Merge tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for MediaTek MT6370 LED Indicator
   - Add support for MediaTek MT6370 Flashlight
   - Add support for QCOM PMIC Flash
   - Add support for Rohm BD2606MVV Charge Pump LED

  New Device Support:
   - Add support for PMK8550 PWM to QCOM LPG

  New Functionality:
   - Add support for high resolution PWM to QCOM LPG

  Fix-ups:
   - Kconfig 'depends' and 'select' dependency changes
   - Remove unused / irrelevant includes
   - Remove unnecessary checks (already performed further into the call stack)
   - Trivial: Fix commentary, simplify error messages
   - Rid 'defined but not used' warnings
   - Provide documentation
   - Explicitly provide include files

  Bug Fixes:
   - Mark GPIO LED as BROKEN
   - Fix Kconfig entries
   - Fix various Smatch staticify reports
   - Fix error handling (or a lack there of)"

* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: leds: Add ROHM BD2606MVV LED
  docs: leds: ledtrig-oneshot: Fix spelling mistake
  leds: pwm-multicolor: Simplify an error message
  dt-bindings: leds: Convert PCA9532 to dtschema
  leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
  leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
  leds: tca6507: Fix error handling of using fwnode_property_read_string
  leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
  leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
  MAINTAINERS: Add entry for LED devices documentation
  Documentation: leds: MT6370: Use bullet lists for timing variables
  Documentation: leds: mt6370: Properly wrap hw_pattern chart
  Documentation: leds: Add MT6370 doc to the toctree
  leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
  docs: leds: Add MT6370 RGB LED pattern document
  leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
  ...

6 files changed, 321 insertions, 52 deletions

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 15e3f6645682..11aedf1650a1 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -90,22 +90,51 @@ properties:
           - heartbeat
             # LED indicates disk activity
           - disk-activity
+            # LED indicates disk read activity
           - disk-read
+            # LED indicates disk write activity
           - disk-write
             # LED flashes at a fixed, configurable rate
           - timer
             # LED alters the brightness for the specified duration with one software
             # timer (requires "led-pattern" property)
           - pattern
+            # LED indicates mic mute state
+          - audio-micmute
+            # LED indicates audio mute state
+          - audio-mute
+            # LED indicates bluetooth power state
+          - bluetooth-power
+            # LED indicates activity of all CPUs
+          - cpu
+            # LED indicates camera flash state
+          - flash
+            # LED indicated keyboard capslock
+          - kbd-capslock
+            # LED indicates MTD memory activity
+          - mtd
+            # LED indicates NAND memory activity (deprecated),
+            # in new implementations use "mtd"
+          - nand-disk
+            # No trigger assigned to the LED. This is the default mode
+            # if trigger is absent
+          - none
+            # LED indicates camera torch state
+          - torch
+            # LED indicates USB gadget activity
           - usb-gadget
+            # LED indicates USB host activity
           - usb-host
+            # LED indicates USB port state
+          - usbport
+        # LED is triggered by CPU activity
       - pattern: "^cpu[0-9]*$"
-      - pattern: "^hci[0-9]+-power$"
         # LED is triggered by Bluetooth activity
-      - pattern: "^mmc[0-9]+$"
+      - pattern: "^hci[0-9]+-power$"
         # LED is triggered by SD/MMC activity
-      - pattern: "^phy[0-9]+tx$"
+      - pattern: "^mmc[0-9]+$"
         # LED is triggered by WLAN activity
+      - pattern: "^phy[0-9]+tx$"
 
