Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

8 files changed, 596 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
index 07c65e3cdcbe..f4d04a067282 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
@@ -3,9 +3,11 @@ Altera SOCFPGA System Manager
 Required properties:
 - compatible : "altr,sys-mgr"
 - reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
 
 Example:
 	 sysmgr@ffd08000 {
 		compatible = "altr,sys-mgr";
 		reg = <0xffd08000 0x1000>;
+		cpu1-start-addr = <0xffd080c4>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt
index 1881e1c6dda5..c6ba6d3c747f 100644
--- a/Documentation/devicetree/bindings/arm/sirf.txt
+++ b/Documentation/devicetree/bindings/arm/sirf.txt
@@ -1,3 +1,9 @@
-prima2 "cb" evaluation board
+CSR SiRFprimaII and SiRFmarco device tree bindings.
+========================================
+
 Required root node properties:
-    - compatible = "sirf,prima2-cb", "sirf,prima2";
+    - compatible:
+    - "sirf,prima2-cb" : prima2 "cb" evaluation board
+    - "sirf,marco-cb" : marco "cb" evaluation board
+    - "sirf,prima2" : prima2 device based board
+    - "sirf,marco" : marco device based board
diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt
index d657832c6819..87dc1ddf4770 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.txt
+++ b/Documentation/devicetree/bindings/arm/vt8500.txt
@@ -12,3 +12,11 @@ compatible = "wm,wm8505";
 Boards with the Wondermedia WM8650 SoC shall have the following properties:
 Required root node property:
 compatible = "wm,wm8650";
+
+Boards with the Wondermedia WM8750 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8750";
+
+Boards with the Wondermedia WM8850 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8850";
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
new file mode 100644
index 000000000000..19df842c694f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt
@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX31
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy	             0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	upll                 5
+	mcu_main             6
+	hsp                  7
+	ahb                  8
+	nfc                  9
+	ipg                  10
+	per_div              11
+	per                  12
+	csi_sel              13
+	fir_sel              14
+	csi_div              15
+	usb_div_pre          16
+	usb_div_post         17
+	fir_div_pre          18
+	fir_div_post         19
+	sdhc1_gate           20
+	sdhc2_gate           21
+	gpt_gate             22
+	epit1_gate           23
+	epit2_gate           24
+	iim_gate             25
+	ata_gate             26
+	sdma_gate            27
+	cspi3_gate           28
+	rng_gate             29
+	uart1_gate           30
+	uart2_gate           31
+	ssi1_gate            32
+	i2c1_gate            33
+	i2c2_gate            34
+	i2c3_gate            35
+	hantro_gate          36
+	mstick1_gate         37
+	mstick2_gate         38
+	csi_gate             39
+	rtc_gate             40
+	wdog_gate            41
+	pwm_gate             42
+	sim_gate             43
+	ect_gate             44
+	usb_gate             45
+	kpp_gate             46
+	ipu_gate             47
+	uart3_gate           48
+	uart4_gate           49
+	uart5_gate           50
+	owire_gate           51
+	ssi2_gate            52
+	cspi1_gate           53
+	cspi2_gate           54
+	gacc_gate            55
+	emi_gate             56
+	rtic_gate            57
+	firi_gate            58
+
+Examples:
+
+clks: ccm@53f80000{
+	compatible = "fsl,imx31-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <0 31 0x04 0 53 0x04>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 10>, <&clks 30>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
new file mode 100644
index 000000000000..0921fac73528
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -0,0 +1,205 @@
+NVIDIA Tegra20 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra20-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+  The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  registers. These IDs often match those in the CAR's RST_DEVICES registers,
+  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+  this case, those clocks are assigned IDs above 95 in order to highlight
+  this issue. Implementations that interpret these clock IDs as bit values
+  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+  explicitly handle these special cases.
+
+  The balance of the clocks controlled by the CAR are assigned IDs of 96 and
+  above.
