Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.7-rc1. Included in here are:

   - IIO subsystem driver updates and additions (largest part of this
     pull request)

   - FPGA subsystem driver updates

   - Counter subsystem driver updates

   - ICC subsystem driver updates

   - extcon subsystem driver updates

   - mei driver updates and additions

   - nvmem subsystem driver updates and additions

   - comedi subsystem dependency fixes

   - parport driver fixups

   - cdx subsystem driver and core updates

   - splice support for /dev/zero and /dev/full

   - other smaller driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
  cdx: add sysfs for subsystem, class and revision
  cdx: add sysfs for bus reset
  cdx: add support for bus enable and disable
  cdx: Register cdx bus as a device on cdx subsystem
  cdx: Create symbol namespaces for cdx subsystem
  cdx: Introduce lock to protect controller ops
  cdx: Remove cdx controller list from cdx bus system
  dts: ti: k3-am625-beagleplay: Add beaglecc1352
  greybus: Add BeaglePlay Linux Driver
  dt-bindings: net: Add ti,cc1352p7
  dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
  dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
  Revert "nvmem: add new config option"
  MAINTAINERS: coresight: Add missing Coresight files
  misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
  firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
  uacce: make uacce_class constant
  ocxl: make ocxl_class constant
  cxl: make cxl_class constant
  misc: phantom: make phantom_class constant
  ...

44 files changed, 1161 insertions, 317 deletions

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 98139489d4b5..bfff71ff3d6a 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: /schemas/nvmem/nvmem.yaml
+  - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml
 
 select:
   properties:
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..66ea894dbe55 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,23 @@
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting
+  +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a
+  hardware-fifo buffering. These accelerometers can be accessed either
+  via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
+      - rohm,kx132acr-lbz
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index 875f394576c2..5cc6a9684077 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -4,21 +4,31 @@
 $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Linear Technology / Analog Devices LTC2497 ADC
+title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
+  - Liam Beguin <liambeguin@gmail.com>
 
 description: |
-  16bit ADC supporting up to 16 single ended or 8 differential inputs.
-  I2C interface.
+  LTC2309:
+    low noise, low power, 8-channel, 12-bit successive approximation ADC with an
+    I2C compatible serial interface.
 
-  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
-  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf
+
+  LTC2497:
+  LTC2499:
+    16bit ADC supporting up to 16 single ended or 8 differential inputs.
+    I2C interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
 
 properties:
   compatible:
     enum:
+      - lltc,ltc2309
       - lltc,ltc2497
       - lltc,ltc2499
 
