" etc. opaque objects that you can only access using
+     the proper accessor functions.
+
+     NOTE! Opaqueness and "accessor functions" are not good in themselves.
+     The reason we have them for things like pte_t etc. is that there
+     really is absolutely _zero_ portably accessible information there.
+
+ (b) Clear integer types, where the abstraction _helps_ avoid confusion
+     whether it is "int" or "long".
+
+     u8/u16/u32 are perfectly fine typedefs, although they fit into
+     category (d) better than here.
+
+     NOTE! Again - there needs to be a _reason_ for this. If something is
+     "unsigned long", then there's no reason to do
+
+	typedef unsigned long myflags_t;
+
+     but if there is a clear reason for why it under certain circumstances
+     might be an "unsigned int" and under other configurations might be
+     "unsigned long", then by all means go ahead and use a typedef.
+
+ (c) when you use sparse to literally create a _new_ type for
+     type-checking.
+
+ (d) New types which are identical to standard C99 types, in certain
+     exceptional circumstances.
+
+     Although it would only take a short amount of time for the eyes and
+     brain to become accustomed to the standard types like 'uint32_t',
+     some people object to their use anyway.
+
+     Therefore, the Linux-specific 'u8/u16/u32/u64' types and their
+     signed equivalents which are identical to standard types are
+     permitted -- although they are not mandatory in new code of your
+     own.
+
+     When editing existing code which already uses one or the other set
+     of types, you should conform to the existing choices in that code.
+
+ (e) Types safe for use in userspace.
+
+     In certain structures which are visible to userspace, we cannot
+     require C99 types and cannot use the 'u32' form above. Thus, we
+     use __u32 and similar types in all structures which are shared
+     with userspace.
+
+Maybe there are other cases too, but the rule should basically be to NEVER
+EVER use a typedef unless you can clearly match one of those rules.
+
+In general, a pointer, or a struct that has elements that can reasonably
+be directly accessed should _never_ be a typedef.
+
+
+		Chapter 6: Functions
 
 Functions should be short and sweet, and do just one thing.  They should
 fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24,
@@ -183,7 +259,7 @@ and it gets confused.  You know you're brilliant, but maybe you'd like
 to understand what you did 2 weeks from now.
 
 
-		Chapter 6: Centralized exiting of functions
+		Chapter 7: Centralized exiting of functions
 
 Albeit deprecated by some people, the equivalent of the goto statement is
 used frequently by compilers in form of the unconditional jump instruction.
@@ -220,7 +296,7 @@ out:
 	return result;
 }
 
-		Chapter 7: Commenting
+		Chapter 8: Commenting
 
 Comments are good, but there is also a danger of over-commenting.  NEVER
 try to explain HOW your code works in a comment: it's much better to
@@ -240,7 +316,7 @@ When commenting the kernel API functions, please use the kerneldoc format.
 See the files Documentation/kernel-doc-nano-HOWTO.txt and scripts/kernel-doc
 for details.
 
-		Chapter 8: You've made a mess of it
+		Chapter 9: You've made a mess of it
 
 That's OK, we all do.  You've probably been told by your long-time Unix
 user helper that "GNU emacs" automatically formats the C sources for
@@ -288,7 +364,7 @@ re-formatting you may want to take a look at the man page.  But
 remember: "indent" is not a fix for bad programming.
 
 
-		Chapter 9: Configuration-files
+		Chapter 10: Configuration-files
 
 For configuration options (arch/xxx/Kconfig, and all the Kconfig files),
 somewhat different indentation is used.
@@ -313,7 +389,7 @@ support for file-systems, for instance) should be denoted (DANGEROUS), other
 experimental options should be denoted (EXPERIMENTAL).
 
 
-		Chapter 10: Data structures
+		Chapter 11: Data structures
 
 Data structures that have visibility outside the single-threaded
 environment they are created and destroyed in should always have
@@ -344,7 +420,7 @@ Remember: if another thread can find your data structure, and you don't
 have a reference count on it, you almost certainly have a bug.
 
 
-		Chapter 11: Macros, Enums and RTL
+		Chapter 12: Macros, Enums and RTL
 
 Names of macros defining constants and labels in enums are capitalized.
 
@@ -399,7 +475,7 @@ The cpp manual deals with macros exhaustively. The gcc internals manual also
 covers RTL which is used frequently with assembly language in the kernel.
 
 
-		Chapter 12: Printing kernel messages
+		Chapter 13: Printing kernel messages
 
 Kernel developers like to be seen as literate. Do mind the spelling
 of kernel messages to make a good impression. Do not use crippled
@@ -410,7 +486,7 @@ Kernel messages do not have to be terminated with a period.
 Printing numbers in parentheses (%d) adds no value and should be avoided.
 
 
-		Chapter 13: Allocating memory
+		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
 kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
@@ -429,7 +505,7 @@ from void pointer to any other pointer type is guaranteed by the C programming
 language.
 
 
-		Chapter 14: The inline disease
+		Chapter 15: The inline disease
 
 There appears to be a common misperception that gcc has a magic "make me
 faster" speedup option called "inline". While the use of inlines can be
@@ -457,7 +533,7 @@ something it would have done anyway.
 
 
 
-		Chapter 15: References
+		Appendix I: References
 
 The C Programming Language, Second Edition
 by Brian W. Kernighan and Dennis M. Ritchie.
@@ -481,4 +557,4 @@ Kernel CodingStyle, by greg@kroah.com at OLS 2002:
 http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
 
 --
-Last updated on 30 December 2005 by a community effort on LKML.
+Last updated on 30 April 2006.
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index ca02e04a906c..31b727ceb127 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -117,6 +117,7 @@ X!Ilib/string.c
   <chapter id="mm">
      <title>Memory Management in Linux</title>
      <sect1><title>The Slab Cache</title>
+!Iinclude/linux/slab.h
 !Emm/slab.c
      </sect1>
      <sect1><title>User Space Memory Access</title>
@@ -331,6 +332,18 @@ X!Earch/i386/kernel/mca.c
 !Esecurity/security.c
   </chapter>
 
+  <chapter id="audit">
+     <title>Audit Interfaces</title>
+!Ekernel/audit.c
+!Ikernel/auditsc.c
+!Ikernel/auditfilter.c
+  </chapter>
+
+  <chapter id="accounting">
+     <title>Accounting Framework</title>
+!Ikernel/acct.c
+  </chapter>
+
   <chapter id="pmfuncs">
      <title>Power Management</title>
 !Ekernel/power/pm.c
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index f869b03929db..e97c32314541 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -169,6 +169,22 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 
 	</sect2>
 
+	<sect2><title>PIO data read/write</title>
+	<programlisting>
+void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+	</programlisting>
+
+	<para>
+All bmdma-style drivers must implement this hook.  This is the low-level
+operation that actually copies the data bytes during a PIO data
+transfer.
+Typically the driver
+will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
+ata_mmio_data_xfer().
+	</para>
+
+	</sect2>
+
 	<sect2><title>ATA command execute</title>
 	<programlisting>
 void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
@@ -204,11 +220,10 @@ command.
 	<programlisting>
 u8   (*check_status)(struct ata_port *ap);
 u8   (*check_altstatus)(struct ata_port *ap);
-u8   (*check_err)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
-	Reads the Status/AltStatus/Error ATA shadow register from
+	Reads the Status/AltStatus ATA shadow register from
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
@@ -269,23 +284,6 @@ void (*set_mode) (struct ata_port *ap);
 
 	</sect2>
 
-	<sect2><title>Reset ATA bus</title>
-	<programlisting>
-void (*phy_reset) (struct ata_port *ap);
-	</programlisting>
-
-	<para>
-	The very first step in the probe phase.  Actions vary depending
-	on the bus type, typically.  After waking up the device and probing
-	for device presence (PATA and SATA), typically a soft reset
-	(SRST) will be performed.  Drivers typically use the helper
-	functions ata_bus_reset() or sata_phy_reset() for this hook.
-	Many SATA drivers use sata_phy_reset() or call it from within
-	their own phy_reset() functions.
-	</para>
-
-	</sect2>
-
 	<sect2><title>Control PCI IDE BMDMA engine</title>
 	<programlisting>
 void (*bmdma_setup) (struct ata_queued_cmd *qc);
@@ -354,16 +352,74 @@ int (*qc_issue) (struct ata_queued_cmd *qc);
 
 	</sect2>
 
-	<sect2><title>Timeout (error) handling</title>
+	<sect2><title>Exception and probe handling (EH)</title>
 	<programlisting>
 void (*eng_timeout) (struct ata_port *ap);
+void (*phy_reset) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+Deprecated.  Use ->error_handler() instead.
+	</para>
+
+	<programlisting>
+void (*freeze) (struct ata_port *ap);
+void (*thaw) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+ata_port_freeze() is called when HSM violations or some other
+condition disrupts normal operation of the port.  A frozen port
+is not allowed to perform any operation until the port is
+thawed, which usually follows a successful reset.
+	</para>
+
+	<para>
+The optional ->freeze() callback can be used for freezing the port
+hardware-wise (e.g. mask interrupt and stop DMA engine).  If a
+port cannot be frozen hardware-wise, the interrupt handler
+must ack and clear interrupts unconditionally while the port
+is frozen.
+	</para>
+	<para>
+The optional ->thaw() callback is called to perform the opposite of ->freeze():
+prepare the port for normal operation once again.  Unmask interrupts,
+start DMA engine, etc.
+	</para>
+
+	<programlisting>
+void (*error_handler) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+->error_handler() is a driver's hook into probe, hotplug, and recovery
+and other exceptional conditions.  The primary responsibility of an
+implementation is to call ata_do_eh() or ata_bmdma_drive_eh() with a set
+of EH hooks as arguments:
+	</para>
+
+	<para>
+'prereset' hook (may be NULL) is called during an EH reset, before any other actions
+are taken.
+	</para>
+
+	<para>
+'postreset' hook (may be NULL) is called after the EH reset is performed.  Based on
+existing conditions, severity of the problem, and hardware capabilities,
+	</para>
+
+	<para>
+Either 'softreset' (may be NULL) or 'hardreset' (may be NULL) will be
+called to perform the low-level EH reset.
+	</para>
+
+	<programlisting>
+void (*post_internal_cmd) (struct ata_queued_cmd *qc);
 	</programlisting>
 
 	<para>
-This is a high level error handling function, called from the
-error handling thread, when a command times out.  Most newer
-hardware will implement its own error handling code here.  IDE BMDMA
-drivers may use the helper function ata_eng_timeout().
+Perform any hardware-specific actions necessary to finish processing
+after executing a probe-time or EH-time command via ata_exec_internal().
 	</para>
 
 	</sect2>
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 07cb93b82ba9..6e459420ee9f 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -790,7 +790,6 @@ RCU pointer update:
 
 RCU grace period:
 
-	synchronize_kernel (deprecated)
 	synchronize_net
 	synchronize_sched
 	synchronize_rcu
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
new file mode 100644
index 000000000000..8230098da529
--- /dev/null
+++ b/Documentation/SubmitChecklist
@@ -0,0 +1,57 @@
+Linux Kernel patch sumbittal checklist
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Here are some basic things that developers should do if they
+want to see their kernel patch submittals accepted quicker.
+
+These are all above and beyond the documentation that is provided
+in Documentation/SubmittingPatches and elsewhere about submitting
+Linux kernel patches.
+
+
+
+- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n.
+  No gcc warnings/errors, no linker warnings/errors.
+
+- Passes allnoconfig, allmodconfig
+
+- Builds on multiple CPU arch-es by using local cross-compile tools
+  or something like PLM at OSDL.
+
+- ppc64 is a good architecture for cross-compilation checking because it
+  tends to use `unsigned long' for 64-bit quantities.
+
+- Matches kernel coding style(!)
+
+- Any new or modified CONFIG options don't muck up the config menu.
+
+- All new Kconfig options have help text.
+
+- Has been carefully reviewed with respect to relevant Kconfig
+  combinations.  This is very hard to get right with testing --
+  brainpower pays off here.
+
+- Check cleanly with sparse.
+
+- Use 'make checkstack' and 'make namespacecheck' and fix any
+  problems that they find.  Note:  checkstack does not point out
+  problems explicitly, but any one function that uses more than
+  512 bytes on the stack is a candidate for change.
+
+- Include kernel-doc to document global kernel APIs.  (Not required
+  for static functions, but OK there also.)  Use 'make htmldocs'
+  or 'make mandocs' to check the kernel-doc and fix any issues.
+
+- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
+  CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
+  CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
+  enabled.
+
+- Has been build- and runtime tested with and without CONFIG_SMP and
+  CONFIG_PREEMPT.
+
+- If the patch affects IO/Disk, etc: has been tested with and without
+  CONFIG_LBD.
+
+
+2006-APR-27
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index b369a8c46a73..b2f593fc76ca 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -3,7 +3,7 @@
 
 	     Maintained by Torben Mathiasen <device@lanana.org>
 
-		      Last revised: 25 January 2005
+		      Last revised: 01 March 2006
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating
@@ -94,7 +94,6 @@ Your cooperation is appreciated.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asyncronous I/O notification interface
 		 11 = /dev/kmsg		Writes to this come out as printk's
-		 12 = /dev/oldmem	Access to crash dump from kexec kernel
   1 block	RAM disk
 		  0 = /dev/ram0		First RAM disk
 		  1 = /dev/ram1		Second RAM disk
@@ -262,13 +261,13 @@ Your cooperation is appreciated.
 		NOTE: These devices permit both read and write access.
 
   7 block	Loopback devices
-		  0 = /dev/loop0	First loopback device
-		  1 = /dev/loop1	Second loopback device
+		  0 = /dev/loop0	First loop device
+		  1 = /dev/loop1	Second loop device
 		    ...
 
-		The loopback devices are used to mount filesystems not
+		The loop devices are used to mount filesystems not
 		associated with block devices.	The binding to the
-		loopback devices is handled by mount(8) or losetup(8).
+		loop devices is handled by mount(8) or losetup(8).
 
   8 block	SCSI disk devices (0-15)
 		  0 = /dev/sda		First SCSI disk whole disk
@@ -943,7 +942,7 @@ Your cooperation is appreciated.
 		240 = /dev/ftlp		FTL on 16th Memory Technology Device 
 
 		Partitions are handled in the same way as for IDE
-		disks (see major number 3) expect that the partition
+		disks (see major number 3) except that the partition
 		limit is 15 rather than 63 per disk (same as SCSI.)
 
  45 char	isdn4linux ISDN BRI driver
@@ -1168,7 +1167,7 @@ Your cooperation is appreciated.
 		The filename of the encrypted container and the passwords
 		are sent via ioctls (using the sdmount tool) to the master
 		node which then activates them via one of the
-		/dev/scramdisk/x nodes for loopback mounting (all handled
+		/dev/scramdisk/x nodes for loop mounting (all handled
 		through the sdmount tool).
 
 		Requested by: andy@scramdisklinux.org
@@ -2538,18 +2537,32 @@ Your cooperation is appreciated.
 		  0 = /dev/usb/lp0	First USB printer
 		    ...
 		 15 = /dev/usb/lp15	16th USB printer
-		 16 = /dev/usb/mouse0	First USB mouse
-		    ...
-		 31 = /dev/usb/mouse15	16th USB mouse
-		 32 = /dev/usb/ez0	First USB firmware loader
-		    ...
-		 47 = /dev/usb/ez15	16th USB firmware loader
 		 48 = /dev/usb/scanner0	First USB scanner
 		    ...
 		 63 = /dev/usb/scanner15 16th USB scanner
 		 64 = /dev/usb/rio500	Diamond Rio 500
 		 65 = /dev/usb/usblcd	USBLCD Interface (info@usblcd.de)
 		 66 = /dev/usb/cpad0	Synaptics cPad (mouse/LCD)
+		 96 = /dev/usb/hiddev0	1st USB HID device
+		    ...
+		111 = /dev/usb/hiddev15	16th USB HID device
+		112 = /dev/usb/auer0	1st auerswald ISDN device
+		    ...
+		127 = /dev/usb/auer15	16th auerswald ISDN device
+		128 = /dev/usb/brlvgr0	First Braille Voyager device
+		    ...
+		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
+		132 = /dev/usb/idmouse	ID Mouse (fingerprint scanner) device
+		133 = /dev/usb/sisusbvga1	First SiSUSB VGA device
+		    ...
+		140 = /dev/usb/sisusbvga8	Eigth SISUSB VGA device
+		144 = /dev/usb/lcd	USB LCD device
+		160 = /dev/usb/legousbtower0	1st USB Legotower device
+		    ...
+		175 = /dev/usb/legousbtower15	16th USB Legotower device
+		240 = /dev/usb/dabusb0	First daubusb device
+		    ...
+		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
 		0 = /dev/uba		First USB block device
@@ -2710,6 +2723,17 @@ Your cooperation is appreciated.
 		  1 = /dev/cpu/1/msr		MSRs on CPU 1
 		    ...
 
