Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Cannonlake and Vega12 support are probably the two major things. This
  pull lacks nouveau, Ben had some unforseen leave and a few other
  blockers so we'll see how things look or maybe leave it for this merge
  window.

  core:
   - Device links to handle sound/gpu pm dependency
   - Color encoding/range properties
   - Plane clipping into plane check helper
   - Backlight helpers
   - DP TP4 + HBR3 helper support

  amdgpu:
   - Vega12 support
   - Enable DC by default on all supported GPUs
   - Powerplay restructuring and cleanup
   - DC bandwidth calc updates
   - DC backlight on pre-DCE11
   - TTM backing store dropping support
   - SR-IOV fixes
   - Adding "wattman" like functionality
   - DC crc support
   - Improved DC dual-link handling

  amdkfd:
   - GPUVM support for dGPU
   - KFD events for dGPU
   - Enable PCIe atomics for dGPUs
   - HSA process eviction support
   - Live-lock fixes for process eviction
   - VM page table allocation fix for large-bar systems

  panel:
   - Raydium RM68200
   - AUO G104SN02 V2
   - KEO TX31D200VM0BAA
   - ARM Versatile panels

  i915:
   - Cannonlake support enabled
   - AUX-F port support added
   - Icelake base enabling until internal milestone of forcewake support
   - Query uAPI interface (used for GPU topology information currently)
   - Compressed framebuffer support for sprites
   - kmem cache shrinking when GPU is idle
   - Avoid boosting GPU when waited item is being processed already
   - Avoid retraining LSPCON link unnecessarily
   - Decrease request signaling latency
   - Deprecation of I915_SET_COLORKEY_NONE
   - Kerneldoc and compiler warning cleanup for upcoming CI enforcements
   - Full range ycbcr toggling
   - HDCP support

  i915/gvt:
   - Big refactor for shadow ppgtt
   - KBL context save/restore via LRI cmd (Weinan)
   - Properly unmap dma for guest page (Changbin)

  vmwgfx:
   - Lots of various improvements

  etnaviv:
   - Use the drm gpu scheduler
   - prep work for GC7000L support

  vc4:
   - fix alpha blending
   - Expose perf counters to userspace

  pl111:
   - Bandwidth checking/limiting
   - Versatile panel support

  sun4i:
   - A83T HDMI support
   - A80 support
   - YUV plane support
   - H3/H5 HDMI support

  omapdrm:
   - HPD support for DVI connector
   - remove lots of static variables

  msm:
   - DSI updates from 10nm / SDM845
   - fix for race condition with a3xx/a4xx fence completion irq
   - some refactoring/prep work for eventual a6xx support (ie. when we
     have a userspace)
   - a5xx debugfs enhancements
   - some mdp5 fixes/cleanups to prepare for eventually merging
     writeback
   - support (ie. when we have a userspace)

  tegra:
   - mmap() fixes for fbdev devices
   - Overlay plane for hw cursor fix
   - dma-buf cache maintenance support

  mali-dp:
   - YUV->RGB conversion support

  rockchip:
   - rk3399/chromebook fixes and improvements

  rcar-du:
   - LVDS support move to drm bridge
   - DT bindings for R8A77995
   - Driver/DT support for R8A77970

  tilcdc:
   - DRM panel support"

* tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits)
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm: Fix uabi regression by allowing garbage mode->type from userspace
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/vmwgfx: Bump version patchlevel and date
  drm/vmwgfx: use monotonic event timestamps
  drm/vmwgfx: Unpin the screen object backup buffer when not used
  drm/vmwgfx: Stricter count of legacy surface device resources
  ...

18 files changed, 383 insertions, 63 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
new file mode 100644
index 000000000000..4f0ab3ed3b6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -0,0 +1,58 @@
+Renesas R-Car LVDS Encoder
+==========================
+
+These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+Gen2, R-Car Gen3 and RZ/G SoCs.
+
+Required properties:
+
+- compatible : Shall contain one of
+  - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+  - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
+  - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
+  - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
+  - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
+  - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+  - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
+  - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
+
+- reg: Base address and length for the memory-mapped registers
+- clocks: A phandle + clock-specifier pair for the functional clock
+- resets: A phandle + reset specifier for the module reset
+
+Required nodes:
+
+The LVDS encoder has two video ports. Their connections are modelled using the
+OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 corresponds to the parallel RGB input
+- Video port 1 corresponds to the LVDS output
+
+Each port shall have a single endpoint.
+
+
+Example:
+
+	lvds0: lvds@feb90000 {
+		compatible = "renesas,r8a7790-lvds";
+		reg = <0 0xfeb90000 0 0x1c>;
+		clocks = <&cpg CPG_MOD 726>;
+		resets = <&cpg 726>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds0_in: endpoint {
+					remote-endpoint = <&du_out_lvds0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds0_out: endpoint {
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
index 6ec1a880ac18..df3d7c1ac09e 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt
@@ -1,11 +1,16 @@
-THS8135 Video DAC
------------------
+THS8134 and THS8135 Video DAC
+-----------------------------
 
