Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 2 insertions, 797 deletions

diff --git a/Documentation/userspace-api/ioctl/hdio.rst b/Documentation/userspace-api/ioctl/hdio.rst
index 817371bf94e9..6ee8fc88699f 100644
--- a/Documentation/userspace-api/ioctl/hdio.rst
+++ b/Documentation/userspace-api/ioctl/hdio.rst
@@ -7,8 +7,8 @@ Summary of `HDIO_` ioctl calls
 November, 2004
 
 This document attempts to describe the ioctl(2) calls supported by
-the HD/IDE layer.  These are by-and-large implemented (as of Linux 2.6)
-in drivers/ide/ide.c and drivers/block/scsi_ioctl.c
+the HD/IDE layer.  These are by-and-large implemented (as of Linux 5.11)
+drivers/ata/libata-scsi.c.
 
 ioctl values are listed in <linux/hdreg.h>.  As of this writing, they
 are as follows:
@@ -17,50 +17,17 @@ are as follows:
 
 	=======================	=======================================
 	HDIO_GETGEO		get device geometry
-	HDIO_GET_UNMASKINTR	get current unmask setting
-	HDIO_GET_MULTCOUNT	get current IDE blockmode setting
-	HDIO_GET_QDMA		get use-qdma flag
-	HDIO_SET_XFER		set transfer rate via proc
-	HDIO_OBSOLETE_IDENTITY	OBSOLETE, DO NOT USE
-	HDIO_GET_KEEPSETTINGS	get keep-settings-on-reset flag
 	HDIO_GET_32BIT		get current io_32bit setting
-	HDIO_GET_NOWERR		get ignore-write-error flag
-	HDIO_GET_DMA		get use-dma flag
-	HDIO_GET_NICE		get nice flags
 	HDIO_GET_IDENTITY	get IDE identification info
-	HDIO_GET_WCACHE		get write cache mode on|off
-	HDIO_GET_ACOUSTIC	get acoustic value
-	HDIO_GET_ADDRESS	get sector addressing mode
-	HDIO_GET_BUSSTATE	get the bus state of the hwif
-	HDIO_TRISTATE_HWIF	execute a channel tristate
-	HDIO_DRIVE_RESET	execute a device reset
 	HDIO_DRIVE_TASKFILE	execute raw taskfile
 	HDIO_DRIVE_TASK		execute task and special drive command
 	HDIO_DRIVE_CMD		execute a special drive command
-	HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
 	=======================	=======================================
 
     ioctls that pass non-pointer values:
 
 	=======================	=======================================
-	HDIO_SET_MULTCOUNT	change IDE blockmode
-	HDIO_SET_UNMASKINTR	permit other irqs during I/O
-	HDIO_SET_KEEPSETTINGS	keep ioctl settings on reset
 	HDIO_SET_32BIT		change io_32bit flags
-	HDIO_SET_NOWERR		change ignore-write-error flag
-	HDIO_SET_DMA		change use-dma flag
-	HDIO_SET_PIO_MODE	reconfig interface to new speed
-	HDIO_SCAN_HWIF		register and (re)scan interface
-	HDIO_SET_NICE		set nice flags
-	HDIO_UNREGISTER_HWIF	unregister interface
-	HDIO_SET_WCACHE		change write cache enable-disable
-	HDIO_SET_ACOUSTIC	change acoustic behavior
-	HDIO_SET_BUSSTATE	set the bus state of the hwif
-	HDIO_SET_QDMA		change use-qdma flag
-	HDIO_SET_ADDRESS	change lba addressing modes
-
-	HDIO_SET_IDE_SCSI	Set scsi emulation mode on/off
-	HDIO_SET_SCSI_IDE	not implemented yet
 	=======================	=======================================
 
 
@@ -137,143 +104,6 @@ HDIO_GETGEO
 
 
 
