Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This was a relatively calm development cycle. Most of changes are
  rather small device-specific fixes and enhancements. The only
  significant changes in ALSA core are code refactoring with the recent
  cleanup infrastructure, which should bring no functionality changes.
  Some highlights below:

  Core:
   - Lots of cleanups in ALSA core code with automatic kfree cleanup and
     locking guard macros
   - New ALSA core kunit test

  ASoC:
   - SoundWire support for AMD ACP 6.3 systems
   - Support for reporting version information for AVS firmware
   - Support DSPless mode for Intel Soundwire systems
   - Support for configuring CS35L56 amplifiers using EFI calibration
     data
   - Log which component is being operated on as part of power
     management trace events.
   - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

  HD- and USB-audio:
   - More Cirrus HD-audio codec support
   - TAS2781 HD-audio codec fixes
   - Scarlett2 mixer fixes

  Others:
   - Enhancement of virtio driver for audio control supports
   - Cleanups of legacy PM code with new macros
   - Firewire sound updates"

* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
  ALSA: usb-audio: Stop parsing channels bits when all channels are found.
  ALSA: hda/tas2781: remove unnecessary runtime_pm calls
  ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
  ALSA: aaci: Delete unused variable in aaci_do_suspend
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
  ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
  ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
  ALSA: hda/tas2781: restore power state after system_resume
  ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
  ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
  ALSA: hda/tas2781: add lock to system_suspend
  ALSA: hda/tas2781: use dev_dbg in system_resume
  ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
  platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
  ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: Intel: catpt: Carefully use PCI bitwise constants
  ALSA: hda: hda_component: Include sound/hda_codec.h
  ALSA: hda: hda_component: Add missing #include guards
  ...

24 files changed, 681 insertions, 293 deletions

diff --git a/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml
new file mode 100644
index 000000000000..89a67f8e33b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,asoc-wm8904.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel wm8904 audio codec complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The ASoC audio complex configuration for Atmel with WM8904 audio codec.
+
+properties:
+  compatible:
+    const: atmel,asoc-wm8904
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+        - Mic
+        # WM8904 CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - MICBIAS
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,audio-routing
+  - atmel,ssc-controller
+  - atmel,audio-codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,asoc-wm8904";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+        atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "HPOUTL",
+                "Headphone Jack", "HPOUTR",
+                "IN2L", "Line In Jack",
+                "IN2R", "Line In Jack",
+                "Mic", "MICBIAS",
+                "IN1L", "Mic";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8904>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml
new file mode 100644
index 000000000000..33717b728f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sam9x5-wm8731-audio.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel at91sam9x5ek wm8731 audio complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec.
+
+properties:
+  compatible:
+    const: atmel,sam9x5-wm8731-audio
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+
+        # CODEC Pins
+        - LOUT
+        - ROUT
+        - LHPOUT
+        - RHPOUT
+        - LLINEIN
+        - RLINEIN
+        - MICIN
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,ssc-controller
+  - atmel,audio-codec
+  - atmel,audio-routing
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,sam9x5-wm8731-audio";
+
+        atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "RHPOUT",
+                "Headphone Jack", "LHPOUT",
+                "LLINEIN", "Line In Jack",
+                "RLINEIN", "Line In Jack";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8731>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
index 43d04702ac2d..ae3162fcfe02 100644
--- a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -18,7 +18,12 @@ description:
 
