Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/infiniband/sysfs.txt b/Documentation/infiniband/sysfs.txt
new file mode 100644
index 000000000000..ddd519b72ee1
--- /dev/null
+++ b/Documentation/infiniband/sysfs.txt
@@ -0,0 +1,66 @@
+SYSFS FILES
+
+  For each InfiniBand device, the InfiniBand drivers create the
+  following files under /sys/class/infiniband/<device name>:
+
+    node_type      - Node type (CA, switch or router)
+    node_guid      - Node GUID
+    sys_image_guid - System image GUID
+
+  In addition, there is a "ports" subdirectory, with one subdirectory
+  for each port.  For example, if mthca0 is a 2-port HCA, there will
+  be two directories:
+
+    /sys/class/infiniband/mthca0/ports/1
+    /sys/class/infiniband/mthca0/ports/2
+
+  (A switch will only have a single "0" subdirectory for switch port
+  0; no subdirectory is created for normal switch ports)
+
+  In each port subdirectory, the following files are created:
+
+    cap_mask       - Port capability mask
+    lid            - Port LID
+    lid_mask_count - Port LID mask count
+    rate           - Port data rate (active width * active speed)
+    sm_lid         - Subnet manager LID for port's subnet
+    sm_sl          - Subnet manager SL for port's subnet
+    state          - Port state (DOWN, INIT, ARMED, ACTIVE or ACTIVE_DEFER)
+    phys_state     - Port physical state (Sleep, Polling, LinkUp, etc)
+
+  There is also a "counters" subdirectory, with files
+
+    VL15_dropped
+    excessive_buffer_overrun_errors
+    link_downed
+    link_error_recovery
+    local_link_integrity_errors
+    port_rcv_constraint_errors
+    port_rcv_data
+    port_rcv_errors
+    port_rcv_packets
+    port_rcv_remote_physical_errors
+    port_rcv_switch_relay_errors
+    port_xmit_constraint_errors
+    port_xmit_data
+    port_xmit_discards
+    port_xmit_packets
+    symbol_error
+
+  Each of these files contains the corresponding value from the port's
+  Performance Management PortCounters attribute, as described in
+  section 16.1.3.5 of the InfiniBand Architecture Specification.
+
+  The "pkeys" and "gids" subdirectories contain one file for each
+  entry in the port's P_Key or GID table respectively.  For example,
+  ports/1/pkeys/10 contains the value at index 10 in port 1's P_Key
+  table.
+
+MTHCA
+
+  The Mellanox HCA driver also creates the files:
+
+    hw_rev   - Hardware revision number
+    fw_ver   - Firmware version
+    hca_type - HCA type: "MT23108", "MT25208 (MT23108 compat mode)",
+               or "MT25208"