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
new file mode 100644
index 000000000000..675319276197
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP346X and MCP356X ADC Family
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
+  Delta-Sigma ADCs with an SPI interface. Datasheet can be found here:
+  Datasheet for MCP3561, MCP3562, MCP3564 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf
+  Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf
+  Datasheet for MCP3461, MCP3462, MCP3464 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf
+  Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3461
+      - microchip,mcp3462
+      - microchip,mcp3464
+      - microchip,mcp3461r
+      - microchip,mcp3462r
+      - microchip,mcp3464r
+      - microchip,mcp3561
+      - microchip,mcp3562
+      - microchip,mcp3564
+      - microchip,mcp3561r
+      - microchip,mcp3562r
+      - microchip,mcp3564r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  vdd-supply: true
+
+  avdd-supply: true
+
+  clocks:
+    description:
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  drive-open-drain:
+    description:
+      Whether to drive the IRQ signal as push-pull (default) or open-drain. Note
+      that the device requires this pin to become "high", otherwise it will stop
+      converting.
+    type: boolean
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different
+      pin to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. mcp3564r). In
+      case of "r" devices (e. g. mcp3564r), if it does not exists the internal
+      reference will be used.
+
+  microchip,hw-device-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description:
+      The address is set on a per-device basis by fuses in the factory,
+      configured on request. If not requested, the fuses are set for 0x1.
+      The device address is part of the device markings to avoid
+      potential confusion. This address is coded on two bits, so four possible
+      addresses are available when multiple devices are present on the same
+      SPI bus with only one Chip Select line for all devices.
+      Each device communication starts by a CS falling edge, followed by the
+      clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE
+      which is first one on the wire).
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|([1-7][0-9]))$":
+    $ref: adc.yaml
+    type: object
+    unevaluatedProperties: false
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended and differential mode.
+        minimum: 0
+        maximum: 79
+
+    required:
+      - reg
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - microchip,hw-device-address
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # External vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp3461
+              - microchip,mcp3462
+              - microchip,mcp3464
+              - microchip,mcp3561
+              - microchip,mcp3562
+              - microchip,mcp3564
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3564r";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <10000000>;
+            microchip,hw-device-address = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                /* CH0 to AGND */
+                reg = <0>;
+                label = "CH0";
+            };
+
+            channel@1 {
+                /* CH1 to AGND */
+                reg = <1>;
+                label = "CH1";
+            };
+
+            /* diff-channels */
+            channel@11 {
+                reg = <11>;
+
+                /* CN0, CN1 */
+                diff-channels = <0 1>;
+                label = "CH0_CH1";
+            };
+
+            channel@22 {
+                reg = <0x22>;
+
+                /* CN1, CN2 */
+                diff-channels = <1 2>;
+                label = "CH1_CH3";
+            };
+
+            channel@23 {
+                reg = <0x23>;
+
+                /* CN1, CN3 */
+                diff-channels = <1 3>;
+                label = "CH1_CH3";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index f7b3fde4115a..06951ec5f5da 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -18,7 +18,13 @@ description: |
 properties:
   compatible:
     enum:
+      - microchip,mcp3910
       - microchip,mcp3911
+      - microchip,mcp3912
+      - microchip,mcp3913
+      - microchip,mcp3914
+      - microchip,mcp3918
+      - microchip,mcp3919
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index e004659099c1..d605999ffe28 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -23,6 +23,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml
new file mode 100644
index 000000000000..e779a8986e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPADC subsystem in the TWL6030 power module
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The GPADC subsystem in the TWL603X consists of a 10-bit ADC
+  combined with a 15-input analog multiplexer in the TWL6030 resp. a
+  19-input analog muliplexer in the TWL6032.
+
+properties:
+  compatible:
+    enum:
+      - ti,twl6030-gpadc
+      - ti,twl6032-gpadc
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpadc {
+        compatible = "ti,twl6030-gpadc";
+        interrupts = <3>;
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 9fda56fa49c3..2ee6080deac7 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -4,20 +4,26 @@
 $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: HMC425A 6-bit Digital Step Attenuator
+title: Analog Devices HMC425A and similar Digital Step Attenuators
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
-  Digital Step Attenuator IIO device with gpio interface.
+  Digital Step Attenuator IIO devices with gpio interface.
+  Offer various frequency and attenuation ranges.
   HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
-  https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+
+  HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
+
 
 properties:
   compatible:
     enum:
       - adi,hmc425a
+      - adi,hmc540s
 
   vcc-supply: true
 
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 1db6952ddca5..297b8a1a7ffb 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -48,6 +48,11 @@ properties:
 
   mount-matrix: true
 
+  invensense,level-shifter:
+    type: boolean
+    description: |
+      From ancient platform data struct: false: VLogic, true: VDD
+
   i2c-gate:
     $ref: /schemas/i2c/i2c-controller.yaml
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index ee8724ad33ab..28b667a9cb76 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -93,6 +93,9 @@ properties:
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
 
