summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2012-07-18 01:06:32 +0400
committerArnd Bergmann <arnd@arndb.de>2012-07-18 01:06:32 +0400
commitfeb7b8d6d2b2eedbca5a55b5dc74d9d967c91151 (patch)
treeed2bae5b1a496471924792608ddbaa2ff942812d /Documentation/devicetree
parent6a1d02d861a35295db8b57fe4cd400bde7c8bd92 (diff)
parent79989ba3e201f3bf992e600a0745ecaf256f08f5 (diff)
downloadlinux-feb7b8d6d2b2eedbca5a55b5dc74d9d967c91151.tar.xz
Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim <kgene.kim@samsung.com>: It is for supporting spi dt for exynos4210 and exynos5250, and got the ack from Grant Likely for spi driver. Note: Since this is including spi driver changes, so it was made based on next/devel-dma-ops which touches same file, Samsung spi driver for avoiding bad conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controller spi: s3c64xx: add device tree support spi: s3c64xx: Remove the 'set_level' callback from controller data ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata function ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functions spi: s3c64xx: move controller information into driver data spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookup Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/spi/spi-samsung.txt113
1 files changed, 113 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
new file mode 100644
index 000000000000..59bfc4f9feb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -0,0 +1,113 @@
+* Samsung SPI Controller
+
+The Samsung SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required SoC Specific Properties:
+
+- compatible: should be one of the following.
+ - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
+ - samsung,s3c6410-spi: for s3c6410 platforms
+ - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
+ - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
+ - samsung,exynos4210-spi: for exynos4 and exynos5 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+
+- tx-dma-channel: The dma channel specifier for tx operations. The format of
+ the dma specifier depends on the dma controller.
+
+- rx-dma-channel: The dma channel specifier for rx operations. The format of
+ the dma specifier depends on the dma controller.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
+ order specified). The format of the gpio specifier depends on the gpio
+ controller.
+
+Optional Board Specific Properties:
+
+- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
+ select the clock source for the spi bus clock, this property can be used to
+ indicate the clock to be used for driving the spi bus clock. If not specified,
+ the clock number 0 is used as default.
+
+- num-cs: Specifies the number of chip select lines supported. If
+ not specified, the default number of chip select lines is set to 1.
+
+SPI Controller specific data in SPI slave nodes:
+
+- The spi slave nodes should provide the following information which is required
+ by the spi controller.
+
+ - cs-gpio: A gpio specifier that specifies the gpio line used as
+ the slave select line by the spi controller. The format of the gpio
+ specifier depends on the gpio controller.
+
+ - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
+ miso line (to account for any lag in the miso line). The following are the
+ valid values.
+
+ - 0: No phase shift.
+ - 1: 90 degree phase shift sampling.
+ - 2: 180 degree phase shift sampling.
+ - 3: 270 degree phase shift sampling.
+
+Aliases:
+
+- All the SPI controller nodes should be represented in the aliases node using
+ the following format 'spi{n}' where n is a unique number for the alias.
+
+
+Example:
+
+- SoC Specific Portion:
+
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 66 0>;
+ tx-dma-channel = <&pdma0 5>;
+ rx-dma-channel = <&pdma0 4>;
+ };
+
+- Board Specific Portion:
+
+ spi_0: spi@12d20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpa2 4 2 3 0>,
+ <&gpa2 6 2 3 0>,
+ <&gpa2 7 2 3 0>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <10000>;
+
+ controller-data {
+ cs-gpio = <&gpa2 5 1 0 3>;
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
+ };
+ };
+ };