 properties:
   compatible:
-    const: atmel,sama5d2-classd
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-classd
+      - items:
+          - const: microchip,sam9x7-classd
+          - const: atmel,sama5d2-classd
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
deleted file mode 100644
index 8facbce53db8..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Atmel at91sam9x5ek wm8731 audio complex
-
-Required properties:
-  - compatible: "atmel,sam9x5-wm8731-audio"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8731 audio codec
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source.
-
-Available audio endpoints for the audio-routing table:
-
-Board connectors:
- * Headphone Jack
- * Line In Jack
-
-wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
-
-Example:
-sound {
-	compatible = "atmel,sam9x5-wm8731-audio";
-
-	atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "RHPOUT",
-		"Headphone Jack", "LHPOUT",
-		"LLINEIN", "Line In Jack",
-		"RLINEIN", "Line In Jack";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8731>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
deleted file mode 100644
index 8bbe50c884b6..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Atmel ASoC driver with wm8904 audio codec complex
-
-Required properties:
-  - compatible: "atmel,asoc-wm8904"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source. Valid names for sources and
-    sinks are the WM8904's pins, and the jacks on the board:
-
-    WM8904 pins:
-
-    * IN1L
-    * IN1R
-    * IN2L
-    * IN2R
-    * IN3L
-    * IN3R
-    * HPOUTL
-    * HPOUTR
-    * LINEOUTL
-    * LINEOUTR
-    * MICBIAS
-
-    Board connectors:
-
-    * Headphone Jack
-    * Line In Jack
-    * Mic
-
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8904 audio codec
-
-Optional properties:
-  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
-
-Example:
-sound {
-	compatible = "atmel,asoc-wm8904";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-	atmel,model = "wm8904 @ AT91SAM9N12EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "HPOUTL",
-		"Headphone Jack", "HPOUTR",
-		"IN2L", "Line In Jack",
-		"IN2R", "Line In Jack",
-		"Mic", "MICBIAS",
-		"IN1L", "Mic";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8904>;
-};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index b13c08de505e..28b27e7e45de 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -51,7 +51,7 @@ definitions:
           - $ref: /schemas/types.yaml#/definitions/phandle
       clocks:
         description: Indicates system clock
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
       system-clock-frequency:
         $ref: simple-card.yaml#/definitions/system-clock-frequency
       system-clock-direction-out:
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 4c9acb8d4c4c..70f6c62aedca 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -25,6 +25,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
index 07781408e788..8c82d47375ec 100644
--- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
@@ -38,6 +38,7 @@ properties:
     default: 0x0f
 
   everest,mic1-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset plugged.
@@ -46,6 +47,7 @@ properties:
     default: 0x22
 
   everest,mic2-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset unplugged.
@@ -87,7 +89,7 @@ properties:
        0 means the chip detect jack type again after button released.
     minimum: 0
     maximum: 0x7f
-    default: 0x45
+    default: 0x00
 
 required:
   - compatible
@@ -107,10 +109,8 @@ examples:
         clocks = <&clks 10>;
         clock-names = "mclk";
         #sound-dai-cells = <0>;
-        everest,mic1-src = [22];
-        everest,mic2-src = [44];
         everest,jack-pol = [0e];
         everest,interrupt-src = [08];
-        everest,interrupt-clk = [45];
+        everest,interrupt-clk = [00];
       };
     };
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8a7f78..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-asrc",
-			  "fsl,imx53-asrc",
-			  "fsl,imx8qm-asrc",
-			  "fsl,imx8qxp-asrc",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Contains the following entries
-	"mem"		  Peripheral access clock to access registers.
-	"ipg"		  Peripheral clock to driver module.
-	"asrck_<0-f>"	  Clock sources for input and output clock.
-	"spba"		  The spba clock is required when ASRC is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
-
-   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
-
-   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
-			  by imx8qm/imx8qxp platform
-			  <0> - select the map for asrc0 in imx8qm/imx8qxp
-			  <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
-   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
-			  Ends, which can replace the fsl,asrc-width.
-			  The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc@2034000 {
-	compatible = "fsl,imx53-asrc";
-	reg = <0x02034000 0x4000>;
-	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 107>, <&clks 0>, <&clks 0>;
-	clock-names = "mem", "ipg", "asrck0",
-		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-		"asrck_d", "asrck_e", "asrck_f";
-	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-	dma-names = "rxa", "rxb", "rxc",
-		"txa", "txb", "txc";
-	fsl,asrc-rate  = <48000>;
-	fsl,asrc-width = <16>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
index a680d7aff237..0782f3f9947f 100644
--- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -51,8 +51,8 @@ properties:
       - const: ctx3_tx
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
-    const: imx/easrc/easrc-imx8mn.bin
+    items:
+      - const: imx/easrc/easrc-imx8mn.bin
     description: The coefficient table for the filters
 
