Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...

25 files changed, 475 insertions, 129 deletions

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 49bbaf1a3ea6..f2ab6423b4af 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -211,6 +211,9 @@ properties:
           - qcom,gcc-msm8660
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
+          - qcom,msm8226-smp
+          # Only valid on ARM 32-bit, see above for ARM v8 64-bit
+          - qcom,msm8916-smp
           - renesas,apmu
           - renesas,r9a06g032-smp
           - rockchip,rk3036-smp
@@ -297,7 +300,8 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
+      "qcom,msm8916-smp".
 
       * arm/msm/qcom,kpss-acc.txt
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index f99c0c6df21b..bfc352a2fdd6 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -11,8 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - const: samsung,exynos4210-chipid
+    enum:
+      - samsung,exynos4210-chipid
+      - samsung,exynos850-chipid
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2.txt b/Documentation/devicetree/bindings/ddr/lpddr2.txt
deleted file mode 100644
index ddd40121e6f6..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr2.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
-
-Required properties:
-- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
-  "jedec,lpddr2-s4"
-
-  "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
-
-  "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
-
-  "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
-
-- density  : <u32> representing density in Mb (Mega bits)
-
-- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
-
-Optional properties:
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRRD-min-tck
-- tWTR-min-tck
-- tXP-min-tck
-- tRTP-min-tck
-- tCKE-min-tck
-- tRPab-min-tck
-- tRCD-min-tck
-- tWR-min-tck
-- tRASmin-min-tck
-- tCKESR-min-tck
-- tFAW-min-tck
-
-Child nodes:
-- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
-  "lpddr2-timings" provides AC timing parameters of the device for
-  a given speed-bin. The user may provide the timings for as many
-  speed-bins as is required. Please see Documentation/devicetree/
-  bindings/ddr/lpddr2-timings.txt for more information on "lpddr2-timings"
-
-Example:
-
-elpida_ECB240ABACN : lpddr2 {
-	compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
-	density		= <2048>;
-	io-width	= <32>;
-
-	tRPab-min-tck	= <3>;
-	tRCD-min-tck	= <3>;
-	tWR-min-tck	= <3>;
-	tRASmin-min-tck	= <3>;
-	tRRD-min-tck	= <2>;
-	tWTR-min-tck	= <2>;
-	tXP-min-tck	= <2>;
-	tRTP-min-tck	= <2>;
-	tCKE-min-tck	= <3>;
-	tCKESR-min-tck	= <3>;
-	tFAW-min-tck	= <8>;
-
-	timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <400000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <7500>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-	timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <200000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <10000>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-}
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index b36d74c1da7c..63e585f48789 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -102,7 +102,6 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/power/qcom-aoss-qmp.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
     displayport-controller@ae90000 {
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index a7333ad938d2..d7e3cda8924e 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -13,8 +13,10 @@ Required properties:
  * "qcom,scm-ipq806x"
  * "qcom,scm-ipq8074"
  * "qcom,scm-mdm9607"
+ * "qcom,scm-msm8226"
  * "qcom,scm-msm8660"
  * "qcom,scm-msm8916"
+ * "qcom,scm-msm8953"
  * "qcom,scm-msm8960"
  * "qcom,scm-msm8974"
  * "qcom,scm-msm8994"
@@ -33,7 +35,7 @@ Required properties:
  * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
    "qcom,scm-msm8960"
  * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916" and "qcom,scm-msm8974"
+   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
new file mode 100644
index 000000000000..25ed0266f6dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elpida,ECB240ABACN
+              - elpida,B8132B2PB-6D-F
+          - enum:
+              - jedec,lpddr2-s4
+      - items:
+          - enum:
+              - jedec,lpddr2-s2
+      - items:
+          - enum:
+              - jedec,lpddr2-nvm
+
+  revision-id1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 1 value of SDRAM chip. Obtained from device datasheet.
+
+  revision-id2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 2 value of SDRAM chip. Obtained from device datasheet.
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Density in megabits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 4096
+      - 8192
+      - 16384
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      IO bus width in bits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 32
+      - 16
+      - 8
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Active bank a to active bank b in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles. Obtained from device datasheet.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      WRITE recovery time in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tRASmin-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row active time in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Four-bank activate window in terms of number of clock cycles. Obtained
+      from device datasheet.
+
+patternProperties:
+  "^lpddr2-timings":
+    type: object
+    description: |
+      The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+      "lpddr2-timings" provides AC timing parameters of the device for
+      a given speed-bin. The user may provide the timings for as many
+      speed-bins as is required. Please see Documentation/devicetree/
+      bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
+      on "lpddr2-timings".
+
+required:
+  - compatible
+  - density
+  - io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    elpida_ECB240ABACN: lpddr2 {
+        compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
+        density = <2048>;
+        io-width = <32>;
+        revision-id1 = <1>;
+        revision-id2 = <0>;
+
+        tRPab-min-tck = <3>;
+        tRCD-min-tck = <3>;
+        tWR-min-tck = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck = <2>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tCKE-min-tck = <3>;
+        tCKESR-min-tck = <3>;
+        tFAW-min-tck = <8>;
+
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <400000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <7500>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <200000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <10000>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
index 9ceb19e0c7fd..9ceb19e0c7fd 100644
--- a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
index 84705e50a3fd..84705e50a3fd 100644
--- a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
index b221e653d384..031af5fb0379 100644
--- a/Documentation/devicetree/bindings/ddr/lpddr3.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
@@ -43,8 +43,9 @@ These values shall be obtained from the device data-sheet.
 Child nodes:
 - The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
   "lpddr3-timings" provides AC timing parameters of the device for
-  a given speed-bin. Please see Documentation/devicetree/
-  bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
+  a given speed-bin. Please see
+  Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+  for more information on "lpddr3-timings"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index e87e4382807c..3a82b0b27fa0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183 and mt8192.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -36,6 +36,9 @@ properties:
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
           - mediatek,mt8192-smi-common
+          - mediatek,mt8195-smi-common-vdo
+          - mediatek,mt8195-smi-common-vpp
+          - mediatek,mt8195-smi-sub-common
 