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml
new file mode 100644
index 000000000000..7c4ca6322bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BM1390 pressure sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description:
+  BM1390GLV-Z is a pressure sensor which performs internal temperature
+  compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa
+  and sample averaging and IIR filtering is built in. Temperature
+  measurement is also supported.
+
+properties:
+  compatible:
+    const: rohm,bm1390glv-z
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure-sensor@5d {
+            compatible = "rohm,bm1390glv-z";
+            reg = <0x5d>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml
new file mode 100644
index 000000000000..8980b3cd8337
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2S1210 Resolver-to-Digital Converter
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The AD2S1210 is a complete 10-bit to 16-bit resolution tracking
+  resolver-to-digital converter, integrating an on-board programmable
+  sinusoidal oscillator that provides sine wave excitation for
+  resolvers.
+
+  The AD2S1210 allows the user to read the angular position or the
+  angular velocity data directly from the parallel outputs or through
+  the serial interface.
+
+  The mode of operation of the communication channel (parallel or serial) is
+  selected by the A0 and A1 input pins. In normal mode, data is latched by
+  toggling the SAMPLE line and can then be read directly. In configuration mode,
+  data is read or written using a register access scheme (address byte with
+  read/write flag and data byte).
+
+    A1  A0  Result
+     0   0  Normal mode - position output
+     0   1  Normal mode - velocity output
+     1   0  Reserved
+     1   1  Configuration mode
+
+  In normal mode, the resolution of the digital output is selected using
+  the RES0 and RES1 input pins. In configuration mode, the resolution is
+  selected by setting the RES0 and RES1 bits in the control register.
+
+  RES1  RES0  Resolution (Bits)
+     0     0  10
+     0     1  12
+     1     0  14
+     1     1  16
+
+  Note on SPI connections: The CS line on the AD2S1210 should hard-wired to
+  logic low and the WR/FSYNC line on the AD2S1210 should be connected to the
+  SPI CSn output of the SPI controller.
+
+  Datasheet:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf
+
+properties:
+  compatible:
+    const: adi,ad2s1210
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  spi-cpha: true
+
+  avdd-supply:
+    description:
+      A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD)
+      pin.
+
+  dvdd-supply:
+    description:
+      A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD)
+      pin.
+
+  vdrive-supply:
+    description:
+      A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input
+      (VDrive) pin.
+
+  clocks:
+    maxItems: 1
+    description: External oscillator clock (CLKIN).
+
+  reset-gpios:
+    description:
+      GPIO connected to the /RESET pin. As the line needs to be low for the
+      reset to be active, it should be configured as GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  sample-gpios:
+    description:
+      GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger
+      a sample, it should be configured as GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  mode-gpios:
+    description:
+      GPIO lines connected to the A0 and A1 pins. These pins select the data
+      transfer mode.
+    minItems: 2
+    maxItems: 2
+
+  resolution-gpios:
+    description:
+      GPIO lines connected to the RES0 and RES1 pins. These pins select the
+      resolution of the digital output. If omitted, it is assumed that the
+      RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits
+      property.
+    minItems: 2
+    maxItems: 2
+
+  fault-gpios:
+    description:
+      GPIO lines connected to the LOT and DOS pins. These pins combined indicate
+      the type of fault present, if any. As these pins a pulled low to indicate
+      a fault condition, they should be configured as GPIO_ACTIVE_LOW.