+
+  0	cpu
+  1	unassigned
+  2	unassigned
+  3	ac97
+  4	rtc
+  5	tmr
+  6	uart1
+  7	unassigned	(register bit affects uart2 and vfir)
+  8	gpio
+  9	sdmmc2
+  10	unassigned	(register bit affects spdif_in and spdif_out)
+  11	i2s1
+  12	i2c1
+  13	ndflash
+  14	sdmmc1
+  15	sdmmc4
+  16	twc
+  17	pwm
+  18	i2s2
+  19	epp
+  20	unassigned	(register bit affects vi and vi_sensor)
+  21	2d
+  22	usbd
+  23	isp
+  24	3d
+  25	ide
+  26	disp2
+  27	disp1
+  28	host1x
+  29	vcp
+  30	unassigned
+  31	cache2
+
+  32	mem
+  33	ahbdma
+  34	apbdma
+  35	unassigned
+  36	kbc
+  37	stat_mon
+  38	pmc
+  39	fuse
+  40	kfuse
+  41	sbc1
+  42	snor
+  43	spi1
+  44	sbc2
+  45	xio
+  46	sbc3
+  47	dvc
+  48	dsi
+  49	unassigned	(register bit affects tvo and cve)
+  50	mipi
+  51	hdmi
+  52	csi
+  53	tvdac
+  54	i2c2
+  55	uart3
+  56	unassigned
+  57	emc
+  58	usb2
+  59	usb3
+  60	mpe
+  61	vde
+  62	bsea
+  63	bsev
+
+  64	speedo
+  65	uart4
+  66	uart5
+  67	i2c3
+  68	sbc4
+  69	sdmmc3
+  70	pcie
+  71	owr
+  72	afi
+  73	csite
+  74	unassigned
+  75	avpucq
+  76	la
+  77	unassigned
+  78	unassigned
+  79	unassigned
+  80	unassigned
+  81	unassigned
+  82	unassigned
+  83	unassigned
+  84	irama
+  85	iramb
+  86	iramc
+  87	iramd
+  88	cram2
+  89	audio_2x	a/k/a audio_2x_sync_clk
+  90	clk_d
+  91	unassigned
+  92	sus
+  93	cdev1
+  94	cdev2
+  95	unassigned
+
+  96	uart2
+  97	vfir
+  98	spdif_in
+  99	spdif_out
+  100	vi
+  101	vi_sensor
+  102	tvo
+  103	cve
+  104	osc
+  105	clk_32k		a/k/a clk_s
+  106	clk_m
+  107	sclk
+  108	cclk
+  109	hclk
+  110	pclk
+  111	blink
+  112	pll_a
+  113	pll_a_out0
+  114	pll_c
+  115	pll_c_out1
+  116	pll_d
+  117	pll_d_out0
+  118	pll_e
+  119	pll_m
+  120	pll_m_out1
+  121	pll_p
+  122	pll_p_out1
+  123	pll_p_out2
+  124	pll_p_out3
+  125	pll_p_out4
+  126	pll_s
+  127	pll_u
+  128	pll_x
+  129	cop		a/k/a avp
+  130	audio		a/k/a audio_sync_clk
+  131	pll_ref
+  132	twd
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra20-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car 58>; /* usb2 */
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
new file mode 100644
index 000000000000..f3da3be5fcad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -0,0 +1,262 @@
+NVIDIA Tegra30 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra30-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+  The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  registers. These IDs often match those in the CAR's RST_DEVICES registers,
+  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+  this case, those clocks are assigned IDs above 160 in order to highlight
+  this issue. Implementations that interpret these clock IDs as bit values
+  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+  explicitly handle these special cases.
+
+  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+  above.
+
+  0	cpu
+  1	unassigned
+  2	unassigned
+  3	unassigned
+  4	rtc
+  5	timer
+  6	uarta
+  7	unassigned	(register bit affects uartb and vfir)
+  8	gpio
+  9	sdmmc2
+  10	unassigned	(register bit affects spdif_in and spdif_out)
+  11	i2s1
+  12	i2c1
+  13	ndflash
+  14	sdmmc1
+  15	sdmmc4
+  16	unassigned
+  17	pwm
+  18	i2s2
+  19	epp
+  20	unassigned	(register bit affects vi and vi_sensor)
+  21	2d
+  22	usbd
+  23	isp
+  24	3d
+  25	unassigned
+  26	disp2
+  27	disp1
+  28	host1x
+  29	vcp
+  30	i2s0
+  31	cop_cache
+
+  32	mc
+  33	ahbdma
+  34	apbdma
+  35	unassigned
+  36	kbc
+  37	statmon
+  38	pmc
+  39	unassigned	(register bit affects fuse and fuse_burn)
+  40	kfuse
+  41	sbc1
+  42	nor
+  43	unassigned
+  44	sbc2
+  45	unassigned
+  46	sbc3
+  47	i2c5
+  48	dsia
+  49	unassigned	(register bit affects cve and tvo)
+  50	mipi
+  51	hdmi
+  52	csi
