[media] doc-rst: improve display of notes and warnings

There are several notes and warning mesages in the middle of
the media docbook. Use the ReST tags for that, as it makes
them visually better and hightlights them.

While here, modify a few ones to make them clearer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

10 files changed, 44 insertions, 42 deletions

diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst
index 1c708c5e6bc0..fcffaa7e1463 100644
--- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst
+++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst
@@ -15,8 +15,9 @@ The information about the frontend tuner locking status can be queried
 using :ref:`FE_READ_STATUS`.
 
 Signal statistics are provided via
-:ref:`FE_GET_PROPERTY`. Please note that several
-statistics require the demodulator to be fully locked (e. g. with
-FE_HAS_LOCK bit set). See
-:ref:`Frontend statistics indicators <frontend-stat-properties>` for
-more details.
+:ref:`FE_GET_PROPERTY`.
+
+.. note:: Most statistics require the demodulator to be fully locked
+   (e. g. with FE_HAS_LOCK bit set). See
+   :ref:`Frontend statistics indicators <frontend-stat-properties>` for
+   more details.
diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst
index 60fb3d46b1d6..6c06147f167c 100644
--- a/Documentation/media/uapi/dvb/dvbapi.rst
+++ b/Documentation/media/uapi/dvb/dvbapi.rst
@@ -8,8 +8,8 @@
 Digital TV API
 ##############
 
-**NOTE:** This API is also known as **DVB API**, although it is generic
-enough to support all digital TV standards.
+.. note:: This API is also known as **DVB API**, although it is generic
+   enough to support all digital TV standards.
 
 **Version 5.10**
 
diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst
index 3c348e585729..cd0511b06c2c 100644
--- a/Documentation/media/uapi/dvb/dvbproperty.rst
+++ b/Documentation/media/uapi/dvb/dvbproperty.rst
@@ -20,13 +20,13 @@ Also, the union didn't have any space left to be expanded without
 breaking userspace. So, the decision was to deprecate the legacy
 union/struct based approach, in favor of a properties set approach.
 
-NOTE: on Linux DVB API version 3, setting a frontend were done via
-:ref:`struct dvb_frontend_parameters <dvb-frontend-parameters>`.
-This got replaced on version 5 (also called "S2API", as this API were
-added originally_enabled to provide support for DVB-S2), because the
-old API has a very limited support to new standards and new hardware.
-This section describes the new and recommended way to set the frontend,
-with suppports all digital TV delivery systems.
+.. note:: On Linux DVB API version 3, setting a frontend were done via
+   :ref:`struct dvb_frontend_parameters <dvb-frontend-parameters>`.
+   This got replaced on version 5 (also called "S2API", as this API were
+   added originally_enabled to provide support for DVB-S2), because the
+   old API has a very limited support to new standards and new hardware.
+   This section describes the new and recommended way to set the frontend,
+   with suppports all digital TV delivery systems.
 
 Example: with the properties based approach, in order to set the tuner
 to a DVB-C channel at 651 kHz, modulated with 256-QAM, FEC 3/4 and
@@ -93,12 +93,12 @@ Example: Setting digital TV frontend properties
 	return 0;
     }
 
-NOTE: While it is possible to directly call the Kernel code like the
-above example, it is strongly recommended to use
-`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it
-provides abstraction to work with the supported digital TV standards and
-provides methods for usual operations like program scanning and to
-read/write channel descriptor files.
+.. attention:: While it is possible to directly call the Kernel code like the
+   above example, it is strongly recommended to use
+   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it
+   provides abstraction to work with the supported digital TV standards and
+   provides methods for usual operations like program scanning and to
+   read/write channel descriptor files.
 
 
 .. toctree::
diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst
index ead3ddf764c0..bf0a8617de92 100644
--- a/Documentation/media/uapi/dvb/examples.rst
+++ b/Documentation/media/uapi/dvb/examples.rst
@@ -9,10 +9,10 @@ Examples
 In this section we would like to present some examples for using the DVB
 API.
 
-NOTE: This section is out of date, and the code below won't even
-compile. Please refer to the
-`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
-updated/recommended examples.
+..note:: This section is out of date, and the code below won't even
+   compile. Please refer to the
+   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
+   updated/recommended examples.
 
