V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux

- Move documentation for usb v4l devices from
  Documentation/usb to Documentation/video4linux.
- Removed trailing whitespace.
- Update Kconfig help text links to reflect the new file locations.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 288 insertions, 0 deletions

diff --git a/Documentation/video4linux/ov511.txt b/Documentation/video4linux/ov511.txt
new file mode 100644
index 000000000000..142741e3c578
--- /dev/null
+++ b/Documentation/video4linux/ov511.txt
@@ -0,0 +1,288 @@
+-------------------------------------------------------------------------------
+Readme for Linux device driver for the OmniVision OV511 USB to camera bridge IC
+-------------------------------------------------------------------------------
+
+Author: Mark McClelland
+Homepage: http://alpha.dyndns.org/ov511
+
+INTRODUCTION:
+
+This is a driver for the OV511, a USB-only chip used in many "webcam" devices.
+Any camera using the OV511/OV511+ and the OV6620/OV7610/20/20AE should work.
+Video capture devices that use the Philips SAA7111A decoder also work. It
+supports streaming and capture of color or monochrome video via the Video4Linux
+API. Most V4L apps are compatible with it. Most resolutions with a width and
+height that are a multiple of 8 are supported.
+
+If you need more information, please visit the OV511 homepage at the above URL.
+
+WHAT YOU NEED:
+
+- If you want to help with the development, get the chip's specification docs at
+  http://www.ovt.com/omniusbp.html
+
+- A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv)
+    vidcat is part of the w3cam package:  http://mpx.freeshell.net/
+    xawtv is available at:  http://linux.bytesex.org/xawtv/
+
+HOW TO USE IT:
+
+Note: These are simplified instructions. For complete instructions see:
+	http://alpha.dyndns.org/ov511/install.html
+
+You must have first compiled USB support, support for your specific USB host
+controller (UHCI or OHCI), and Video4Linux support for your kernel (I recommend
+making them modules.) Make sure "Enforce bandwidth allocation" is NOT enabled.
+
+Next, (as root):
+
+	modprobe usbcore
+	modprobe usb-uhci  <OR>  modprobe usb-ohci
+	modprobe videodev
+	modprobe ov511
+
+If it is not already there (it usually is), create the video device:
+
+	mknod /dev/video0 c 81 0
+
+Optionally, symlink /dev/video to /dev/video0
+
+You will have to set permissions on this device to allow you to read/write
+from it:
+
+	chmod 666 /dev/video
+	chmod 666 /dev/video0 (if necessary)
+
+Now you are ready to run a video app! Both vidcat and xawtv work well for me
+at 640x480.
+
+[Using vidcat:]
+
+	vidcat -s 640x480 -p c > test.jpg
+	xview test.jpg
+
+[Using xawtv:]
+
+From the main xawtv directory:
+
+	make clean
+	./configure
+	make
+	make install
+
+Now you should be able to run xawtv. Right click for the options dialog.
+
+MODULE PARAMETERS:
+
+  You can set these with:  insmod ov511 NAME=VALUE
+  There is currently no way to set these on a per-camera basis.
+
+  NAME: autobright
+  TYPE: integer (Boolean)
+  DEFAULT: 1
+  DESC: Brightness is normally under automatic control and can't be set
+        manually by the video app. Set to 0 for manual control.
+
+  NAME: autogain
+  TYPE: integer (Boolean)
+  DEFAULT: 1
+  DESC: Auto Gain Control enable. This feature is not yet implemented.
+
+  NAME: autoexp
+  TYPE: integer (Boolean)
+  DEFAULT: 1
+  DESC: Auto Exposure Control enable. This feature is not yet implemented.
