Merge branch 'remotes/lorenzo/pci/cadence'

- Convert cadence to use standard "dma-ranges" DT property instead of its
  own "cdns,no-bar-match-nbits" (Kishon Vijay Abraham I)

- Fix pm_runtime_put_sync() issues in cadence error paths (Kishon Vijay
  Abraham I)

- Add PTR_ALIGN_DOWN macro (Kishon Vijay Abraham I)

- Convert cadence r/w accessors to only 32-bit accesses (Kishon Vijay
  Abraham I)

- Add cadence support to start Link and check Link status (Kishon Vijay
  Abraham I)

- Allow custom PCI ops for cadence-based drivers (Kishon Vijay Abraham I)

- Remove "mem" from cadence reg binding since it's not memory and it
  overlaps the PCIe config and memory region (Kishon Vijay Abraham I)

- Add cadence ->cpu_addr_fixup() for platforms that require absolute
  addresses in the ATU, not just offsets (Kishon Vijay Abraham I)

- Update cadence Vendor IDs using local management registers, not
  architected config space (Kishon Vijay Abraham I)

- Add cadence endpoint driver MSI-X support (Kishon Vijay Abraham I)

- Add bindings and driver for TI J721E SoC, supporting both host and
  endpoint mode (Kishon Vijay Abraham I)

* remotes/lorenzo/pci/cadence:
  MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
  misc: pci_endpoint_test: Add J721E in pci_device_id table
  PCI: j721e: Add TI J721E PCIe driver
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
  dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
  PCI: cadence: Add MSI-X support to Endpoint driver
  PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
  PCI: cadence: Add new *ops* for CPU addr fixup
  dt-bindings: PCI: cadence: Remove "mem" from reg binding
  PCI: cadence: Allow pci_host_bridge to have custom pci_ops
  PCI: cadence: Add support to start link and verify link status
  PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses
  linux/kernel.h: Add PTR_ALIGN_DOWN macro
  PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
  PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property

3 files changed, 210 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index 84a8f095d031..6d67067843bf 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -18,13 +18,12 @@ properties:
     const: cdns,cdns-pcie-host
 
   reg:
-    maxItems: 3
+    maxItems: 2
 
   reg-names:
     items:
       - const: reg
       - const: cfg
-      - const: mem
 
   msi-parent: true
 
@@ -49,9 +48,8 @@ examples:
             device-id = <0x0200>;
 
             reg = <0x0 0xfb000000  0x0 0x01000000>,
-                  <0x0 0x41000000  0x0 0x00001000>,
-                  <0x0 0x40000000  0x0 0x04000000>;
-            reg-names = "reg", "cfg", "mem";
+                  <0x0 0x41000000  0x0 0x00001000>;
+            reg-names = "reg", "cfg";
 
             ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
                      <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 000000000000..cfe25cface21
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-ep.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: mem
+
+  ti,syscon-pcie-ctrl:
+    description: Phandle to the SYSCON entry required for configuring PCIe mode
+                 and link speed.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - cdns,max-outbound-regions
+  - dma-coherent
+  - max-functions
+  - phys
+  - phy-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@d000000 {
+           compatible = "ti,j721e-pcie-ep";
+           reg = <0x00 0x02900000 0x00 0x1000>,
+                 <0x00 0x02907000 0x00 0x400>,
+                 <0x00 0x0d000000 0x00 0x00800000>,
+                 <0x00 0x10000000 0x00 0x08000000>;
+           reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+           ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+           max-link-speed = <3>;
+           num-lanes = <2>;
+           power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 239 1>;
+           clock-names = "fck";
+           cdns,max-outbound-regions = <16>;
+           max-functions = /bits/ 8 <6>;
+           dma-coherent;
+           phys = <&serdes0_pcie_link>;
+           phy-names = "pcie-phy";
+       };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..d7b60487c6c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    description: Phandle to the SYSCON entry required for configuring PCIe mode
+      and link speed.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  vendor-id:
+    const: 0x104c
+
+  device-id:
+    const: 0xb00d
+
+  msi-map: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-coherent
+  - dma-ranges
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            vendor-id = <0x104c>;
+            device-id = <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie-phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+        };
+    };