+202 block	Xen Virtual Block Device
+		  0 = /dev/xvda       First Xen VBD whole disk
+		  16 = /dev/xvdb      Second Xen VBD whole disk
+		  32 = /dev/xvdc      Third Xen VBD whole disk
+		    ...
+		  240 = /dev/xvdp     Sixteenth Xen VBD whole disk
+
+                Partitions are handled in the same way as for IDE
+                disks (see major number 3) except that the limit on
+                partitions is 15.
+
 203 char	CPU CPUID information
 		  0 = /dev/cpu/0/cpuid		CPUID on CPU 0
 		  1 = /dev/cpu/1/cpuid		CPUID on CPU 1
@@ -2747,11 +2771,26 @@ Your cooperation is appreciated.
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
-		 50 = /dev/ttyIOC40		Altix serial card
+		 50 = /dev/ttyIOC0		Altix serial card
+		    ...
+		 81 = /dev/ttyIOC31		Altix serial card
+		 82 = /dev/ttyVR0		NEC VR4100 series SIU
+		 83 = /dev/ttyVR1		NEC VR4100 series DSIU
+		 84 = /dev/ttyIOC84		Altix ioc4 serial card
+		    ...
+		 115 = /dev/ttyIOC115		Altix ioc4 serial card
+		 116 = /dev/ttySIOC0		Altix ioc3 serial card
+		    ...
+		 147 = /dev/ttySIOC31		Altix ioc3 serial card
+		 148 = /dev/ttyPSC0		PPC PSC - port 0
+		    ...
+		 153 = /dev/ttyPSC5		PPC PSC - port 5
+		 154 = /dev/ttyAT0		ATMEL serial port 0
 		    ...
-		 81 = /dev/ttyIOC431		Altix serial card
-		 82 = /dev/ttyVR0               NEC VR4100 series SIU
-		 83 = /dev/ttyVR1               NEC VR4100 series DSIU
+		 169 = /dev/ttyAT15		ATMEL serial port 15
+		 170 = /dev/ttyNX0		Hilscher netX serial port 0
+		    ...
+		 185 = /dev/ttyNX15		Hilscher netX serial port 15
 
 205 char	Low-density serial ports (alternate device)
 		  0 = /dev/culu0		Callout device for ttyLU0
@@ -2786,8 +2825,8 @@ Your cooperation is appreciated.
 		 50 = /dev/cuioc40		Callout device for ttyIOC40
 		    ...
 		 81 = /dev/cuioc431		Callout device for ttyIOC431
-		 82 = /dev/cuvr0                Callout device for ttyVR0
-		 83 = /dev/cuvr1                Callout device for ttyVR1
+		 82 = /dev/cuvr0		Callout device for ttyVR0
+		 83 = /dev/cuvr1		Callout device for ttyVR1
 
 
 206 char	OnStream SC-x0 tape devices
@@ -2897,7 +2936,6 @@ Your cooperation is appreciated.
 		    ...
 		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
 
-
 216 char	Bluetooth RFCOMM TTY devices
 		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
 		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device
@@ -3002,12 +3040,43 @@ Your cooperation is appreciated.
 		ioctl()'s can be used to rewind the tape regardless of
 		the device used to access it.
 
-231 char	InfiniBand MAD
+231 char	InfiniBand
 		0 = /dev/infiniband/umad0
 		1 = /dev/infiniband/umad1
-		 ...
+		  ...
+		63 = /dev/infiniband/umad63    63rd InfiniBandMad device
+		64 = /dev/infiniband/issm0     First InfiniBand IsSM device
+		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
+		  ...
+		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
+		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		  ...
+		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+
+232 char	Biometric Devices
+		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
+		1 = /dev/biometric/sensor0/iris		first iris sensor on first device
+		2 = /dev/biometric/sensor0/retina	first retina sensor on first device
+		3 = /dev/biometric/sensor0/voiceprint	first voiceprint sensor on first device
+		4 = /dev/biometric/sensor0/facial	first facial sensor on first device
+		5 = /dev/biometric/sensor0/hand		first hand sensor on first device
+		  ...
+		10 = /dev/biometric/sensor1/fingerprint	first fingerprint sensor on second device
+		  ...
+		20 = /dev/biometric/sensor2/fingerprint	first fingerprint sensor on third device
+		  ...
 
-232-239		UNASSIGNED
+233 char	PathScale InfiniPath interconnect
+		0 = /dev/ipath        Primary device for programs (any unit)
+		1 = /dev/ipath0       Access specifically to unit 0
+		2 = /dev/ipath1       Access specifically to unit 1
+		  ...
+		4 = /dev/ipath3       Access specifically to unit 3
+		129 = /dev/ipath_sma    Device used by Subnet Management Agent
+		130 = /dev/ipath_diag   Device used by diagnostics programs
+
+234-239		UNASSIGNED
 
 240-254 char	LOCAL/EXPERIMENTAL USE
 240-254 block	LOCAL/EXPERIMENTAL USE
@@ -3021,6 +3090,24 @@ Your cooperation is appreciated.
 		This major is reserved to assist the expansion to a
 		larger number space.  No device nodes with this major
 		should ever be created on the filesystem.
+		(This is probaly not true anymore, but I'll leave it
+		for now /Torben)
+
+---LARGE MAJORS!!!!!---
+
+256 char	Equinox SST multi-port serial boards
+		   0 = /dev/ttyEQ0	First serial port on first Equinox SST board
+		 127 = /dev/ttyEQ127	Last serial port on first Equinox SST board
+		 128 = /dev/ttyEQ128	First serial port on second Equinox SST board
+		  ...
+		1027 = /dev/ttyEQ1027	Last serial port on eighth Equinox SST board
+
+256 block	Resident Flash Disk Flash Translation Layer
+		  0 = /dev/rfda		First RFD FTL layer
+		 16 = /dev/rfdb		Second RFD FTL layer
+		  ...
+		240 = /dev/rfdp		16th RFD FTL layer
+
 
  ****	ADDITIONAL /dev DIRECTORY ENTRIES
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f50cf8fac3f0..027285d0c26c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -33,27 +33,12 @@ Who:	Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:	RCU API moves to EXPORT_SYMBOL_GPL
-When:	April 2006
-Files:	include/linux/rcupdate.h, kernel/rcupdate.c
-Why:	Outside of Linux, the only implementations of anything even
-	vaguely resembling RCU that I am aware of are in DYNIX/ptx,
-	VM/XA, Tornado, and K42.  I do not expect anyone to port binary
-	drivers or kernel modules from any of these, since the first two
-	are owned by IBM and the last two are open-source research OSes.
-	So these will move to GPL after a grace period to allow
-	people, who might be using implementations that I am not aware
-	of, to adjust to this upcoming change.
-Who:	Paul E. McKenney <paulmck@us.ibm.com>
-
----------------------------
-
 What:	raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When:	November 2005
+When:	November 2006
 Why:	Deprecated in favour of the new ioctl-based rawiso interface, which is
 	more efficient.  You should really be using libraw1394 for raw1394
 	access anyway.
-Who:	Jody McIntyre <scjody@steamballoon.com>
+Who:	Jody McIntyre <scjody@modernduck.com>
 
 ---------------------------
 
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 1045da582b9b..d31efbbdfe50 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -99,7 +99,7 @@ prototypes:
 	int (*sync_fs)(struct super_block *sb, int wait);
 	void (*write_super_lockfs) (struct super_block *);
 	void (*unlockfs) (struct super_block *);
-	int (*statfs) (struct super_block *, struct kstatfs *);
+	int (*statfs) (struct dentry *, struct kstatfs *);
 	int (*remount_fs) (struct super_block *, int *, char *);
 	void (*clear_inode) (struct inode *);
 	void (*umount_begin) (struct super_block *);
@@ -142,15 +142,16 @@ see also dquot_operations section.
 
 --------------------------- file_system_type ---------------------------
 prototypes:
-	struct super_block *(*get_sb) (struct file_system_type *, int,
-			const char *, void *);
+	struct int (*get_sb) (struct file_system_type *, int,
+			const char *, void *, struct vfsmount *);
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
 get_sb		yes		yes
 kill_sb		yes		yes
 
-->get_sb() returns error or a locked superblock (exclusive on ->s_umount).
+->get_sb() returns error or 0 with locked superblock attached to the vfsmount
+(exclusive on ->s_umount).
 ->kill_sb() takes a write-locked superblock, does all shutdown work on it,
 unlocks and drops the reference.
 
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index 2f388460cbe7..5531694059ab 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -50,10 +50,11 @@ Turn your foo_read_super() into a function that would return 0 in case of
 success and negative number in case of error (-EINVAL unless you have more
 informative error value to report).  Call it foo_fill_super().  Now declare
 
-struct super_block foo_get_sb(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data)
+int foo_get_sb(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *data, struct vfsmount *mnt)
 {
-	return get_sb_bdev(fs_type, flags, dev_name, data, ext2_fill_super);
+	return get_sb_bdev(fs_type, flags, dev_name, data, foo_fill_super,
+			   mnt);
 }
 
 (or similar with s/bdev/nodev/ or s/bdev/single/, depending on the kind of
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 3a2e5520c1e3..9d3aed628bc1 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -113,8 +113,8 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct super_block *(*get_sb) (struct file_system_type *, int,
-                                       const char *, void *);
+        struct int (*get_sb) (struct file_system_type *, int,
+                              const char *, void *, struct vfsmount *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;
         struct file_system_type * next;
@@ -211,7 +211,7 @@ struct super_operations {
         int (*sync_fs)(struct super_block *sb, int wait);
         void (*write_super_lockfs) (struct super_block *);
         void (*unlockfs) (struct super_block *);
-        int (*statfs) (struct super_block *, struct kstatfs *);
+        int (*statfs) (struct dentry *, struct kstatfs *);
         int (*remount_fs) (struct super_block *, int *, char *);
         void (*clear_inode) (struct inode *);
         void (*umount_begin) (struct super_block *);
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
new file mode 100644
index 000000000000..69cdb527d58f
--- /dev/null
+++ b/Documentation/hwmon/abituguru
@@ -0,0 +1,59 @@
+Kernel driver abituguru
+=======================
+
+Supported chips:
+  * Abit uGuru (Hardware Monitor part only)
+    Prefix: 'abituguru'
+    Addresses scanned: ISA 0x0E0
+    Datasheet: Not available, this driver is based on reverse engineering.
+	A "Datasheet" has been written based on the reverse engineering it
+	should be available in the same dir as this file under the name
+	abituguru-datasheet.
+
+Authors:
+	Hans de Goede <j.w.r.degoede@hhs.nl>,
+	(Initial reverse engineering done by Olle Sandberg
+	 <ollebull@gmail.com>)
+
+
+Module Parameters
+-----------------
+
+* force: bool		Force detection. Note this parameter only causes the
+			detection to be skipped, if the uGuru can't be read
+			the module initialization (insmod) will still fail.
+* fan_sensors: int	Tell the driver how many fan speed sensors there are
+			on your motherboard. Default: 0 (autodetect).
+* pwms: int		Tell the driver how many fan speed controls (fan
+			pwms) your motherboard has. Default: 0 (autodetect).
+* verbose: int		How verbose should the driver be? (0-3):
+			   0 normal output
+			   1 + verbose error reporting
+			   2 + sensors type probing info\n"
+			   3 + retryable error reporting
+			Default: 2 (the driver is still in the testing phase)
+
+Notice if you need any of the first three options above please insmod the
+driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
+dmesg | grep abituguru
+
+
+Description
+-----------
+
+This driver supports the hardware monitoring features of the Abit uGuru chip
+found on Abit uGuru featuring motherboards (most modern Abit motherboards).
+
+The uGuru chip in reality is a Winbond W83L950D in disguise (despite Abit
+claiming it is "a new microprocessor designed by the ABIT Engineers").
+Unfortunatly this doesn't help since the W83L950D is a generic
+microcontroller with a custom Abit application running on it.
+
+Despite Abit not releasing any information regarding the uGuru, Olle
+Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part
+of the uGuru. Without his work this driver would not have been possible.
+
+Known Issues
+------------
+
+The voltage and frequency control parts of the Abit uGuru are not supported.
diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet
new file mode 100644
index 000000000000..aef5a9b36846
--- /dev/null
+++ b/Documentation/hwmon/abituguru-datasheet
@@ -0,0 +1,312 @@
+uGuru datasheet
+===============
+
+First of all, what I know about uGuru is no fact based on any help, hints or
+datasheet from Abit. The data I have got on uGuru have I assembled through
+my weak knowledge in "backwards engineering".
+And just for the record, you may have noticed uGuru isn't a chip developed by
+Abit, as they claim it to be. It's realy just an microprocessor (uC) created by
+Winbond (W83L950D). And no, reading the manual for this specific uC or
+mailing  Windbond for help won't give any usefull data about uGuru, as it is
+the program inside the uC that is responding to calls.
+
+Olle Sandberg <ollebull@gmail.com>, 2005-05-25
+
+
+Original version by Olle Sandberg who did the heavy lifting of the initial
+reverse engineering. This version has been almost fully rewritten for clarity
+and extended with write support and info on more databanks, the write support
+is once again reverse engineered by Olle the additional databanks have been
+reverse engineered by me. I would like to express my thanks to Olle, this
+document and the Linux driver could not have been written without his efforts.
+
+Note: because of the lack of specs only the sensors part of the uGuru is
+described here and not the CPU / RAM / etc voltage & frequency control.
+
+Hans de Goede <j.w.r.degoede@hhs.nl>, 28-01-2006
+
+
+Detection
+=========
+
+As far as known the uGuru is always placed at and using the (ISA) I/O-ports
+0xE0 and 0xE4, so we don't have to scan any port-range, just check what the two
+ports are holding for detection. We will refer to 0xE0 as CMD (command-port)
+and 0xE4 as DATA because Abit refers to them with these names.
+
+If DATA holds 0x00 or 0x08 and CMD holds 0x00 or 0xAC an uGuru could be
+present. We have to check for two different values at data-port, because
+after a reboot uGuru will hold 0x00 here, but if the driver is removed and
+later on attached again data-port will hold 0x08, more about this later.
+
+After wider testing of the Linux kernel driver some variants of the uGuru have
+turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also
+have to test CMD for two different values. On these uGuru's DATA will initally
+hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read
+first!
+
+To be really sure an uGuru is present a test read of one or more register
+sets should be done.
+
+
+Reading / Writing
+=================
+
+Addressing
+----------
+
+The uGuru has a number of different addressing levels. The first addressing
+level we will call banks. A bank holds data for one or more sensors. The data
+in a bank for a sensor is one or more bytes large.
+
+The number of bytes is fixed for a given bank, you should always read or write
+that many bytes, reading / writing more will fail, the results when writing
+less then the number of bytes for a given bank are undetermined.
+
+See below for all known bank addresses, numbers of sensors in that bank,
+number of bytes data per sensor and contents/meaning of those bytes.
+
+Although both this document and the kernel driver have kept the sensor
+terminoligy for the addressing within a bank this is not 100% correct, in
+bank 0x24 for example the addressing within the bank selects a PWM output not
+a sensor.
+
+Notice that some banks have both a read and a write address this is how the
+uGuru determines if a read from or a write to the bank is taking place, thus
+when reading you should always use the read address and when writing the
+write address. The write address is always one (1) more then the read address.
+
+
+uGuru ready
+-----------
+
+Before you can read from or write to the uGuru you must first put the uGuru
+in "ready" mode.
+
+To put the uGuru in ready mode first write 0x00 to DATA and then wait for DATA
+to hold 0x09, DATA should read 0x09 within 250 read cycles.
+
+Next CMD _must_ be read and should hold 0xAC, usually CMD will hold 0xAC the
+first read but sometimes it takes a while before CMD holds 0xAC and thus it
+has to be read a number of times (max 50).
+
+After reading CMD, DATA should hold 0x08 which means that the uGuru is ready
+for input. As above DATA will usually hold 0x08 the first read but not always.
+This step can be skipped, but it is undetermined what happens if the uGuru has
+not yet reported 0x08 at DATA and you proceed with writing a bank address.
+
+
+Sending bank and sensor addresses to the uGuru
+----------------------------------------------
+
+First the uGuru must be in "ready" mode as described above, DATA should hold
+0x08 indicating that the uGuru wants input, in this case the bank address.
+
+Next write the bank address to DATA. After the bank address has been written
+wait for to DATA to hold 0x08 again indicating that it wants / is ready for
+more input (max 250 reads).
+
+Once DATA holds 0x08 again write the sensor address to CMD.
+
+
+Reading
+-------
+
+First send the bank and sensor addresses as described above.
+Then for each byte of data you want to read wait for DATA to hold 0x01
+which indicates that the uGuru is ready to be read (max 250 reads) and once
+DATA holds 0x01 read the byte from CMD.
+
+Once all bytes have been read data will hold 0x09, but there is no reason to
+test for this. Notice that the number of bytes is bank address dependent see
+above and below.
+
+After completing a successfull read it is advised to put the uGuru back in
+ready mode, so that it is ready for the next read / write cycle. This way
+if your program / driver is unloaded and later loaded again the detection
+algorithm described above will still work.
+
+
+
+Writing
+-------
+
+First send the bank and sensor addresses as described above.
+Then for each byte of data you want to write wait for DATA to hold 0x00
+which indicates that the uGuru is ready to be written (max 250 reads) and
+once DATA holds 0x00 write the byte to CMD.
+
+Once all bytes have been written wait for DATA to hold 0x01 (max 250 reads)
+don't ask why this is the way it is.
+
+Once DATA holds 0x01 read CMD it should hold 0xAC now.
+
+After completing a successfull write it is advised to put the uGuru back in
+ready mode, so that it is ready for the next read / write cycle. This way
+if your program / driver is unloaded and later loaded again the detection
+algorithm described above will still work.
+
+
+Gotchas
+-------
+
+After wider testing of the Linux kernel driver some variants of the uGuru have
+turned up which do not hold 0x08 at DATA within 250 reads after writing the
+bank address. With these versions this happens quite frequent, using larger
+timeouts doesn't help, they just go offline for a second or 2, doing some
+internal callibration or whatever. Your code should be prepared to handle
+this and in case of no response in this specific case just goto sleep for a
+while and then retry.
+
+
+Address Map
+===========
+
+Bank 0x20 Alarms (R)
+--------------------
+This bank contains 0 sensors, iow the sensor address is ignored (but must be
+written) just use 0. Bank 0x20 contains 3 bytes:
+
+Byte 0:
+This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0
+corresponding to sensor 0, 1 to 1, etc.
+
+Byte 1:
+This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0
+corresponding to sensor 8, 1 to 9, etc.
+
+Byte 2:
+This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0
+corresponding to sensor 0, 1 to 1, etc.
+
+
+Bank 0x21 Sensor Bank1 Values / Readings (R)
+--------------------------------------------
+This bank contains 16 sensors, for each sensor it contains 1 byte.
+So far the following sensors are known to be available on all motherboards:
+Sensor  0 CPU temp
+Sensor  1 SYS temp
+Sensor  3 CPU core volt
+Sensor  4 DDR volt
+Sensor 10 DDR Vtt volt
+Sensor 15 PWM temp
+
+Byte 0:
+This byte holds the reading from the sensor. Sensors in Bank1 can be both
+volt and temp sensors, this is motherboard specific. The uGuru however does
+seem to know (be programmed with) what kindoff sensor is attached see Sensor
+Bank1 Settings description.
+
+Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
+reading of 255 with 3494 mV. The sensors for higher voltages however are
+connected through a division circuit. The currently known division circuits
+in use result in ranges of: 0-4361mV, 0-6248mV or 0-14510mV. 3.3 volt sources
+use the 0-4361mV range, 5 volt the 0-6248mV and 12 volt the 0-14510mV .
+
+Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree
+Celsius and a reading of 255 with a reading of 255 degrees Celsius.
+
+
+Bank 0x22 Sensor Bank1 Settings (R)
+Bank 0x23 Sensor Bank1 Settings (W)
+-----------------------------------
+
+This bank contains 16 sensors, for each sensor it contains 3 bytes. Each
+set of 3 bytes contains the settings for the sensor with the same sensor
+address in Bank 0x21 .
+
+Byte 0:
+Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
+Bit 0: Give an alarm if measured temp is over the warning threshold	(RW) *
+Bit 1: Give an alarm if measured volt is over the max threshold		(RW) **
+Bit 2: Give an alarm if measured volt is under the min threshold	(RW) **
+Bit 3: Beep if alarm							(RW)
+Bit 4: 1 if alarm cause measured temp is over the warning threshold	(R)
+Bit 5: 1 if alarm cause measured volt is over the max threshold		(R)
+Bit 6: 1 if alarm cause measured volt is under the min threshold	(R)
+Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds	(RW)
+       Temp sensor: Shutdown if temp is over the shutdown threshold	(RW)
+
+*  This bit is only honored/used by the uGuru if a temp sensor is connected
+** This bit is only honored/used by the uGuru if a volt sensor is connected
+Note with some trickery this can be used to find out what kinda sensor is
+detected see the Linux kernel driver for an example with many comments on
+how todo this.
+
+Byte 1:
+Temp sensor: warning threshold  (scale as bank 0x21)
+Volt sensor: min threshold      (scale as bank 0x21)
+
+Byte 2:
+Temp sensor: shutdown threshold (scale as bank 0x21)
+Volt sensor: max threshold      (scale as bank 0x21)
+
+
+Bank 0x24 PWM outputs for FAN's (R)
+Bank 0x25 PWM outputs for FAN's (W)
+-----------------------------------
+
+This bank contains 3 "sensors", for each sensor it contains 5 bytes.
+Sensor 0 usually controls the CPU fan
+Sensor 1 usually controls the NB (or chipset for single chip) fan
+Sensor 2 usually controls the System fan
+
+Byte 0:
+Flag 0x80 to enable control, Fan runs at 100% when disabled.
+low nibble (temp)sensor address at bank 0x21 used for control.
+
+Byte 1:
+0-255 = 0-12v (linear), specify voltage at which fan will rotate when under
+low threshold temp (specified in byte 3)
+
+Byte 2:
+0-255 = 0-12v (linear), specify voltage at which fan will rotate when above
+high threshold temp (specified in byte 4)
+
+Byte 3:
+Low threshold temp  (scale as bank 0x21)
+
+byte 4:
+High threshold temp (scale as bank 0x21)
+
+
+Bank 0x26 Sensors Bank2 Values / Readings (R)
+---------------------------------------------
+
+This bank contains 6 sensors (AFAIK), for each sensor it contains 1 byte.
+So far the following sensors are known to be available on all motherboards:
+Sensor 0: CPU fan speed
+Sensor 1: NB (or chipset for single chip) fan speed
+Sensor 2: SYS fan speed
+
+Byte 0:
+This byte holds the reading from the sensor. 0-255 = 0-15300 (linear)
+
+
+Bank 0x27 Sensors Bank2 Settings (R)
+Bank 0x28 Sensors Bank2 Settings (W)
+------------------------------------
+
+This bank contains 6 sensors (AFAIK), for each sensor it contains 2 bytes.
+
+Byte 0:
+Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
+Bit 0: Give an alarm if measured rpm is under the min threshold	(RW)
+Bit 3: Beep if alarm						(RW)
+Bit 7: Shutdown if alarm persist for more then 4 seconds	(RW)
+
+Byte 1:
+min threshold (scale as bank 0x26)
+
+
+Warning for the adventerous
+===========================
+
+A word of caution to those who want to experiment and see if they can figure
+the voltage / clock programming out, I tried reading and only reading banks
+0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
+resulted in a _permanent_ reprogramming of the voltages, luckily I had the
+sensors part configured so that it would shutdown my system on any out of spec
+voltages which proprably safed my computer (after a reboot I managed to
+immediatly enter the bios and reload the defaults). This probably means that
+the read/write cycle for the non sensor part is different from the sensor part.
diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70
new file mode 100644
index 000000000000..2bdd3feebf53
--- /dev/null
+++ b/Documentation/hwmon/lm70
@@ -0,0 +1,31 @@
+Kernel driver lm70
+==================
+
+Supported chip:
+  * National Semiconductor LM70
+    Datasheet: http://www.national.com/pf/LM/LM70.html
+
+Author:
+        Kaiwan N Billimoria <kaiwan@designergraphix.com>
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM70
+temperature sensor.
+
+The LM70 temperature sensor chip supports a single temperature sensor.
+It communicates with a host processor (or microcontroller) via an
+SPI/Microwire Bus interface.
+
+Communication with the LM70 is simple: when the temperature is to be sensed,
+the driver accesses the LM70 using SPI communication: 16 SCLK cycles
+comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
+complement digital temperature (sent via the SIO line), is available in the
+driver for interpretation. This driver makes use of the kernel's in-core
+SPI support.
+
+Thanks to
+---------
+Jean Delvare <khali@linux-fr.org> for mentoring the hwmon-side driver
+development.
diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83
index 061d9ed8ff43..f7aad1489cb0 100644
--- a/Documentation/hwmon/lm83
+++ b/Documentation/hwmon/lm83
@@ -7,6 +7,10 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM83.html
+  * National Semiconductor LM82
+    Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM82.html
 