       - description: for mt7623
         items:
@@ -65,6 +68,10 @@ properties:
     minItems: 2
     maxItems: 4
 
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi-common node above. Only for sub-common.
+
 required:
   - compatible
   - reg
@@ -91,6 +98,29 @@ allOf:
             - const: smi
             - const: async
 
+  - if:  # only for sub common
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-smi-sub-common
+    then:
+      required:
+        - mediatek,smi
+      properties:
+        clock:
+          items:
+            minItems: 3
+            maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+    else:
+      properties:
+        mediatek,smi: false
+
   - if:  # for gen2 HW that have gals
       properties:
         compatible:
@@ -98,6 +128,8 @@ allOf:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
             - mediatek,mt8192-smi-common
+            - mediatek,mt8195-smi-common-vdo
+            - mediatek,mt8195-smi-common-vpp
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2353f6cf3c80..eaeff1ada7f8 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -24,6 +24,7 @@ properties:
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
           - mediatek,mt8192-smi-larb
+          - mediatek,mt8195-smi-larb
 
       - description: for mt7623
         items:
@@ -74,6 +75,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8195-smi-larb
 
     then:
       properties:
@@ -108,6 +110,7 @@ allOf:
               - mediatek,mt6779-smi-larb
               - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
+              - mediatek,mt8195-smi-larb
 
     then:
       required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index cac6842dc8f1..2fa44951cfde 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -164,12 +164,20 @@ patternProperties:
       "#size-cells":
         const: 0
 
+      lpddr2:
+        $ref: "ddr/jedec,lpddr2.yaml#"
+        type: object
+
     patternProperties:
       "^emc-table@[0-9]+$":
         $ref: "#/$defs/emc-table"
 
-    required:
-      - nvidia,ram-code
+    oneOf:
+      - required:
+          - nvidia,ram-code
+
+      - required:
+          - lpddr2
 
     additionalProperties: false
 
@@ -227,4 +235,15 @@ examples:
                         0x00000000 0x00000000 0x00000000 0x00000000>;
             };
         };
+
+        emc-tables@1 {
+            reg = <1>;
+
+            lpddr2 {
+                compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+                revision-id1 = <1>;
+                density = <2048>;
+                io-width = <16>;
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index d25072c414e4..9da80e8f2444 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -33,6 +33,7 @@ properties:
           - renesas,r8a77970-rpc-if       # R-Car V3M
           - renesas,r8a77980-rpc-if       # R-Car V3H
           - renesas,r8a77995-rpc-if       # R-Car D3
+          - renesas,r8a779a0-rpc-if       # R-Car V3U
       - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2 device
 
