Merge tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big Staging and IIO driver patches for 4.16-rc1.

  There is the normal amount of new IIO drivers added, like all
  releases.

  The networking IPX and the ncpfs filesystem are moved into the staging
  tree, as they are on their way out of the kernel due to lack of use
  anymore.

  The visorbus subsystem finall has started moving out of the staging
  tree to the "real" part of the kernel, and the most and fsl-mc
  codebases are almost ready to move out, that will probably happen for
  4.17-rc1 if all goes well.

  Other than that, there is a bunch of license header cleanups in the
  tree, along with the normal amount of coding style churn that we all
  know and love for this codebase. I also got frustrated at the
  Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting
  huge chunks of it that were never even being used.

  Full details of everything is in the shortlog.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits)
  staging: rtlwifi: remove redundant initialization of 'cfg_cmd'
  staging: rtl8723bs: remove a couple of redundant initializations
  staging: comedi: reformat lines to 80 chars or less
  staging: lustre: separate a connection destroy from free struct kib_conn
  Staging: rtl8723bs: Use !x instead of NULL comparison
  Staging: rtl8723bs: Remove dead code
  Staging: rtl8723bs: Change names to conform to the kernel code
  staging: ccree: Fix missing blank line after declaration
  staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd'
  staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST
  staging: fbtft: remove unused FB_TFT_SSD1325 kconfig
  staging: comedi: dt2811: remove redundant initialization of 'ns'
  staging: wilc1000: fix alignments to match open parenthesis
  staging: wilc1000: removed unnecessary defined enums typedef
  staging: wilc1000: remove unnecessary use of parentheses
  staging: rtl8192u: remove redundant initialization of 'timeout'
  staging: sm750fb: fix CamelCase for dispSet var
  staging: lustre: lnet/selftest: fix compile error on UP build
  staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons
  staging: rts5208: Fix "seg_no" calculation in reset_ms_card()
  ...

6 files changed, 63 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index f413e82c8b83..1e6ee3deb4fa 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -15,7 +15,6 @@ Required properties:
 			- "clkin" for the reference clock (typically XTAL)
 			- "core" for the SAR ADC core clock
 		optional clocks:
-			- "sana" for the analog clock
 			- "adc_clk" for the ADC (sampling) clock
 			- "adc_sel" for the ADC (sampling) clock mux
 - vref-supply:	the regulator supply for the ADC reference voltage
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
index 674e133b7cd7..034fc2ba100e 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
@@ -8,6 +8,7 @@ Required properties:
 - reg: memory window mapping address and length
 - clocks: Input clock used to derive the sample clock. Expected to be the
           SoC's APB clock.
+- resets: Reset controller phandle
 - #io-channel-cells: Must be set to <1> to indicate channels are selected
                      by index.
 
@@ -15,6 +16,7 @@ Example:
 	adc@1e6e9000 {
 		compatible = "aspeed,ast2400-adc";
 		reg = <0x1e6e9000 0xb0>;
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_ADC>;
 		#io-channel-cells = <1>;
 	};
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 552e7a83951d..6469a4cd2a6d 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -17,6 +17,11 @@ Required properties:
   This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
   IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
 
+Optional properties:
+  - dmas: Phandle to dma channel for the ADC.
+  - dma-names: Must be "rx" when dmas property is being used.
+  See ../../dma/dma.txt for details.
+
 Example:
 
 adc: adc@fc030000 {
@@ -31,4 +36,6 @@ adc: adc@fc030000 {
 	vddana-supply = <&vdd_3v3_lp_reg>;
 	vref-supply = <&vdd_3v3_lp_reg>;
 	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+	dma-names = "rx";
 }
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 48bfcaa3ffcd..e8bb8243e92c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -62,6 +62,15 @@ Required properties:
 - st,adc-channels: List of single-ended channels muxed for this ADC.
   It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered
   from 0 to 15 or 19 (resp. for in0..in15 or in0..in19).
+- st,adc-diff-channels: List of differential channels muxed for this ADC.
+  Depending on part used, some channels can be configured as differential
+  instead of single-ended (e.g. stm32h7). List here positive and negative
+  inputs pairs as <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered
+  from 0 to 19 on stm32h7)
+  Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required.
+  Both properties can be used together. Some channels can be used as
+  single-ended and some other ones as differential (mixed). But channels
+  can't be configured both as single-ended and differential (invalid).
 - #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
   Documentation/devicetree/bindings/iio/iio-bindings.txt
 
@@ -111,3 +120,18 @@ Example:
 		...
 		other adc child nodes follow...
 	};
+
+Example to setup:
+- channel 1 as single-ended
+- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
+
+	adc: adc@40022000 {
+		compatible = "st,stm32h7-adc-core";
+		...
+		adc1: adc@0 {
+			compatible = "st,stm32h7-adc";
+			...
+			st,adc-channels = <1>;
+			st,adc-diff-channels = <2 6>, <3 7>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index 8629c18b0e78..ef2ca0a0306f 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -1,9 +1,11 @@
 Maxim MAX30102 heart rate and pulse oximeter sensor
+Maxim MAX30105 optical particle-sensing module
 
 * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
+* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
 
 Required properties:
-  - compatible: must be "maxim,max30102"
+  - compatible: must be "maxim,max30102" or "maxim,max30105"
   - reg: the I2C address of the sensor
   - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts: the sole interrupt generated by the device
@@ -12,8 +14,10 @@ Required properties:
   interrupt client node bindings.
 
 Optional properties:
-  - maxim,red-led-current-microamp: configuration for RED LED current
+  - maxim,red-led-current-microamp: configuration for red LED current
   - maxim,ir-led-current-microamp: configuration for IR LED current
+  - maxim,green-led-current-microamp: configuration for green LED current
+    (max30105 only)
 
     Note that each step is approximately 200 microamps, ranging from 0 uA to
     50800 uA.
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
new file mode 100644
index 000000000000..3041207e3f3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt
@@ -0,0 +1,23 @@
+* ST UVIS25 uv sensor
+
+Required properties:
+- compatible: should be "st,uvis25"
+- reg: i2c address of the sensor / spi cs line
+
+Optional properties:
+- interrupt-parent: should be the phandle for the interrupt controller
+- interrupts: interrupt mapping for IRQ. It should be configured with
+  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
+  IRQ_TYPE_EDGE_FALLING.
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt
+  client node bindings.
+
+Example:
+
+uvis25@47 {
+	compatible = "st,uvis25";
+	reg = <0x47>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+};