 
 Author: Jean Delvare <khali@linux-fr.org>
@@ -15,10 +19,11 @@ Description
 -----------
 
 The LM83 is a digital temperature sensor. It senses its own temperature as
-well as the temperature of up to three external diodes. It is compatible
-with many other devices such as the LM84 and all other ADM1021 clones.
-The main difference between the LM83 and the LM84 in that the later can
-only sense the temperature of one external diode.
+well as the temperature of up to three external diodes. The LM82 is
+a stripped down version of the LM83 that only supports one external diode.
+Both are compatible with many other devices such as the LM84 and all
+other ADM1021 clones. The main difference between the LM83 and the LM84
+in that the later can only sense the temperature of one external diode.
 
 Using the adm1021 driver for a LM83 should work, but only two temperatures
 will be reported instead of four.
@@ -30,12 +35,16 @@ contact us. Note that the LM90 can easily be misdetected as a LM83.
 
 Confirmed motherboards:
     SBS         P014
+    SBS         PSL09
 
 Unconfirmed motherboards:
     Gigabyte    GA-8IK1100
     Iwill       MPX2
     Soltek      SL-75DRV5
 
+The LM82 is confirmed to have been found on most AMD Geode reference
+designs and test platforms.
+
 The driver has been successfully tested by Magnus Forsström, who I'd
 like to thank here. More testers will be of course welcome.
 
diff --git a/Documentation/hwmon/smsc47m192 b/Documentation/hwmon/smsc47m192
new file mode 100644
index 000000000000..45d6453cd435
--- /dev/null
+++ b/Documentation/hwmon/smsc47m192
@@ -0,0 +1,102 @@
+Kernel driver smsc47m192
+========================
+
+Supported chips:
+  * SMSC LPC47M192 and LPC47M997
+    Prefix: 'smsc47m192'
+    Addresses scanned: I2C 0x2c - 0x2d
+    Datasheet: The datasheet for LPC47M192 is publicly available from
+               http://www.smsc.com/
+               The LPC47M997 is compatible for hardware monitoring.
+
+Author: Hartmut Rick <linux@rick.claranet.de>
+        Special thanks to Jean Delvare for careful checking
+        of the code and many helpful comments and suggestions.
+
+
+Description
+-----------
+
+This driver implements support for the hardware sensor capabilities
+of the SMSC LPC47M192 and LPC47M997 Super-I/O chips.
+
+These chips support 3 temperature channels and 8 voltage inputs
+as well as CPU voltage VID input.
+
+They do also have fan monitoring and control capabilities, but the
+these features are accessed via ISA bus and are not supported by this
+driver. Use the 'smsc47m1' driver for fan monitoring and control.
+
+Voltages and temperatures are measured by an 8-bit ADC, the resolution
+of the temperatures is 1 bit per degree C.
+Voltages are scaled such that the nominal voltage corresponds to
+192 counts, i.e. 3/4 of the full range. Thus the available range for
+each voltage channel is 0V ... 255/192*(nominal voltage), the resolution
+is 1 bit per (nominal voltage)/192.
+Both voltage and temperature values are scaled by 1000, the sys files
+show voltages in mV and temperatures in units of 0.001 degC.
+
+The +12V analog voltage input channel (in4_input) is multiplexed with
+bit 4 of the encoded CPU voltage. This means that you either get
+a +12V voltage measurement or a 5 bit CPU VID, but not both.
+The default setting is to use the pin as 12V input, and use only 4 bit VID.
+This driver assumes that the information in the configuration register
+is correct, i.e. that the BIOS has updated the configuration if
+the motherboard has this input wired to VID4.
+
+The temperature and voltage readings are updated once every 1.5 seconds.
+Reading them more often repeats the same values.
+
+
+sysfs interface
+---------------
+
+in0_input	- +2.5V voltage input
+in1_input	- CPU voltage input (nominal 2.25V)
+in2_input	- +3.3V voltage input
+in3_input	- +5V voltage input
+in4_input	- +12V voltage input (may be missing if used as VID4)
+in5_input	- Vcc voltage input (nominal 3.3V)
+		  This is the supply voltage of the sensor chip itself.
+in6_input	- +1.5V voltage input
+in7_input	- +1.8V voltage input
+
+in[0-7]_min,
+in[0-7]_max	- lower and upper alarm thresholds for in[0-7]_input reading
+
+		  All voltages are read and written in mV.
+
+in[0-7]_alarm	- alarm flags for voltage inputs
+		  These files read '1' in case of alarm, '0' otherwise.
+
+temp1_input	- chip temperature measured by on-chip diode
+temp[2-3]_input	- temperature measured by external diodes (one of these would
+		  typically be wired to the diode inside the CPU)
+
+temp[1-3]_min,
+temp[1-3]_max	- lower and upper alarm thresholds for temperatures
+
+temp[1-3]_offset - temperature offset registers
+		  The chip adds the offsets stored in these registers to
+		  the corresponding temperature readings.
+		  Note that temp1 and temp2 offsets share the same register,
+		  they cannot both be different from zero at the same time.
+		  Writing a non-zero number to one of them will reset the other
+		  offset to zero.
+
+		  All temperatures and offsets are read and written in
+		  units of 0.001 degC.
+
+temp[1-3]_alarm - alarm flags for temperature inputs, '1' in case of alarm,
+		  '0' otherwise.
+temp[2-3]_input_fault - diode fault flags for temperature inputs 2 and 3.
+		  A fault is detected if the two pins for the corresponding
+		  sensor are open or shorted, or any of the two is shorted
+		  to ground or Vcc. '1' indicates a diode fault.
+
+cpu0_vid	- CPU voltage as received from the CPU
+
+vrm		- CPU VID standard used for decoding CPU voltage
+
+		  The *_min, *_max, *_offset and vrm files can be read and
+		  written, all others are read-only.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index a0d0ab24288e..d1d390aaf620 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -3,15 +3,15 @@ Naming and data format standards for sysfs files
 
 The libsensors library offers an interface to the raw sensors data
 through the sysfs interface. See libsensors documentation and source for
-more further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependant. Adding or updating
+further information. As of writing this document, libsensors
+(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
 support for any given chip requires modifying the library's code.
 This is because libsensors was written for the procfs interface
 older kernel modules were using, which wasn't standardized enough.
 Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
 support for the sysfs interface, though.
 
-The new sysfs interface was designed to be as chip-independant as
+The new sysfs interface was designed to be as chip-independent as
 possible.
 
 Note that motherboards vary widely in the connections to sensor chips.
@@ -24,7 +24,7 @@ range using external resistors. Since the values of these resistors
 can change from motherboard to motherboard, the conversions cannot be
 hard coded into the driver and have to be done in user space.
 
-For this reason, even if we aim at a chip-independant libsensors, it will
+For this reason, even if we aim at a chip-independent libsensors, it will
 still require a configuration file (e.g. /etc/sensors.conf) for proper
 values conversion, labeling of inputs and hiding of unused inputs.
 
@@ -39,15 +39,16 @@ If you are developing a userspace application please send us feedback on
 this standard.
 
 Note that this standard isn't completely established yet, so it is subject
-to changes, even important ones. One more reason to use the library instead
-of accessing sysfs files directly.
+to changes. If you are writing a new hardware monitoring driver those
+features can't seem to fit in this interface, please contact us with your
+extension proposal. Keep in mind that backward compatibility must be
+preserved.
 
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
-find all sensor chips, it is easier to follow the symlinks from
-/sys/i2c/devices/
+find all sensor chips, it is easier to follow the device symlinks from
+/sys/class/hwmon/hwmon*.
 
-All sysfs values are fixed point numbers.  To get the true value of some
-of the values, you should divide by the specified value.
+All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.
 The common scheme for files naming is: <type><number>_<item>. Usual
@@ -69,28 +70,40 @@ to cause an alarm) is chip-dependent.
 
 -------------------------------------------------------------------------
 
+[0-*]	denotes any positive number starting from 0
+[1-*]	denotes any positive number starting from 1
+RO	read only value
+RW	read/write value
+
+Read/write values may be read-only for some chips, depending on the
+hardware implementation.
+
+All entries are optional, and should only be created in a given driver
+if the chip has the feature.
+
 ************
 * Voltages *
 ************
 
-in[0-8]_min	Voltage min value.
+in[0-*]_min	Voltage min value.
 		Unit: millivolt
-		Read/Write
+		RW
 		
-in[0-8]_max	Voltage max value.
+in[0-*]_max	Voltage max value.
 		Unit: millivolt
-		Read/Write
+		RW
 		
-in[0-8]_input	Voltage input value.
+in[0-*]_input	Voltage input value.
 		Unit: millivolt
-		Read only
+		RO
+		Voltage measured on the chip pin.
 		Actual voltage depends on the scaling resistors on the
 		motherboard, as recommended in the chip datasheet.
 		This varies by chip and by motherboard.
 		Because of this variation, values are generally NOT scaled
 		by the chip driver, and must be done by the application.
 		However, some drivers (notably lm87 and via686a)
-		do scale, with various degrees of success.
+		do scale, because of internal resistors built into a chip.
 		These drivers will output the actual voltage.
 
 		Typical usage:
@@ -104,58 +117,72 @@ in[0-8]_input	Voltage input value.
 			in7_*	varies
 			in8_*	varies
 
-cpu[0-1]_vid	CPU core reference voltage.
+cpu[0-*]_vid	CPU core reference voltage.
 		Unit: millivolt
-		Read only.
+		RO
 		Not always correct.
 
 vrm		Voltage Regulator Module version number. 
-		Read only.
-		Two digit number, first is major version, second is
-		minor version.
+		RW (but changing it should no more be necessary)
+		Originally the VRM standard version multiplied by 10, but now
+		an arbitrary number, as not all standards have a version
+		number.
 		Affects the way the driver calculates the CPU core reference
 		voltage from the vid pins.
 