+    minItems: 2
+    maxItems: 2
+
+  adi,fixed-mode:
+    description:
+      This is used to indicate the selected mode if A0 and A1 are hard-wired
+      instead of connected to GPIOS (i.e. mode-gpios is omitted).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [config, velocity, position]
+
+  assigned-resolution-bits:
+    description:
+      Resolution of the digital output required by the application. This
+      determines the precision of the angle and/or the maximum speed that can
+      be measured. If resolution-gpios is omitted, it is assumed that RES0 and
+      RES1 are hard-wired to match this value.
+    enum: [10, 12, 14, 16]
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - avdd-supply
+  - dvdd-supply
+  - vdrive-supply
+  - clocks
+  - sample-gpios
+  - assigned-resolution-bits
+
+oneOf:
+  - required:
+      - mode-gpios
+  - required:
+      - adi,fixed-mode
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        resolver@0 {
+            compatible = "adi,ad2s1210";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpha;
+            avdd-supply = <&avdd_regulator>;
+            dvdd-supply = <&dvdd_regulator>;
+            vdrive-supply = <&vdrive_regulator>;
+            clocks = <&ext_osc>;
+            sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>;
+            resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>;
+            assigned-resolution-bits = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
new file mode 100644
index 000000000000..fd15ab5014fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8939 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Qualcomm MSM8939 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8939-bimc
+      - qcom,msm8939-pcnoc
+      - qcom,msm8939-snoc
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    $ref: qcom,rpm-common.yaml#
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        const: qcom,msm8939-snoc-mm
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@580000 {
+        compatible = "qcom,msm8939-snoc";
+        reg = <0x00580000 0x14000>;
+        #interconnect-cells = <1>;
+    };
+
+    bimc: interconnect@400000 {
+        compatible = "qcom,msm8939-bimc";
+        reg = <0x00400000 0x62000>;
+        #interconnect-cells = <1>;
+
+          snoc_mm: interconnect-snoc {
+              compatible = "qcom,msm8939-snoc-mm";
+              #interconnect-cells = <1>;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
new file mode 100644
index 000000000000..e3f964aaad1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Qualcomm MSM8996 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-mnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC High-performance Bus Clock.
+
+        clock-names:
+          const: iface
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-a2noc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Aggregate2 NoC UFS AXI Clock
+            - description: UFS AXI Clock
+
+        clock-names:
+          items:
+            - const: aggre2_ufs_axi
+            - const: ufs_axi
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    bimc: interconnect@408000 {
+        compatible = "qcom,msm8996-bimc";
+        reg = <0x00408000 0x5a000>;
+        #interconnect-cells = <1>;
+    };
+
+    a0noc: interconnect@543000 {
+        compatible = "qcom,msm8996-a0noc";
+        reg = <0x00543000 0x6000>;
+        #interconnect-cells = <1>;
+        clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+                 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+                 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+        clock-names = "aggre0_snoc_axi",
+                      "aggre0_cnoc_ahb",
+                      "aggre0_noc_mpu_cfg";
+        power-domains = <&gcc AGGRE0_NOC_GDSC>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
index f65a2fe846de..b6c15314c5c5 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -13,6 +13,9 @@ description: |
   The Qualcomm QCM2290 interconnect providers support adjusting the
   bandwidth requirements between the various NoC fabrics.
 