-
-HDIO_GET_UNMASKINTR
-	get current unmask setting
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_UNMASKINTR, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the drive's current unmask setting
-
-
-
-
-
-HDIO_SET_UNMASKINTR
-	permit other irqs during I/O
-
-
-	usage::
-
-	  unsigned long val;
-
-	  ioctl(fd, HDIO_SET_UNMASKINTR, val);
-
-	inputs:
-		New value for unmask flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-
-HDIO_GET_MULTCOUNT
-	get current IDE blockmode setting
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_MULTCOUNT, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current IDE block mode setting.  This
-		controls how many sectors the drive will transfer per
-		interrupt.
-
-
-
-HDIO_SET_MULTCOUNT
-	change IDE blockmode
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_MULTCOUNT, val);
-
-	inputs:
-		New value for IDE block mode setting.  This controls how many
-		sectors the drive will transfer per interrupt.
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range supported by disk.
-	  - EBUSY	Controller busy or blockmode already set.
-	  - EIO		Drive did not accept new block mode.
-
-	notes:
-	  Source code comments read::
-
-	    This is tightly woven into the driver->do_special cannot
-	    touch.  DON'T do it again until a total personality rewrite
-	    is committed.
-
-	  If blockmode has already been set, this ioctl will fail with
-	  -EBUSY
-
-
-
-HDIO_GET_QDMA
-	get use-qdma flag
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_XFER
-	set transfer rate via proc
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_OBSOLETE_IDENTITY
-	OBSOLETE, DO NOT USE
-
-
-	Same as HDIO_GET_IDENTITY (see below), except that it only
-	returns the first 142 bytes of drive identity information.
-
-
-
 HDIO_GET_IDENTITY
 	get IDE identification info
 
@@ -308,60 +138,6 @@ HDIO_GET_IDENTITY
 
 
 
-HDIO_GET_KEEPSETTINGS
-	get keep-settings-on-reset flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_KEEPSETTINGS, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current "keep settings" flag
-
-
-
-	notes:
-		When set, indicates that kernel should restore settings
-		after a drive reset.
-
-
-
-HDIO_SET_KEEPSETTINGS
-	keep ioctl settings on reset
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_KEEPSETTINGS, val);
-
-	inputs:
-		New value for keep_settings flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY		Controller busy
-
-
-
 HDIO_GET_32BIT
 	get current io_32bit setting
 
@@ -387,288 +163,6 @@ HDIO_GET_32BIT
 
 
 
-
-
-HDIO_GET_NOWERR
-	get ignore-write-error flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_NOWERR, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current ignore-write-error flag
-
-
-
-
-
-HDIO_GET_DMA
-	get use-dma flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_DMA, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current use-dma flag
-
-
-
-
-
-HDIO_GET_NICE
-	get nice flags
-
-
-	usage::
-
-	  long nice;
-
-	  ioctl(fd, HDIO_GET_NICE, &nice);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The drive's "nice" values.
-
-
-
-	notes:
-		Per-drive flags which determine when the system will give more
-		bandwidth to other devices sharing the same IDE bus.
-
-		See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
-
-
-
-
-HDIO_SET_NICE
-	set nice flags
-
-
-	usage::
-
-	  unsigned long nice;
-
-	  ...
-	  ioctl(fd, HDIO_SET_NICE, nice);
-
-	inputs:
-		bitmask of nice flags.
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EPERM	Flags other than DSC_OVERLAP and NICE_1 set.
-	  - EPERM	DSC_OVERLAP specified but not supported by drive
-
-	notes:
-		This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
-		provided by the user.
-
-		Nice flags are listed in <linux/hdreg.h>, starting with
-		IDE_NICE_DSC_OVERLAP.  These values represent shifts.
-
-
-
-
-
-HDIO_GET_WCACHE
-	get write cache mode on|off
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_WCACHE, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current write cache mode
-
-
-
-
-
-HDIO_GET_ACOUSTIC
-	get acoustic value
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_ACOUSTIC, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current acoustic settings
-
-
-
-	notes:
-		See HDIO_SET_ACOUSTIC
-
-
-
-
-
-HDIO_GET_ADDRESS
-	usage::
-
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_ADDRESS, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current addressing mode:
-
-	    =  ===================
-	    0  28-bit
-	    1  48-bit
-	    2  48-bit doing 28-bit
-	    3  64-bit
-	    =  ===================
-
-
-
-HDIO_GET_BUSSTATE
-	get the bus state of the hwif
-
-
-	usage::
-
-	  long state;
-
-	  ioctl(fd, HDIO_SCAN_HWIF, &state);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		Current power state of the IDE bus.  One of BUSSTATE_OFF,
-		BUSSTATE_ON, or BUSSTATE_TRISTATE
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-
-
-
-
-HDIO_SET_BUSSTATE
-	set the bus state of the hwif
-
-
-	usage::
-
-	  int state;
-
-	  ...
-	  ioctl(fd, HDIO_SCAN_HWIF, state);
-
-	inputs:
-		Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
-		or BUSSTATE_TRISTATE
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  - EOPNOTSUPP	Hardware interface does not support bus power control
-
-
-
-
-HDIO_TRISTATE_HWIF
-	execute a channel tristate
-
-
-	Not implemented, as of 2.6.8.1.  See HDIO_SET_BUSSTATE
-
-
-
-HDIO_DRIVE_RESET
-	execute a device reset
-
-
-	usage::
-
-	  int args[3]
-
-	  ...
-	  ioctl(fd, HDIO_DRIVE_RESET, args);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - ENXIO	No such device:	phy dead or ctl_addr == 0
-	  - EIO		I/O error:	reset timed out or hardware error
-
-	notes:
-
-	  - Execute a reset on the device as soon as the current IO
-	    operation has completed.
-
-	  - Executes an ATAPI soft reset if applicable, otherwise
-	    executes an ATA soft reset on the controller.
-
-
-
 HDIO_DRIVE_TASKFILE
 	execute raw taskfile
 