+Also see the Alarms section for status flags associated with voltages.
+
 
 ********
 * Fans *
 ********
 
-fan[1-3]_min	Fan minimum value
+fan[1-*]_min	Fan minimum value
 		Unit: revolution/min (RPM)
-		Read/Write.
+		RW
 
-fan[1-3]_input	Fan input value.
+fan[1-*]_input	Fan input value.
 		Unit: revolution/min (RPM)
-		Read only.
+		RO
 
-fan[1-3]_div	Fan divisor.
+fan[1-*]_div	Fan divisor.
 		Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128).
+		RW
 		Some chips only support values 1, 2, 4 and 8.
 		Note that this is actually an internal clock divisor, which
 		affects the measurable speed range, not the read value.
 
+Also see the Alarms section for status flags associated with fans.
+
+
 *******
 * PWM *
 *******
 
-pwm[1-3]	Pulse width modulation fan control.
+pwm[1-*]	Pulse width modulation fan control.
 		Integer value in the range 0 to 255
-		Read/Write
+		RW
 		255 is max or 100%.
 
-pwm[1-3]_enable
+pwm[1-*]_enable
 		Switch PWM on and off.
 		Not always present even if fan*_pwm is.
-		0 to turn off
-		1 to turn on in manual mode
-		2 to turn on in automatic mode
-		Read/Write
+		0: turn off
+		1: turn on in manual mode
+		2+: turn on in automatic mode
+		Check individual chip documentation files for automatic mode details.
+		RW
+
+pwm[1-*]_mode
+		0: DC mode
+		1: PWM mode
+		RW
 
 pwm[1-*]_auto_channels_temp
 		Select which temperature channels affect this PWM output in
 		auto mode. Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc...
 		Which values are possible depend on the chip used.
+		RW
 
 pwm[1-*]_auto_point[1-*]_pwm
 pwm[1-*]_auto_point[1-*]_temp
@@ -163,6 +190,7 @@ pwm[1-*]_auto_point[1-*]_temp_hyst
 		Define the PWM vs temperature curve. Number of trip points is
 		chip-dependent. Use this for chips which associate trip points
 		to PWM output channels.
+		RW
 
 OR
 
@@ -172,50 +200,57 @@ temp[1-*]_auto_point[1-*]_temp_hyst
 		Define the PWM vs temperature curve. Number of trip points is
 		chip-dependent. Use this for chips which associate trip points
 		to temperature channels.
+		RW
 
 
 ****************
 * Temperatures *
 ****************
 
-temp[1-3]_type	Sensor type selection.
+temp[1-*]_type	Sensor type selection.
 		Integers 1 to 4 or thermistor Beta value (typically 3435)
-		Read/Write.
+		RW
 		1: PII/Celeron Diode
 		2: 3904 transistor
 		3: thermal diode
 		4: thermistor (default/unknown Beta)
 		Not all types are supported by all chips
 
-temp[1-4]_max	Temperature max value.
-		Unit: millidegree Celcius
-		Read/Write value.
+temp[1-*]_max	Temperature max value.
+		Unit: millidegree Celsius (or millivolt, see below)
+		RW
 
-temp[1-3]_min	Temperature min value.
-		Unit: millidegree Celcius
-		Read/Write value.
+temp[1-*]_min	Temperature min value.
+		Unit: millidegree Celsius
+		RW
 
-temp[1-3]_max_hyst
+temp[1-*]_max_hyst
 		Temperature hysteresis value for max limit.
-		Unit: millidegree Celcius
+		Unit: millidegree Celsius
 		Must be reported as an absolute temperature, NOT a delta
 		from the max value.
-		Read/Write value.
+		RW
 
-temp[1-4]_input Temperature input value.
-		Unit: millidegree Celcius
-		Read only value.
+temp[1-*]_input Temperature input value.
+		Unit: millidegree Celsius
+		RO
 
-temp[1-4]_crit	Temperature critical value, typically greater than
+temp[1-*]_crit	Temperature critical value, typically greater than
 		corresponding temp_max values.
-		Unit: millidegree Celcius
-		Read/Write value.
+		Unit: millidegree Celsius
+		RW
 
-temp[1-2]_crit_hyst
+temp[1-*]_crit_hyst
 		Temperature hysteresis value for critical limit.
-		Unit: millidegree Celcius
+		Unit: millidegree Celsius
 		Must be reported as an absolute temperature, NOT a delta
 		from the critical value.
+		RW
+
+temp[1-4]_offset
+		Temperature offset which is added to the temperature reading
+		by the chip.
+		Unit: millidegree Celsius
 		Read/Write value.
 
 		If there are multiple temperature sensors, temp1_* is
@@ -225,6 +260,17 @@ temp[1-2]_crit_hyst
 		itself, for example the thermal diode inside the CPU or
 		a thermistor nearby.
 
+Some chips measure temperature using external thermistors and an ADC, and
+report the temperature measurement as a voltage. Converting this voltage
+back to a temperature (or the other way around for limits) requires
+mathematical functions not available in the kernel, so the conversion
+must occur in user space. For these chips, all temp* files described
+above should contain values expressed in millivolt instead of millidegree
+Celsius. In other words, such temperature channels are handled as voltage
+channels by the driver.
+
+Also see the Alarms section for status flags associated with temperatures.
+
 
 ************
 * Currents *
@@ -233,25 +279,88 @@ temp[1-2]_crit_hyst
 Note that no known chip provides current measurements as of writing,
 so this part is theoretical, so to say.
 
-curr[1-n]_max	Current max value
+curr[1-*]_max	Current max value
 		Unit: milliampere
-		Read/Write.
+		RW
 
-curr[1-n]_min	Current min value.
+curr[1-*]_min	Current min value.
 		Unit: milliampere
-		Read/Write.
+		RW
 
-curr[1-n]_input	Current input value
+curr[1-*]_input	Current input value
 		Unit: milliampere
-		Read only.
+		RO
 
 
-*********
-* Other *
-*********
+**********
+* Alarms *
+**********
+
+Each channel or limit may have an associated alarm file, containing a
+boolean value. 1 means than an alarm condition exists, 0 means no alarm.
+
+Usually a given chip will either use channel-related alarms, or
+limit-related alarms, not both. The driver should just reflect the hardware
+implementation.
+
+in[0-*]_alarm
+fan[1-*]_alarm
+temp[1-*]_alarm
+		Channel alarm
+		0: no alarm
+		1: alarm
+		RO
+
+OR
+
+in[0-*]_min_alarm
+in[0-*]_max_alarm
+fan[1-*]_min_alarm
+temp[1-*]_min_alarm
+temp[1-*]_max_alarm
+temp[1-*]_crit_alarm
+		Limit alarm
+		0: no alarm
+		1: alarm
+		RO
+
+Each input channel may have an associated fault file. This can be used
+to notify open diodes, unconnected fans etc. where the hardware
+supports it. When this boolean has value 1, the measurement for that
+channel should not be trusted.
+
+in[0-*]_input_fault
+fan[1-*]_input_fault
+temp[1-*]_input_fault
+		Input fault condition
+		0: no fault occured
+		1: fault condition
+		RO
+
+Some chips also offer the possibility to get beeped when an alarm occurs:
+
+beep_enable	Master beep enable
+		0: no beeps
+		1: beeps
+		RW
+
+in[0-*]_beep
+fan[1-*]_beep
+temp[1-*]_beep
+		Channel beep
+		0: disable
+		1: enable
+		RW
+
+In theory, a chip could provide per-limit beep masking, but no such chip
+was seen so far.
+
+Old drivers provided a different, non-standard interface to alarms and
+beeps. These interface files are deprecated, but will be kept around
+for compatibility reasons:
 
 alarms		Alarm bitmask.
-		Read only.
+		RO
 		Integer representation of one to four bytes.
 		A '1' bit means an alarm.
 		Chips should be programmed for 'comparator' mode so that
@@ -259,35 +368,26 @@ alarms		Alarm bitmask.
 		if it is still valid.
 		Generally a direct representation of a chip's internal
 		alarm registers; there is no standard for the position
-		of individual bits.
+		of individual bits. For this reason, the use of this
+		interface file for new drivers is discouraged. Use
+		individual *_alarm and *_fault files instead.
 		Bits are defined in kernel/include/sensors.h.
 
-alarms_in	Alarm bitmask relative to in (voltage) channels
-		Read only
-		A '1' bit means an alarm, LSB corresponds to in0 and so on
-		Prefered to 'alarms' for newer chips
-
-alarms_fan	Alarm bitmask relative to fan channels
-		Read only
-		A '1' bit means an alarm, LSB corresponds to fan1 and so on
-		Prefered to 'alarms' for newer chips
-
-alarms_temp	Alarm bitmask relative to temp (temperature) channels
-		Read only
-		A '1' bit means an alarm, LSB corresponds to temp1 and so on
-		Prefered to 'alarms' for newer chips
+beep_mask	Bitmask for beep.
+		Same format as 'alarms' with the same bit locations,
+		use discouraged for the same reason. Use individual
+		*_beep files instead.
+		RW
 
-beep_enable	Beep/interrupt enable
-		0 to disable.
-		1 to enable.
-		Read/Write
 
-beep_mask	Bitmask for beep.
-		Same format as 'alarms' with the same bit locations.
-		Read/Write
+*********
+* Other *
+*********
 
 eeprom		Raw EEPROM data in binary form.
-		Read only.
+		RO
 
 pec		Enable or disable PEC (SMBus only)
-		Read/Write
+		0: disable
+		1: enable
+		RW
diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools
index 2622aac65422..19900a8fe679 100644
--- a/Documentation/hwmon/userspace-tools
+++ b/Documentation/hwmon/userspace-tools
@@ -6,31 +6,32 @@ voltages, fans speed). They are often connected through an I2C bus, but some
 are also connected directly through the ISA bus.
 
 The kernel drivers make the data from the sensor chips available in the /sys
-virtual filesystem. Userspace tools are then used to display or set or the
-data in a more friendly manner.
+virtual filesystem. Userspace tools are then used to display the measured
+values or configure the chips in a more friendly manner.
 
 Lm-sensors
 ----------
 
-Core set of utilites that will allow you to obtain health information,
+Core set of utilities that will allow you to obtain health information,
 setup monitoring limits etc. You can get them on their homepage
 http://www.lm-sensors.nu/ or as a package from your Linux distribution.
 
 If from website:
-Get lmsensors from project web site. Please note, you need only userspace
-part, so compile with "make user_install" target.
+Get lm-sensors from project web site. Please note, you need only userspace
+part, so compile with "make user" and install with "make user_install".
 
 General hints to get things working:
 
 0) get lm-sensors userspace utils
-1) compile all drivers in I2C section as modules in your kernel
+1) compile all drivers in I2C and Hardware Monitoring sections as modules
+   in your kernel
 2) run sensors-detect script, it will tell you what modules you need to load.
 3) load them and run "sensors" command, you should see some results.
 4) fix sensors.conf, labels, limits, fan divisors
 5) if any more problems consult FAQ, or documentation
 
-Other utilites
---------------
+Other utilities
+---------------
 
 If you want some graphical indicators of system health look for applications
 like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
new file mode 100644
index 000000000000..83a3836289c2
--- /dev/null
+++ b/Documentation/hwmon/w83791d
@@ -0,0 +1,113 @@
+Kernel driver w83791d
+=====================
+
+Supported chips:
+  * Winbond W83791D
+    Prefix: 'w83791d'
+    Addresses scanned: I2C 0x2c - 0x2f
+    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791Da.pdf
+
+Author: Charles Spirakis <bezaur@gmail.com>
+
+This driver was derived from the w83781d.c and w83792d.c source files.
+
+Credits:
+  w83781d.c:
+    Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>,
+    and Mark Studebaker <mdsxyz123@yahoo.com>
+  w83792d.c:
+    Chunhao Huang <DZShen@Winbond.com.tw>,
+    Rudolf Marek <r.marek@sh.cvut.cz>
+
+Module Parameters
+-----------------
+
+* init boolean
+  (default 0)
+  Use 'init=1' to have the driver do extra software initializations.
+  The default behavior is to do the minimum initialization possible
+  and depend on the BIOS to properly setup the chip. If you know you
+  have a w83791d and you're having problems, try init=1 before trying
+  reset=1.
+
+* reset boolean
+  (default 0)
+  Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+  behavior is no chip reset to preserve BIOS settings.
+
+* force_subclients=bus,caddr,saddr,saddr
+  This is used to force the i2c addresses for subclients of
+  a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b'
+  to force the subclients of chip 0x2f on bus 0 to i2c addresses
+  0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for the Winbond W83791D chip.
+
+Detection of the chip can sometimes be foiled because it can be in an
+internal state that allows no clean access (Bank with ID register is not
+currently selected). If you know the address of the chip, use a 'force'
+parameter; this will put it into a more well-behaved state first.
+
+The driver implements three temperature sensors, five fan rotation speed
+sensors, and ten voltage sensors.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
+the temperature gets higher than the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3
+and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more
+range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+Alarms are provided as output from a "realtime status register". The
+following bits are defined:
+
+bit - alarm on:
+0  - Vcore
+1  - VINR0
+2  - +3.3VIN
+3  - 5VDD
+4  - temp1
+5  - temp2
+6  - fan1
+7  - fan2
+8  - +12VIN
+9  - -12VIN
+10 - -5VIN
+11 - fan3
+12 - chassis
+13 - temp3
+14 - VINR1
+15 - reserved
+16 - tart1
+17 - tart2
+18 - tart3
+19 - VSB
+20 - VBAT
+21 - fan4
+22 - fan5
+23 - reserved
+
+When an alarm goes off, you can be warned by a beeping signal through your
+computer speaker. It is possible to enable all beeping globally, or only
+the beeping for some alarms.
+
+The driver only reads the chip values each 3 seconds; reading them more
+often will do no harm, but will return 'old' values.
+
+W83791D TODO:
+---------------
+Provide a patch for per-file alarms as discussed on the mailing list
+Provide a patch for smart-fan control (still need appropriate motherboard/fans)
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index fd4b2712d570..e46c23458242 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,8 +21,7 @@ Authors:
 Module Parameters
 -----------------
 
-* force_addr: int
-  Forcibly enable the ICH at the given address. EXTREMELY DANGEROUS!
+None.
 
 
 Description
diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2
index d751282d9b2a..cd49c428a3ab 100644
--- a/Documentation/i2c/busses/i2c-nforce2
+++ b/Documentation/i2c/busses/i2c-nforce2
@@ -7,6 +7,8 @@ Supported adapters:
   * nForce3 250Gb MCP          10de:00E4 
   * nForce4 MCP                10de:0052
   * nForce4 MCP-04             10de:0034
+  * nForce4 MCP51              10de:0264
+  * nForce4 MCP55              10de:0368
 
 Datasheet: not publically available, but seems to be similar to the
            AMD-8111 SMBus 2.0 adapter.
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
new file mode 100644
index 000000000000..cfcebb10d14e
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -0,0 +1,51 @@
+Kernel driver i2c-ocores
+
+Supported adapters:
+  * OpenCores.org I2C controller by Richard Herveille (see datasheet link)
+    Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview
+
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+
+Description
+-----------
+
+i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller
+IP core by Richard Herveille.
+
+Usage
+-----
+
+i2c-ocores uses the platform bus, so you need to provide a struct
+platform_device with the base address and interrupt number. The
+dev.platform_data of the device should also point to a struct
+ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
+distance between registers and the input clock speed.
+
+E.G. something like:
+
+static struct resource ocores_resources[] = {
+	[0] = {
+		.start	= MYI2C_BASEADDR,
+		.end	= MYI2C_BASEADDR + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MYI2C_IRQ,
+		.end	= MYI2C_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ocores_i2c_platform_data myi2c_data = {
+	.regstep	= 2,		/* two bytes between registers */
+	.clock_khz	= 50000,	/* input clock of 50MHz */
+};
+
+static struct platform_device myi2c = {
+	.name			= "ocores-i2c",
+	.dev = {
+		.platform_data	= &myi2c_data,
+	},
+	.num_resources		= ARRAY_SIZE(ocores_resources),
+	.resource		= ocores_resources,
+};
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index a1c8f581afed..921476333235 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -6,6 +6,8 @@ Supported adapters:
     Datasheet: Publicly available at the Intel website
   * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
     Datasheet: Only available via NDA from ServerWorks
+  * ATI IXP southbridges IXP200, IXP300, IXP400
+    Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
 
@@ -21,8 +23,6 @@ Module Parameters
   Forcibly enable the PIIX4. DANGEROUS!
 * force_addr: int
   Forcibly enable the PIIX4 at the given address. EXTREMELY DANGEROUS!
-* fix_hstcfg: int
-  Fix config register. Needed on some boards (Force CPCI735).
 
 
 Description
@@ -63,10 +63,36 @@ The PIIX4E is just an new version of the PIIX4; it is supported as well.
 The PIIX/PIIX3 does not implement an SMBus or I2C bus, so you can't use
 this driver on those mainboards.
 
-The ServerWorks Southbridges, the Intel 440MX, and the Victory766 are
+The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are
 identical to the PIIX4 in I2C/SMBus support.
 