+
+  NAME: debug
+  TYPE: integer (0-6)
+  DEFAULT: 3
+  DESC: Sets the threshold for printing debug messages. The higher the value,
+        the more is printed. The levels are cumulative, and are as follows:
+          0=no debug messages
+          1=init/detection/unload and other significant messages
+          2=some warning messages
+          3=config/control function calls
+          4=most function calls and data parsing messages
+          5=highly repetitive mesgs
+
+  NAME: snapshot
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: Set to 1 to enable snapshot mode. read()/VIDIOCSYNC will block until
+	the snapshot button is pressed. Note: enabling this mode disables
+	/proc/video/ov511/<minor#>/button
+
+  NAME: cams
+  TYPE: integer (1-4 for OV511, 1-31 for OV511+)
+  DEFAULT: 1
+  DESC: Number of cameras allowed to stream simultaneously on a single bus.
+        Values higher than 1 reduce the data rate of each camera, allowing two
+        or more to be used at once. If you have a complicated setup involving
+        both OV511 and OV511+ cameras, trial-and-error may be necessary for
+        finding the optimum setting.
+
+  NAME: compress
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: Set this to 1 to turn on the camera's compression engine. This can
+        potentially increase the frame rate at the expense of quality, if you
+        have a fast CPU. You must load the proper compression module for your
+        camera before starting your application (ov511_decomp or ov518_decomp).
+
+  NAME: testpat
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: This configures the camera's sensor to transmit a colored test-pattern
+        instead of an image. This does not work correctly yet.
+
+  NAME: dumppix
+  TYPE: integer (0-2)
+  DEFAULT: 0
+  DESC: Dumps raw pixel data and skips post-processing and format conversion.
+	It is for debugging purposes only. Options are:
+		0: Disable (default)
+		1: Dump raw data from camera, excluding headers and trailers
+		2: Dumps data exactly as received from camera
+
+  NAME: led
+  TYPE: integer (0-2)
+  DEFAULT: 1 (Always on)
+  DESC: Controls whether the LED (the little light) on the front of the camera
+	is always off (0), always on (1), or only on when driver is open (2).
+	This is not supported with the OV511, and might only work with certain
+	cameras (ones that actually have the LED wired to the control pin, and
+	not just hard-wired to be on all the time).
+
+  NAME: dump_bridge
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: Dumps the bridge (OV511[+] or OV518[+]) register values to the system
+	log. Only useful for serious debugging/development purposes.
+
+  NAME: dump_sensor
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: Dumps the sensor register values to the system log. Only useful for
+	serious debugging/development purposes.
+
+  NAME: printph
+  TYPE: integer (Boolean)
+  DEFAULT: 0
+  DESC: Setting this to 1 will dump the first 12 bytes of each isoc frame. This
+	is only useful if you are trying to debug problems with the isoc data
+	stream (i.e.: camera initializes, but vidcat hangs until Ctrl-C). Be
+	warned that this dumps a large number of messages to your kernel log.
+
+  NAME: phy, phuv, pvy, pvuv, qhy, qhuv, qvy, qvuv
+  TYPE: integer (0-63 for phy and phuv, 0-255 for rest)
+  DEFAULT: OV511 default values
+  DESC: These are registers 70h - 77h of the OV511, which control the
+	prediction ranges and quantization thresholds of the compressor, for
+	the Y and UV channels in the horizontal and vertical directions. See
+	the OV511 or OV511+ data sheet for more detailed descriptions. These
+	normally do not need to be changed.
+
+  NAME: lightfreq
+  TYPE: integer (0, 50, or 60)
+  DEFAULT: 0 (use sensor default)
+  DESC: Sets the sensor to match your lighting frequency. This can reduce the
+	appearance of "banding", i.e. horizontal lines or waves of light and
+	dark that are often caused by artificial lighting. Valid values are:
+		0 - Use default (depends on sensor, most likely 60 Hz)
+		50 - For European and Asian 50 Hz power
+		60 - For American 60 Hz power
+
+  NAME: bandingfilter
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Enables the sensorīs banding filter exposure algorithm. This reduces
+	or stabilizes the "banding" caused by some artificial light sources
+	(especially fluorescent). You might have to set lightfreq correctly for
+	this to work right. As an added bonus, this sometimes makes it
+	possible to capture your monitorīs output.