-This is the binding for Texas Instruments THS8135 Video DAC bridge.
+This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and
+THS8135 Video DAC bridges.
 
 Required properties:
 
-- compatible: Must be "ti,ths8135"
+- compatible: Must be one of
+  "ti,ths8134"
+  "ti,ths8134a," "ti,ths8134"
+  "ti,ths8134b", "ti,ths8134"
+  "ti,ths8135"
 
 Required nodes:
 
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
index fc53f7c60bc6..207e42e9eba0 100644
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
@@ -10,6 +10,7 @@ Optional properties:
 - analog: the connector has DVI analog pins
 - digital: the connector has DVI digital pins
 - dual-link: the connector has pins for DVI dual-link
+- hpd-gpios: HPD GPIO number
 
 Required nodes:
 - Video port for DVI input
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
index 05176f1ae108..8def11b16a24 100644
--- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -1,23 +1,3 @@
-Etnaviv DRM master device
-=========================
-
-The Etnaviv DRM master device is a virtual device needed to list all
-Vivante GPU cores that comprise the GPU subsystem.
-
-Required properties:
-- compatible: Should be one of
-    "fsl,imx-gpu-subsystem"
-    "marvell,dove-gpu-subsystem"
-- cores: Should contain a list of phandles pointing to Vivante GPU devices
-
-example:
-
-gpu-subsystem {
-	compatible = "fsl,imx-gpu-subsystem";
-	cores = <&gpu_2d>, <&gpu_3d>;
-};
-
-
 Vivante GPU core devices
 ========================
 
@@ -32,7 +12,9 @@ Required properties:
 - clocks: should contain one clock for entry in clock-names
   see Documentation/devicetree/bindings/clock/clock-bindings.txt
 - clock-names:
-   - "bus":    AXI/register clock
+   - "bus":    AXI/master interface clock
+   - "reg":    AHB/slave interface clock
+               (only required if GPU can gate slave interface independently)
    - "core":   GPU core clock
    - "shader": Shader clock (only required if GPU has feature PIPE_3D)
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index a6671bd2c85a..518e9cdf0d4b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -7,8 +7,6 @@ Required properties:
 - reg: Physical base address and length of the registers of controller
 - reg-names: The names of register regions. The following regions are required:
   * "dsi_ctrl"
-- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
-  be 0 or 1, since we have 2 DSI controllers at most for now.
 - interrupts: The interrupt signal from the DSI block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
@@ -22,6 +20,8 @@ Required properties:
   * "core"
   For DSIv2, we need an additional clock:
    * "src"
+  For DSI6G v2.0 onwards, we need also need the clock:
+   * "byte_intf"
 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
   by a DSI PHY block. See [1] for details on clock bindings.
@@ -88,21 +88,35 @@ Required properties:
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
-- reg: Physical base address and length of the registers of PLL, PHY and PHY
-  regulator
+  * "qcom,dsi-phy-14nm"
+  * "qcom,dsi-phy-10nm"
+- reg: Physical base address and length of the registers of PLL, PHY. Some
+  revisions require the PHY regulator base address, whereas others require the
+  PHY lane base address. See below for each PHY revision.
 - reg-names: The names of register regions. The following regions are required:
+  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
+  For DSI 14nm and 10nm PHYs:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_lane"
 - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
   2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
-  be 0 or 1, since we have 2 DSI PHYs at most for now.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks. See [1] for details on clock bindings.
 - clock-names: the following clocks are required:
   * "iface"
+  For 28nm HPM/LP, 28nm 8960 PHYs:
+- vddio-supply: phandle to vdd-io regulator device node
+  For 20nm PHY:
 - vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
+  For 14nm PHY:
+- vcca-supply: phandle to vcca regulator device node
+  For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
 
 Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
new file mode 100644
index 000000000000..248141c3c7e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt
@@ -0,0 +1,31 @@
+ARM Versatile TFT Panels
+
+These panels are connected to the daughterboards found on the
+ARM Versatile reference designs.
+
+This device node must appear as a child to a "syscon"-compatible
+node.
+
+Required properties:
+- compatible: should be "arm,versatile-tft-panel"
+
+Required subnodes:
+- port: see display/panel/panel-common.txt, graph.txt
+
+
+Example:
+
+sysreg@0 {
+	compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+	reg = <0x00000 0x1000>;
+
+	panel: display@0 {
+		compatible = "arm,versatile-tft-panel";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&foo>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
new file mode 100644
index 000000000000..85626edf63e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g104sn02"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
index 58fa3e48481d..78222ced1874 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
+++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -80,6 +80,11 @@ The parameters are defined as:
   |          |        v                            |          |       |
   +----------+-------------------------------------+----------+-------+
 
+Note: In addition to being used as subnode(s) of display-timings, the timing
+      subnode may also be used on its own. This is appropriate if only one mode
+      need be conveyed. In this case, the node should be named 'panel-timing'.
+
+
 Example:
 
 	display-timings {
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
new file mode 100644
index 000000000000..6a036ede3e28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
@@ -0,0 +1,25 @@
+Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "koe,tx31d200vm0baa"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
index 6862028e7b2e..203b03eefb68 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -9,6 +9,7 @@ Required properties:
 
 Optional properties:
   - reset-gpios: a GPIO spec for the reset pin (active low).
+  - power-supply: phandle of the regulator that provides the supply voltage.
 
 Example:
 &dsi {
@@ -17,5 +18,6 @@ Example:
 		compatible = "orisetech,otm8009a";
 		reg = <0>;
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&v1v8>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
new file mode 100644
index 000000000000..cbb79ef3bfc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
@@ -0,0 +1,25 @@
+Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+panel connected using a MIPI-DSI video interface.
+
+Required properties:
+  - compatible: "raydium,rm68200"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+  - power-supply: phandle of the regulator that provides the supply voltage.
+  - backlight: phandle of the backlight device attached to the panel.
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		power-supply = <&v1v8>;
+		backlight = <&pwm_backlight>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index 16d8ff088b7d..45a457ad38f0 100644
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -1,4 +1,8 @@
 Simple display panel
+====================
+
+panel node
+----------
 
 Required properties:
 - power-supply: See panel-common.txt
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index cd48aba3bc8c..c9cd17f99702 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,13 +13,10 @@ Required Properties:
     - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
     - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
     - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+    - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
+    - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
 
-  - reg: A list of base address and length of each memory resource, one for
-    each entry in the reg-names property.
-  - reg-names: Name of the memory resources. The DU requires one memory
-    resource for the DU core (named "du") and one memory resource for each
-    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
-    index).
+  - reg: the memory-mapped I/O registers base address and length
 
   - interrupt-parent: phandle of the parent interrupt controller.
   - interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +26,13 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - All other DU instances use one functional clock per channel and one
-      clock per LVDS encoder (if available). The functional clocks must be
-      named "du.x" with "x" being the channel numerical index. The LVDS clocks
-      must be named "lvds.x" with "x" being the LVDS encoder numerical index.
-    - In addition to the functional and encoder clocks, all DU versions also
-      support externally supplied pixel clocks. Those clocks are optional.
-      When supplied they must be named "dclkin.x" with "x" being the input
-      clock numerical index.
+    - All other DU instances use one functional clock per channel The
+      functional clocks must be named "du.x" with "x" being the channel
+      numerical index.
+    - In addition to the functional clocks, all DU versions also support
+      externally supplied pixel clocks. Those clocks are optional. When
+      supplied they must be named "dclkin.x" with "x" being the input clock
+      numerical index.
 
   - vsps: A list of phandle and channel index tuples to the VSPs that handle
     the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -63,15 +59,15 @@ corresponding to each DU output.
  R8A7794 (R-Car E2)   DPAD 0         DPAD 1         -              -
  R8A7795 (R-Car H3)   DPAD 0         HDMI 0         HDMI 1         LVDS 0
  R8A7796 (R-Car M3-W) DPAD 0         HDMI 0         LVDS 0         -
+ R8A77970 (R-Car V3M) DPAD 0         LVDS 0         -              -
+ R8A77995 (R-Car D3)  DPAD 0         LVDS 0         LVDS 1         -
 
