Merge tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Cross-subsystem Changes:

- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)

Core Changes:

The most important changes are:

- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)

Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements.  And a bunch of misc improvements, clean ups and style
changes and doc updates

[airlied: drop eld bits from amdgpu_dm]

Driver Changes:

- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)

* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
  drm/bridge: tc358767: add copyright lines
  MAINTAINERS: change maintainer for Rockchip drm drivers
  drm/vblank: Fix vblank timestamp debugs
  drm/via: use monotonic time for VIA_WAIT_IRQ
  dma-buf: Fix ifnullfree.cocci warnings
  drm/printer: Add drm_vprintf()
  drm/edid: Allow HDMI infoframe without VIC or S3D
  video/hdmi: Allow "empty" HDMI infoframes
  dma-buf/fence: Fix lock inversion within dma-fence-array
  drm/sti: Handle return value of platform_get_irq_byname
  drm/vc4: Add support for NV21 and NV61.
  drm/vc4: Use .pixel_order instead of custom .flip_cbcr
  drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
  drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
  drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
  drm/vmwgfx: Try to fix plane clipping
  drm/vmwgfx: Use drm_plane_helper_check_state()
  drm/vmwgfx: Remove bogus crtc coords vs fb size check
  gpu: gma500: remove unneeded DRIVER_LICENSE #define
  drm: don't link DP aux i2c adapter to the hardware device node
  ...

5 files changed, 46 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
new file mode 100644
index 000000000000..7d8f6eeef6d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt
@@ -0,0 +1,7 @@
+Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "mitsubishi,aa070mc01-ca1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt
new file mode 100644
index 000000000000..b25261e63a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt
@@ -0,0 +1,29 @@
+Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "tianma,tm070rvhg71"
+- power-supply: single regulator to provide the supply voltage
+- backlight: phandle of the backlight device attached to the panel
+
+Required nodes:
+- port: LVDS port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX6Q based board
+
+	panel: panel-lvds0 {
+		compatible = "tianma,tm070rvhg71";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index 5d835d9c1ba8..eeda3597011e 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -7,6 +7,7 @@ buffer to an external LCD interface.
 Required properties:
 - compatible: value should be one of the following
 		"rockchip,rk3036-vop";
+		"rockchip,rk3126-vop";
 		"rockchip,rk3288-vop";
 		"rockchip,rk3368-vop";
 		"rockchip,rk3366-vop";
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 74b5ac7b26d6..029252253ad4 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -10,7 +10,11 @@
       - "lcd" for the clock feeding the output pixel clock & IP clock.
   - resets: reset to be used by the device (defined by use of RCC macro).
   Required nodes:
-    - Video port for RGB output.
+  - Video port for DPI RGB output: ltdc has one video port with up to 2
+    endpoints:
+      - for external dpi rgb panel or bridge, using gpios.
+      - for internal dpi input of the MIPI DSI host controller.
+      Note: These 2 endpoints cannot be activated simultaneously.
 
 * STMicroelectronics STM32 DSI controller specific extensions to Synopsys
   DesignWare MIPI DSI host controller
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 36625aa66c27..01eaa40dafc9 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -179,6 +179,10 @@ don't do this, drivers used dev_info/warn/err to make this differentiation. We
 now have DRM_DEV_* variants of the drm print macros, so we can start to convert
 those drivers back to using drm-formwatted specific log messages.
 
+Before you start this conversion please contact the relevant maintainers to make
+sure your work will be merged - not everyone agrees that the DRM dmesg macros
+are better.
+
 Contact: Sean Paul, Maintainer of the driver you plan to convert
 
 Core refactorings