Merge tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
   - Provide common functions for ECAM mapping (Jayachandran C)
   - Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
   - Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
   - Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
   - Add Downstream Port Containment portdrv service type (Keith Busch)
   - Add Downstream Port Containment driver (Keith Busch)

  Resource management:
   - Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
   - Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
   - alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
   - Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
   - Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)

  PCI device hotplug:
   - acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
   - Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)

  Virtualization:
   - Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
   - Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
   - Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)

  IOMMU:
   - Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
   - Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
   - Add support for multiple DMA aliases (Jacek Lawrynowicz)
   - Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)

  Thunderbolt:
   - Fix double free of drom buffer (Andreas Noever)
   - Add Intel Thunderbolt device IDs (Lukas Wunner)
   - Fix typos and magic number (Lukas Wunner)
   - Support 1st gen Light Ridge controller (Lukas Wunner)

  Generic host bridge driver:
   - Use generic ECAM API (Jayachandran C)

  Cavium ThunderX host bridge driver:
   - Don't clobber read-only bits in bridge config registers (David Daney)
   - Use generic ECAM API (Jayachandran C)

  Freescale i.MX6 host bridge driver:
   - Use enum instead of bool for variant indicator (Andrey Smirnov)
   - Implement reset sequence for i.MX6+ (Andrey Smirnov)
   - Factor out ref clock enable (Bjorn Helgaas)
   - Add initial imx6sx support (Christoph Fritz)
   - Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
   - Add DT property for link gen, default to Gen1 (Tim Harvey)
   - dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
   - dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)

  Marvell Armada host bridge driver:
   - add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
   - Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)

  Marvell MVEBU host bridge driver:
   - Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
   - Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)

  Microsoft Hyper-V host bridge driver:
   - Report resources release after stopping the bus (Vitaly Kuznetsov)
   - Add explicit barriers to config space access (Vitaly Kuznetsov)

  Renesas R-Car host bridge driver:
   - Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)

  Synopsys DesignWare host bridge driver:
   - Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
   - Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)

  TI Keystone host bridge driver:
   - Add error IRQ handler (Murali Karicheri)
   - Remove unnecessary goto statement (Murali Karicheri)

  Miscellaneous:
   - Fix spelling errors (Colin Ian King)"

* tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Disable all BAR sizing for devices with non-compliant BARs
  x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
  PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
  PCI, of: Move PCI I/O space management to PCI core code
  PCI: generic, thunder: Use generic ECAM API
  PCI: Provide common functions for ECAM mapping
  PCI: hv: Add explicit barriers to config space access
  PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
  PCI: Add Downstream Port Containment driver
  PCI: Add Downstream Port Containment portdrv service type
  PCI: Widen portdrv service type from 4 bits to 8 bits
  PCI: designware: Remove incorrect RC memory base/limit configuration
  PCI: hv: Report resources release after stopping the bus
  ARM: dts: imx6qp: Specify imx6qp version of PCIe core
  PCI: imx6: Implement reset sequence for i.MX6+
  PCI: imx6: Use enum instead of bool for variant indicator
  PCI: thunder: Don't clobber read-only bits in bridge config registers
  thunderbolt: Fix double free of drom buffer
  PCI: rcar: Select PCI_MSI_IRQ_DOMAIN
  PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
  ...

3 files changed, 55 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 3be80c68941a..83aeb1f5a645 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -4,8 +4,8 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
 
 Required properties:
-- compatible: "fsl,imx6q-pcie"
-- reg: base addresse and length of the pcie controller
+- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
+- reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
 - interrupt-names: Must include the following entries:
@@ -19,6 +19,20 @@ Optional properties:
 - fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
 - fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
 - fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for
+  gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs
+  do not meet gen2 jitter requirements and thus for gen2 capability a gen2
+  compliant clock generator should be used and configured.
+- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset
+  signal. It's not polarity aware and defaults to active-low reset sequence
+  (L=reset state, H=operation state).
+- reset-gpio-active-high: If present then the reset sequence using the GPIO
+  specified in the "reset-gpio" property is reversed (H=reset state,
+  L=operation state).
+
+Additional required properties for imx6sx-pcie:
+- clock names: Must include the following additional entries:
+	- "pcie_inbound_axi"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
new file mode 100644
index 000000000000..598533a57d79
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -0,0 +1,38 @@
+* Marvell Armada 7K/8K PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie"
+- reg: must contain two register regions
+   - the control register region
+   - the config space region
+- reg-names:
+   - "ctrl" for the control register region
+   - "config" for the config space region
+- interrupts: Interrupt specifier for the PCIe controler
+- clocks: reference to the PCIe controller clock
+
+Example:
+
+	pcie@f2600000 {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+
+		bus-range = <0 0xff>;
+		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
+			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clocks = <&cpm_syscon0 1 13>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 54eae2938174..d08a4d51108f 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -56,6 +56,7 @@ Optional properties:-
 	phy-names: name of the Generic Keystine SerDes phy for PCI
 	  - If boot loader already does PCI link establishment, then phys and
 	    phy-names shouldn't be present.
+	interrupts: platform interrupt for error interrupts.
 
 Designware DT Properties not applicable for Keystone PCI