 
 Example: R8A7795 (R-Car H3) ES2.0 DU
 
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7795";
-		reg = <0 0xfeb00000 0 0x80000>,
-		      <0 0xfeb90000 0 0x14>;
-		reg-names = "du", "lvds.0";
+		reg = <0 0xfeb00000 0 0x80000>;
 		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -79,9 +75,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 		clocks = <&cpg CPG_MOD 724>,
 			 <&cpg CPG_MOD 723>,
 			 <&cpg CPG_MOD 722>,
-			 <&cpg CPG_MOD 721>,
-			 <&cpg CPG_MOD 727>;
-		clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			 <&cpg CPG_MOD 721>;
+		clock-names = "du.0", "du.1", "du.2", "du.3";
 		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 000000000000..8df7d2e393d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+	       Required elements: "core-clk" "pclk" "spdif" "grf"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string of reset names
+		Required elements: "apb", "core", "dptx", "spdif"
+- power-domains : power-domain property defined with a phandle
+		  to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+	 Documentation/devicetree/bindings/media/video-interfaces.txt.
+	 contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		assigned-clocks = <&cru SCLK_DP_CORE>;
+		assigned-clock-rates = <100000000>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>;
+		reset-names = "spdif";
+		extcon = <&fusb0>, <&fusb1>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 029252253ad4..3eb1b48b47dd 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -98,7 +98,7 @@ Example 2: DSI panel
 			compatible = "st,stm32-dsi";
 			reg = <0x40016c00 0x800>;
 			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
-			clock-names = "ref", "pclk";
+			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
 
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index cd626ee1147a..3346c1e2a7a0 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -64,6 +64,56 @@ Required properties:
     first port should be the input endpoint. The second should be the
     output, usually to an HDMI connector.
 
+DWC HDMI TX Encoder
+-------------------
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
+Required properties:
+
+  - compatible: value must be one of:
+    * "allwinner,sun8i-a83t-dw-hdmi"
+  - reg: base address and size of memory-mapped region
+  - reg-io-width: See dw_hdmi.txt. Shall be 1.
+  - interrupts: HDMI interrupt number
+  - clocks: phandles to the clocks feeding the HDMI encoder
+    * iahb: the HDMI bus clock
+    * isfr: the HDMI register clock
+    * tmds: TMDS clock
+  - clock-names: the clock names mentioned above
+  - resets: phandle to the reset controller
+  - reset-names: must be "ctrl"
+  - phys: phandle to the DWC HDMI PHY
+  - phy-names: must be "phy"
+
+  - ports: A ports node with endpoint definitions as defined in
+    Documentation/devicetree/bindings/media/video-interfaces.txt. The
+    first port should be the input endpoint. The second should be the
+    output, usually to an HDMI connector.
+
+DWC HDMI PHY
+------------
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun8i-a83t-hdmi-phy
+    * allwinner,sun8i-h3-hdmi-phy
+  - reg: base address and size of memory-mapped region
+  - clocks: phandles to the clocks feeding the HDMI PHY
+    * bus: the HDMI PHY interface clock
+    * mod: the HDMI PHY module clock
+  - clock-names: the clock names mentioned above
+  - resets: phandle to the reset controller driving the PHY
+  - reset-names: must be "phy"
+
+H3 HDMI PHY requires additional clock:
+  - pll-0: parent of phy clock
+
 TV Encoder
 ----------
 
@@ -94,24 +144,29 @@ Required properties:
    * allwinner,sun7i-a20-tcon
    * allwinner,sun8i-a33-tcon
    * allwinner,sun8i-a83t-tcon-lcd
+   * allwinner,sun8i-a83t-tcon-tv
    * allwinner,sun8i-v3s-tcon
+   * allwinner,sun9i-a80-tcon-lcd
+   * allwinner,sun9i-a80-tcon-tv
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the TCON. Three are needed:
+ - clocks: phandles to the clocks feeding the TCON.
    - 'ahb': the interface clocks
-   - 'tcon-ch0': The clock driving the TCON channel 0
+   - 'tcon-ch0': The clock driving the TCON channel 0, if supported
  - resets: phandles to the reset controllers driving the encoder
-   - "lcd": the reset line for the TCON channel 0
+   - "lcd": the reset line for the TCON
+   - "edp": the reset line for the eDP block (A80 only)
 
  - clock-names: the clock names mentioned above
  - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created
+ - clock-output-names: Name of the pixel clock created, if TCON supports
+   channel 0.
 