   reg:
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index 6f4fd5814bf4..fe8639dcffab 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -51,7 +51,8 @@ properties:
     $ref: '/schemas/types.yaml#/definitions/phandle'
     description: |
       phandle of the connected DRAM memory device. For more information please
-      refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt
+      refer to documentation file:
+      Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
 
   operating-points-v2: true
 
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 239f37881cae..e810480e3eb7 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -19,6 +19,7 @@ properties:
       - qcom,mdm9607-rpmpd
       - qcom,msm8916-rpmpd
       - qcom,msm8939-rpmpd
+      - qcom,msm8953-rpmpd
       - qcom,msm8976-rpmpd
       - qcom,msm8994-rpmpd
       - qcom,msm8996-rpmpd
@@ -31,6 +32,7 @@ properties:
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
       - qcom,sm6115-rpmpd
+      - qcom,sm6350-rpmhpd
       - qcom,sm8150-rpmhpd
       - qcom,sm8250-rpmhpd
       - qcom,sm8350-rpmhpd
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
index 370579aeeca1..578bfa529b16 100644
--- a/Documentation/devicetree/bindings/reset/microchip,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -20,7 +20,9 @@ properties:
     pattern: "^reset-controller@[0-9a-f]+$"
 
   compatible:
-    const: microchip,sparx5-switch-reset
+    enum:
+      - microchip,sparx5-switch-reset
+      - microchip,lan966x-switch-reset
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index 29e4a900cad7..bfbd3e9b4186 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -23,6 +23,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-reset
       - socionext,uniphier-ld20-usb3-reset
       - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
       - socionext,uniphier-pro4-ahci-reset
       - socionext,uniphier-pxs2-ahci-reset
       - socionext,uniphier-pxs3-ahci-reset
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
index 4c9b0ebf6869..377a7d242323 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -23,6 +23,7 @@ properties:
           - socionext,uniphier-ld11-reset
           - socionext,uniphier-ld20-reset
           - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
       - description: Media I/O (MIO) reset, SD reset
         enum:
           - socionext,uniphier-ld4-mio-reset
@@ -34,6 +35,7 @@ properties:
           - socionext,uniphier-ld11-sd-reset
           - socionext,uniphier-ld20-sd-reset
           - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
       - description: Peripheral reset
         enum:
           - socionext,uniphier-ld4-peri-reset
@@ -44,6 +46,7 @@ properties:
           - socionext,uniphier-ld11-peri-reset
           - socionext,uniphier-ld20-peri-reset
           - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
       - description: Analog signal amplifier reset
         enum:
           - socionext,uniphier-ld11-adamv-reset
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 93e4b737ee1b..e2e173dfada7 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -19,8 +19,7 @@ description:
 
   The AOSS side channel exposes control over a set of resources, used to control
   a set of debug related clocks and to affect the low power state of resources
-  related to the secondary subsystems. These resources are exposed as a set of
-  power-domains.
+  related to the secondary subsystems.
 
 properties:
   compatible:
@@ -30,6 +29,7 @@ properties:
           - qcom,sc7280-aoss-qmp
           - qcom,sc8180x-aoss-qmp
           - qcom,sdm845-aoss-qmp
+          - qcom,sm6350-aoss-qmp
           - qcom,sm8150-aoss-qmp
           - qcom,sm8250-aoss-qmp
           - qcom,sm8350-aoss-qmp
@@ -57,13 +57,6 @@ properties:
     description:
       The single clock represents the QDSS clock.
 
-  "#power-domain-cells":
-    const: 1
-    description: |
-        The provided power-domains are:
-        CDSP state (0), LPASS state (1), modem state (2), SLPI
-        state (3), SPSS state (4) and Venus state (5).
-
 required:
   - compatible
   - reg
@@ -101,7 +94,6 @@ examples:
       mboxes = <&apss_shared 0>;
 
       #clock-cells = <0>;
-      #power-domain-cells = <1>;
 
       cx_cdev: cx {
         #cooling-cells = <2>;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index cc3fe5ed7421..b32457c2fc0b 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -34,6 +34,7 @@ properties:
       - qcom,rpm-ipq6018
       - qcom,rpm-msm8226
       - qcom,rpm-msm8916
+      - qcom,rpm-msm8953
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
       - qcom,rpm-msm8996
@@ -41,6 +42,7 @@ properties:
       - qcom,rpm-sdm660
       - qcom,rpm-sm6115
       - qcom,rpm-sm6125
+      - qcom,rpm-qcm2290
       - qcom,rpm-qcs404
 
