docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 78 deletions

diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052
deleted file mode 100644
index c1c0f1f08904..000000000000
--- a/Documentation/hwmon/da9052
+++ /dev/null
@@ -1,78 +0,0 @@
-Kernel driver da9052
-====================
-
-Supported chips:
-
-  * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
-
-    Prefix: 'da9052'
-
-    Datasheet: Datasheet is not publicly available.
-
-Authors: David Dajun Chen <dchen@diasemi.com>
-
-Description
------------
-
-The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits
-resolution and track and hold circuitry combined with an analogue input
-multiplexer. The analogue input multiplexer will allow conversion of up to 10
-different inputs. The track and hold circuit ensures stable input voltages at
-the input of the ADC during the conversion.
-
-The ADC is used to measure the following inputs:
-
-========= ===================================================================
-Channel 0 VDDOUT - measurement of the system voltage
-Channel 1 ICH - internal battery charger current measurement
-Channel 2 TBAT - output from the battery NTC
-Channel 3 VBAT - measurement of the battery voltage
-Channel 4 ADC_IN4 - high impedance input (0 - 2.5V)
-Channel 5 ADC_IN5 - high impedance input (0 - 2.5V)
-Channel 6 ADC_IN6 - high impedance input (0 - 2.5V)
-Channel 7 XY - TSI interface to measure the X and Y voltage of the touch
-	  screen resistive potentiometers
-Channel 8 Internal Tjunc. - sense (internal temp. sensor)
-Channel 9 VBBAT - measurement of the backup battery voltage
-========= ===================================================================
-
-By using sysfs attributes we can measure the system voltage VDDOUT, the battery
-charging current ICH, battery temperature TBAT, battery junction temperature
-TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
-
-Voltage Monitoring
-------------------
-
-Voltages are sampled by a 10 bit ADC.
-
-The battery voltage is calculated as:
-
-	Milli volt = ((ADC value * 1000) / 512) + 2500
-
-The backup battery voltage is calculated as:
-
-	Milli volt = (ADC value * 2500) / 512;
-
-The voltages on ADC channels 4, 5 and 6 are calculated as:
-
-	Milli volt = (ADC value * 2500) / 1023
-
-Temperature Monitoring
-----------------------
-
-Temperatures are sampled by a 10 bit ADC.  Junction and battery temperatures
-are monitored by the ADC channels.
-
-The junction temperature is calculated:
-
-	Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
-
-The junction temperature attribute is supported by the driver.
-
-The battery temperature is calculated:
-
-	Degree Celsius = 1 / (t1 + 1/298) - 273
-
-where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
-
-Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.