   led-pattern:
     description: |
diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
deleted file mode 100644
index f769c52e3643..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-*NXP - pca9532 PWM LED Driver
-
-The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
-The PWM support 256 steps.
-
-Required properties:
-	- compatible:
-		"nxp,pca9530"
-		"nxp,pca9531"
-		"nxp,pca9532"
-		"nxp,pca9533"
-	- reg -  I2C slave address
-
-Each led is represented as a sub-node of the nxp,pca9530.
-
-Optional sub-node properties:
-	- label: see Documentation/devicetree/bindings/leds/common.txt
-	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
-	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-	- default-state: see Documentation/devicetree/bindings/leds/common.txt
-	  This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
-
-Example:
-  #include <dt-bindings/leds/leds-pca9532.h>
-
-  leds: pca9530@60 {
-    compatible = "nxp,pca9530";
-    reg = <0x60>;
-
-    red-power {
-      label = "pca:red:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    green-power {
-      label = "pca:green:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    kernel-booting {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "on";
-    };
-    sys-stat {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "keep"; // don't touch, was set by U-Boot
-    };
-  };
-
-For more product information please see the link below:
-http://nxp.com/documents/data_sheet/PCA9532.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index 1df837798249..6295c91f43e8 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -27,6 +27,7 @@ properties:
       - qcom,pmc8180c-lpg
       - qcom,pmi8994-lpg
       - qcom,pmi8998-lpg
+      - qcom,pmk8550-pwm
 
   "#pwm-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
new file mode 100644
index 000000000000..edf6f55df685
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca953x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9532 LED Dimmer
+
+maintainers:
+  - Riku Voipio <riku.voipio@iki.fi>
+
+description: |
+  The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+  The PWM support 256 steps.
+
+  For more product information please see the link below:
+    https://www.nxp.com/docs/en/data-sheet/PCA9532.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9530
+      - nxp,pca9531
+      - nxp,pca9532
+      - nxp,pca9533
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  "^led-[0-9a-z]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      type:
+        description: |
+          Output configuration, see include/dt-bindings/leds/leds-pca9532.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+        minimum: 0
+        maximum: 4
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/leds-pca9532.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9533";
+            reg = <0x62>;
+
+            led-1 {
+                label = "pca:red:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-2 {
+                label = "pca:green:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-3 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "on";
+            };
+
+            led-4 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "keep";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
new file mode 100644
index 000000000000..ffacf703d9f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED device inside Qualcomm Technologies, Inc. PMICs
+
+maintainers:
+  - Fenglin Wu <quic_fenglinw@quicinc.com>
+
+description: |
+  Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs.
+  The flash LED module can have different number of LED channels supported
+  e.g. 3 or 4. There are some different registers between them but they can
+  both support maximum current up to 1.5 A per channel and they can also support
+  ganging 2 channels together to supply maximum current up to 2 A. The current
+  will be split symmetrically on each channel and they will be enabled and
+  disabled at the same time.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150l-flash-led
+          - qcom,pm8150c-flash-led
+          - qcom,pm8150l-flash-led
+          - qcom,pm8350c-flash-led
+      - const: qcom,spmi-flash-led
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^led-[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the physical LED components which are connected to the
+      flash LED channels' output.
+
+    properties:
+      led-sources:
+        description:
+          The HW indices of the flash LED channels that connect to the
+          physical LED
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2, 3, 4]
+
+      led-max-microamp:
+        anyOf:
+          - minimum: 5000
+            maximum: 500000
+            multipleOf: 5000
+          - minimum: 10000
+            maximum: 1000000
+            multipleOf: 10000
+
+      flash-max-microamp:
+        anyOf:
+          - minimum: 12500
+            maximum: 1500000
+            multipleOf: 12500
+          - minimum: 25000
+            maximum: 2000000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        minimum: 10000
+        maximum: 1280000
+        multipleOf: 10000
+
+    required:
+      - led-sources
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        led-controller@ee00 {
+            compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
+            reg = <0xee00>;
+
+            led-0 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <1>, <4>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <0>;
+            };
+
+            led-1 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_YELLOW>;
+                led-sources = <2>, <3>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 000000000000..14700a2e5fea
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD2606MVV LED controller
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The BD2606 MVV is a programmable LED controller connected via I2C that can
+  drive 6 separate lines. Each of them can be individually switched on and off,
+  but the brightness setting is shared between pairs of them.
+
+  Datasheet is available at
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bd2606mvv
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@66 {
+            compatible = "rohm,bd2606mvv";
+            reg = <0x66>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...