summaryrefslogtreecommitdiff
path: root/Documentation/userspace-api
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-09-01 20:34:52 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-09-01 20:34:52 +0300
commit835d31d319d9c8c4eb6cac074643360ba0ecab10 (patch)
tree824dc6286c3f34357de0a0c12d0311eca9a6da8d /Documentation/userspace-api
parent0d290223a6c77107b1c3988959e49279a8dafaba (diff)
parent9c3a0f285248899dfa81585bc5d5bc9ebdb8fead (diff)
downloadlinux-835d31d319d9c8c4eb6cac074643360ba0ecab10.tar.xz
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - new sensor drivers: imx335, imx412, ov9282 - new IR transmitter driver: meson-ir-tx - handro driver gained support for H.264 for Rockchip VDPU2 - imx gained support for i.MX8MQ - ti-vpe has gained support for other SoC variants - lots of cleanups, fixes, board additions and doc improvements * tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits) media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control media: venus: venc: Add support for intra-refresh period media: v4l2-ctrls: Add intra-refresh period control media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value media: venus: helper: do not set constrained parameters for UBWC media: venus: venc: Fix potential null pointer dereference on pointer fmt media: venus: hfi: fix return value check in sys_get_prop_image_version() media: tegra-cec: Handle errors of clk_prepare_enable() media: cec-pin: rename timer overrun variables media: TDA1997x: report -ENOLINK after disconnecting HDMI source media: TDA1997x: fix tda1997x_query_dv_timings() return value media: Fix cosmetic error in TDA1997x driver media: v4l2-dv-timings.c: fix wrong condition in two for-loops media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: imx7_mipi_csis: convert some switch cases to the default media: imx: imx7-media-csi: Fix buffer return upon stream start failure media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1 media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support ...
Diffstat (limited to 'Documentation/userspace-api')
-rw-r--r--Documentation/userspace-api/media/cec.h.rst.exceptions2
-rw-r--r--Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst22
-rw-r--r--Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst29
3 files changed, 37 insertions, 16 deletions
diff --git a/Documentation/userspace-api/media/cec.h.rst.exceptions b/Documentation/userspace-api/media/cec.h.rst.exceptions
index d83790ccac8e..13de01d9555e 100644
--- a/Documentation/userspace-api/media/cec.h.rst.exceptions
+++ b/Documentation/userspace-api/media/cec.h.rst.exceptions
@@ -140,7 +140,7 @@ ignore define CEC_OP_REC_SEQ_TUESDAY
ignore define CEC_OP_REC_SEQ_WEDNESDAY
ignore define CEC_OP_REC_SEQ_THURSDAY
ignore define CEC_OP_REC_SEQ_FRIDAY
-ignore define CEC_OP_REC_SEQ_SATERDAY
+ignore define CEC_OP_REC_SEQ_SATURDAY
ignore define CEC_OP_REC_SEQ_ONCE_ONLY
ignore define CEC_MSG_CLEAR_DIGITAL_TIMER
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 8c6e2a11ed95..976d34445a24 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1174,7 +1174,24 @@ enum v4l2_mpeg_video_h264_entropy_mode -
Cyclic intra macroblock refresh. This is the number of continuous
macroblocks refreshed every frame. Each frame a successive set of
macroblocks is refreshed until the cycle completes and starts from
- the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
+ the top of the frame. Setting this control to zero means that
+ macroblocks will not be refreshed. Note that this control will not
+ take effect when ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD`` control
+ is set to non zero value.
+ Applicable to H264, H263 and MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
+ Intra macroblock refresh period. This sets the period to refresh
+ the whole frame. In other words, this defines the number of frames
+ for which the whole frame will be intra-refreshed. An example:
+ setting period to 1 means that the whole frame will be refreshed,
+ setting period to 2 means that the half of macroblocks will be
+ intra-refreshed on frameX and the other half of macroblocks
+ will be refreshed in frameX + 1 and so on. Setting the period to
+ zero means no period is specified.
+ Note that if the client sets this control to non zero value the
+ ``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB`` control shall be
+ ignored. Applicable to H264 and HEVC encoders.
``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
Frame level rate control enable. If this control is disabled then
@@ -3000,6 +3017,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
* - __u8
- ``pic_struct``
-
+ * - __u32
+ - ``slice_segment_addr``
+ -
* - __u8
- ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
- The list of L0 reference elements as indices in the DPB.
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
index 87698c15c027..b1c2ab2854af 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
@@ -20,25 +20,26 @@ Image Process Control IDs
``V4L2_CID_IMAGE_PROC_CLASS (class)``
The IMAGE_PROC class descriptor.
+.. _v4l2-cid-link-freq:
+
``V4L2_CID_LINK_FREQ (integer menu)``
- Data bus frequency. Together with the media bus pixel code, bus type
- (clock cycles per sample), the data bus frequency defines the pixel
- rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly
- elsewhere, if the device is not an image sensor). The frame rate can
- be calculated from the pixel clock, image width and height and
- horizontal and vertical blanking. While the pixel rate control may
- be defined elsewhere than in the subdev containing the pixel array,
- the frame rate cannot be obtained from that information. This is
- because only on the pixel array it can be assumed that the vertical
- and horizontal blanking information is exact: no other blanking is
- allowed in the pixel array. The selection of frame rate is performed
- by selecting the desired horizontal and vertical blanking. The unit
- of this control is Hz.
+ The frequency of the data bus (e.g. parallel or CSI-2).
+
+.. _v4l2-cid-pixel-rate:
``V4L2_CID_PIXEL_RATE (64-bit integer)``
- Pixel rate in the source pads of the subdev. This control is
+ Pixel sampling rate in the device's pixel array. This control is
read-only and its unit is pixels / second.
+ Some devices use horizontal and vertical balanking to configure the frame
+ rate. The frame rate can be calculated from the pixel rate, analogue crop
+ rectangle as well as horizontal and vertical blanking. The pixel rate
+ control may be present in a different sub-device than the blanking controls
+ and the analogue crop rectangle configuration.
+
+ The configuration of the frame rate is performed by selecting the desired
+ horizontal and vertical blanking. The unit of this control is Hz.
+
``V4L2_CID_TEST_PATTERN (menu)``
Some capture/display/sensor devices have the capability to generate
test pattern images. These hardware specific test patterns can be