@@ -1026,14 +520,6 @@ HDIO_DRIVE_TASK
 
 
 
-HDIO_DRIVE_CMD_AEB
-	HDIO_DRIVE_TASK
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
 HDIO_SET_32BIT
 	change io_32bit flags
 
@@ -1059,284 +545,3 @@ HDIO_SET_32BIT
 	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
 	  - EINVAL	value out of range [0 3]
 	  - EBUSY	Controller busy
-
-
-
-
-HDIO_SET_NOWERR
-	change ignore-write-error flag
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_NOWERR, val);
-
-	inputs:
-		New value for ignore-write-error flag.  Used for ignoring
-
-
-	  WRERR_STAT
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY		Controller busy
-
-
-
-HDIO_SET_DMA
-	change use-dma flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_DMA, val);
-
-	inputs:
-		New value for use-dma flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_PIO_MODE
-	reconfig interface to new speed
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_PIO_MODE, val);
-
-	inputs:
-		New interface speed.
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 255]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SCAN_HWIF
-	register and (re)scan interface
-
-
-	usage::
-
-	  int args[3]
-
-	  ...
-	  ioctl(fd, HDIO_SCAN_HWIF, args);
-
-	inputs:
-
-	  =======	=========================
-	  args[0]	io address to probe
-
-
-	  args[1]	control address to probe
-	  args[2]	irq number
-	  =======	=========================
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  - EIO		Probe failed.
-
-	notes:
-		This ioctl initializes the addresses and irq for a disk
-		controller, probes for drives, and creates /proc/ide
-		interfaces as appropriate.
-
-
-
-HDIO_UNREGISTER_HWIF
-	unregister interface
-
-
-	usage::
-
-	  int index;
-
-	  ioctl(fd, HDIO_UNREGISTER_HWIF, index);
-
-	inputs:
-		index		index of hardware interface to unregister
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-
-	notes:
-		This ioctl removes a hardware interface from the kernel.
-
-		Currently (2.6.8) this ioctl silently fails if any drive on
-		the interface is busy.
-
-
-
-HDIO_SET_WCACHE
-	change write cache enable-disable
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_WCACHE, val);
-
-	inputs:
-		New value for write cache enable
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_ACOUSTIC
-	change acoustic behavior
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_ACOUSTIC, val);
-
-	inputs:
-		New value for drive acoustic settings
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 254]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_QDMA
-	change use-qdma flag
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_ADDRESS
-	change lba addressing modes
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_ADDRESS, val);
-
-	inputs:
-		New value for addressing mode
-
-	    =   ===================
-	    0   28-bit
-	    1   48-bit
-	    2   48-bit doing 28-bit
-	    =   ===================
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 2]
-	  - EBUSY		Controller busy
-	  - EIO		Drive does not support lba48 mode.
-
-
-HDIO_SET_IDE_SCSI
-	usage::
-
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_IDE_SCSI, val);
-
-	inputs:
-		New value for scsi emulation mode (?)
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_SCSI_IDE
-	Not implemented, as of 2.6.8.1