Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 147 insertions, 0 deletions

diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
new file mode 100644
index 000000000000..ec3d109d787a
--- /dev/null
+++ b/Documentation/networking/tuntap.txt
@@ -0,0 +1,147 @@
+Universal TUN/TAP device driver.
+Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+
+  Linux, Solaris drivers 
+  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+
+  FreeBSD TAP driver 
+  Copyright (c) 1999-2000 Maksim Yevmenkin <m_evmenkin@yahoo.com>
+
+  Revision of this document 2002 by Florian Thiel <florian.thiel@gmx.net>
+
+1. Description
+  TUN/TAP provides packet reception and transmission for user space programs. 
+  It can be seen as a simple Point-to-Point or Ethernet device, which,
+  instead of receiving packets from physical media, receives them from 
+  user space program and instead of sending packets via physical media 
+  writes them to the user space program. 
+
+  In order to use the driver a program has to open /dev/net/tun and issue a
+  corresponding ioctl() to register a network device with the kernel. A network
+  device will appear as tunXX or tapXX, depending on the options chosen. When
+  the program closes the file descriptor, the network device and all
+  corresponding routes will disappear.
+
+  Depending on the type of device chosen the userspace program has to read/write
+  IP packets (with tun) or ethernet frames (with tap). Which one is being used
+  depends on the flags given with the ioctl().
+
+  The package from http://vtun.sourceforge.net/tun contains two simple examples
+  for how to use tun and tap devices. Both programs work like a bridge between
+  two network interfaces.
+  br_select.c - bridge based on select system call.
+  br_sigio.c  - bridge based on async io and SIGIO signal.
+  However, the best example is VTun http://vtun.sourceforge.net :))
+
+2. Configuration 
+  Create device node:
+     mkdir /dev/net (if it doesn't exist already)
+     mknod /dev/net/tun c 10 200
+  
+  Set permissions:
+     e.g. chmod 0700 /dev/net/tun
+     if you want the device only accessible by root. Giving regular users the
+     right to assign network devices is NOT a good idea. Users could assign
+     bogus network interfaces to trick firewalls or administrators.
+
+  Driver module autoloading
+
+     Make sure that "Kernel module loader" - module auto-loading
+     support is enabled in your kernel.  The kernel should load it on
+     first access.
+  
+  Manual loading 
+     insert the module by hand:
+        modprobe tun
+
+  If you do it the latter way, you have to load the module every time you
+  need it, if you do it the other way it will be automatically loaded when
+  /dev/net/tun is being opened.
+
+3. Program interface 
+  3.1 Network device allocation:
+
+  char *dev should be the name of the device with a format string (e.g.
+  "tun%d"), but (as far as I can see) this can be any valid network device name.
+  Note that the character pointer becomes overwritten with the real device name
+  (e.g. "tun0")
+
+  #include <linux/if.h>
+  #include <linux/if_tun.h>
+
+  int tun_alloc(char *dev)
+  {
+      struct ifreq ifr;
+      int fd, err;
+
+      if( (fd = open("/dev/net/tun", O_RDWR)) < 0 )
+         return tun_alloc_old(dev);
+
+      memset(&ifr, 0, sizeof(ifr));
+
+      /* Flags: IFF_TUN   - TUN device (no Ethernet headers) 
+       *        IFF_TAP   - TAP device  
+       *
+       *        IFF_NO_PI - Do not provide packet information  
+       */ 
+      ifr.ifr_flags = IFF_TUN; 
+      if( *dev )
+         strncpy(ifr.ifr_name, dev, IFNAMSIZ);
+
+      if( (err = ioctl(fd, TUNSETIFF, (void *) &ifr)) < 0 ){
+         close(fd);
+         return err;
+      }
+      strcpy(dev, ifr.ifr_name);
+      return fd;
+  }              
+ 
+  3.2 Frame format:
+  If flag IFF_NO_PI is not set each frame format is: 
+     Flags [2 bytes]
+     Proto [2 bytes]
+     Raw protocol(IP, IPv6, etc) frame.
+
+Universal TUN/TAP device driver Frequently Asked Question.
+   
+1. What platforms are supported by TUN/TAP driver ?
+Currently driver has been written for 3 Unices:
+   Linux kernels 2.2.x, 2.4.x 
+   FreeBSD 3.x, 4.x, 5.x
+   Solaris 2.6, 7.0, 8.0
+
+2. What is TUN/TAP driver used for?
+As mentioned above, main purpose of TUN/TAP driver is tunneling. 
+It is used by VTun (http://vtun.sourceforge.net).
+
+Another interesting application using TUN/TAP is pipsecd
+(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec
+implementation that can use complete kernel routing (unlike FreeS/WAN).
+
+3. How does Virtual network device actually work ? 
+Virtual network device can be viewed as a simple Point-to-Point or
+Ethernet device, which instead of receiving packets from a physical 
+media, receives them from user space program and instead of sending 
+packets via physical media sends them to the user space program. 
+
+Let's say that you configured IPX on the tap0, then whenever 
+the kernel sends an IPX packet to tap0, it is passed to the application
+(VTun for example). The application encrypts, compresses and sends it to 
+the other side over TCP or UDP. The application on the other side decompresses
+and decrypts the data received and writes the packet to the TAP device, 
+the kernel handles the packet like it came from real physical device.
+
+4. What is the difference between TUN driver and TAP driver?
+TUN works with IP frames. TAP works with Ethernet frames.
+
+This means that you have to read/write IP packets when you are using tun and
+ethernet frames when using tap.
+
+5. What is the difference between BPF and TUN/TAP driver?
+BFP is an advanced packet filter. It can be attached to existing
+network interface. It does not provide a virtual network interface.
+A TUN/TAP driver does provide a virtual network interface and it is possible
+to attach BPF to this interface.
+
+6. Does TAP driver support kernel Ethernet bridging?
+Yes. Linux and FreeBSD drivers support Ethernet bridging.