+  53	tvdac
+  54	i2c2
+  55	uartc
+  56	unassigned
+  57	emc
+  58	usb2
+  59	usb3
+  60	mpe
+  61	vde
+  62	bsea
+  63	bsev
+
+  64	speedo
+  65	uartd
+  66	uarte
+  67	i2c3
+  68	sbc4
+  69	sdmmc3
+  70	pcie
+  71	owr
+  72	afi
+  73	csite
+  74	pciex
+  75	avpucq
+  76	la
+  77	unassigned
+  78	unassigned
+  79	dtv
+  80	ndspeed
+  81	i2cslow
+  82	dsib
+  83	unassigned
+  84	irama
+  85	iramb
+  86	iramc
+  87	iramd
+  88	cram2
+  89	unassigned
+  90	audio_2x	a/k/a audio_2x_sync_clk
+  91	unassigned
+  92	csus
+  93	cdev2
+  94	cdev1
+  95	unassigned
+
+  96	cpu_g
+  97	cpu_lp
+  98	3d2
+  99	mselect
+  100	tsensor
+  101	i2s3
+  102	i2s4
+  103	i2c4
+  104	sbc5
+  105	sbc6
+  106	d_audio
+  107	apbif
+  108	dam0
+  109	dam1
+  110	dam2
+  111	hda2codec_2x
+  112	atomics
+  113	audio0_2x
+  114	audio1_2x
+  115	audio2_2x
+  116	audio3_2x
+  117	audio4_2x
+  118	audio5_2x
+  119	actmon
+  120	extern1
+  121	extern2
+  122	extern3
+  123	sata_oob
+  124	sata
+  125	hda
+  127	se
+  128	hda2hdmi
+  129	sata_cold
+
+  160	uartb
+  161	vfir
+  162	spdif_in
+  163	spdif_out
+  164	vi
+  165	vi_sensor
+  166	fuse
+  167	fuse_burn
+  168	cve
+  169	tvo
+
+  170	clk_32k
+  171	clk_m
+  172	clk_m_div2
+  173	clk_m_div4
+  174	pll_ref
+  175	pll_c
+  176	pll_c_out1
+  177	pll_m
+  178	pll_m_out1
+  179	pll_p
+  180	pll_p_out1
+  181	pll_p_out2
+  182	pll_p_out3
+  183	pll_p_out4
+  184	pll_a
+  185	pll_a_out0
+  186	pll_d
+  187	pll_d_out0
+  188	pll_d2
+  189	pll_d2_out0
+  190	pll_u
+  191	pll_x
+  192	pll_x_out0
+  193	pll_e
+  194	spdif_in_sync
+  195	i2s0_sync
+  196	i2s1_sync
+  197	i2s2_sync
+  198	i2s3_sync
+  199	i2s4_sync
+  200	vimclk
+  201	audio0
+  202	audio1
+  203	audio2
+  204	audio3
+  205	audio4
+  206	audio5
+  207	clk_out_1 (extern1)
+  208	clk_out_2 (extern2)
+  209	clk_out_3 (extern3)
+  210	sclk
+  211	blink
+  212	cclk_g
+  213	cclk_lp
+  214	twd
+  215	cml0
+  216	cml1
+  217	hclk
+  218	pclk
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra30-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car 58>; /* usb2 */
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index e9b005dc7625..34c952883276 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -11,6 +11,7 @@ Required properties :
  - phy_type : Should be one of "ulpi" or "utmi".
  - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
    activated for the bus to be powered.
+ - nvidia,phy : phandle of the PHY instance, the controller is connected to.
 
 Required properties for phy_type == ulpi:
   - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
@@ -27,3 +28,5 @@ Optional properties:
     registers are accessed through the APB_MISC base address instead of
     the USB controller. Since this is a legacy issue it probably does not
     warrant a compatible string of its own.
+  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
+    USB ports, which need reset twice due to hardware issues.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
new file mode 100644
index 000000000000..6bdaba2f0aa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -0,0 +1,17 @@
+Tegra SOC USB PHY
+
+The device node for Tegra SOC USB PHY:
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-usb-phy".
+ - reg : Address and length of the register set for the USB PHY interface.
+ - phy_type : Should be one of "ulpi" or "utmi".
+
+Required properties for phy_type == ulpi:
+  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+
+Optional properties:
+  - nvidia,has-legacy-mode : boolean indicates whether this controller can
+    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
+    registers are accessed through the APB_MISC base address instead of
+    the USB controller.
\ No newline at end of file