-A few OSB4 southbridges are known to be misconfigured by the BIOS. In this
-case, you have you use the fix_hstcfg module parameter. Do not use it
-unless you know you have to, because in some cases it also breaks
-configuration on southbridges that don't need it.
+If you own Force CPCI735 motherboard or other OSB4 based systems you may need
+to change the SMBus Interrupt Select register so the SMBus controller uses
+the SMI mode.
+
+1) Use lspci command and locate the PCI device with the SMBus controller:
+   00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
+   The line may vary for different chipsets. Please consult the driver source
+   for all possible PCI ids (and lspci -n to match them). Lets assume the
+   device is located at 00:0f.0.
+2) Now you just need to change the value in 0xD2 register. Get it first with
+   command: lspci -xxx -s 00:0f.0
+   If the value is 0x3 then you need to change it to 0x1
+   setpci  -s 00:0f.0 d2.b=1
+
+Please note that you don't need to do that in all cases, just when the SMBus is
+not working properly.
+
+
+Hardware-specific issues
+------------------------
+
+This driver will refuse to load on IBM systems with an Intel PIIX4 SMBus.
+Some of these machines have an RFID EEPROM (24RF08) connected to the SMBus,
+which can easily get corrupted due to a state machine bug. These are mostly
+Thinkpad laptops, but desktop systems may also be affected. We have no list
+of all affected systems, so the only safe solution was to prevent access to
+the SMBus on all IBM systems (detected using DMI data.)
+
+For additional information, read:
+http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad
diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb
index f50e69981ec6..7c07883d4dfc 100644
--- a/Documentation/i2c/busses/scx200_acb
+++ b/Documentation/i2c/busses/scx200_acb
@@ -2,14 +2,31 @@ Kernel driver scx200_acb
 
 Author: Christer Weinigel <wingel@nano-system.com>
 
+The driver supersedes the older, never merged driver named i2c-nscacb.
+
 Module Parameters
 -----------------
 
-* base: int
+* base: up to 4 ints
   Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
+  By default the driver uses two base addresses 0x820 and 0x840.
+  If you want only one base address, specify the second as 0 so as to
+  override this default.
+
 Description
 -----------
 
 Enable the use of the ACCESS.bus controller on the Geode SCx200 and
 SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+
+Device-specific notes
+---------------------
+
+The SC1100 WRAP boards are known to use base addresses 0x810 and 0x820.
+If the scx200_acb driver is built into the kernel, add the following
+parameter to your boot command line:
+  scx200_acb.base=0x810,0x820
+If the scx200_acb driver is built as a module, add the following line to
+the file /etc/modprobe.conf instead:
+  options scx200_acb base=0x810,0x820
diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.txt
new file mode 100644
index 000000000000..38f9a52d1820
--- /dev/null
+++ b/Documentation/ia64/aliasing.txt
@@ -0,0 +1,208 @@
+	         MEMORY ATTRIBUTE ALIASING ON IA-64
+
+			   Bjorn Helgaas
+		       <bjorn.helgaas@hp.com>
+			    May 4, 2006
+
+
+MEMORY ATTRIBUTES
+
+    Itanium supports several attributes for virtual memory references.
+    The attribute is part of the virtual translation, i.e., it is
+    contained in the TLB entry.  The ones of most interest to the Linux
+    kernel are:
+
+	WB		Write-back (cacheable)
+	UC		Uncacheable
+	WC		Write-coalescing
+
+    System memory typically uses the WB attribute.  The UC attribute is
+    used for memory-mapped I/O devices.  The WC attribute is uncacheable
+    like UC is, but writes may be delayed and combined to increase
+    performance for things like frame buffers.
+
+    The Itanium architecture requires that we avoid accessing the same
+    page with both a cacheable mapping and an uncacheable mapping[1].
+
+    The design of the chipset determines which attributes are supported
+    on which regions of the address space.  For example, some chipsets
+    support either WB or UC access to main memory, while others support
+    only WB access.
+
+MEMORY MAP
+
+    Platform firmware describes the physical memory map and the
+    supported attributes for each region.  At boot-time, the kernel uses
+    the EFI GetMemoryMap() interface.  ACPI can also describe memory
+    devices and the attributes they support, but Linux/ia64 currently
+    doesn't use this information.
+
+    The kernel uses the efi_memmap table returned from GetMemoryMap() to
+    learn the attributes supported by each region of physical address
+    space.  Unfortunately, this table does not completely describe the
+    address space because some machines omit some or all of the MMIO
+    regions from the map.
+
+    The kernel maintains another table, kern_memmap, which describes the
+    memory Linux is actually using and the attribute for each region.
+    This contains only system memory; it does not contain MMIO space.
+
+    The kern_memmap table typically contains only a subset of the system
+    memory described by the efi_memmap.  Linux/ia64 can't use all memory
+    in the system because of constraints imposed by the identity mapping
+    scheme.
+
+    The efi_memmap table is preserved unmodified because the original
+    boot-time information is required for kexec.
+
+KERNEL IDENTITY MAPPINGS
+
+    Linux/ia64 identity mappings are done with large pages, currently
+    either 16MB or 64MB, referred to as "granules."  Cacheable mappings
+    are speculative[2], so the processor can read any location in the
+    page at any time, independent of the programmer's intentions.  This
+    means that to avoid attribute aliasing, Linux can create a cacheable
+    identity mapping only when the entire granule supports cacheable
+    access.
+
+    Therefore, kern_memmap contains only full granule-sized regions that
+    can referenced safely by an identity mapping.
+
+    Uncacheable mappings are not speculative, so the processor will
+    generate UC accesses only to locations explicitly referenced by
+    software.  This allows UC identity mappings to cover granules that
+    are only partially populated, or populated with a combination of UC
+    and WB regions.
+
+USER MAPPINGS
+
+    User mappings are typically done with 16K or 64K pages.  The smaller
+    page size allows more flexibility because only 16K or 64K has to be
+    homogeneous with respect to memory attributes.
+
+POTENTIAL ATTRIBUTE ALIASING CASES
+
+    There are several ways the kernel creates new mappings:
+
+    mmap of /dev/mem
+
+	This uses remap_pfn_range(), which creates user mappings.  These
+	mappings may be either WB or UC.  If the region being mapped
+	happens to be in kern_memmap, meaning that it may also be mapped
+	by a kernel identity mapping, the user mapping must use the same
+	attribute as the kernel mapping.
+
+	If the region is not in kern_memmap, the user mapping should use
+	an attribute reported as being supported in the EFI memory map.
+
+	Since the EFI memory map does not describe MMIO on some
+	machines, this should use an uncacheable mapping as a fallback.
+
+    mmap of /sys/class/pci_bus/.../legacy_mem
+
+	This is very similar to mmap of /dev/mem, except that legacy_mem
+	only allows mmap of the one megabyte "legacy MMIO" area for a
+	specific PCI bus.  Typically this is the first megabyte of
+	physical address space, but it may be different on machines with
+	several VGA devices.
+
+	"X" uses this to access VGA frame buffers.  Using legacy_mem
+	rather than /dev/mem allows multiple instances of X to talk to
+	different VGA cards.
+
+	The /dev/mem mmap constraints apply.
+
+	However, since this is for mapping legacy MMIO space, WB access
+	does not make sense.  This matters on machines without legacy
+	VGA support: these machines may have WB memory for the entire
+	first megabyte (or even the entire first granule).
+
+	On these machines, we could mmap legacy_mem as WB, which would
+	be safe in terms of attribute aliasing, but X has no way of
+	knowing that it is accessing regular memory, not a frame buffer,
+	so the kernel should fail the mmap rather than doing it with WB.
+
+    read/write of /dev/mem
+
+	This uses copy_from_user(), which implicitly uses a kernel
+	identity mapping.  This is obviously safe for things in
+	kern_memmap.
+
+	There may be corner cases of things that are not in kern_memmap,
+	but could be accessed this way.  For example, registers in MMIO
+	space are not in kern_memmap, but could be accessed with a UC
+	mapping.  This would not cause attribute aliasing.  But
+	registers typically can be accessed only with four-byte or
+	eight-byte accesses, and the copy_from_user() path doesn't allow
+	any control over the access size, so this would be dangerous.
+
+    ioremap()
+
+	This returns a kernel identity mapping for use inside the
+	kernel.
+
+	If the region is in kern_memmap, we should use the attribute
+	specified there.  Otherwise, if the EFI memory map reports that
+	the entire granule supports WB, we should use that (granules
+	that are partially reserved or occupied by firmware do not appear
+	in kern_memmap).  Otherwise, we should use a UC mapping.
+
+PAST PROBLEM CASES
+
+    mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+
+      The EFI memory map may not report these MMIO regions.
+
+      These must be allowed so that X will work.  This means that
+      when the EFI memory map is incomplete, every /dev/mem mmap must
+      succeed.  It may create either WB or UC user mappings, depending
+      on whether the region is in kern_memmap or the EFI memory map.
+
+    mmap of 0x0-0xA0000 /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+
+      See https://bugzilla.novell.com/show_bug.cgi?id=140858.
+
+      The EFI memory map reports the following attributes:
+        0x00000-0x9FFFF WB only
+        0xA0000-0xBFFFF UC only (VGA frame buffer)
+        0xC0000-0xFFFFF WB only
+
+      This mmap is done with user pages, not kernel identity mappings,
+      so it is safe to use WB mappings.
+
+      The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000,
+      which will use a granule-sized UC mapping covering 0-0xFFFFF.  This
+      granule covers some WB-only memory, but since UC is non-speculative,
+      the processor will never generate an uncacheable reference to the
+      WB-only areas unless the driver explicitly touches them.
+
+    mmap of 0x0-0xFFFFF legacy_mem by "X"
+
+      If the EFI memory map reports this entire range as WB, there
+      is no VGA MMIO hole, and the mmap should fail or be done with
+      a WB mapping.
+
+      There's no easy way for X to determine whether the 0xA0000-0xBFFFF
+      region is a frame buffer or just memory, so I think it's best to
+      just fail this mmap request rather than using a WB mapping.  As
+      far as I know, there's no need to map legacy_mem with WB
+      mappings.
+
+      Otherwise, a UC mapping of the entire region is probably safe.
+      The VGA hole means the region will not be in kern_memmap.  The
+      HP sx1000 chipset doesn't support UC access to the memory surrounding
+      the VGA hole, but X doesn't need that area anyway and should not
+      reference it.
+
+    mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+
+      The EFI memory map reports the following attributes:
+        0x00000-0xFFFFF WB only (no VGA MMIO hole)
+
+      This is a special case of the previous case, and the mmap should
+      fail for the same reason as above.
+
+NOTES
+
+    [1] SDM rev 2.2, vol 2, sec 4.4.1.
+    [2] SDM rev 2.2, vol 2, sec 4.4.6.
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 171a44ebd939..1543802ef53e 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -85,7 +85,9 @@ Code	Seq#	Include File		Comments
 					<mailto:maassen@uni-freiburg.de>
 'C'	all	linux/soundcard.h
 'D'	all	asm-s390/dasd.h
+'E'	all	linux/input.h
 'F'	all	linux/fb.h
+'H'	all	linux/hiddev.h
 'I'	all	linux/isdn.h
 'J'	00-1F	drivers/scsi/gdth_ioctl.h
 'K'	all	linux/kd.h
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 85a64defd385..fa0d4cca964a 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -124,7 +124,8 @@ GigaSet 307x Device Driver
 
      You can use some configuration tool of your distribution to configure this
      "modem" or configure pppd/wvdial manually. There are some example ppp
-     configuration files and chat scripts in the gigaset-VERSION/ppp directory.
+     configuration files and chat scripts in the gigaset-VERSION/ppp directory
+     in the driver packages from http://sourceforge.net/projects/gigaset307x/.
      Please note that the USB drivers are not able to change the state of the
      control lines (the M105 driver can be configured to use some undocumented
      control requests, if you really need the control lines, though). This means
@@ -164,8 +165,8 @@ GigaSet 307x Device Driver
 
      If you want both of these at once, you are out of luck.
 
-     You can also use /sys/module/<name>/parameters/cidmode for changing
-     the CID mode setting (<name> is usb_gigaset or bas_gigaset).
+     You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
+     setting (ttyGxy is ttyGU0 or ttyGB0).
 
 
 3.   Troubleshooting
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a9d3a1794b23..bca6f389da66 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,6 +147,9 @@ running once the system is up.
 	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
 			Format: <irq>,<irq>...
 
+	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
+			Format: To spoof as Windows 98: ="Microsoft Windows"
+
 	acpi_osi=	[HW,ACPI] empty param disables _OSI
 
 	acpi_serialize	[HW,ACPI] force serialization of AML methods
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index aaa01b0e3ee9..3bbe157b45e4 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -19,6 +19,7 @@ This document has the following sections:
 	- Key overview
 	- Key service overview
 	- Key access permissions
+	- SELinux support
 	- New procfs files
 	- Userspace system call interface
 	- Kernel services
@@ -232,6 +233,34 @@ For changing the ownership, group ID or permissions mask, being the owner of
 the key or having the sysadmin capability is sufficient.
 
 
+===============
+SELINUX SUPPORT
+===============
+
+The security class "key" has been added to SELinux so that mandatory access
+controls can be applied to keys created within various contexts.  This support
+is preliminary, and is likely to change quite significantly in the near future.
+Currently, all of the basic permissions explained above are provided in SELinux
+as well; SE Linux is simply invoked after all basic permission checks have been
+performed.
+
+Each key is labeled with the same context as the task to which it belongs.
+Typically, this is the same task that was running when the key was created.
+The default keyrings are handled differently, but in a way that is very
+intuitive:
+
+ (*) The user and user session keyrings that are created when the user logs in
+     are currently labeled with the context of the login manager.
+
+ (*) The keyrings associated with new threads are each labeled with the context
+     of their associated thread, and both session and process keyrings are
+     handled similarly.
+
+Note, however, that the default keyrings associated with the root user are
+labeled with the default kernel context, since they are created early in the
+boot process, before root has a chance to log in.
+
+
 ================
 NEW PROCFS FILES
 ================
@@ -935,6 +964,16 @@ The structure has a number of fields, some of which are mandatory:
      It is not safe to sleep in this method; the caller may hold spinlocks.
 
 
+ (*) void (*revoke)(struct key *key);
+
+     This method is optional.  It is called to discard part of the payload
+     data upon a key being revoked.  The caller will have the key semaphore
+     write-locked.
+
+     It is safe to sleep in this method, though care should be taken to avoid
+     a deadlock against the key semaphore.
+
+
  (*) void (*destroy)(struct key *key);
 
      This method is optional. It is called to discard the payload data on a key
diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
index 76750fb9151a..839cbb71388b 100644
--- a/Documentation/networking/tuntap.txt
+++ b/Documentation/networking/tuntap.txt
@@ -39,10 +39,13 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
      mknod /dev/net/tun c 10 200
   
   Set permissions:
-     e.g. chmod 0700 /dev/net/tun
-     if you want the device only accessible by root. Giving regular users the
-     right to assign network devices is NOT a good idea. Users could assign
-     bogus network interfaces to trick firewalls or administrators.
+     e.g. chmod 0666 /dev/net/tun
+     There's no harm in allowing the device to be accessible by non-root users,
+     since CAP_NET_ADMIN is required for creating network devices or for 
+     connecting to network devices which aren't owned by the user in question.
+     If you want to create persistent devices and give ownership of them to 
+     unprivileged users, then you need the /dev/net/tun device to be usable by
+     those users.
 
   Driver module autoloading
 
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 66bbbf1d1ef6..3242e5c1ee9c 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -213,9 +213,17 @@ have been remapped by the kernel.
 
    See Documentation/IO-mapping.txt for how to access device memory.
 
-   You still need to call request_region() for I/O regions and
-request_mem_region() for memory regions to make sure nobody else is using the
-same device.
+   The device driver needs to call pci_request_region() to make sure
+no other device is already using the same resource. The driver is expected
+to determine MMIO and IO Port resource availability _before_ calling
+pci_enable_device().  Conversely, drivers should call pci_release_region()
+_after_ calling pci_disable_device(). The idea is to prevent two devices
+colliding on the same address range.
+
+Generic flavors of pci_request_region() are request_mem_region()
+(for MMIO ranges) and request_region() (for IO Port ranges).
+Use these for address resources that are not described by "normal" PCI
+interfaces (e.g. BAR).
 
    All interrupt handlers should be registered with SA_SHIRQ and use the devid
 to map IRQs to devices (remember that all PCI interrupts are shared).
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index f987afe43e28..fba1e05c47c7 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -135,96 +135,6 @@ HW.
 