+
+  NAME: fastset
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Allows picture settings (brightness, contrast, color, and hue) to take
+	effect immediately, even in the middle of a frame. This reduces the
+	time to change settings, but can ruin frames during the change. Only
+	affects OmniVision sensors.
+
+  NAME: force_palette
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Forces the palette (color format) to a specific value. If an
+	application requests a different palette, it will be rejected, thereby
+	forcing it to try others until it succeeds. This is useful for forcing
+	greyscale mode with a color camera, for example. Supported modes are:
+		0                           (Allows all the following formats)
+		1   VIDEO_PALETTE_GREY      (Linear greyscale)
+		10  VIDEO_PALETTE_YUV420    (YUV 4:2:0 Planar)
+		15  VIDEO_PALETTE_YUV420P   (YUV 4:2:0 Planar, same as 10)
+
+  NAME: backlight
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Setting this flag changes the exposure algorithm for OmniVision sensors
+	such that objects in the camera's view (i.e. your head) can be clearly
+	seen when they are illuminated from behind. It reduces or eliminates
+	the sensor's auto-exposure function, so it should only be used when
+	needed. Additionally, it is only supported with the OV6620 and OV7620.
+
+  NAME: unit_video
+  TYPE: Up to 16 comma-separated integers
+  DEFAULT: 0,0,0... (automatically assign the next available minor(s))
+  DESC: You can specify up to 16 minor numbers to be assigned to ov511 devices.
+	For example, "unit_video=1,3" will make the driver use /dev/video1 and
+	/dev/video3 for the first two devices it detects. Additional devices
+	will be assigned automatically starting at the first available device
+	node (/dev/video0 in this case). Note that you cannot specify 0 as a
+	minor number. This feature requires kernel version 2.4.5 or higher.
+
+  NAME: remove_zeros
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (do not skip any incoming data)
+  DESC: Setting this to 1 will remove zero-padding from incoming data. This
+	will compensate for the blocks of corruption that can appear when the
+	camera cannot keep up with the speed of the USB bus (eg. at low frame
+	resolutions). This feature is always enabled when compression is on.
+
+  NAME: mirror
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Setting this to 1 will reverse ("mirror") the image horizontally. This
+	might be necessary if your camera has a custom lens assembly. This has
+	no effect with video capture devices.
+
+  NAME: ov518_color
+  TYPE: integer (Boolean)
+  DEFAULT: 0 (off)
+  DESC: Enable OV518 color support. This is off by default since it doesn't
+	work most of the time. If you want to try it, you must also load
+	ov518_decomp with the "nouv=0" parameter. If you get improper colors or
+	diagonal lines through the image, restart your video app and try again.
+	Repeat as necessary.
+
+WORKING FEATURES:
+ o Color streaming/capture at most widths and heights that are multiples of 8.
+ o Monochrome (use force_palette=1 to enable)
+ o Setting/getting of saturation, contrast, brightness, and hue (only some of
+   them work the OV7620 and OV7620AE)
+ o /proc status reporting
+ o SAA7111A video capture support at 320x240 and 640x480
+ o Compression support
+ o SMP compatibility
+
+HOW TO CONTACT ME:
+
+You can email me at mark@alpha.dyndns.org . Please prefix the subject line
+with "OV511: " so that I am certain to notice your message.
+
+CREDITS:
+
+The code is based in no small part on the CPiA driver by Johannes Erdfelt,
+Randy Dunlap, and others. Big thanks to them for their pioneering work on that
+and the USB stack. Thanks to Bret Wallach for getting camera reg IO, ISOC, and
+image capture working. Thanks to Orion Sky Lawlor, Kevin Moore, and Claudio
+Matsuoka for their work as well.