   qcom,smd-channels:
@@ -57,6 +59,7 @@ if:
           - qcom,rpm-apq8084
           - qcom,rpm-msm8916
           - qcom,rpm-msm8974
+          - qcom,rpm-msm8953
 then:
   required:
     - qcom,smd-channels
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
index f7e17713b3d8..4149cf2b66be 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
@@ -10,14 +10,18 @@ maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-description: |
-  This binding describes the Qualcomm Shared Memory Manager, used to share data
-  between various subsystems and OSes in Qualcomm platforms.
+description:
+  This binding describes the Qualcomm Shared Memory Manager, a region of
+  reserved-memory used to share data between various subsystems and OSes in
+  Qualcomm platforms.
 
 properties:
   compatible:
     const: qcom,smem
 
+  reg:
+    maxItems: 1
+
   memory-region:
     maxItems: 1
     description: handle to memory reservation for main SMEM memory region.
@@ -29,11 +33,19 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: handle to RPM message memory resource
 
+  no-map: true
+
 required:
   - compatible
-  - memory-region
   - hwlocks
 
+oneOf:
+  - required:
+      - reg
+      - no-map
+  - required:
+      - memory-region
+
 additionalProperties: false
 
 examples:
@@ -43,6 +55,20 @@ examples:
         #size-cells = <1>;
         ranges;
 
+        smem@fa00000 {
+            compatible = "qcom,smem";
+            reg = <0xfa00000 0x200000>;
+            no-map;
+
+            hwlocks = <&tcsr_mutex 3>;
+        };
+    };
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
         smem_region: smem@fa00000 {
             reg = <0xfa00000 0x200000>;
             no-map;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
new file mode 100644
index 000000000000..07d2d5398345
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Subsystem Power Manager binding
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Qualcomm Subsystem Power Manager, used to control
+  the peripheral logic surrounding the application cores in Qualcomm platforms.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sdm660-gold-saw2-v4.1-l2
+          - qcom,sdm660-silver-saw2-v4.1-l2
+          - qcom,msm8998-gold-saw2-v4.1-l2
+          - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8064-saw2-v1.1-cpu
+      - const: qcom,saw2
+
+  reg:
+    description: Base address and size of the SPM register region
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-manager@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+  - |
+
+    /*
+     * Example 2: New-gen multi cluster SoC using SAW only for L2;
+     * This does not require any cpuidle driver, nor any cpu phandle.
+     */
+    power-manager@17812000 {
+        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17812000 0x1000>;
+    };
+
+    power-manager@17912000 {
+        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17912000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
new file mode 100644
index 000000000000..99dff7d73b7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Stats bindings
+
+maintainers:
+  - Maulik Shah <mkshah@codeaurora.org>
+
+description:
+  Always On Processor/Resource Power Manager maintains statistics of the SoC
+  sleep modes involving powering down of the rails and oscillator clock.
+
+  Statistics includes SoC sleep mode type, number of times low power mode were
+  entered, time of last entry, time of last exit and accumulated sleep duration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpmh-stats
+      - qcom,rpm-stats
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Example of rpmh sleep stats
+  - |
+    sram@c3f0000 {
+      compatible = "qcom,rpmh-stats";
+      reg = <0x0c3f0000 0x400>;
+    };
+  # Example of rpm sleep stats
+  - |
+    sram@4690000 {
+      compatible = "qcom,rpm-stats";
+      reg = <0x04690000 0x10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 939cf2418445..d4e418b6a1c1 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -31,6 +31,7 @@ properties:
         - amlogic,meson-gxbb-sram
         - arm,juno-sram-ns
         - atmel,sama5d2-securam
+        - qcom,rpm-msg-ram
         - rockchip,rk3288-pmu-sram
 
   reg:
@@ -135,7 +136,9 @@ if:
   properties:
     compatible:
       contains:
-        const: rockchip,rk3288-pmu-sram
+        enum:
+          - qcom,rpm-msg-ram
+          - rockchip,rk3288-pmu-sram
 
 else:
   required:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 518487ec65e5..3c28347f873e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -359,6 +359,8 @@ patternProperties:
     description: Shenzhen Elida Technology Co., Ltd.
   "^elimo,.*":
     description: Elimo Engineering Ltd.
+  "^elpida,.*":
+    description: Elpida Memory, Inc.
   "^embest,.*":
     description: Shenzhen Embest Technology Co., Ltd.
   "^emlid,.*":