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
 properties:
   reg:
     maxItems: 1
@@ -23,19 +26,6 @@ properties:
       - qcom,qcm2290-cnoc
       - qcom,qcm2290-snoc
 
-  '#interconnect-cells':
-    const: 1
-
-  clock-names:
-    items:
-      - const: bus
-      - const: bus_a
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
-
 # Child node's properties
 patternProperties:
   '^interconnect-[a-z0-9]+$':
@@ -44,6 +34,9 @@ patternProperties:
       The interconnect providers do not have a separate QoS register space,
       but share parent's space.
 
+    allOf:
+      - $ref: qcom,rpm-common.yaml#
+
     properties:
       compatible:
         enum:
@@ -51,35 +44,16 @@ patternProperties:
           - qcom,qcm2290-mmrt-virt
           - qcom,qcm2290-mmnrt-virt
 
-      '#interconnect-cells':
-        const: 1
-
-      clock-names:
-        items:
-          - const: bus
-          - const: bus_a
-
-      clocks:
-        items:
-          - description: Bus Clock
-          - description: Bus A Clock
-
     required:
       - compatible
-      - '#interconnect-cells'
-      - clock-names
-      - clocks
 
-    additionalProperties: false
+    unevaluatedProperties: false
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -89,32 +63,20 @@ examples:
         compatible = "qcom,qcm2290-snoc";
         reg = <0x01880000 0x60200>;
         #interconnect-cells = <1>;
-        clock-names = "bus", "bus_a";
-        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 
         qup_virt: interconnect-qup {
             compatible = "qcom,qcm2290-qup-virt";
             #interconnect-cells = <1>;
-            clock-names = "bus", "bus_a";
-            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
-                     <&rpmcc RPM_SMD_QUP_A_CLK>;
         };
 
         mmnrt_virt: interconnect-mmnrt {
             compatible = "qcom,qcm2290-mmnrt-virt";
             #interconnect-cells = <1>;
-            clock-names = "bus", "bus_a";
-            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
-                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
         };
 
         mmrt_virt: interconnect-mmrt {
             compatible = "qcom,qcm2290-mmrt-virt";
             #interconnect-cells = <1>;
-            clock-names = "bus", "bus_a";
-            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
-                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
         };
     };
 
@@ -122,16 +84,10 @@ examples:
         compatible = "qcom,qcm2290-cnoc";
         reg = <0x01900000 0x8200>;
         #interconnect-cells = <1>;
-        clock-names = "bus", "bus_a";
-        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
     };
 
     bimc: interconnect@4480000 {
         compatible = "qcom,qcm2290-bimc";
         reg = <0x04480000 0x80000>;
         #interconnect-cells = <1>;
-        clock-names = "bus", "bus_a";
-        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml
new file mode 100644
index 000000000000..1ea52b091609
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  RPM interconnect providers support for managing system bandwidth requirements
+  through manual requests based on either predefined values or as indicated by
+  the bus monitor hardware. Each provider node represents a NoC bus master,
+  driven by a dedicated clock source.
+
+properties:
+  '#interconnect-cells':
+    oneOf:
+      - const: 2
+      - const: 1
+        deprecated: true
+
+required:
+  - '#interconnect-cells'
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 4f95d512012a..08c1c6b9d7cf 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -7,13 +7,16 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm RPM Network-On-Chip Interconnect
 
 maintainers:
-  - Georgi Djakov <georgi.djakov@linaro.org>
+  - Georgi Djakov <djakov@kernel.org>
 
 description: |
   RPM interconnect providers support system bandwidth requirements through
   RPM processor. The provider is able to communicate with the RPM through
   the RPM shared memory device.
 
