Merge tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New driver for AXI fan control

 - Attenuator bypass support and support for inverting pwm output in
   adt7475 driver

 - Support for new power supply version in ibm-cffps driver

 - PMBus drivers:

     * support for multi-phase chips

     * ltc2978 driver: add support for LTC2972, LTC2979, LTC3884,
       LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and
       LTM4700/

     * tps53679 driver: add support for TPS53681, TPS53647, and TPS53667

     * isl68137 driver: support for various 2nd Gen Renesas digital
       multiphase chips added to isl68137 driver

 - Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem,
   and k10temp drivers

* tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits)
  docs: hwmon: Update documentation for isl68137 pmbus driver
  hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase
  hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
  hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes
  hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow
  hwmon: (adt7475) Add support for inverting pwm output
  hwmon: (adt7475) Add attenuator bypass support
  dt-bindings: hwmon: Document adt7475 pwm-active-state property
  dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  dt-bindings: hwmon: Document adt7475 binding
  hwmon: (lm73) Add support for of_match_table
  dt-bindings: Add TI LM73 as a trivial device
  hwmon: (pmbus/tps53679) Add documentation
  hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
  hwmon: (pmbus/tps53679) Add support for TPS53681
  hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
  hwmon: (pmbus/tps53679) Add support for multiple chips IDs
  hwmon: (pmbus) Implement multi-phase support
  hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support
  hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions
  ...

4 files changed, 166 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
new file mode 100644
index 000000000000..57a240d2d026
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI FAN Control Device Tree Bindings
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |+
+  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
+  core can be found in:
+
+  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
+
+properties:
+  compatible:
+    enum:
+        - adi,axi-fan-control-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Value specifying the number of pulses per revolution of the controlled
+      FAN.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - pulses-per-revolution
+
+examples:
+  - |
+    fpga_axi: fpga-axi@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x1>;
+
+            axi_fan_control: axi-fan-control@80000000 {
+                    compatible = "adi,axi-fan-control-1.00.a";
+                    reg = <0x0 0x80000000 0x10000>;
+                    clocks = <&clk 71>;
+                    interrupts = <0 110 0>;
+                    pulses-per-revolution = <2>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 000000000000..76985034ea73
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+
+description: |
+  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+  PWN fan controllers.
+
+  They support monitoring and controlling up to four fans (the ADT7490 can only
+  control up to three). They support reading a single on chip temperature
+  sensor and two off chip temperature sensors (the ADT7490 additionally
+  supports measuring up to three current external temperature sensors with
+  series resistance cancellation (SRC)).
+
+  Datasheets:
+  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+  Description taken from onsemiconductors specification sheets, with minor
+  rephrasing.
+
+properties:
+  compatible:
+    enum:
+      - adi,adt7473
+      - adi,adt7475
+      - adi,adt7476
+      - adi,adt7490
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    allOf:
+     - $ref: /schemas/types.yaml#/definitions/uint32
+     - enum: [0, 1]
+
+  "^adi,pwm-active-state$":
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 3
+        maxItems: 3
+        items:
+          enum: [0, 1]
+          default: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hwmon@2e {
+        compatible = "adi,adt7476";
+        reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index b428a70a7cc0..4e7f6215a453 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -2,20 +2,30 @@ ltc2978
 
 Required properties:
 - compatible: should contain one of:
+  * "lltc,ltc2972"
   * "lltc,ltc2974"
   * "lltc,ltc2975"
   * "lltc,ltc2977"
   * "lltc,ltc2978"
+  * "lltc,ltc2979"
   * "lltc,ltc2980"
   * "lltc,ltc3880"
   * "lltc,ltc3882"
   * "lltc,ltc3883"
+  * "lltc,ltc3884"
   * "lltc,ltc3886"
   * "lltc,ltc3887"
+  * "lltc,ltc3889"
+  * "lltc,ltc7880"
   * "lltc,ltm2987"
+  * "lltc,ltm4664"
   * "lltc,ltm4675"
   * "lltc,ltm4676"
+  * "lltc,ltm4677"
+  * "lltc,ltm4678"
+  * "lltc,ltm4680"
   * "lltc,ltm4686"
+  * "lltc,ltm4700"
 - reg: I2C slave address
 
 Optional properties:
@@ -25,13 +35,17 @@ Optional properties:
   standard binding for regulators; see regulator.txt.
 
 Valid names of regulators depend on number of supplies supported per device:
+  * ltc2972 vout0 - vout1
   * ltc2974, ltc2975 : vout0 - vout3
-  * ltc2977, ltc2980, ltm2987 : vout0 - vout7
+  * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
   * ltc2978 : vout0 - vout7
-  * ltc3880, ltc3882, ltc3886 : vout0 - vout1
+  * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+  * ltc7880 : vout0 - vout1
   * ltc3883 : vout0
-  * ltm4676 : vout0 - vout1
-  * ltm4686 : vout0 - vout1
+  * ltm4664 : vout0 - vout1
+  * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+  * ltm4680, ltm4686 : vout0 - vout1
+  * ltm4700 : vout0 - vout1
 
 Example:
 ltc2978@5e {
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 978de7d37c66..330cab25cc92 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -34,14 +34,6 @@ properties:
           - adi,adt7461
             # +/-1C TDM Extended Temp Range I.C
           - adt7461
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7473
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7475
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7476
-            # +/-1C TDM Extended Temp Range I.C
-          - adi,adt7490
             # Three-Axis Digital Accelerometer
           - adi,adxl345
             # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
@@ -350,6 +342,8 @@ properties:
           - ti,ads7830
             # Temperature Monitoring and Fan Control
           - ti,amc6821
+            # Temperature sensor with 2-wire interface
+          - ti,lm73
             # Temperature sensor with integrated fan control
           - ti,lm96000
             # I2C Touch-Screen Controller