 
 .. _tuning:
diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst
index 9f71b39de0c2..d47e9dbf558a 100644
--- a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst
+++ b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst
@@ -36,8 +36,9 @@ Arguments
 Description
 ===========
 
-WARNING: This is a very obscure legacy command, used only at stv0299
-driver. Should not be used on newer drivers.
+.. warning::
+   This is a very obscure legacy command, used only at stv0299
+   driver. Should not be used on newer drivers.
 
 It provides a non-standard method for selecting Diseqc voltage on the
 frontend, for Dish Network legacy switches.
diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst
index 9a9ddbcdb1ec..bb6c32e47ce8 100644
--- a/Documentation/media/uapi/dvb/fe-get-info.rst
+++ b/Documentation/media/uapi/dvb/fe-get-info.rst
@@ -144,8 +144,8 @@ struct dvb_frontend_info
        -  Capabilities supported by the frontend
 
 
-NOTE: The frequencies are specified in Hz for Terrestrial and Cable
-systems. They're specified in kHz for Satellite systems
+.. note:: The frequencies are specified in Hz for Terrestrial and Cable
+   systems. They're specified in kHz for Satellite systems
 
 
 .. _fe-caps-t:
diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst
index 339955fbe133..624ed9d06488 100644
--- a/Documentation/media/uapi/dvb/fe-read-status.rst
+++ b/Documentation/media/uapi/dvb/fe-read-status.rst
@@ -40,9 +40,9 @@ used to check about the locking status of the frontend after being
 tuned. The ioctl takes a pointer to an integer where the status will be
 written.
 
-NOTE: the size of status is actually sizeof(enum fe_status), with
-varies according with the architecture. This needs to be fixed in the
-future.
+.. note:: The size of status is actually sizeof(enum fe_status), with
+   varies according with the architecture. This needs to be fixed in the
+   future.
 
 
 .. _fe-status-t:
diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst
index 763b61d91004..545e2afba2c0 100644
--- a/Documentation/media/uapi/dvb/fe-set-tone.rst
+++ b/Documentation/media/uapi/dvb/fe-set-tone.rst
@@ -42,10 +42,10 @@ to send a 22kHz tone in order to select between high/low band on some
 dual-band LNBf. It is also used to send signals to DiSEqC equipment, but
 this is done using the DiSEqC ioctls.
 
-NOTE: if more than one device is connected to the same antenna, setting
-a tone may interfere on other devices, as they may lose the capability
-of selecting the band. So, it is recommended that applications would
-change to SEC_TONE_OFF when the device is not used.
+.. attention:: If more than one device is connected to the same antenna,
+   setting a tone may interfere on other devices, as they may lose the
+   capability of selecting the band. So, it is recommended that applications
+   would change to SEC_TONE_OFF when the device is not used.
 
 .. _fe-sec-tone-mode-t:
 
diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst
index 517f79bdbb4b..2b19086b660a 100644
--- a/Documentation/media/uapi/dvb/fe-set-voltage.rst
+++ b/Documentation/media/uapi/dvb/fe-set-voltage.rst
@@ -48,11 +48,11 @@ the ones that implement DISEqC and multipoint LNBf's don't need to
 control the voltage level, provided that either 13V or 18V is sent to
 power up the LNBf.
 
-NOTE: if more than one device is connected to the same antenna, setting
-a voltage level may interfere on other devices, as they may lose the
-capability of setting polarization or IF. So, on those cases, setting
-the voltage to SEC_VOLTAGE_OFF while the device is not is used is
-recommended.
+.. attention:: if more than one device is connected to the same antenna,
+   setting a voltage level may interfere on other devices, as they may lose
+   the capability of setting polarization or IF. So, on those cases, setting
+   the voltage to SEC_VOLTAGE_OFF while the device is not is used is
+   recommended.
 
 
 Return Value
diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst
index 8c7e502bff1f..48c5cd487ce7 100644
--- a/Documentation/media/uapi/dvb/frontend.rst
+++ b/Documentation/media/uapi/dvb/frontend.rst
@@ -29,8 +29,8 @@ The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``.
 Data types and ioctl definitions can be accessed by including
 ``linux/dvb/frontend.h`` in your application.
 
-NOTE: Transmission via the internet (DVB-IP) is not yet handled by this
-API but a future extension is possible.
+.. note:: Transmission via the internet (DVB-IP) is not yet handled by this
+   API but a future extension is possible.
 
 On Satellite systems, the API support for the Satellite Equipment
 Control (SEC) allows to power control and to send/receive signals to