   fsl,asrc-rate:
diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 000000000000..bfef2fcb75b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+  a signal associated with an input clock into a signal associated with a
+  different output clock. The driver currently works as a Front End of DPCM
+  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+  three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx35-asrc
+          - fsl,imx53-asrc
+          - fsl,imx8qm-asrc
+          - fsl,imx8qxp-asrc
+      - items:
+          - enum:
+              - fsl,imx6sx-asrc
+              - fsl,imx6ul-asrc
+          - const: fsl,imx53-asrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 6
+
+  dma-names:
+    items:
+      - const: rxa
+      - const: rxb
+      - const: rxc
+      - const: txa
+      - const: txb
+      - const: txc
+
+  clocks:
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: mem
+      - const: ipg
+      - const: asrck_0
+      - const: asrck_1
+      - const: asrck_2
+      - const: asrck_3
+      - const: asrck_4
+      - const: asrck_5
+      - const: asrck_6
+      - const: asrck_7
+      - const: asrck_8
+      - const: asrck_9
+      - const: asrck_a
+      - const: asrck_b
+      - const: asrck_c
+      - const: asrck_d
+      - const: asrck_e
+      - const: asrck_f
+      - const: spba
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample width used by DPCM Back Ends
+    enum: [16, 24]
+
+  fsl,asrc-clk-map:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines clock map used in driver
+      <0> - select the map for asrc0 in imx8qm/imx8qxp
+      <1> - select the map for asrc1 in imx8qm/imx8qxp
+    enum: [0, 1]
+
+  big-endian:
+    type: boolean
+    description:
+      If this property is absent, the little endian mode will be in use as
+      default. Otherwise, the big endian mode will be in use for all the
+      device registers.
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines a mutual sample format used by DPCM Back Ends, which can
+      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+    enum: [2, 6]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - fsl,asrc-rate
+  - fsl,asrc-width
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - fsl,asrc-clk-map
+    else:
+      properties:
+        fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    asrc: asrc@2034000 {
+        compatible = "fsl,imx53-asrc";
+        reg = <0x02034000 0x4000>;
+        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_SPBA>;
+        clock-names = "mem", "ipg", "asrck_0",
+                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                "asrck_d", "asrck_e", "asrck_f", "spba";
+        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+        dma-names = "rxa", "rxb", "rxc",
+                    "txa", "txb", "txc";
+        fsl,asrc-rate  = <48000>;
+        fsl,asrc-width = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
index b7e605835639..c1e9803fc113 100644
--- a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -15,10 +15,16 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mm-micfil
-      - fsl,imx8mp-micfil
-      - fsl,imx93-micfil
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx95-micfil
+          - const: fsl,imx93-micfil
+
+      - enum:
+          - fsl,imx8mm-micfil
+          - fsl,imx8mp-micfil
+          - fsl,imx93-micfil
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
index 088c26b001cc..2456d958adee 100644
--- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -39,6 +39,7 @@ properties:
               - fsl,imx8qm-sai
               - fsl,imx8ulp-sai
               - fsl,imx93-sai
+              - fsl,imx95-sai
               - fsl,vf610-sai
 
   reg:
@@ -75,12 +76,17 @@ properties:
           - const: pll11k
         minItems: 4
 
+  power-domains:
+    maxItems: 1
+
   dmas:
+    minItems: 1
     items:
       - description: DMA controller phandle and request line for RX
       - description: DMA controller phandle and request line for TX
 
   dma-names:
+    minItems: 1
     items:
       - const: rx
       - const: tx
diff --git a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
index 66993d378aaf..5e11ce2c13ac 100644
--- a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
+++ b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
@@ -51,7 +51,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Filters coefficients file to load. If this property is omitted, internal
       filters are disabled.
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
index 651f61c7c25a..fb630a184350 100644
--- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -24,9 +24,14 @@ properties:
     const: 0
 
   compatible:
-    enum:
-      - microchip,sam9x60-i2smcc
-      - microchip,sama7g5-i2smcc
+    oneOf:
+      - enum:
+          - microchip,sam9x60-i2smcc
+          - microchip,sama7g5-i2smcc
+      - items:
+          - enum:
+              - microchip,sam9x7-i2smcc
+          - const: microchip,sam9x60-i2smcc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index 6f419747273e..2ab6871e89e5 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -107,7 +107,7 @@ patternProperties:
         properties:
           sound-dai:
             minItems: 1
-            maxItems: 4
+            maxItems: 8
 
     required:
       - link-name
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index adbfa67f88ed..cf6c3787adfe 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -15,6 +15,7 @@ description: |
 
 allOf:
   - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
 
 properties:
   compatible:
@@ -22,92 +23,12 @@ properties:
       - qcom,wcd9380-codec
       - qcom,wcd9385-codec
 
-  reset-gpios:
-    description: GPIO spec for reset line to use
-    maxItems: 1
-
   us-euro-gpios:
     description: GPIO spec for swapping gnd and mic segments
     maxItems: 1
 
-  vdd-buck-supply:
-    description: A reference to the 1.8V buck supply
-
-  vdd-rxtx-supply:
-    description: A reference to the 1.8V rx supply
-
-  vdd-io-supply:
-    description: A reference to the 1.8V I/O supply
-
-  vdd-mic-bias-supply:
-    description: A reference to the 3.8V mic bias supply
-
-  qcom,tx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire tx device phandle
-
-  qcom,rx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire rx device phandle
-
-  qcom,micbias1-microvolt:
-    description: micbias1 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias2-microvolt:
-    description: micbias2 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias3-microvolt:
-    description: micbias3 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias4-microvolt:
-    description: micbias4 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,hphl-jack-type-normally-closed:
-    description: Indicates that HPHL jack switch type is normally closed
-    type: boolean
-
-  qcom,ground-jack-type-normally-closed:
-    description: Indicates that Headset Ground switch type is normally closed
-    type: boolean
-
-  qcom,mbhc-headset-vthreshold-microvolt:
-    description: Voltage threshold value for headset detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-headphone-vthreshold-microvolt:
-    description: Voltage threshold value for headphone detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-buttons-vthreshold-microvolt:
-    description:
-      Array of 8 Voltage threshold values corresponding to headset
-      button0 - button7
-    minItems: 8
-    maxItems: 8
-
-  '#sound-dai-cells':
-    const: 1
-
 required:
   - compatible
-  - reset-gpios
-  - qcom,tx-device
-  - qcom,rx-device
-  - qcom,micbias1-microvolt
-  - qcom,micbias2-microvolt
-  - qcom,micbias3-microvolt
-  - qcom,micbias4-microvolt
-  - "#sound-dai-cells"
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
new file mode 100644
index 000000000000..67ed7701b5d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire devices on WCD9390/WCD9395
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices. This bindings is for the devices.
+
+properties:
+  compatible:
+    const: sdw20217010e00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host tx ports.
+      In the order of the device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host rx ports.
+      In the order of device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
new file mode 100644
index 000000000000..6e76f6a8634f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices.
+  The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
+  subsystems are external to the IC, thus requiring DT port-endpoint graph description
+  to handle USB-C altmode & orientation switching for Audio Accessory Mode.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-codec
+      - items:
+          - const: qcom,wcd9395-codec
+          - const: qcom,wcd9390-codec
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the WCD939x Codec node to USB MUX subsystems for the
+      purpose of handling altmode muxing and orientation switching to detect and
+      enable Audio Accessory Mode.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    codec {
+        compatible = "qcom,wcd9390-codec";
+        reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd939x_tx>;
+        qcom,rx-device = <&wcd939x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd939x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
new file mode 100644
index 000000000000..f78ba148ad25
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Qualcomm WCD93xx Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
index d717017b0fdb..22798d22d981 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -28,6 +28,10 @@ properties:
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 0
 
@@ -37,11 +41,16 @@ properties:
 required:
   - compatible
   - reg
-  - powerdown-gpios
   - '#sound-dai-cells'
   - vdd-1p8-supply
   - vdd-io-supply
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
new file mode 100644
index 000000000000..880196081a60
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1015 Mono Class D Audio Amplifier
+
+maintainers:
+  - Jack Yu <jack.yu@realtek.com>
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015
+
+  reg:
+    maxItems: 1
+
+  realtek,power-up-delay-ms:
+    description: Set a delay time for flush work to be completed,
+      this vlaue is adjustable depending on platform.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@28 {
+            compatible = "realtek,rt1015";
+            reg = <0x28>;
+            realtek,power-up-delay-ms = <50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
deleted file mode 100644
index e498966d436f..000000000000
--- a/Documentation/devicetree/bindings/sound/rt1015.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-RT1015 Mono Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1015".
-
-- reg : The I2C address of the device.
-
-Optional properties:
-
-- realtek,power-up-delay-ms
-  Set a delay time for flush work to be completed,
-  this value is adjustable depending on platform.
-
-Example:
-
-rt1015: codec@28 {
-	compatible = "realtek,rt1015";
-	reg = <0x28>;
-	realtek,power-up-delay-ms = <50>;
-};
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
index 760592599143..cbc7ba37362a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -25,8 +25,11 @@ properties:
     description: Phandles to the codecs.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: Phandle to the WM5110 audio codec.
-      - description: Phandle to the HDMI transmitter node.
+      - items:
+          - description: Phandle to the WM5110 audio codec.
+      - items:
+          - description: Phandle to the HDMI transmitter node.
+
 
   samsung,audio-routing:
     description: |