 - ports: A ports node with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoint, the second one the output
 
-  The output may have multiple endpoints. The TCON has two channels,
+  The output may have multiple endpoints. TCON can have 1 or 2 channels,
   usually with the first channel being used for the panels interfaces
   (RGB, LVDS, etc.), and the second being used for the outputs that
   require another controller (TV Encoder, HDMI, etc.). The endpoints
@@ -119,11 +174,13 @@ Required properties:
   channel the endpoint is associated to. If that property is not
   present, the endpoint number will be used as the channel number.
 
-On SoCs other than the A33 and V3s, there is one more clock required:
+For TCONs with channel 0, there is one more clock required:
+   - 'tcon-ch0': The clock driving the TCON channel 0
+For TCONs with channel 1, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
-On SoCs that support LVDS (all SoCs but the A13, H3, H5 and V3s), you
-need one more reset line:
+When TCON support LVDS (all TCONs except TV TCON on A83T and those found
+in A13, H3, H5 and V3s SoCs), you need one more reset line:
    - 'lvds': The reset line driving the LVDS logic
 
 And on the A23, A31, A31s and A33, you need one more clock line:
@@ -134,7 +191,7 @@ DRC
 ---
 
 The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
-(A31, A23, A33), allows to dynamically adjust pixel
+(A31, A23, A33, A80), allows to dynamically adjust pixel
 brightness/contrast based on histogram measurements for LCD content
 adaptive backlight control.
 
@@ -144,6 +201,7 @@ Required properties:
     * allwinner,sun6i-a31-drc
     * allwinner,sun6i-a31s-drc
     * allwinner,sun8i-a33-drc
+    * allwinner,sun9i-a80-drc
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the DRC
@@ -170,6 +228,7 @@ Required properties:
     * allwinner,sun6i-a31-display-backend
     * allwinner,sun7i-a20-display-backend
     * allwinner,sun8i-a33-display-backend
+    * allwinner,sun9i-a80-display-backend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the frontend and backend
@@ -191,6 +250,28 @@ On the A33, some additional properties are required:
   - resets and reset-names need to have a phandle to the SAT bus
     resets, whose name will be "sat"
 
+DEU
+---
+
+The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+can sharpen the display content in both luma and chroma channels.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun9i-a80-deu
+  - reg: base address and size of the memory-mapped region.
+  - interrupts: interrupt associated to this IP
+  - clocks: phandles to the clocks feeding the DEU
+    * ahb: the DEU interface clock
+    * mod: the DEU module clock
+    * ram: the DEU DRAM clock
+  - clock-names: the clock names mentioned above
+  - resets: phandles to the reset line driving the DEU
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoints, the second one the outputs
+
 Display Engine Frontend
 -----------------------
 
@@ -204,6 +285,7 @@ Required properties:
     * allwinner,sun6i-a31-display-frontend
     * allwinner,sun7i-a20-display-frontend
     * allwinner,sun8i-a33-display-frontend
+    * allwinner,sun9i-a80-display-frontend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the frontend and backend
@@ -226,6 +308,8 @@ supported.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-a83t-de2-mixer-0
+    * allwinner,sun8i-a83t-de2-mixer-1
+    * allwinner,sun8i-h3-de2-mixer-0
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
@@ -256,7 +340,9 @@ Required properties:
     * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
     * allwinner,sun8i-a83t-display-engine
+    * allwinner,sun8i-h3-display-engine
     * allwinner,sun8i-v3s-display-engine
+    * allwinner,sun9i-a80-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
     frontends (DE 1.0) or mixers (DE 2.0) available.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ae850d6c0ad3..12e8b3e576b0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -104,6 +104,7 @@ eeti	eGalax_eMPIA Technology Inc
 elan	Elan Microelectronic Corp.
 embest	Shenzhen Embest Technology Co., Ltd.
 emmicro	EM Microelectronic
+emtrion	emtrion GmbH
 energymicro	Silicon Laboratories (formerly Energy Micro AS)
 engicam	Engicam S.r.l.
 epcos	EPCOS AG
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index c4aa0adf13ec..5175a24d387e 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -87,8 +87,8 @@ Overlay in-kernel API
 
 The API is quite easy to use.
 
-1. Call of_overlay_apply() to create and apply an overlay changeset. The return
-value is an error or a cookie identifying this overlay.
+1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+return value is an error or a cookie identifying this overlay.
 
 2. Call of_overlay_remove() to remove and cleanup the overlay changeset
 previously created via the call to of_overlay_apply(). Removal of an overlay