diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-29 06:53:01 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-29 06:53:01 +0400 |
| commit | 268943fb7529a15254a5247372119ba4bd735e94 (patch) | |
| tree | 790d42cfade2a35b0eec5e1b7e0ac3795d399bcc /Documentation/leds | |
| parent | 2ad48ee810335bdd99de96e1a0796ba34c0e8301 (diff) | |
| parent | 3cb6f44aedf519dce4a9106dec675b94d675c539 (diff) | |
| download | linux-268943fb7529a15254a5247372119ba4bd735e94.tar.xz | |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem update from Bryan Wu:
"Basically this cycle is mostly cleanup for LED subsystem"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
leds: s3c24xx: Remove hardware.h inclusion
leds: replace list_for_each with list_for_each_entry
leds: kirkwood: Cleanup in header files
leds: pwm: Remove a warning on non-DT platforms
leds: leds-pwm: fix duty time overflow.
leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock
leds: leds-mc13783: Remove duplicate field in platform data
drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base'
leds: lp5523: Support LED MUX configuration on running a pattern
leds: lp5521/5523: Fix multiple engine usage bug
LEDS: tca6507 - fix up some comments.
LEDS: tca6507: add device-tree support for GPIO configuration.
LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
Diffstat (limited to 'Documentation/leds')
| -rw-r--r-- | Documentation/leds/leds-lp55xx.txt | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt index 82713ff92eb3..bcea12a0c584 100644 --- a/Documentation/leds/leds-lp55xx.txt +++ b/Documentation/leds/leds-lp55xx.txt @@ -73,6 +73,10 @@ select_engine : Select which engine is used for running program run_engine : Start program which is loaded via the firmware interface firmware : Load program data +In case of LP5523, one more command is required, 'enginex_leds'. +It is used for selecting LED output(s) at each engine number. +In more details, please refer to 'leds-lp5523.txt'. + For example, run blinking pattern in engine #1 of LP5521 echo 1 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp5521/loading @@ -81,10 +85,12 @@ echo 0 > /sys/class/firmware/lp5521/loading echo 1 > /sys/bus/i2c/devices/xxxx/run_engine For example, run blinking pattern in engine #3 of LP55231 +Two LEDs are configured as pattern output channels. echo 3 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp55231/loading echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data echo 0 > /sys/class/firmware/lp55231/loading +echo "000001100" > /sys/bus/i2c/devices/xxxx/engine3_leds echo 1 > /sys/bus/i2c/devices/xxxx/run_engine To start blinking patterns in engine #2 and #3 simultaneously, @@ -99,17 +105,19 @@ done echo 1 > /sys/class/leds/red/device/run_engine Here is another example for LP5523. +Full LED strings are selected by 'engine2_leds'. echo 2 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp5523/loading echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data echo 0 > /sys/class/firmware/lp5523/loading +echo "111111111" > /sys/bus/i2c/devices/xxxx/engine2_leds echo 1 > /sys/bus/i2c/devices/xxxx/run_engine As soon as 'loading' is set to 0, registered callback is called. Inside the callback, the selected engine is loaded and memory is updated. To run programmed pattern, 'run_engine' attribute should be enabled. -The pattern sqeuence of LP8501 is same as LP5523. +The pattern sqeuence of LP8501 is similar to LP5523. However pattern data is specific. Ex 1) Engine 1 is used echo 1 > /sys/bus/i2c/devices/xxxx/select_engine |