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
 properties:
   reg:
     maxItems: 1
@@ -23,259 +26,22 @@ properties:
       - qcom,msm8916-bimc
       - qcom,msm8916-pcnoc
       - qcom,msm8916-snoc
-      - qcom,msm8939-bimc
-      - qcom,msm8939-pcnoc
-      - qcom,msm8939-snoc
-      - qcom,msm8996-a0noc
-      - qcom,msm8996-a1noc
-      - qcom,msm8996-a2noc
-      - qcom,msm8996-bimc
-      - qcom,msm8996-cnoc
-      - qcom,msm8996-mnoc
-      - qcom,msm8996-pnoc
-      - qcom,msm8996-snoc
       - qcom,qcs404-bimc
       - qcom,qcs404-pcnoc
       - qcom,qcs404-snoc
-      - qcom,sdm660-a2noc
-      - qcom,sdm660-bimc
-      - qcom,sdm660-cnoc
-      - qcom,sdm660-gnoc
-      - qcom,sdm660-mnoc
-      - qcom,sdm660-snoc
-
-  '#interconnect-cells':
-    description: |
-      Value: <1> is one cell in an interconnect specifier for the
-      interconnect node id, <2> requires the interconnect node id and an
-      extra path tag.
-    enum: [ 1, 2 ]
-
-  clocks:
-    minItems: 2
-    maxItems: 7
-
-  clock-names:
-    minItems: 2
-    maxItems: 7
-
-  power-domains:
-    maxItems: 1
-
-# Child node's properties
-patternProperties:
-  '^interconnect-[a-z0-9]+$':
-    type: object
-    additionalProperties: false
-    description:
-      snoc-mm is a child of snoc, sharing snoc's register address space.
-
-    properties:
-      compatible:
-        enum:
-          - qcom,msm8939-snoc-mm
-
-      '#interconnect-cells':
-        const: 1
-
-      clock-names:
-        items:
-          - const: bus
-          - const: bus_a
-
-      clocks:
-        items:
-          - description: Bus Clock
-          - description: Bus A Clock
-
-    required:
-      - compatible
-      - '#interconnect-cells'
-      - clock-names
-      - clocks
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8916-bimc
-              - qcom,msm8916-pcnoc
-              - qcom,msm8916-snoc
-              - qcom,msm8939-bimc
-              - qcom,msm8939-pcnoc
-              - qcom,msm8939-snoc
-              - qcom,msm8996-a1noc
-              - qcom,msm8996-bimc
-              - qcom,msm8996-cnoc
-              - qcom,msm8996-pnoc
-              - qcom,msm8996-snoc
-              - qcom,qcs404-bimc
-              - qcom,qcs404-pcnoc
-              - qcom,qcs404-snoc
-              - qcom,sdm660-bimc
-              - qcom,sdm660-cnoc
-              - qcom,sdm660-gnoc
-              - qcom,sdm660-snoc
-
-    then:
-      properties:
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-
-        clocks:
-          items:
-            - description: Bus Clock
-            - description: Bus A Clock
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-mnoc
-              - qcom,sdm660-mnoc
-
-    then:
-      properties:
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: iface
-
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: CPU-NoC High-performance Bus Clock.
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-a0noc
-
-    then:
-      properties:
-        clock-names:
-          items:
-            - const: aggre0_snoc_axi
-            - const: aggre0_cnoc_ahb
-            - const: aggre0_noc_mpu_cfg
-
-        clocks:
-          items:
-            - description: Aggregate0 System NoC AXI Clock.
-            - description: Aggregate0 Config NoC AHB Clock.
-            - description: Aggregate0 NoC MPU Clock.
-
-      required:
-        - power-domains
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-a2noc
-
-    then:
-      properties:
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: aggre2_ufs_axi
-            - const: ufs_axi
-
-        clocks:
-          items:
-            - description: Bus Clock
-            - description: Bus A Clock
-            - description: Aggregate2 NoC UFS AXI Clock
-            - description: UFS AXI Clock
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-a2noc
-
-    then:
-      properties:
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: ipa
-            - const: ufs_axi
-            - const: aggre2_ufs_axi
-            - const: aggre2_usb3_axi
-            - const: cfg_noc_usb2_axi
-
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: IPA Clock.
-            - description: UFS AXI Clock.
-            - description: Aggregate2 UFS AXI Clock.
-            - description: Aggregate2 USB3 AXI Clock.
-            - description: Config NoC USB2 AXI Clock.
-
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - qcom,msm8939-snoc
-    then:
-      patternProperties:
-        '^interconnect-[a-z0-9]+$': false
+unevaluatedProperties: false
 
 examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
 
       bimc: interconnect@400000 {
-              compatible = "qcom,msm8916-bimc";
-              reg = <0x00400000 0x62000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      pcnoc: interconnect@500000 {
-              compatible = "qcom,msm8916-pcnoc";
-              reg = <0x00500000 0x11000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
-      };
-
-      snoc: interconnect@580000 {
-              compatible = "qcom,msm8916-snoc";
-              reg = <0x00580000 0x14000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
+          compatible = "qcom,msm8916-bimc";
+          reg = <0x00400000 0x62000>;
+          #interconnect-cells = <1>;
       };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index a46497af1fd8..74ab080249ff 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -113,6 +113,7 @@ allOf:
         properties:
           compatible:
             enum:
+              - qcom,sdx65-mc-virt
               - qcom,sm8250-qup-virt
     then:
       required:
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
new file mode 100644
index 000000000000..8f6bc6399626
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Qualcomm SDM660 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC High-performance Bus Clock.
+
+        clock-names:
+          const: iface
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
+        clock-names:
+          items:
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    bimc: interconnect@1008000 {
+        compatible = "qcom,sdm660-bimc";
+        reg = <0x01008000 0x78000>;
+        #interconnect-cells = <1>;
+    };
+
+    a2noc: interconnect@1704000 {
+        compatible = "qcom,sdm660-a2noc";
+        reg = <0x01704000 0xc100>;
+        #interconnect-cells = <1>;
+        clocks = <&rpmcc RPM_SMD_IPA_CLK>,
+                 <&gcc GCC_UFS_AXI_CLK>,
+                 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+                 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+                 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
+        clock-names = "ipa",
+                      "ufs_axi",
+                      "aggre2_ufs_axi",
+                      "aggre2_usb3_axi",
+                      "cfg_noc_usb2_axi";
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
new file mode 100644
index 000000000000..71cf7e252bfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sdx75-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SDX75
+
+maintainers:
+  - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx75-clk-virt
+      - qcom,sdx75-dc-noc
+      - qcom,sdx75-gem-noc
+      - qcom,sdx75-mc-virt
+      - qcom,sdx75-pcie-anoc
+      - qcom,sdx75-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx75-clk-virt
+              - qcom,sdx75-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx75-clk-virt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC QPIC Clock
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clk_virt: interconnect-0 {
+            compatible = "qcom,sdx75-clk-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+            clocks = <&rpmhcc RPMH_QPIC_CLK>;
+    };
+
+    system_noc: interconnect@1640000 {
+            compatible = "qcom,sdx75-system-noc";
+            reg = <0x1640000 0x4b400>;
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
index b82ca03e969c..f322290ee516 100644
--- a/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -43,7 +43,12 @@ patternProperties:
     deprecated: true
 
   "^otp(-[0-9]+)?$":
-    $ref: ../nvmem/nvmem.yaml#
+    type: object
+
+    allOf:
+      - $ref: ../nvmem/nvmem.yaml#
+      - $ref: ../nvmem/nvmem-deprecated-cells.yaml#
+
     unevaluatedProperties: false
 
     description: |
diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
index 5474d63268dc..9518281007af 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
@@ -19,6 +19,7 @@ maintainers:
 allOf:
   - $ref: /schemas/mtd/partitions/partition.yaml#
   - $ref: /schemas/nvmem/nvmem.yaml#
+  - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
new file mode 100644
index 000000000000..3dde10de4630
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Simplelink CC1352P7 wireless MCU
+
+description:
+  The CC1352P7 MCU can be connected via SPI or UART.
+
+maintainers:
+  - Ayush Singh <ayushdevel1325@gmail.com>
+
+properties:
+  compatible:
+    const: ti,cc1352p7
+
+  clocks:
+    items:
+      - description: high-frequency main system (MCU and peripherals) clock
+      - description: low-frequency system clock
+
+  clock-names:
+    items:
+      - const: sclk_hf
+      - const: sclk_lf
+
+  reset-gpios:
+    maxItems: 1
+
+  vdds-supply: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serial {
+      mcu {
+        compatible = "ti,cc1352p7";
+        clocks = <&sclk_hf 0>, <&sclk_lf 25>;
+        clock-names = "sclk_hf", "sclk_lf";
+        reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+        vdds-supply = <&vdds>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index 0928ec408170..4424c3c5e75c 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
index e49c2754ff55..9801fe6f91b5 100644
--- a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
index 84b3dfd21e09..b5cf740f96fa 100644
--- a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
index e0860b6b85f3..d3abdafdbca0 100644
--- a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
+++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
@@ -16,6 +16,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 99e60d713dac..be1314454bec 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -16,6 +16,7 @@ description: |
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index 7ec2988b597e..cf5f9e22bb7e 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -16,6 +16,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
index a296d348adb4..cc25f2927682 100644
--- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -16,6 +16,7 @@ description: |
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index a9b822aeaa7e..f43186f98607 100644
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml
new file mode 100644
index 000000000000..951af28bbfb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-deprecated-cells.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM old syntax for fixed cells
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Before introducing NVMEM layouts all NVMEM (fixed) cells were defined
+  as direct device subnodes. That syntax was replaced by "fixed-layout"
+  and is deprecated now. No new bindings should use it.
+
+patternProperties:
+  "@[0-9a-f]+(,[0-7])?$":
+    type: object
+    allOf:
+      - $ref: layouts/fixed-cell.yaml
+      - properties:
+          compatible: false
+    deprecated: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 9f921d940142..4fd015d402ce 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -46,15 +46,6 @@ properties:
       container may reference more advanced (dynamic) layout
       parsers.
 
