Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...

15 files changed, 217 insertions, 153 deletions

diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
deleted file mode 100644
index eaee06b2d8f2..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-== Introduction==
-
-LLCC (Last Level Cache Controller) provides last level of cache memory in SOC,
-that can be shared by multiple clients. Clients here are different cores in the
-SOC, the idea is to minimize the local caches at the clients and migrate to
-common pool of memory. Cache memory is divided into partitions called slices
-which are assigned to clients. Clients can query the slice details, activate
-and deactivate them.
-
-Properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "qcom,sdm845-llcc"
-
-- reg:
-	Usage: required
-	Value Type: <prop-encoded-array>
-	Definition: The first element specifies the llcc base start address and
-		    the size of the register region. The second element specifies
-		    the llcc broadcast base address and size of the register region.
-
-- reg-names:
-        Usage: required
-        Value Type: <stringlist>
-        Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
-
-- interrupts:
-	Usage: required
-	Definition: The interrupt is associated with the llcc edac device.
-			It's used for llcc cache single and double bit error detection
-			and reporting.
-
-Example:
-
-	cache-controller@1100000 {
-		compatible = "qcom,sdm845-llcc";
-		reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
-		reg-names = "llcc_base", "llcc_broadcast_base";
-		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
new file mode 100644
index 000000000000..558749065b97
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Last Level Cache Controller
+
+maintainers:
+  - Rishabh Bhatnagar <rishabhb@codeaurora.org>
+  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+
+description: |
+  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
+  that can be shared by multiple clients. Clients here are different cores in the
+  SoC, the idea is to minimize the local caches at the clients and migrate to
+  common pool of memory. Cache memory is divided into partitions called slices
+  which are assigned to clients. Clients can query the slice details, activate
+  and deactivate them.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-llcc
+      - qcom,sdm845-llcc
+
+  reg:
+    items:
+      - description: LLCC base register region
+      - description: LLCC broadcast base register region
+
+  reg-names:
+    items:
+      - const: llcc_base
+      - const: llcc_broadcast_base
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cache-controller@1100000 {
+      compatible = "qcom,sdm845-llcc";
+      reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+      reg-names = "llcc_base", "llcc_broadcast_base";
+      interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
new file mode 100644
index 000000000000..fcd3456afbbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -0,0 +1,29 @@
+OMAP PRM instance bindings
+
+Power and Reset Manager is an IP block on OMAP family of devices which
+handle the power domains and their current state, and provide reset
+handling for the domains and/or separate IP blocks under the power domain
+hierarchy.
+
+Required properties:
+- compatible:	Must contain one of the following:
+		"ti,am3-prm-inst"
+		"ti,am4-prm-inst"
+		"ti,omap4-prm-inst"
+		"ti,omap5-prm-inst"
+		"ti,dra7-prm-inst"
+		and additionally must contain:
+		"ti,omap-prm-inst"
+- reg:		Contains PRM instance register address range
+		(base address and length)
+
+Optional properties:
+- #reset-cells:	Should be 1 if the PRM instance in question supports resets.
+
+Example:
+
+prm_dsp2: prm@1b00 {
+	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+	reg = <0x1b00 0x40>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index a4fe136be2ba..18c3aea90df2 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -11,7 +11,9 @@ power management service, FPGA service and other platform management
 services.
 
 Required properties:
- - compatible:	Must contain:	"xlnx,zynqmp-firmware"
+ - compatible:	Must contain any of below:
+		"xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
+		"xlnx,versal-firmware" for Versal
  - method:	The method of calling the PM-API firmware layer.
 		Permitted values are:
 		  - "smc" : SMC #0, following the SMCCC
@@ -21,6 +23,8 @@ Required properties:
 Example
 -------
 
+Zynq Ultrascale+ MPSoC
+----------------------
 firmware {
 	zynqmp_firmware: zynqmp-firmware {
 		compatible = "xlnx,zynqmp-firmware";
@@ -28,3 +32,13 @@ firmware {
 		...
 	};
 };
+
+Versal
+------
+firmware {
+	versal_firmware: versal-firmware {
+		compatible = "xlnx,versal-firmware";
+		method = "smc";
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
index 2e0723ab3384..f7b3ed74db54 100644
--- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: should be "amlogic,meson-gxbb-efuse"
 - clocks: phandle to the efuse peripheral clock provided by the
 	  clock controller.
+- secure-monitor: phandle to the secure-monitor node
 
 = Data cells =
 Are child nodes of eFuse, bindings of which as described in
@@ -16,6 +17,7 @@ Example:
 		clocks = <&clkc CLKID_EFUSE>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+		secure-monitor = <&sm>;
 
 		sn: sn@14 {
 			reg = <0x14 0x10>;
@@ -30,6 +32,10 @@ Example:
 		};
 	};
 
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
 = Data consumers =
 Are device nodes which consume nvmem data cells.
 
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
index eb35b22f9e23..bc75bf49cdae 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
@@ -5,6 +5,7 @@ which then translates it into a corresponding voltage on a rail
 
 Required Properties:
  - compatible: Should be one of the following
+	* qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC
 	* qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
 	* qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
 	* qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
index 26e542eb96df..43e580ef64ba 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
@@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or
 disables the access of Audio FIFOs to DDR on AXG based SoC.
 
 Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb'
+- compatible: 'amlogic,meson-axg-audio-arb' or
+	      'amlogic,meson-sm1-audio-arb'
 - reg: physical base address of the controller and length of memory
        mapped region.
 - clocks: phandle to the fifo peripheral clock provided by the audio
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 00917d868d58..b3f57d81f007 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -16,6 +16,7 @@ properties:
       - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
       - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+      - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
deleted file mode 100644
index 510c748656ec..000000000000
--- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Qualcomm AOSS Reset Controller
-======================================
-
-This binding describes a reset-controller found on AOSS-CC (always on subsystem)
-for Qualcomm SDM845 SoCs.
-
-Required properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,sdm845-aoss-cc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the register
-	            space.
-
-- #reset-cells:
-	Usage: required
-	Value type: <uint>
-	Definition: must be 1; cell entry represents the reset index.
-
-Example:
-
-aoss_reset: reset-controller@c2a0000 {
-	compatible = "qcom,sdm845-aoss-cc";
-	reg = <0xc2a0000 0x31000>;
-	#reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For list of all valid reset indicies see
-<dt-bindings/reset/qcom,sdm845-aoss.h>
-
-Example:
-
-modem-pil@4080000 {
-	...
-
-	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
-	reset-names = "mss_restart";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
new file mode 100644
index 000000000000..e2d85a1e1d63
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm AOSS Reset Controller
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  The bindings describe the reset-controller found on AOSS-CC (always on
+  subsystem) for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-aoss-cc"
+          - const: "qcom,sdm845-aoss-cc"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-aoss-cc"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aoss_reset: reset-controller@c2a0000 {
+      compatible = "qcom,sdm845-aoss-cc";
+      reg = <0xc2a0000 0x31000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
deleted file mode 100644
index a62a492843e7..000000000000
--- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-PDC Global
-======================================
-
-This binding describes a reset-controller found on PDC-Global (Power Domain
-Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
-
-Required properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,sdm845-pdc-global"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the register
-	            space.
-
-- #reset-cells:
-	Usage: required
-	Value type: <uint>
-	Definition: must be 1; cell entry represents the reset index.
-
-Example:
-
-pdc_reset: reset-controller@b2e0000 {
-	compatible = "qcom,sdm845-pdc-global";
-	reg = <0xb2e0000 0x20000>;
-	#reset-cells = <1>;
-};
-
-PDC reset clients
-======================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For a list of all valid reset indices see
-<dt-bindings/reset/qcom,sdm845-pdc.h>
-
-Example:
-
-modem-pil@4080000 {
-	...
-
-	resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
-	reset-names = "pdc_reset";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
new file mode 100644
index 000000000000..d7d8cec9419f
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PDC Global
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  The bindings describes the reset-controller found on PDC-Global (Power Domain
+  Controller) block for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-pdc-global"
+          - const: "qcom,sdm845-pdc-global"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-pdc-global"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pdc_reset: reset-controller@b2e0000 {
+      compatible = "qcom,sdm845-pdc-global";
+      reg = <0xb2e0000 0x20000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index ea005177d20a..e320a8cc9e4d 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -130,6 +130,7 @@ this layer. These clocks and resets should be described in each property.
 Required properties:
 - compatible: Should be
     "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+    "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
     "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
     "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
     "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
@@ -141,12 +142,12 @@ Required properties:
 - clocks: A list of phandles to the clock gate for the glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 - resets: A list of phandles to the reset control for the glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 
 Example:
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e1ccd5..5a33619d881d 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -5,7 +5,7 @@ and power management.
 
 Required properites:
   - reg : Offset and length of the register set of the RCPM block.
-  - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+  - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
 	fsl,rcpm-wakeup property.
   - compatible : Must contain a chip-specific RCPM block compatible string
 	and (if applicable) may contain a chassis-version RCPM compatible
@@ -20,6 +20,7 @@ Required properites:
 	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
 	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
 	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+	* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
 
 All references to "1.0" and "2.0" refer to the QorIQ chassis version to
 which the chip complies.
@@ -27,14 +28,19 @@ Chassis Version		Example Chips
 ---------------		-------------------------------
 1.0				p4080, p5020, p5040, p2041, p3041
 2.0				t4240, b4860, b4420
-2.1				t1040, ls1021
+2.1				t1040,
+2.1+				ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+   will be Big Endian (default case).
 
 Example:
 The RCPM node for T4240:
 	rcpm: global-utilities@e2000 {
 		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
 		reg = <0xe2000 0x1000>;
-		fsl,#rcpm-wakeup-cells = <2>;
+		#fsl,rcpm-wakeup-cells = <2>;
 	};
 
 * Freescale RCPM Wakeup Source Device Tree Bindings
@@ -44,7 +50,7 @@ can be used as a wakeup source.
 
   - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
 	register cells. The number of IPPDEXPCR register cells is defined in
-	"fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+	"#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
 	the bit mask that should be set in IPPDEXPCR0, and the second register
 	cell is for IPPDEXPCR1, and so on.
 
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
index f3fa313963d5..616fddcd09fd 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
@@ -22,6 +22,7 @@ resources.
 		    "qcom,rpm-apq8084"
 		    "qcom,rpm-msm8916"
 		    "qcom,rpm-msm8974"
+		    "qcom,rpm-msm8976"
 		    "qcom,rpm-msm8998"
 		    "qcom,rpm-sdm660"
 		    "qcom,rpm-qcs404"