 FREEZE -- stop DMA and interrupts, and be prepared to reinit HW from
 scratch. That probably means stop accepting upstream requests, the
-actual policy of what to do with them beeing specific to a given
-driver. It's acceptable for a network driver to just drop packets
-while a block driver is expected to block the queue so no request is
-lost. (Use IDE as an example on how to do that). FREEZE requires no
-power state change, and it's expected for drivers to be able to
-quickly transition back to operating state.
-
-SUSPEND -- like FREEZE, but also put hardware into low-power state. If
-there's need to distinguish several levels of sleep, additional flag
-is probably best way to do that.
-
-Transitions are only from a resumed state to a suspended state, never
-between 2 suspended states. (ON -> FREEZE or ON -> SUSPEND can happen,
-FREEZE -> SUSPEND or SUSPEND -> FREEZE can not).
-
-All events are:
-
-[NOTE NOTE NOTE: If you are driver author, you should not care; you
-should only look at event, and ignore flags.]
-
-#Prepare for suspend -- userland is still running but we are going to
-#enter suspend state. This gives drivers chance to load firmware from
-#disk and store it in memory, or do other activities taht require
-#operating userland, ability to kmalloc GFP_KERNEL, etc... All of these
-#are forbiden once the suspend dance is started.. event = ON, flags =
-#PREPARE_TO_SUSPEND
-
-Apm standby -- prepare for APM event. Quiesce devices to make life
-easier for APM BIOS. event = FREEZE, flags = APM_STANDBY
-
-Apm suspend -- same as APM_STANDBY, but it we should probably avoid
-spinning down disks. event = FREEZE, flags = APM_SUSPEND
-
-System halt, reboot -- quiesce devices to make life easier for BIOS. event
-= FREEZE, flags = SYSTEM_HALT or SYSTEM_REBOOT
-
-System shutdown -- at least disks need to be spun down, or data may be
-lost. Quiesce devices, just to make life easier for BIOS. event =
-FREEZE, flags = SYSTEM_SHUTDOWN
-
-Kexec    -- turn off DMAs and put hardware into some state where new
-kernel can take over. event = FREEZE, flags = KEXEC
-
-Powerdown at end of swsusp -- very similar to SYSTEM_SHUTDOWN, except wake
-may need to be enabled on some devices. This actually has at least 3
-subtypes, system can reboot, enter S4 and enter S5 at the end of
-swsusp. event = FREEZE, flags = SWSUSP and one of SYSTEM_REBOOT,
-SYSTEM_SHUTDOWN, SYSTEM_S4
-
-Suspend to ram  -- put devices into low power state. event = SUSPEND,
-flags = SUSPEND_TO_RAM
-
-Freeze for swsusp snapshot -- stop DMA and interrupts. No need to put
-devices into low power mode, but you must be able to reinitialize
-device from scratch in resume method. This has two flavors, its done
-once on suspending kernel, once on resuming kernel. event = FREEZE,
-flags = DURING_SUSPEND or DURING_RESUME
-
-Device detach requested from /sys -- deinitialize device; proably same as
-SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
-= FREEZE, flags = DEV_DETACH.
-
-#These are not really events sent:
-#
-#System fully on -- device is working normally; this is probably never
-#passed to suspend() method... event = ON, flags = 0
-#
-#Ready after resume -- userland is now running, again. Time to free any
-#memory you ate during prepare to suspend... event = ON, flags =
-#READY_AFTER_RESUME
-#
-
-
-pm_message_t meaning
-
-pm_message_t has two fields. event ("major"), and flags.  If driver
-does not know event code, it aborts the request, returning error. Some
-drivers may need to deal with special cases based on the actual type
-of suspend operation being done at the system level. This is why
-there are flags.
-
-Event codes are:
-
-ON -- no need to do anything except special cases like broken
-HW.
-
-# NOTIFICATION -- pretty much same as ON?
-
-FREEZE -- stop DMA and interrupts, and be prepared to reinit HW from
-scratch. That probably means stop accepting upstream requests, the
 actual policy of what to do with them being specific to a given
 driver. It's acceptable for a network driver to just drop packets
 while a block driver is expected to block the queue so no request is
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index d7814a113ee1..823b2cf6e3dc 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -18,10 +18,11 @@ Some warnings, first.
  *
  * (*) suspend/resume support is needed to make it safe.
  *
- * If you have any filesystems on USB devices mounted before suspend,
+ * If you have any filesystems on USB devices mounted before software suspend,
  * they won't be accessible after resume and you may lose data, as though
- * you have unplugged the USB devices with mounted filesystems on them
- * (see the FAQ below for details).
+ * you have unplugged the USB devices with mounted filesystems on them;
+ * see the FAQ below for details.  (This is not true for more traditional
+ * power states like "standby", which normally don't turn USB off.)
 
 You need to append resume=/dev/your_swap_partition to kernel command
 line. Then you suspend by
@@ -204,7 +205,7 @@ Q: There don't seem to be any generally useful behavioral
 distinctions between SUSPEND and FREEZE.
 
 A: Doing SUSPEND when you are asked to do FREEZE is always correct,
-but it may be unneccessarily slow. If you want USB to stay simple,
+but it may be unneccessarily slow. If you want your driver to stay simple,
 slowness may not matter to you. It can always be fixed later.
 
 For devices like disk it does matter, you do not want to spindown for
@@ -349,25 +350,72 @@ Q: How do I make suspend more verbose?
 
 A: If you want to see any non-error kernel messages on the virtual
 terminal the kernel switches to during suspend, you have to set the
-kernel console loglevel to at least 5, for example by doing
-
-	echo 5 > /proc/sys/kernel/printk
+kernel console loglevel to at least 4 (KERN_WARNING), for example by
+doing
+
+	# save the old loglevel
+	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
+	# set the loglevel so we see the progress bar.
+	# if the level is higher than needed, we leave it alone.
+	if [ $LOGLEVEL -lt 5 ]; then
+	        echo 5 > /proc/sys/kernel/printk
+		fi
+
+        IMG_SZ=0
+        read IMG_SZ < /sys/power/image_size
+        echo -n disk > /sys/power/state
+        RET=$?
+        #
+        # the logic here is:
+        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
+        # then try again with image_size set to zero.
+	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
+                echo 0 > /sys/power/image_size
+                echo -n disk > /sys/power/state
+                RET=$?
+        fi
+
+	# restore previous loglevel
+	echo $LOGLEVEL > /proc/sys/kernel/printk
+	exit $RET
 
 Q: Is this true that if I have a mounted filesystem on a USB device and
 I suspend to disk, I can lose data unless the filesystem has been mounted
 with "sync"?
 
-A: That's right.  It depends on your hardware, and it could be true even for
-suspend-to-RAM.  In fact, even with "-o sync" you can lose data if your
-programs have information in buffers they haven't written out to disk.
+A: That's right ... if you disconnect that device, you may lose data.
+In fact, even with "-o sync" you can lose data if your programs have
+information in buffers they haven't written out to a disk you disconnect,
+or if you disconnect before the device finished saving data you wrote.
 
-If you're lucky, your hardware will support low-power modes for USB
-controllers while the system is asleep.  Lots of hardware doesn't,
-however.  Shutting off the power to a USB controller is equivalent to
-unplugging all the attached devices.
+Software suspend normally powers down USB controllers, which is equivalent
+to disconnecting all USB devices attached to your system.
 
-Remember that it's always a bad idea to unplug a disk drive containing a
-mounted filesystem.  With USB that's true even when your system is asleep!
-The safest thing is to unmount all USB-based filesystems before suspending
-and remount them after resuming.
+Your system might well support low-power modes for its USB controllers
+while the system is asleep, maintaining the connection, using true sleep
+modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
+/sys/power/state file; write "standby" or "mem".)  We've not seen any
+hardware that can use these modes through software suspend, although in
+theory some systems might support "platform" or "firmware" modes that
+won't break the USB connections.
 
