Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...

5 files changed, 49 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 000000000000..31a629dc75b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
new file mode 100644
index 000000000000..2d3ede66889d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+  See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+	aliases {
+		serial0 = &uart0;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
index 3acdd969edf1..f0c39261c5d4 100644
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
-		"sirf,marco-uart" or "sirf,marco-bt-uart" which means
+		"sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means
 		uart located in BT module and used for BT.
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain uart interrupt
@@ -37,7 +37,7 @@ usp@b0090000 {
 for uart use in BT module,
 uart6: uart@11000000 {
 	cell-index = <6>;
-	compatible = "sirf,marco-bt-uart", "sirf,marco-uart";
+	compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart";
 	reg = <0x11000000 0x1000>;
 	interrupts = <0 100 0>;
 	clocks = <&clks 138>, <&clks 140>, <&clks 141>;
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 000000000000..2aff0f22c9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1eb6444a48c4..cba613f8aa4f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -37,6 +37,7 @@ chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
 cnm	Chips&Media, Inc.
+cnxt	Conexant Systems, Inc.
 cortina	Cortina Systems, Inc.
 cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
@@ -162,6 +163,7 @@ snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson