Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons:

   - Rockchip rk3368 gains power domain support
   - Small updates for the ARM spmi driver
   - The Atmel PMC driver saw a larger rework, touching both
     arch/arm/mach-at91 and drivers/clk/at91
   - All reset controller driver changes alway get merged through
     arm-soc, though this time the largest change is the addition of a
     MIPS pistachio reset driver
   - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  bus: imx-weim: Take the 'status' property value into account
  clk: at91: remove useless includes
  clk: at91: pmc: remove useless capacities handling
  clk: at91: pmc: drop at91_pmc_base
  usb: gadget: atmel: access the PMC using regmap
  ARM: at91: remove useless includes and function prototypes
  ARM: at91: pm: move idle functions to pm.c
  ARM: at91: pm: find and remap the pmc
  ARM: at91: pm: simply call at91_pm_init
  clk: at91: pmc: move pmc structures to C file
  clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe
  clk: at91: remove IRQ handling and use polling
  clk: at91: make use of syscon/regmap internally
  clk: at91: make use of syscon to share PMC registers in several drivers
  hwmon: (scpi) add energy meter support
  firmware: arm_scpi: add support for 64-bit sensor values
  firmware: arm_scpi: decrease Tx timeout to 20ms
  firmware: arm_scpi: fix send_message and sensor_get_value for big-endian
  reset: sti: Make reset_control_ops const
  reset: zynq: Make reset_control_ops const
  ...

3 files changed, 81 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
index 704be9306c9f..01683707060b 100644
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -46,6 +46,9 @@ Timing properties for child nodes. All are optional and default to 0.
  - gpmc,adv-on-ns:	Assertion time
  - gpmc,adv-rd-off-ns:	Read deassertion time
  - gpmc,adv-wr-off-ns:	Write deassertion time
+ - gpmc,adv-aad-mux-on-ns:	Assertion time for AAD
+ - gpmc,adv-aad-mux-rd-off-ns:	Read deassertion time for AAD
+ - gpmc,adv-aad-mux-wr-off-ns:	Write deassertion time for AAD
 
  WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
  - gpmc,we-on-ns	Assertion time
@@ -54,6 +57,8 @@ Timing properties for child nodes. All are optional and default to 0.
  OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
  - gpmc,oe-on-ns:	Assertion time
  - gpmc,oe-off-ns:	Deassertion time
+ - gpmc,oe-aad-mux-on-ns:	Assertion time for AAD
+ - gpmc,oe-aad-mux-off-ns:	Deassertion time for AAD
 
  Access time and cycle time timings (in nanoseconds) corresponding to
  GPMC_CONFIG5:
diff --git a/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt
new file mode 100644
index 000000000000..8c05d16367df
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt
@@ -0,0 +1,55 @@
+Pistachio Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable individual IP blocks within the Pistachio SoC using "soft reset"
+control bits found in the Pistachio SoC top level registers.
+
+The actual action taken when soft reset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers, and following an assert/deassert sequence the hardware's previous
+state may no longer be valid.
+
+Please refer to Documentation/devicetree/bindings/reset/reset.txt
+for common reset controller binding usage.
+
+Required properties:
+
+- compatible: Contains "img,pistachio-reset"
+
+- #reset-cells: Contains 1
+
+Example:
+
+	cr_periph: clk@18148000 {
+		compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clk_periph PERIPH_CLK_SYS>;
+		clock-names = "sys";
+		#clock-cells = <1>;
+
+		pistachio_reset: reset-controller {
+			compatible = "img,pistachio-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+Specifying reset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the pistachio reset device node and an
+index specifying which reset to use, as described in
+Documentation/devicetree/bindings/reset/reset.txt.
+
+Example:
+
+	spdif_out: spdif-out@18100d00 {
+		...
+		resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+		reset-names = "rst";
+		...
+	};
+
+Macro definitions for the supported resets can be found in:
+include/dt-bindings/reset/pistachio-resets.h
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
index 112756e11802..13dc6a3fdb4a 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power.
 Required properties for power domain controller:
 - compatible: Should be one of the following.
 	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
+	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
 - #power-domain-cells: Number of cells in a power-domain specifier.
 	Should be 1 for multiple PM domains.
 - #address-cells: Should be 1.
@@ -14,6 +15,7 @@ Required properties for power domain controller:
 Required properties for power domain sub nodes:
 - reg: index of the power domain, should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
 - clocks (optional): phandles to clocks which need to be enabled while power domain
 	switches state.
 
@@ -31,11 +33,24 @@ Example:
 		};
 	};
 
+	 power: power-controller {
+                compatible = "rockchip,rk3368-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pd_gpu_1 {
+                        reg = <RK3368_PD_GPU_1>;
+                        clocks = <&cru ACLK_GPU_CFG>;
+                };
+        };
+
 Node of a device using power domains must have a power-domains property,
 containing a phandle to the power device node and an index specifying which
 power domain to use.
 The index should use macros in:
 	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
+	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
 
 Example of the node using power domain:
 
@@ -44,3 +59,9 @@ Example of the node using power domain:
 		power-domains = <&power RK3288_PD_GPU>;
 		/* ... */
 	};
+
+	node {
+                /* ... */
+                power-domains = <&power RK3368_PD_GPU_1>;
+                /* ... */
+        };