+Remember that it's always a bad idea to unplug a disk drive containing a
+mounted filesystem.  That's true even when your system is asleep!  The
+safest thing is to unmount all filesystems on removable media (such USB,
+Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
+before suspending; then remount them after resuming.
+
+Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
+compiled with the similar configuration files. Anyway I found that
+suspend to disk (and resume) is much slower on 2.6.16 compared to
+2.6.15. Any idea for why that might happen or how can I speed it up?
+
+A: This is because the size of the suspend image is now greater than
+for 2.6.15 (by saving more data we can get more responsive system
+after resume).
+
+There's the /sys/power/image_size knob that controls the size of the
+image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
+root), the 2.6.15 behavior should be restored.  If it is still too
+slow, take a look at suspend.sf.net -- userland suspend is faster and
+supports LZF compression to speed it up further.
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index 43a889f8f08d..d859faa3a463 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -90,6 +90,7 @@ Table of known working notebooks:
 Model                           hack (or "how to do it")
 ------------------------------------------------------------------------------
 Acer Aspire 1406LC		ole's late BIOS init (7), turn off DRI
+Acer TM 230			s3_bios (2)
 Acer TM 242FX			vbetool (6)
 Acer TM C110			video_post (8)
 Acer TM C300                    vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
@@ -115,6 +116,7 @@ Dell D610			vga=normal and X (possibly vbestate (6) too, but not tested)
 Dell Inspiron 4000		??? (*)
 Dell Inspiron 500m		??? (*)
 Dell Inspiron 510m		???
+Dell Inspiron 5150		vbetool needed (6)
 Dell Inspiron 600m		??? (*)
 Dell Inspiron 8200		??? (*)
 Dell Inspiron 8500		??? (*)
@@ -125,6 +127,7 @@ HP NX7000			??? (*)
 HP Pavilion ZD7000		vbetool post needed, need open-source nv driver for X
 HP Omnibook XE3	athlon version	none (1)
 HP Omnibook XE3GC		none (1), video is S3 Savage/IX-MV
+HP Omnibook XE3L-GF		vbetool (6)
 HP Omnibook 5150		none (1), (S1 also works OK)
 IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
 IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
@@ -157,6 +160,7 @@ Sony Vaio vgn-s260		X or boot-radeon can init it (5)
 Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will be blank unless you return to X.
 Sony Vaio vgn-FS115B		s3_bios (2),s3_mode (4)
 Toshiba Libretto L5		none (1)
+Toshiba Libretto 100CT/110CT    vbetool (6)
 Toshiba Portege 3020CT		s3_mode (3)
 Toshiba Satellite 4030CDT	s3_mode (3) (S1 also works OK)
 Toshiba Satellite 4080XCDT      s3_mode (3) (S1 also works OK)
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index e7da8c3a255b..12354830c6b0 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -30,8 +30,6 @@ aic7xxx.txt
 	- info on driver for Adaptec controllers
 aic7xxx_old.txt
 	- info on driver for Adaptec controllers, old generation
-cpqfc.txt
-	- info on driver for Compaq Tachyon TS adapters
 dpti.txt
 	- info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters
 dtc3x80.txt
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 2dafa63bd370..0a85a7e8120e 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,16 @@
+
+1 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version   : 00.00.02.04 
+
+i.	Remove superflous instance_lock
+
+	gets rid of the otherwise superflous instance_lock and avoids an unsave 
+	unsynchronized access in the error handler.
+
+		- Christoph Hellwig <hch@lst.de>
+
+
 1 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
 2 Current Version : 00.00.02.04
 3 Older Version   : 00.00.02.04 
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index 820fd0793502..be55670851a4 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -24,10 +24,10 @@ Supported Cards/Chipsets
 	9005:0285:9005:0296	Adaptec	2240S (SabreExpress)
 	9005:0285:9005:0290	Adaptec	2410SA (Jaguar)
 	9005:0285:9005:0293	Adaptec 21610SA (Corsair-16)
-	9005:0285:103c:3227	Adaptec 2610SA (Bearcat)
+	9005:0285:103c:3227	Adaptec 2610SA (Bearcat HP release)
 	9005:0285:9005:0292	Adaptec	2810SA (Corsair-8)
 	9005:0285:9005:0294	Adaptec	Prowler
-	9005:0286:9005:029d	Adaptec	2420SA (Intruder)
+	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
 	9005:0286:9005:029c	Adaptec	2620SA (Intruder)
 	9005:0286:9005:029b	Adaptec	2820SA (Intruder)
 	9005:0286:9005:02a7	Adaptec	2830SA (Skyray)
@@ -38,7 +38,7 @@ Supported Cards/Chipsets
 	9005:0285:9005:0297	Adaptec	4005SAS (AvonPark)
 	9005:0285:9005:0299	Adaptec	4800SAS (Marauder-X)
 	9005:0285:9005:029a	Adaptec	4805SAS (Marauder-E)
-	9005:0286:9005:02a2	Adaptec	4810SAS (Hurricane)
+	9005:0286:9005:02a2	Adaptec	3800SAS (Hurricane44)
 	1011:0046:9005:0364	Adaptec	5400S (Mustang)
 	1011:0046:9005:0365	Adaptec	5400S (Mustang)
 	9005:0283:9005:0283	Adaptec	Catapult (3210S with arc firmware)
@@ -72,7 +72,7 @@ Supported Cards/Chipsets
 	9005:0286:9005:02a1	ICP	ICP9087MA (Lancer)
 	9005:0286:9005:02a4	ICP	ICP9085LI (Marauder-X)
 	9005:0286:9005:02a5	ICP	ICP5085BR (Marauder-E)
-	9005:0286:9005:02a3	ICP	ICP5085AU (Hurricane)
+	9005:0286:9005:02a3	ICP	ICP5445AU (Hurricane44)
 	9005:0286:9005:02a6	ICP	ICP9067MA (Intruder-6)
 	9005:0286:9005:02a9	ICP	ICP5087AU (Skyray)
 	9005:0286:9005:02aa	ICP	ICP5047AU (Skyray)
diff --git a/Documentation/scsi/cpqfc.txt b/Documentation/scsi/cpqfc.txt
deleted file mode 100644
index dd33e61c0645..000000000000
--- a/Documentation/scsi/cpqfc.txt
+++ /dev/null
@@ -1,272 +0,0 @@
-Notes for CPQFCTS driver for Compaq Tachyon TS
-Fibre Channel Host Bus Adapter, PCI 64-bit, 66MHz
-for Linux (RH 6.1, 6.2 kernel 2.2.12-32, 2.2.14-5)
-SMP tested
-Tested in single and dual HBA configuration, 32 and 64bit busses,
-33 and 66MHz.  Only supports FC-AL.
-SEST size 512 Exchanges (simultaneous I/Os) limited by module kmalloc() 
-	max of 128k bytes contiguous.
-
-Ver 2.5.4  Oct 03, 2002
-   * fixed memcpy of sense buffer in ioctl to copy the smaller defined size
-Ver 2.5.3  Aug 01, 2002
-   * fix the passthru ioctl to handle the Scsi_Cmnd->request being a pointer
-Ver 2.5.1  Jul 30, 2002
-   * fix ioctl to pay attention to the specified LUN.
-Ver 2.5.0  Nov 29, 2001
-   * eliminated io_request_lock.  This change makes the driver specific
-     to the 2.5.x kernels.
-   * silenced excessively noisy printks.
-
-Ver 2.1.2  July 23, 2002
-   * initialize DumCmnd->lun in cpqfcTS_ioctl (used in fcFindLoggedInPorts as LUN index)
-
-Ver 2.1.1  Oct 18, 2001
-   * reinitialize Cmnd->SCp.sent_command (used to identify commands as
-     passthrus) on calling scsi_done, since the scsi mid layer does not
-     use (or reinitialize) this field to prevent subsequent comands from
-     having it set incorrectly. 
-
-Ver 2.1.0  Aug 27, 2001
-   * Revise driver to use new kernel 2.4.x PCI DMA API, instead of 
-     virt_to_bus().  (enables driver to work w/ ia64 systems with >2Gb RAM.)
-     Rework main scatter-gather code to handle cases where SG element
-     lengths are larger than 0x7FFFF bytes and use as many scatter 
-     gather pages as necessary. (Steve Cameron)
-   * Makefile changes to bring cpqfc into line w/ rest of SCSI drivers
-     (thanks to Keith Owens)
-
-Ver 2.0.5  Aug 06, 2001
-   * Reject non-existent luns in the driver rather than letting the 
-     hardware do it.  (some HW behaves differently than others in this area.)
-   * Changed Makefile to rely on "make dep" instead of explicit dependencies
-   * ifdef'ed out fibre channel analyzer triggering debug code
-   * fixed a jiffies wrapping issue
-
-Ver 2.0.4  Aug 01, 2001
-   * Incorporated fix for target device reset from Steeleye
-   * Fixed passthrough ioctl so it doesn't hang.
-   * Fixed hang in launch_FCworker_thread() that occurred on some machines.
-   * Avoid problem when number of volumes in a single cabinet > 8
-
-Ver 2.0.2  July 23, 2001
-   Changed the semiphore changes so the driver would compile in 2.4.7. 
-   This version is for 2.4.7 and beyond. 
- 
-Ver 2.0.1  May 	7, 2001
-   Merged version 1.3.6 fixes into version 2.0.0.   
-
-Ver 2.0.0  May   7, 2001
-  Fixed problem so spinlock is being initialized to UNLOCKED. 
-  Fixed updated driver so it compiles in the 2.4 tree. 
- 
- Ver 1.3.6  Feb  27, 2001
-   Added Target_Device_Reset function for SCSI error handling
-   Fixed problem with not reseting addressing mode after implicit logout
- 
-
-Ver 1.3.4  Sep   7, 2000
-  Added Modinfo information
-  Fixed problem with statically linking the driver
-
-Ver 1.3.3, Aug  23, 2000
-  Fixed device/function number in ioctl
-
-Ver 1.3.2, July 27, 2000
-  Add include for Alpha compile on 2.2.14 kernel (cpq*i2c.c)
-  Change logic for different FCP-RSP sense_buffer location for HSG80 target
-  And search for Agilent Tachyon XL2 HBAs (not finished! - in test)
-
-Tested with 
-(storage):
-           Compaq RA-4x000, RAID firmware ver 2.40 - 2.54
-           Seagate FC drives model ST39102FC, rev 0006
-           Hitachi DK31CJ-72FC rev J8A8
-           IBM DDYF-T18350R rev F60K
-           Compaq FC-SCSI bridge w/ DLT 35/70 Gb DLT (tape)
-(servers):
-           Compaq PL-1850R
-           Compaq PL-6500 Xeon (400MHz)
-	   Compaq PL-8500 (500MHz, 66MHz, 64bit PCI)
-           Compaq Alpha DS20 (RH 6.1)
-(hubs):
-           Vixel Rapport 1000 (7-port "dumb")
-	   Gadzoox Gibralter (12-port "dumb")
-	   Gadzoox Capellix 2000, 3000 
-(switches):
-           Brocade 2010, 2400, 2800, rev 2.0.3a (& later)
-           Gadzoox 3210 (Fabric blade beta)
-           Vixel 7100 (Fabric beta firmare - known hot plug issues)
-using "qa_test" (esp. io_test script) suite modified from Unix tests.
-	
-Installation:
-make menuconfig
-  (select SCSI low-level, Compaq FC HBA)
-make modules
-make modules_install
-
-e.g. insmod -f cpqfc
-
-Due to Fabric/switch delays, driver requires 4 seconds 
-to initialize.  If adapters are found, there will be a entries at
-/proc/scsi/cpqfcTS/*
-
-sample contents of startup messages
-
-*************************
- scsi_register allocating 3596 bytes for CPQFCHBA
- ioremap'd Membase: c887e600
-  HBA Tachyon RevId 1.2
-Allocating 119808 for 576 Exchanges @ c0dc0000
-Allocating 112904 for LinkQ @ c0c20000 (576 elements)
-Allocating 110600 for TachSEST for 512 Exchanges
-  cpqfcTS: writing IMQ BASE 7C0000h    PI 7C4000h
-  cpqfcTS: SEST c0e40000(virt): Wrote base E40000h @ c887e740
-cpqfcTS: New FC port 0000E8h WWN: 500507650642499D SCSI Chan/Trgt 0/0
-cpqfcTS: New FC port 0000EFh WWN: 50000E100000D5A6 SCSI Chan/Trgt 0/1
-cpqfcTS: New FC port 0000E4h WWN: 21000020370097BB SCSI Chan/Trgt 0/2
-cpqfcTS: New FC port 0000E2h WWN: 2100002037009946 SCSI Chan/Trgt 0/3
-cpqfcTS: New FC port 0000E1h WWN: 21000020370098FE SCSI Chan/Trgt 0/4
-cpqfcTS: New FC port 0000E0h WWN: 21000020370097B2 SCSI Chan/Trgt 0/5
-cpqfcTS: New FC port 0000DCh WWN: 2100002037006CC1 SCSI Chan/Trgt 0/6
-cpqfcTS: New FC port 0000DAh WWN: 21000020370059F6 SCSI Chan/Trgt 0/7
-cpqfcTS: New FC port 00000Fh WWN: 500805F1FADB0E20 SCSI Chan/Trgt 0/8
-cpqfcTS: New FC port 000008h WWN: 500805F1FADB0EBA SCSI Chan/Trgt 0/9
-cpqfcTS: New FC port 000004h WWN: 500805F1FADB1EB9 SCSI Chan/Trgt 0/10
-cpqfcTS: New FC port 000002h WWN: 500805F1FADB1ADE SCSI Chan/Trgt 0/11
-cpqfcTS: New FC port 000001h WWN: 500805F1FADBA2CA SCSI Chan/Trgt 0/12
-scsi4 : Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2: WWN 500508B200193F50
- on PCI bus 0 device 0xa0fc irq 5 IObaseL 0x3400, MEMBASE 0xc6ef8600
-PCI bus width 32 bits, bus speed 33 MHz
-FCP-SCSI Driver v1.3.0
-GBIC detected: Short-wave.  LPSM 0h Monitor
-scsi : 5 hosts.
-  Vendor: IBM       Model: DDYF-T18350R      Rev: F60K
-  Type:   Direct-Access                      ANSI SCSI revision: 03
-Detected scsi disk sdb at scsi4, channel 0, id 0, lun 0
-  Vendor: HITACHI   Model: DK31CJ-72FC       Rev: J8A8
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdc at scsi4, channel 0, id 1, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdd at scsi4, channel 0, id 2, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sde at scsi4, channel 0, id 3, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdf at scsi4, channel 0, id 4, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdg at scsi4, channel 0, id 5, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdh at scsi4, channel 0, id 6, lun 0
-  Vendor: SEAGATE   Model: ST39102FC         Rev: 0006
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdi at scsi4, channel 0, id 7, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.48
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdj at scsi4, channel 0, id 8, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.48
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdk at scsi4, channel 0, id 8, lun 1
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.40
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdl at scsi4, channel 0, id 9, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.40
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdm at scsi4, channel 0, id 9, lun 1
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.54
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdn at scsi4, channel 0, id 10, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.54
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdo at scsi4, channel 0, id 11, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.54
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdp at scsi4, channel 0, id 11, lun 1
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.54
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdq at scsi4, channel 0, id 12, lun 0
-  Vendor: COMPAQ    Model: LOGICAL VOLUME    Rev: 2.54
-  Type:   Direct-Access                      ANSI SCSI revision: 02
-Detected scsi disk sdr at scsi4, channel 0, id 12, lun 1
-resize_dma_pool: unknown device type 12
-resize_dma_pool: unknown device type 12
-SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
- sdb: sdb1
-SCSI device sdc: hdwr sector= 512 bytes. Sectors= 144410880 [70513 MB] [70.5 GB]
- sdc: sdc1
-SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sdd: sdd1
-SCSI device sde: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sde: sde1
-SCSI device sdf: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sdf: sdf1
-SCSI device sdg: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sdg: sdg1
-SCSI device sdh: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sdh: sdh1
-SCSI device sdi: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
- sdi: sdi1
-SCSI device sdj: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB]
- sdj: sdj1
-SCSI device sdk: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB]
- sdk: sdk1
-SCSI device sdl: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB]
- sdl: sdl1
-SCSI device sdm: hdwr sector= 512 bytes. Sectors= 8380320 [4091 MB] [4.1 GB]
- sdm: sdm1
-SCSI device sdn: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB]
- sdn: sdn1
-SCSI device sdo: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB]
- sdo: sdo1
-SCSI device sdp: hdwr sector= 512 bytes. Sectors= 17764320 [8673 MB] [8.7 GB]
- sdp: sdp1
-SCSI device sdq: hdwr sector= 512 bytes. Sectors= 2056160 [1003 MB] [1.0 GB]
- sdq: sdq1
-SCSI device sdr: hdwr sector= 512 bytes. Sectors= 2052736 [1002 MB] [1.0 GB]
- sdr: sdr1
-
-*************************
-
-If a GBIC of type Short-wave, Long-wave, or Copper is detected, it will
-print out; otherwise, "none" is displayed.  If the cabling is correct
-and a loop circuit is completed, you should see "Monitor"; otherwise, 
-"LoopFail" (on open circuit) or some LPSM number/state with bit 3 set.
-
-
-ERRATA:
-1. Normally, Linux Scsi queries FC devices with INQUIRY strings.  All LUNs
-found according to INQUIRY should get READ commands at sector 0 to find
-partition table, etc.  Older kernels only query the first 4 devices.  Some
-Linux kernels only look for one LUN per target (i.e. FC device).
-
-2. Physically removing a device, or a malfunctioning system which hides a
-device, leads to a 30-second timeout and subsequent _abort call.  
-In some process contexts, this will hang the kernel (crashing the system).
-Single bit errors in frames and virtually all hot plugging events are 
-gracefully handled with internal driver timer and Abort processing.
-
-3. Some SCSI drives with error conditions will not handle the 7 second timeout
-in this software driver, leading to infinite retries on timed out SCSI commands.
-The 7 secs balances the need to quickly recover from lost frames (esp. on sequence
-initiatives) and time needed by older/slower/error-state drives in responding.
-This can be easily changed in "Exchanges[].timeOut".
-
-4. Due to the nature of FC soft addressing, there is no assurance that the 
-same LUNs (drives) will have the same path (e.g. /dev/sdb1) from one boot to
-next.  Dynamic soft address changes (i.e. 24-bit FC port_id) are
-supported during run time (e.g. due to hot plug event) by the use of WWN to
-SCSI Nexus (channel/target/LUN) mapping.
-
-5. Compaq RA4x00 firmware version 2.54 and later supports SSP (Selective 
-Storage Presentation), which maps LUNs to a WWN.  If RA4x00 firmware prior
-2.54 (e.g. older controller) is used, or the FC HBA is replaced (another WWN
-is used), logical volumes on the RA4x00 will no longer be visible.
-
-
-Send questions/comments to:
-Amy Vanzant-Hodge (fibrechannel@compaq.com)
-
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
new file mode 100644
index 000000000000..d28a31247d4c
--- /dev/null
+++ b/Documentation/scsi/hptiop.txt
@@ -0,0 +1,92 @@
+HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop)
+
+Controller Register Map
+-------------------------
+
+The controller IOP is accessed via PCI BAR0.
+
+     BAR0 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
+
+I/O Request Workflow
+----------------------
+
+All queued requests are handled via inbound/outbound queue port.
+A request packet can be allocated in either IOP or host memory.
+
+To send a request to the controller:
+
+    - Get a free request packet by reading the inbound queue port or
+      allocate a free request in host DMA coherent memory.
+
+      The value returned from the inbound queue port is an offset
+      relative to the IOP BAR0.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the packet.
+
+    - Post the packet to IOP by writing it to inbound queue. For requests
+      allocated in IOP memory, write the offset to inbound queue port. For
+      requests allocated in host memory, write (0x80000000|(bus_addr>>5))
+      to the inbound queue port.
+
+    - The IOP process the request. When the request is completed, it
+      will be put into outbound queue. An outbound interrupt will be
+      generated.
+
+      For requests allocated in IOP memory, the request offset is posted to
+      outbound queue.
+
+      For requests allocated in host memory, (0x80000000|(bus_addr>>5))
+      is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
+      flag is set in the request, the low 32-bit context value will be
+      posted instead.
+
+    - The host read the outbound queue and complete the request.
+
+      For requests allocated in IOP memory, the host driver free the request
+      by writing it to the outbound queue.
+
+Non-queued requests (reset/flush etc) can be sent via inbound message
+register 0. An outbound message with the same value indicates the completion
+of an inbound message.
+
+
+User-level Interface
+---------------------
+
+The driver exposes following sysfs attributes:
+
+     NAME                 R/W    Description
+     driver-version        R     driver version string
+     firmware-version      R     firmware version string
+
+The driver registers char device "hptiop" to communicate with HighPoint RAID
+management software. Its ioctl routine acts as a general binary interface 
+between the IOP firmware and HighPoint RAID management software. New management
+functions can be implemented in application/firmware without modification
+in driver code.
+
+
+-----------------------------------------------------------------------------
+Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
+
+  This file is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  linux@highpoint-tech.com
+  http://www.highpoint-tech.com
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 0ee2c7dfc482..87d76a5c73d0 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -366,7 +366,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for C-Media CMI8338 and 8738 PCI sound cards.
 
-    mpu_port	- 0x300,0x310,0x320,0x330, 0 = disable (default)
+    mpu_port	- 0x300,0x310,0x320,0x330 = legacy port,
+		  1 = integrated PCI port,
+		  0 = disable (default)
     fm_port     - 0x388 (default), 0 = disable (default)
     soft_ac3    - Software-conversion of raw SPDIF packets (model 033 only)
                   (default = 1)
@@ -468,7 +470,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for multifunction CS5535 companion PCI device
 
-    This module supports multiple cards.
+    The power-management is supported.
 
   Module snd-dt019x
   -----------------
@@ -707,8 +709,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-hda-intel
   --------------------
 
-    Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450,
-	       VIA VT8251/VT8237A
+    Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
+		ATI SB450, SB600, RS600,
+		VIA VT8251/VT8237A,
+		SIS966, ULI M5461
 
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
@@ -778,6 +782,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	AD1981
 	  basic		3-jack (default)
 	  hp		HP nx6320
+	  thinkpad	Lenovo Thinkpad T60/X60/Z60
 
 	AD1986A
 	  6stack	6-jack, separate surrounds (default)
@@ -1633,9 +1638,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     About capture IBL, see the description of snd-vx222 module.
 
-    Note: the driver is build only when CONFIG_ISA is set.
-    
-    Note2: snd-vxp440 driver is merged to snd-vxpocket driver since
+    Note: snd-vxp440 driver is merged to snd-vxpocket driver since
            ALSA 1.0.10.
 
     The power-management is supported.
@@ -1662,8 +1665,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for Sound Core PDAudioCF sound card.
 
-    Note: the driver is build only when CONFIG_ISA is set.
-
     The power-management is supported.
 
 
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 1faf76383bab..635cbb94357c 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -4215,7 +4215,7 @@ struct _snd_pcm_runtime {
           <programlisting>
 <![CDATA[
   struct snd_rawmidi *rmidi;
-  snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, integrated,
+  snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
                       irq, irq_flags, &rmidi);
 ]]>
           </programlisting>
@@ -4242,15 +4242,36 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
+	The 5th argument is bitflags for additional information.
         When the i/o port address above is a part of the PCI i/o
       region, the MPU401 i/o port might have been already allocated
-      (reserved) by the driver itself. In such a case, pass non-zero
-      to the 5th argument
-      (<parameter>integrated</parameter>). Otherwise, pass 0 to it,
+      (reserved) by the driver itself. In such a case, pass a bit flag
+      <constant>MPU401_INFO_INTEGRATED</constant>,
       and 
       the mpu401-uart layer will allocate the i/o ports by itself. 
       </para>
 
+	<para>
+	When the controller supports only the input or output MIDI stream,
+	pass <constant>MPU401_INFO_INPUT</constant> or
+	<constant>MPU401_INFO_OUTPUT</constant> bitflag, respectively.
+	Then the rawmidi instance is created as a single stream.
+	</para>
+
+	<para>
+	<constant>MPU401_INFO_MMIO</constant> bitflag is used to change
+	the access method to MMIO (via readb and writeb) instead of
+	iob and outb.  In this case, you have to pass the iomapped address
+	to <function>snd_mpu401_uart_new()</function>.
+	</para>
+
+	<para>
+	When <constant>MPU401_INFO_TX_IRQ</constant> is set, the output
+	stream isn't checked in the default interrupt handler.  The driver
+	needs to call <function>snd_mpu401_uart_interrupt_tx()</function>
+	by itself to start processing the output stream in irq handler.
+	</para>
+
       <para>
         Usually, the port address corresponds to the command port and
         port + 1 corresponds to the data port. If not, you may change
@@ -5333,7 +5354,7 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  snd_info_set_text_ops(entry, chip, read_size, my_proc_read);
+  snd_info_set_text_ops(entry, chip, my_proc_read);
 ]]>
         </programlisting>
       </informalexample>
@@ -5394,7 +5415,6 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  entry->c.text.write_size = 256;
   entry->c.text.write = my_proc_write;
 ]]>
         </programlisting>
@@ -5402,22 +5422,6 @@ struct _snd_pcm_runtime {
     </para>
 
     <para>
-    The buffer size for read is set to 1024 implicitly by
-    <function>snd_info_set_text_ops()</function>.  It should suffice
-    in most cases (the size will be aligned to
-    <constant>PAGE_SIZE</constant> anyway), but if you need to handle
-    very large text files, you can set it explicitly, too.
-
-      <informalexample>
-        <programlisting>
-<![CDATA[
-  entry->c.text.read_size = 65536;
-]]>
-        </programlisting>
-      </informalexample>
-    </para>
-
-    <para>
       For the write callback, you can use
     <function>snd_info_get_line()</function> to get a text line, and
     <function>snd_info_get_str()</function> to retrieve a string from
@@ -5562,7 +5566,7 @@ struct _snd_pcm_runtime {
 	  power status.</para></listitem>
         <listitem><para>Call <function>snd_pcm_suspend_all()</function> to suspend the running PCM streams.</para></listitem>
 	<listitem><para>If AC97 codecs are used, call
-	<function>snd_ac97_resume()</function> for each codec.</para></listitem>
+	<function>snd_ac97_suspend()</function> for each codec.</para></listitem>
         <listitem><para>Save the register values if necessary.</para></listitem>
         <listitem><para>Stop the hardware if necessary.</para></listitem>
         <listitem><para>Disable the PCI device by calling
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 3f1c5464b1c9..5a311c38dd1a 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -1,5 +1,6 @@
 Copyright 2004 Linus Torvalds
 Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2006 Bob Copeland <me@bobcopeland.com>
 
 Using sparse for typechecking
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -41,15 +42,8 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian
 vs cpu-endian vs whatever), and there the constant "0" really _is_
 special.
 
