Merge branch 'patchwork' into v4l_for_linus

* patchwork: (496 commits)
  [media] v4l: tvp5150: Add missing break in set control handler
  [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
  [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
  [media] em28xx: don't store usb_device at struct em28xx
  [media] em28xx: use usb_interface for dev_foo() calls
  [media] em28xx: don't change the device's name
  [media] mn88472: fix chip id check on probe
  [media] mn88473: fix chip id check on probe
  [media] lirc: fix error paths in lirc_cdev_add()
  [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
  [media] s5p-mfc: Rework clock handling
  [media] s5p-mfc: Don't keep clock prepared all the time
  [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
  [media] s5p-mfc: Remove dead conditional code
  [media] s5p-mfc: Ensure that clock is disabled before turning power off
  [media] s5p-mfc: Remove special clock rate management
  [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
  [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
  [media] vivid: Set color_enc on HSV formats
  [media] v4l2-tpg: Init hv_enc field with a valid value
  ...

7 files changed, 206 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
index 5fe9372abb37..26ca25b6d264 100644
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -3,7 +3,8 @@
 G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
 
 Required properties:
-- compatible: should be "samsung,exynos5-gsc"
+- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and
+	      5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433)
 - reg: should contain G-Scaler physical address location and length.
 - interrupts: should contain G-Scaler interrupt number
 
diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
index fb5e7606643a..54e1bede6244 100644
--- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
+++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
@@ -8,10 +8,11 @@ Required properties:
 	  the device. The interrupt specifier format depends on the interrupt
 	  controller parent.
 	- clocks: clock phandle and specifier pair.
-	- hisilicon,power-syscon: phandle of syscon used to control power.
 
 Optional properties:
 	- linux,rc-map-name : Remote control map name.
+	- hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files.
+		Provide correct clocks instead.
 
 Example node:
 
@@ -19,7 +20,6 @@ Example node:
 		compatible = "hisilicon,hix5hd2-ir";
 		reg = <0xf8001000 0x1000>;
 		interrupts = <0 47 4>;
-		clocks = <&clock HIX5HD2_FIXED_24M>;
-		hisilicon,power-syscon = <&sysctrl>;
+		clocks = <&clock HIX5HD2_IR_CLOCK>;
 		linux,rc-map-name = "rc-tivo";
 	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 8337f75c75da..9cbd92eb5d05 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint.
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+  - default-input: Select which input is selected after reset.
 
 Optional Endpoint Properties:
 
@@ -47,8 +48,6 @@ Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
-  - default-input: Select which input is selected after reset.
-
 Example:
 
 	hdmi_receiver@4c {
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
new file mode 100644
index 000000000000..4182063a54db
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -0,0 +1,109 @@
+* Mediatek Media Data Path
+
+Media Data Path is used for scaling and color space conversion.
+
+Required properties (controller (parent) node):
+- compatible: "mediatek,mt8173-mdp"
+- mediatek,vpu: the node of video processor unit, see
+  Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
+
+Required properties (all function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8173-mdp-rdma"  - read DMA
+        "mediatek,mt8173-mdp-rsz"   - resizer
+        "mediatek,mt8173-mdp-wdma"  - write DMA
+        "mediatek,mt8173-mdp-wrot"  - write DMA with rotation
+- reg: Physical base address and length of the function block register space
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+
+Required properties (DMA function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8173-mdp-rdma"
+        "mediatek,mt8173-mdp-wdma"
+        "mediatek,mt8173-mdp-wrot"
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+
+Example:
+mdp {
+	compatible = "mediatek,mt8173-mdp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+	mediatek,vpu = <&vpu>;
+
+	mdp_rdma0: rdma@14001000 {
+		compatible = "mediatek,mt8173-mdp-rdma";
+		reg = <0 0x14001000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+			 <&mmsys CLK_MM_MUTEX_32K>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	mdp_rdma1: rdma@14002000 {
+		compatible = "mediatek,mt8173-mdp-rdma";
+		reg = <0 0x14002000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+			 <&mmsys CLK_MM_MUTEX_32K>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+		mediatek,larb = <&larb4>;
+	};
+
+	mdp_rsz0: rsz@14003000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14003000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_rsz1: rsz@14004000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14004000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_rsz2: rsz@14005000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14005000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_wdma0: wdma@14006000 {
+		compatible = "mediatek,mt8173-mdp-wdma";
+		reg = <0 0x14006000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WDMA>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	mdp_wrot0: wrot@14007000 {
+		compatible = "mediatek,mt8173-mdp-wrot";
+		reg = <0 0x14007000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WROT0>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WROT0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	mdp_wrot1: wrot@14008000 {
+		compatible = "mediatek,mt8173-mdp-wrot";
+		reg = <0 0x14008000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WROT1>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WROT1>;
+		mediatek,larb = <&larb4>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 59a47a5b924b..46c15c54175d 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -1,25 +1,74 @@
 Mediatek Video Codec
 
 Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding functionalities.
+supports high resolution encoding and decoding functionalities.
 
 Required properties:
 - compatible : "mediatek,mt8173-vcodec-enc" for encoder
+  "mediatek,mt8173-vcodec-dec" for decoder.
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
 - mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
-- clock-names: encoder must contain "venc_sel_src", "venc_sel",
-- "venc_lt_sel_src", "venc_lt_sel".
+- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
+  "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
+  "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
+  "venc_lt_sel", "vdec_bus_clk_src".
 - iommus : should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
 - mediatek,vpu : the node of video processor unit
 
+
 Example:
-vcodec_enc: vcodec@0x18002000 {
+
+vcodec_dec: vcodec@16000000 {
+    compatible = "mediatek,mt8173-vcodec-dec";
+    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
+          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
+          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
+          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
+          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
+          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
+          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
+          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
+          <0 0x16026800 0 0x800>,   /*VP8_VD*/
+          <0 0x16027000 0 0x800>,   /*VP6_VD*/
+          <0 0x16027800 0 0x800>,   /*VP8_VL*/
+          <0 0x16028400 0 0x400>;   /*VP9_VD*/
+    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+    mediatek,larb = <&larb1>;
+    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+    mediatek,vpu = <&vpu>;
+    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+  };
+
+  vcodec_enc: vcodec@0x18002000 {
     compatible = "mediatek,mt8173-vcodec-enc";
     reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
           <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
new file mode 100644
index 000000000000..8dd1007bb573
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
@@ -0,0 +1,37 @@
+Renesas R-Car Fine Display Processor (FDP1)
+-------------------------------------------
+
+The FDP1 is a de-interlacing module which converts interlaced video to
+progressive video. It is capable of performing pixel format conversion between
+YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
+an input to the module.
+
+Required properties:
+
+ - compatible: must be "renesas,fdp1"
+ - reg: the register base and size for the device registers
+ - interrupts : interrupt specifier for the FDP1 instance
+ - clocks: reference to the functional clock
+
+Optional properties:
+
+ - power-domains: reference to the power domain that the FDP1 belongs to, if
+                  any.
+ - renesas,fcp: a phandle referencing the FCP that handles memory accesses
+                for the FDP1. Not needed on Gen2, mandatory on Gen3.
+
+Please refer to the binding documentation for the clock and/or power domain
+providers for more details.
+
+
+Device node example
+-------------------
+
+	fdp1@fe940000 {
+		compatible = "renesas,fdp1";
+		reg = <0 0xfe940000 0 0x2400>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 119>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		renesas,fcp = <&fcpf0>;
+	};
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 92c94f5ecbf1..2c901286d818 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -12,6 +12,7 @@ Required properties:
 	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
 	(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
 	(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
+	(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.