-patternProperties:
-  "@[0-9a-f]+(,[0-7])?$":
-    type: object
-    allOf:
-      - $ref: layouts/fixed-cell.yaml
-      - properties:
-          compatible: false
-    deprecated: true
-
 additionalProperties: true
 
 examples:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 8740938c32eb..8c8f05d9eaf1 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
index 9b133f783d29..2ada2099946d 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
@@ -16,6 +16,7 @@ description:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index cd980def97b8..068bedf5dbc9 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -16,6 +16,7 @@ description: |
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
index 9c6eff788928..a44d44b32809 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -49,6 +49,7 @@ required:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
index c5403e149080..b80fd8d1ae5b 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index efccc5aacbe0..e27cbae2d63a 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
index da3f1de7d281..af97eeb8316c 100644
--- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: nvmem.yaml#
+  - $ref: nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
index 36d97fb87865..9c36afc7084b 100644
--- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -51,6 +51,8 @@ properties:
   ethaddr:
     type: object
     description: Ethernet interfaces base MAC address.
+    additionalProperties: false
+
     properties:
       "#nvmem-cell-cells":
         description: The first argument is a MAC address offset.
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml
index 8bf7d3a9be98..3a4551253e3e 100644
--- a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml
@@ -13,6 +13,7 @@ maintainers:
 allOf:
   - $ref: rtc.yaml#
   - $ref: /schemas/nvmem/nvmem.yaml#
+  - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 9a1443ec3aaa..64b2ef083fdf 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -346,6 +346,8 @@ properties:
             # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface
           - silabs,si3210
             # Relative Humidity and Temperature Sensors
+          - silabs,si7005
+            # Relative Humidity and Temperature Sensors
           - silabs,si7020
             # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
           - skyworks,sky81452
diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml
new file mode 100644
index 000000000000..6142b0b5b534
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD SoCs USB Type-C Connector detection
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description:
+  Realtek digital home center (DHC) RTD series SoCs include a type c module.
+  This module is able to detect the state of type c connector.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-type-c
+      - realtek,rtd1312c-type-c
+      - realtek,rtd1315e-type-c
+      - realtek,rtd1319-type-c
+      - realtek,rtd1319d-type-c
+      - realtek,rtd1395-type-c
+      - realtek,rtd1619-type-c
+      - realtek,rtd1619b-type-c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: usb-cal
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      The phandle to nvmem cell that contains the trimming data.
+      The type c parameter trimming data specified via efuse.
+      If unspecified, default value is used.
+
+  realtek,rd-ctrl-gpios:
+    description: The gpio node to control external Rd on board.
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Properties for usb c connector.
+    type: object
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    type-c@7220 {
+        compatible = "realtek,rtd1619b-type-c";
+        reg = <0x7220 0x20>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>;
+        nvmem-cells = <&otp_usb_cal>;
+        nvmem-cell-names = "usb-cal";
+
+        connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            data-role = "dual";
+            power-role = "dual";
+        };
+    };