-Use
-
-	make C=[12] CF=-Wbitwise
-
-or you don't get any checking at all.
-
-
-Where to get sparse
-~~~~~~~~~~~~~~~~~~~
+Getting sparse
+~~~~~~~~~~~~~~
 
 With git, you can just get it from
 
@@ -57,7 +51,7 @@ With git, you can just get it from
 
 and DaveJ has tar-balls at
 
-	http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
+        http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
 
 
 Once you have it, just do
@@ -65,8 +59,20 @@ Once you have it, just do
         make
         make install
 
-as your regular user, and it will install sparse in your ~/bin directory.
-After that, doing a kernel make with "make C=1" will run sparse on all the
-C files that get recompiled, or with "make C=2" will run sparse on the
-files whether they need to be recompiled or not (ie the latter is fast way
-to check the whole tree if you have already built it).
+as a regular user, and it will install sparse in your ~/bin directory.
+
+Using sparse
+~~~~~~~~~~~~
+
+Do a kernel make with "make C=1" to run sparse on all the C files that get
+recompiled, or use "make C=2" to run sparse on the files whether they need to
+be recompiled or not.  The latter is a fast way to check the whole tree if you
+have already built it.
+
+The optional make variable CF can be used to pass arguments to sparse.  The
+build system passes -Wbitwise to sparse automatically.  To perform endianness
+checks, you may define __CHECK_ENDIAN__:
+
+        make C=2 CF="-D__CHECK_ENDIAN__"
+
+These checks are disabled by default as they generate a host of warnings.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index a46c10fcddfc..2dc246af4885 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -29,6 +29,7 @@ Currently, these files are in /proc/sys/vm:
 - drop-caches
 - zone_reclaim_mode
 - zone_reclaim_interval
+- panic_on_oom
 
 ==============================================================
 
@@ -178,3 +179,15 @@ Time is set in seconds and set by default to 30 seconds.
 Reduce the interval if undesired off node allocations occur. However, too
 frequent scans will have a negative impact onoff node allocation performance.
 
+=============================================================
+
+panic_on_oom
+
+This enables or disables panic on out-of-memory feature.  If this is set to 1,
+the kernel panics when out-of-memory happens.  If this is set to 0, the kernel
+will kill some rogue process, called oom_killer.  Usually, oom_killer can kill
+rogue processes and system will survive.  If you want to panic the system
+rather than killing rogue processes, set this to 1.
+
+The default value is 0.
+
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 63cb7edd177e..e65ec828d7aa 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -29,14 +29,13 @@ if usbmon is built into the kernel.
 
 # mount -t debugfs none_debugs /sys/kernel/debug
 # modprobe usbmon
+#
 
 Verify that bus sockets are present.
 
-[root@lembas zaitcev]# ls /sys/kernel/debug/usbmon
+# ls /sys/kernel/debug/usbmon
 1s  1t  2s  2t  3s  3t  4s  4t
-[root@lembas zaitcev]#
-
-# ls /sys/kernel
+#
 
 2. Find which bus connects to the desired device
 
@@ -76,7 +75,7 @@ that the file size is not excessive for your favourite editor.
 
 * Raw text data format
 
-The '0t' type data consists of a stream of events, such as URB submission,
+The '1t' type data consists of a stream of events, such as URB submission,
 URB callback, submission error. Every event is a text line, which consists
 of whitespace separated words. The number of position of words may depend
 on the event type, but there is a set of words, common for all types.
@@ -97,20 +96,25 @@ Here is the list of words, from left to right:
     Zi Zo   Isochronous input and output
     Ii Io   Interrupt input and output
     Bi Bo   Bulk input and output
-  Device address and Endpoint number are decimal numbers with leading zeroes
-  or 3 and 2 positions, correspondingly.
-- URB Status. This field makes no sense for submissions, but is present
-  to help scripts with parsing. In error case, it contains the error code.
-  In case of a setup packet, it contains a Setup Tag. If scripts read a number
-  in this field, they proceed to read Data Length. Otherwise, they read
-  the setup packet before reading the Data Length.
+  Device address and Endpoint number are 3-digit and 2-digit (respectively)
+  decimal numbers, with leading zeroes.
+- URB Status. In most cases, this field contains a number, sometimes negative,
+  which represents a "status" field of the URB. This field makes no sense for
+  submissions, but is present anyway to help scripts with parsing. When an
+  error occurs, the field contains the error code. In case of a submission of
+  a Control packet, this field contains a Setup Tag instead of an error code.
+  It is easy to tell whether the Setup Tag is present because it is never a
+  number. Thus if scripts find a number in this field, they proceed to read
+  Data Length. If they find something else, like a letter, they read the setup
+  packet before reading the Data Length.
 - Setup packet, if present, consists of 5 words: one of each for bmRequestType,
   bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0.
   These words are safe to decode if Setup Tag was 's'. Otherwise, the setup
   packet was present, but not captured, and the fields contain filler.
-- Data Length. This is the actual length in the URB.
+- Data Length. For submissions, this is the requested length. For callbacks,
+  this is the actual length.
 - Data tag. The usbmon may not always capture data, even if length is nonzero.
-  Only if tag is '=', the data words are present.
+  The data words are present only if this tag is '='.
 - Data words follow, in big endian hexadecimal format. Notice that they are
   not machine words, but really just a byte stream split into words to make
   it easier to read. Thus, the last word may contain from one to four bytes.
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index 0dd4ef30c361..99f89aa10169 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -26,8 +26,13 @@ a process are located. See also the numa_maps manpage in the numactl package.
 Manual migration is useful if for example the scheduler has relocated
 a process to a processor on a distant node. A batch scheduler or an
 administrator may detect the situation and move the pages of the process
-nearer to the new processor. At some point in the future we may have
-some mechanism in the scheduler that will automatically move the pages.
+nearer to the new processor. The kernel itself does only provide
+manual page migration support. Automatic page migration may be implemented
+through user space processes that move pages. A special function call
+"move_pages" allows the moving of individual pages within a process.
+A NUMA profiler may f.e. obtain a log showing frequent off node
+accesses and may use the result to move pages to more advantageous
+locations.
 
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
@@ -62,22 +67,14 @@ A. In kernel use of migrate_pages()
    It also prevents the swapper or other scans to encounter
    the page.
 
-2. Generate a list of newly allocates page. These pages will contain the
-   contents of the pages from the first list after page migration is
-   complete.
+2. We need to have a function of type new_page_t that can be
+   passed to migrate_pages(). This function should figure out
+   how to allocate the correct new page given the old page.
 
 3. The migrate_pages() function is called which attempts
-   to do the migration. It returns the moved pages in the
-   list specified as the third parameter and the failed
-   migrations in the fourth parameter. The first parameter
-   will contain the pages that could still be retried.
-
-4. The leftover pages of various types are returned
-   to the LRU using putback_to_lru_pages() or otherwise
-   disposed of. The pages will still have the refcount as
-   increased by isolate_lru_pages() if putback_to_lru_pages() is not
-   used! The kernel may want to handle the various cases of failures in
-   different ways.
+   to do the migration. It will call the function to allocate
+   the new page for each page that is considered for
+   moving.
 
 B. How migrate_pages() works
 ----------------------------
@@ -93,83 +90,58 @@ Steps:
 
 2. Insure that writeback is complete.
 
-3. Make sure that the page has assigned swap cache entry if
-   it is an anonyous page. The swap cache reference is necessary
-   to preserve the information contain in the page table maps while
-   page migration occurs.
-
-4. Prep the new page that we want to move to. It is locked
+3. Prep the new page that we want to move to. It is locked
    and set to not being uptodate so that all accesses to the new
    page immediately lock while the move is in progress.
 
-5. All the page table references to the page are either dropped (file
-   backed pages) or converted to swap references (anonymous pages).
-   This should decrease the reference count.
+4. The new page is prepped with some settings from the old page so that
+   accesses to the new page will discover a page with the correct settings.
+
+5. All the page table references to the page are converted
+   to migration entries or dropped (nonlinear vmas).
+   This decrease the mapcount of a page. If the resulting
+   mapcount is not zero then we do not migrate the page.
+   All user space processes that attempt to access the page
+   will now wait on the page lock.
 
 6. The radix tree lock is taken. This will cause all processes trying
-   to reestablish a pte to block on the radix tree spinlock.
+   to access the page via the mapping to block on the radix tree spinlock.
 
 7. The refcount of the page is examined and we back out if references remain
    otherwise we know that we are the only one referencing this page.
 
 8. The radix tree is checked and if it does not contain the pointer to this
-   page then we back out because someone else modified the mapping first.
-
-9. The mapping is checked. If the mapping is gone then a truncate action may
-   be in progress and we back out.
-
-10. The new page is prepped with some settings from the old page so that
-   accesses to the new page will be discovered to have the correct settings.
+   page then we back out because someone else modified the radix tree.
 
-11. The radix tree is changed to point to the new page.
+9. The radix tree is changed to point to the new page.
 
-12. The reference count of the old page is dropped because the radix tree
-    reference is gone.
+10. The reference count of the old page is dropped because the radix tree
+    reference is gone. A reference to the new page is established because
+    the new page is referenced to by the radix tree.
 
-13. The radix tree lock is dropped. With that lookups become possible again
-    and other processes will move from spinning on the tree lock to sleeping on
-    the locked new page.
+11. The radix tree lock is dropped. With that lookups in the mapping
+    become possible again. Processes will move from spinning on the tree_lock
+    to sleeping on the locked new page.
 
-14. The page contents are copied to the new page.
+12. The page contents are copied to the new page.
 
-15. The remaining page flags are copied to the new page.
+13. The remaining page flags are copied to the new page.
 
-16. The old page flags are cleared to indicate that the page does
-    not use any information anymore.
+14. The old page flags are cleared to indicate that the page does
+    not provide any information anymore.
 
-17. Queued up writeback on the new page is triggered.
+15. Queued up writeback on the new page is triggered.
 
-18. If swap pte's were generated for the page then replace them with real
-    ptes. This will reenable access for processes not blocked by the page lock.
+16. If migration entries were page then replace them with real ptes. Doing
+    so will enable access for user space processes not already waiting for
+    the page lock.
 
 19. The page locks are dropped from the old and new page.
-    Processes waiting on the page lock can continue.
+    Processes waiting on the page lock will redo their page faults
+    and will reach the new page.
 
 20. The new page is moved to the LRU and can be scanned by the swapper
     etc again.
 
-TODO list
----------
-
-- Page migration requires the use of swap handles to preserve the
-  information of the anonymous page table entries. This means that swap
-  space is reserved but never used. The maximum number of swap handles used
-  is determined by CHUNK_SIZE (see mm/mempolicy.c) per ongoing migration.
-  Reservation of pages could be avoided by having a special type of swap
-  handle that does not require swap space and that would only track the page
-  references. Something like that was proposed by Marcelo Tosatti in the
-  past (search for migration cache on lkml or linux-mm@kvack.org).
-
-- Page migration unmaps ptes for file backed pages and requires page
-  faults to reestablish these ptes. This could be optimized by somehow
-  recording the references before migration and then reestablish them later.
-  However, there are several locking challenges that have to be overcome
-  before this is possible.
-
-- Page migration generates read ptes for anonymous pages. Dirty page
-  faults are required to make the pages writable again. It may be possible
-  to generate a pte marked dirty if it is known that the page is dirty and
-  that this process has the only reference to that page.
-
-Christoph Lameter, March 8, 2006.
+Christoph Lameter, May 8, 2006.
 
diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490
new file mode 100644
index 000000000000..44a4918bd7f2
--- /dev/null
+++ b/Documentation/w1/masters/ds2490
@@ -0,0 +1,18 @@
+Kernel driver ds2490
+====================
+
+Supported chips:
+  * Maxim DS2490 based
+
+Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+
+
+Description
+-----------
+
+The Maixm/Dallas Semiconductor DS2490 is a chip
+which allows to build USB <-> W1 bridges.
+
+DS9490(R) is a USB <-> W1 bus master device
+which has 0x81 family ID integrated chip and DS2490
+low-level operational chip.
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic
index f937fbe1cacb..4c6509dd4789 100644
--- a/Documentation/w1/w1.generic
+++ b/Documentation/w1/w1.generic
@@ -27,8 +27,19 @@ When a w1 master driver registers with the w1 subsystem, the following occurs:
 
 When a device is found on the bus, w1 core checks if driver for it's family is
 loaded. If so, the family driver is attached to the slave.
-If there is no driver for the family, a simple sysfs entry is created
-for the slave device.
+If there is no driver for the family, default one is assigned, which allows to perform
+almost any kind of operations. Each logical operation is a transaction
+in nature, which can contain several (two or one) low-level operations.
+Let's see how one can read EEPROM context:
+1. one must write control buffer, i.e. buffer containing command byte
+and two byte address. At this step bus is reset and appropriate device
+is selected using either W1_SKIP_ROM or W1_MATCH_ROM command.
+Then provided control buffer is being written to the wire.
+2. reading. This will issue reading eeprom response.
+
+It is possible that between 1. and 2. w1 master thread will reset bus for searching
+and slave device will be even removed, but in this case 0xff will
+be read, since no device was selected.
 
 
 W1 device families
@@ -89,4 +100,5 @@ driver             - (standard) symlink to the w1 driver
 name               - the device name, usually the same as the directory name
 w1_slave           - (optional) a binary file whose meaning depends on the
                      family driver
-
+rw		   - (optional) created for slave devices which do not have
+		     appropriate family driver. Allows to read/write binary data.
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
new file mode 100644
index 000000000000..3640c7c87d45
--- /dev/null
+++ b/Documentation/w1/w1.netlink
@@ -0,0 +1,98 @@
+Userspace communication protocol over connector [1].
+
+
+Message types.
+=============
+
+There are three types of messages between w1 core and userspace:
+1. Events. They are generated each time new master or slave device found
+	either due to automatic or requested search.
+2. Userspace commands. Includes read/write and search/alarm search comamnds.
+3. Replies to userspace commands.
+
+
+Protocol.
+========
+
+[struct cn_msg] - connector header. It's length field is equal to size of the attached data.
+[struct w1_netlink_msg] - w1 netlink header.
+	__u8 type 	- message type.
+			W1_SLAVE_ADD/W1_SLAVE_REMOVE - slave add/remove events.
+			W1_MASTER_ADD/W1_MASTER_REMOVE - master add/remove events.
+			W1_MASTER_CMD - userspace command for bus master device (search/alarm search).
+			W1_SLAVE_CMD - userspace command for slave device (read/write/ search/alarm search
+					for bus master device where given slave device found).
+	__u8 res	- reserved
+	__u16 len	- size of attached to this header data.
+	union {
+		__u8 id;			 - slave unique device id
+		struct w1_mst {
+			__u32		id;	 - master's id.
+			__u32		res;	 - reserved
+		} mst;
+	} id;
+
+[strucrt w1_netlink_cmd] - command for gived master or slave device.
+	__u8 cmd	- command opcode.
+			W1_CMD_READ 	- read command.
+			W1_CMD_WRITE	- write command.
+			W1_CMD_SEARCH	- search command.
+			W1_CMD_ALARM_SEARCH - alarm search command.
+	__u8 res	- reserved
+	__u16 len	- length of data for this command.
+			For read command data must be allocated like for write command.
+	__u8 data[0]	- data for this command.
+
+
+Each connector message can include one or more w1_netlink_msg with zero of more attached w1_netlink_cmd messages.
+
+For event messages there are no w1_netlink_cmd embedded structures, only connector header
+and w1_netlink_msg strucutre with "len" field being zero and filled type (one of event types)
+and id - either 8 bytes of slave unique id in host order, or master's id, which is assigned
+to bus master device when it is added to w1 core.
+
+Currently replies to userspace commands are only generated for read command request.
+One reply is generated exactly for one w1_netlink_cmd read request.
+Replies are not combined when sent - i.e. typical reply messages looks like the following:
+[cn_msg][w1_netlink_msg][w1_netlink_cmd]
+cn_msg.len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd) + cmd->len;
+w1_netlink_msg.len = sizeof(struct w1_netlink_cmd) + cmd->len;
+w1_netlink_cmd.len = cmd->len;
+
+
+Operation steps in w1 core when new command is received.
+=======================================================
+
+When new message (w1_netlink_msg) is received w1 core detects if it is master of slave request,
+according to w1_netlink_msg.type field.
+Then master or slave device is searched for.
+When found, master device (requested or those one on where slave device is found) is locked.
+If slave command is requested, then reset/select procedure is started to select given device.
+
+Then all requested in w1_netlink_msg operations are performed one by one.
+If command requires reply (like read command) it is sent on command completion.
+
+When all commands (w1_netlink_cmd) are processed muster device is unlocked
+and next w1_netlink_msg header processing started.
+
+
+Connector [1] specific documentation.
+====================================
+
+Each connector message includes two u32 fields as "address".
+w1 uses CN_W1_IDX and CN_W1_VAL defined in include/linux/connector.h header.
+Each message also includes sequence and acknowledge numbers.
+Sequence number for event messages is appropriate bus master sequence number increased with
+each event message sent "through" this master.
+Sequence number for userspace requests is set by userspace application.
+Sequence number for reply is the same as was in request, and
+acknowledge number is set to seq+1.
+
+
+Additional documantion, source code examples.
+============================================
+
+1. Documentation/connector
+2. http://tservice.net.ru/~s0mbre/archive/w1
+This archive includes userspace application w1d.c which
+uses read/write/search commands for all master/slave devices found on the bus.