Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

1 files changed, 197 insertions, 0 deletions

diff --git a/Documentation/driver-api/tty/moxa-smartio.rst b/Documentation/driver-api/tty/moxa-smartio.rst
new file mode 100644
index 000000000000..af25bc5cc3e6
--- /dev/null
+++ b/Documentation/driver-api/tty/moxa-smartio.rst
@@ -0,0 +1,197 @@
+=============================================================
+MOXA Smartio/Industio Family Device Driver Installation Guide
+=============================================================
+
+Copyright (C) 2008, Moxa Inc.
+Copyright (C) 2021, Jiri Slaby
+
+.. Content
+
+   1. Introduction
+   2. System Requirement
+   3. Installation
+      3.1 Hardware installation
+      3.2 Device naming convention
+   4. Utilities
+   5. Setserial
+   6. Troubleshooting
+
+1. Introduction
+^^^^^^^^^^^^^^^
+
+   The Smartio/Industio/UPCI family Linux driver supports following multiport
+   boards:
+
+    - 2 ports multiport board
+	CP-102U, CP-102UL, CP-102UF
+	CP-132U-I, CP-132UL,
+	CP-132, CP-132I, CP132S, CP-132IS,
+	(CP-102, CP-102S)
+
+    - 4 ports multiport board
+	CP-104EL,
+	CP-104UL, CP-104JU,
+	CP-134U, CP-134U-I,
+	C104H/PCI, C104HS/PCI,
+	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
+	(C114HI, CT-114I),
+	POS-104UL,
+	CB-114,
+	CB-134I
+
+    - 8 ports multiport board
+	CP-118EL, CP-168EL,
+	CP-118U, CP-168U,
+	C168H/PCI,
+	CB-108
+
+   If a compatibility problem occurs, please contact Moxa at
+   support@moxa.com.tw.
+
+   In addition to device driver, useful utilities are also provided in this
+   version. They are:
+
+    - msdiag
+		 Diagnostic program for displaying installed Moxa
+                 Smartio/Industio boards.
+    - msmon
+		 Monitor program to observe data count and line status signals.
+    - msterm     A simple terminal program which is useful in testing serial
+	         ports.
+
+   All the drivers and utilities are published in form of source code under
+   GNU General Public License in this version. Please refer to GNU General
+   Public License announcement in each source code file for more detail.
+
+   In Moxa's Web sites, you may always find the latest driver at
+   https://www.moxa.com/.
+
+   This version of driver can be installed as a Loadable Module (Module driver)
+   or built-in into kernel (Static driver). Before you install the driver,
+   please refer to hardware installation procedure in the User's Manual.
+
+   We assume the user should be familiar with following documents:
+
+   - Serial-HOWTO
+   - Kernel-HOWTO
+
+2. System Requirement
+^^^^^^^^^^^^^^^^^^^^^
+
+   - Maximum 4 boards can be installed in combination
+
+3. Installation
+^^^^^^^^^^^^^^^
+
+3.1 Hardware installation
+=========================
+
+PCI/UPCI board
+--------------
+
+   You may need to adjust IRQ usage in BIOS to avoid IRQ conflict with other
+   ISA devices. Please refer to hardware installation procedure in User's
+   Manual in advance.
+
+PCI IRQ Sharing
+---------------
+
+   Each port within the same multiport board shares the same IRQ. Up to
+   4 Moxa Smartio/Industio PCI Family multiport boards can be installed
+   together on one system and they can share the same IRQ.
+
+
+
+3.2 Device naming convention
+============================
+
+   The device node is named "ttyMxx".
+
+Device naming when more than 2 boards installed
+-----------------------------------------------
+
+   Naming convention for each Smartio/Industio multiport board is
+   pre-defined as below.
+
+   ============ ===============
+   Board Num.	Device node
+   1st board	ttyM0  - ttyM7
+   2nd board	ttyM8  - ttyM15
+   3rd board	ttyM16 - ttyM23
+   4th board	ttyM24 - ttyM31
+   ============ ===============
+
+4. Utilities
+^^^^^^^^^^^^
+
+   There are 3 utilities contained in this driver. They are msdiag, msmon and
+   msterm. These 3 utilities are released in form of source code. They should
+   be compiled into executable file and copied into /usr/bin.
+
+msdiag - Diagnostic
+===================
+
+   This utility provides the function to display what Moxa Smartio/Industio
+   board was found by the driver in the system.
+
+msmon - Port Monitoring
+=======================
+
+   This utility gives the user a quick view about all the MOXA ports'
+   activities. One can easily learn each port's total received/transmitted
+   (Rx/Tx) character count since the time when the monitoring is started.
+
+   Rx/Tx throughputs per second are also reported in interval basis (e.g.
+   the last 5 seconds) and in average basis (since the time the monitoring
+   is started). You can reset all ports' count by <HOME> key. <+> <->
+   (plus/minus) keys to change the displaying time interval. Press <ENTER>
+   on the port, that cursor stay, to view the port's communication
+   parameters, signal status, and input/output queue.
+
+msterm - Terminal Emulation
+===========================
+
+   This utility provides data sending and receiving ability of all tty ports,
+   especially for MOXA ports. It is quite useful for testing simple
+   application, for example, sending AT command to a modem connected to the
+   port or used as a terminal for login purpose. Note that this is only a
+   dumb terminal emulation without handling full screen operation.
+
+5. Setserial
+^^^^^^^^^^^^
+
+   Supported Setserial parameters are listed as below.
+
+   ============== =============================================================
+   uart		  set UART type(16450 --> disable FIFO, 16550A --> enable FIFO)
+   close_delay	  set the amount of time (in 1/100 of a second) that DTR
+		  should be kept low while being closed.
+   closing_wait   set the amount of time (in 1/100 of a second) that the
+		  serial port should wait for data to be drained while
+		  being closed, before the receiver is disabled.
+   spd_hi	  Use 57.6kb when the application requests 38.4kb.
+   spd_vhi	  Use 115.2kb when the application requests 38.4kb.
+   spd_shi	  Use 230.4kb when the application requests 38.4kb.
+   spd_warp	  Use 460.8kb when the application requests 38.4kb.
+   spd_normal	  Use 38.4kb when the application requests 38.4kb.
+   spd_cust	  Use the custom divisor to set the speed when the
+		  application requests 38.4kb.
+   divisor	  This option sets the custom division.
+   baud_base	  This option sets the base baud rate.
+   ============== =============================================================
+
+6. Troubleshooting
+^^^^^^^^^^^^^^^^^^
+
+   The boot time error messages and solutions are stated as clearly as
+   possible. If all the possible solutions fail, please contact our technical
+   support team to get more help.
+
+
+   Error msg:
+	      More than 4 Moxa Smartio/Industio family boards found. Fifth board
+              and after are ignored.
+
+   Solution:
+   To avoid this problem, please unplug fifth and after board, because Moxa
+   driver supports up to 4 boards.