Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...

2 files changed, 69 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
new file mode 100644
index 000000000000..937b755baf8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
@@ -0,0 +1,11 @@
+Samsung S5P/EXYNOS SoC series JPEG codec
+
+Required properties:
+
+- compatible	: should be one of:
+		  "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg";
+- reg		: address and length of the JPEG codec IP register set;
+- interrupts	: specifies the JPEG codec IP interrupt;
+- clocks	: should contain the JPEG codec IP gate clock specifier, from the
+		  common clock bindings;
+- clock-names	: should contain "jpeg" entry.
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
new file mode 100644
index 000000000000..1f51e0439c96
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
@@ -0,0 +1,58 @@
+Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+--------------------------------------------------------------------
+
+Required properties:
+
+- compatible	  : "samsung,s5k5baf";
+- reg		  : I2C slave address of the sensor;
+- vdda-supply	  : analog power supply 2.8V (2.6V to 3.0V);
+- vddreg-supply	  : regulator input power supply 1.8V (1.7V to 1.9V)
+		    or 2.8V (2.6V to 3.0);
+- vddio-supply	  : I/O power supply 1.8V (1.65V to 1.95V)
+		    or 2.8V (2.5V to 3.1V);
+- stbyn-gpios	  : GPIO connected to STDBYN pin;
+- rstn-gpios	  : GPIO connected to RSTN pin;
+- clocks	  : list of phandle and clock specifier pairs
+		    according to common clock bindings for the
+		    clocks described in clock-names;
+- clock-names	  : should include "mclk" for the sensor's master clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "mclk" clock should be
+		    configured to operate, in Hz; if this property is not
+		    specified default 24 MHz value will be used.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those
+nodes.
+
+endpoint node
+-------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+	       video-interfaces.txt. If present it should be <1> - the device
+	       supports only one data lane without re-mapping.
+
+Example:
+
+s5k5bafx@2d {
+	compatible = "samsung,s5k5baf";
+	reg = <0x2d>;
+	vdda-supply = <&cam_io_en_reg>;
+	vddreg-supply = <&vt_core_15v_reg>;
+	vddio-supply = <&vtcam_reg>;
+	stbyn-gpios = <&gpl2 0 1>;
+	rstn-gpios = <&gpl2 1 1>;
+	clock-names = "mclk";
+	clocks = <&clock_cam 0>;
+	clock-frequency = <24000000>;
+
+	port {
+		s5k5bafx_ep: endpoint {
+			remote-endpoint = <&csis1_ep>;
+			data-lanes = <1>;
+		};
+	};
+};